fea-2107 fea-2107-bb fea-2107-d fea-2807 model ... - furuno i foreword the purpose of this manual is

Download FEA-2107 FEA-2107-BB FEA-2107-D FEA-2807 MODEL ... - Furuno i Foreword The purpose of this manual is

Post on 17-Jan-2020

2 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • Electronic Chart Display and � Information System (ECDIS)

    OPERATOR'S MANUAL

    www.furuno.co.jp

    MODEL

    FEA-2107� FEA-2107-BB FEA-2107-D FEA-2807 FEA-2807-D

    Instructions for use with Autopilots:� FAP-2000 PT-500A(CAT B, CAT C)� PR-6000

  • The paper used in this manual

    is elemental chlorine free.

    ・FURUNO Authorized Distributor/Dealer

    9-52 Ashihara-cho,

    Nishinomiya, 662-8580, JAPAN

    Telephone : +81-(0)798-65-2111

    Fax : +81-(0)798-65-4200

    A : SEP 2010.Printed in JapanAll rights reserved. B : NOV . 12, 2010

    Pub. No. OME-41224-B

    *00017443611**00017443611*(DAMI ) FEA-2x07 AUTOPILOT *00017443611**00017443611*

    * 0 0 0 1 7 4 4 3 6 1 1 *

  • i

    Foreword The purpose of this manual is to provide the instructions for how to use the Autopilots FAP-2000, PT-500A(CAT B and CAT C)1 and PR-60002 with the FURUNO FEA-2107-D, FEA-2107-BB-D, FEA-2807-D Electronic Chart Display and Information System (ECDIS). For ECDIS operating information, see its Operator's Manual.

    1 PT-500A(CAT B and CAT C) are products of YOKOGAWA ELECTRIC CORPORATION. 2 PR-6000 is a product of TOKYO KEIKI INC

    Important Notices • The operator of this equipment must read and follow the descriptions in this manual. Wrong operation can cancel

    the warranty or cause injury.

    • Do not copy any part of this manual without written permission from FURUNO. • If this manual is lost or worn, contact your dealer about replacement. • The contents of this manual and equipment specifications can change without notice. • The example screens (or illustrations) shown in this manual can be different from the screens you see on your

    display. The screens you see depend on your system configuration and equipment settings.

    • Save this manual for future reference. • Any modification of the equipment (including software) by persons not authorized by FURUNO will cancel the

    warranty.

    • All brand and product names are trademarks, registered trademarks or service marks of their respective holders.

  • Safety Instructions

    ii

    WARNING Indicates a condition that can cause death or serious injury ifnot avoided.

    CAUTION Indicates a condition that can cause minor or moderate injury if not avoided.

    Warning, Caution Mandatory Action Prohibitive Action

    WARNING Do not open the equipment.

    This equipment uses high voltage that can cause electrical shock. Only qualified persons can work inside the equipment.

    Turn off power at switchboard if the something is dropped inside the equipment.

    Fire or electrical shock can result if the power remains on.

    Turn off power at switchboard if the equipment is emitting smoke or fire.

    Fire or electrical shock can result if the power remains on.

    Do not place liquid filled containers on the top of the equipment.

    Fire or electrical shock can result if a liquid spills into the equipment.

    Do not dissassemble or modify the equipment.

    Fire, electrical shock or bodily injury can result.

    Do not operate the equipment with wet hands.

    Fire or electrical shock can result.

    Keep the equipment away from rain, water and water splash.

    Fire or electrical shock can result if water gets into the equipment.

    Use the correct fuse.

    Use of a wrong fuse can cause bodily injury or fire.

    The CPU board (PCG820 or 24P0100) in the processor unit has a lithium battery. The battery should only be replaced by a qualified tech- nician.

    The battery may burst if it is the wrong type.

    CAUTION

    WARNING LABEL A warning label is attached to the processor unit. Do not remove the label. If the label is missing or damaged, contact a FURUNO agent or dealer about replacement.

    WARNING To avoid electrical shock, do not remove cover. No user-serviceable parts inside.

    Name: Warning Label (1) Type: 86-003-1011-0 Code No.: 100-236-230

    Safety Instructions

  • iii

    Table of Contents SYSTEM CONFIGURATION .......................................................................................................vii

    1. FURUNO Autopilot FAP-2000 ..............................................................................................1-1 1.1 Introduction ............................................................................................................................. 1-1 1.2 Control Panel ........................................................................................................................... 1-1 1.3 Steering Modes ........................................................................................................................ 1-3

    1.3.1 Hand steering modes .................................................................................................. 1-3 1.3.2 Autopilot steering modes ............................................................................................ 1-3 1.3.3 Route steering modes.................................................................................................. 1-5

    1.4 Additional Information About Steering Modes.................................................................... 1-16 1.5 Important Information About Steering Mode Changes ...................................................... 1-18 1.6 Autopilot Display in Sidebar................................................................................................. 1-19 1.7 Expected Steering Performance Under Various Conditions............................................... 1-20

    1.7.1 Expected steering performance for going ahead ..................................................... 1-20 1.7.2 Expected steering performance for turns ................................................................ 1-23

    1.8 Expected Steering Performance Under Critical Failure..................................................... 1-25 1.8.1 Lost heading from autopilot (ECDIS may also have lost heading)........................ 1-25 1.8.2 Lost heading from ECDIS (autopilot still has heading) ......................................... 1-25 1.8.3 Lost speed .................................................................................................................. 1-26 1.8.4 Low speed .................................................................................................................. 1-26 1.8.5 Lost SOG/COG reference.......................................................................................... 1-27 1.8.6 Total lost position ...................................................................................................... 1-28 1.8.7 Lost differential position .......................................................................................... 1-29 1.8.8 Lost differential position and position discrepancy ................................................ 1-30 1.8.9 Lost communication between ECDIS and autopilot............................................... 1-30 1.8.10 Lost communication between autopilot and ECDIS ............................................... 1-30

    1.9 Other Operations................................................................................................................... 1-31 1.10 Alerts ...................................................................................................................................... 1-31

    1.10.1 Alerts generated by autopilot ................................................................................... 1-31 1.10.2 Alerts generated by ECDIS ...................................................................................... 1-32 1.10.3 Error alerts generated by autopilot ......................................................................... 1-37

    1.11 How to Use the Curved EBL................................................................................................. 1-38 1.11.1 What is the curved EBL? .......................................................................................... 1-38 1.11.2 Structure of the curved EBL..................................................................................... 1-39 1.11.3 How to design a new turn while the ship is turning............................................... 1-39

    1.12 How to Use the Predictor ...................................................................................................... 1-40

    2. YOKOGAWA Autopilot PT-500A (category B) .......................................................................2-1 2.1 Introduction ............................................................................................................................. 2-1 2.2 Steering Control Unit.............................................................................................................. 2-1 2.3 Steering Modes ........................................................................................................................ 2-2

    2.3.1 Hand steering mode (Mode selector: HAND) ............................................................ 2-2 2.3.2 Autopilot steering mode (Mode selector: AUTO)....................................................... 2-2 2.3.3 Route steering mode (Mode selector: NAVI).............................................................. 2-2

    2.4 Other Operations................................................................................................................... 2-10 2.5 Alerts Generated by ECDIS.................................................................................................