f01u261693-01 security system user guide (d1255...

1

SecuritySecuritySecuritySecuritySecurityS y s t e mS y s t e mS y s t e mS y s t e mS y s t e mUser’s GuideUser’s GuideUser’s GuideUser’s GuideUser’s Guide

3

Table of Contents

IntroductionIntroductionIntroductionIntroductionIntroduction ............................................................................................................................................................................................................................................................... 7 About This Users Guide ............................... 7Using the Command CenterUsing the Command CenterUsing the Command CenterUsing the Command CenterUsing the Command Center ........................................................................................................................ 9 Command Center Function Keys .................. 9

COMMAND ............................................ 9ENT/YES ................................................ 9ESC/MENU ............................................ 9PREV (Previous) .................................. 10NEXT.................................................... 10

Security System BasicsSecurity System BasicsSecurity System BasicsSecurity System BasicsSecurity System Basics ................................................................................................................................................. 11 What is a Point? ........................................ 11 Controlled Points ...................................... 11

Perimeter Points .................................. 11Interior Points ..................................... 1124-Hour Points .................................... 12Fire Points ........................................... 12Non-Fire Points ................................... 12

Custom DisplayCustom DisplayCustom DisplayCustom DisplayCustom Display ....................................................................................................................................................................................................................... 13View Faulted or Bypassed PointsView Faulted or Bypassed PointsView Faulted or Bypassed PointsView Faulted or Bypassed PointsView Faulted or Bypassed Points ............................................................ 15 Automatically Scroll Points ....................... 15 Manually Scroll Points ............................... 15

Warning Displays and Tones ...................... 16 Command Center Quiets ............................ 16 Priority of Events ....................................... 16AlarmsAlarmsAlarmsAlarmsAlarms ....................................................................................................................................................................................................................................................................................................... 17 Fire Alarms ................................................ 17 Burglary Alarms ......................................... 18TTTTTrrrrrouble Evouble Evouble Evouble Evouble Eventententententsssss ................................................................................................................................................................................................................................. 19 Fire Trouble Events .................................... 19 Special Fire Trouble Display ...................... 19 Non-Fire Trouble Events ............................. 19 Special System Trouble Display ................. 20

Cleared Events ..................................... 20Entry Delay Tone and Display ............... 20Exit Delay Tone and Display ................. 21Keystroke Checking Tones ................... 21

Silencing an Alarm ....................................... 21 How Your System Reports Alarms ............... 21System Commands and FunctionsSystem Commands and FunctionsSystem Commands and FunctionsSystem Commands and FunctionsSystem Commands and Functions ....................................................... 23Arming/DisarmingArming/DisarmingArming/DisarmingArming/DisarmingArming/Disarming ................................................................................................................................................................................................... 2525252525 Turning the System On (Arming) ................ 25 Turning the System Off (Disarming) ........... 25

4

Turning the System On (Arming) With a Duress Passcode ........................... 26 Turning the System On (Arming) With Doors or Windows Open .................. 26

NOT BYPASSABLE ............................. 27TOO MANY BYPASSD ......................... 27TOO MANY FAULTED .......................... 27NOT AUTHORIZED ............................... 27

MASTER ARM ?MASTER ARM ?MASTER ARM ?MASTER ARM ?MASTER ARM ? ............................................................................................................................................................................................................................ 2929292929 Turn the Entire System On With Delays ...... 29 Using Master Arm ....................................... 29MASTER ARM INST?MASTER ARM INST?MASTER ARM INST?MASTER ARM INST?MASTER ARM INST? ............................................................................................................................................................................... 3131313131 Turn the Entire System On Without Delays . 31 Using Master Arm Inst ................................ 31PERIMETR INST ?PERIMETR INST ?PERIMETR INST ?PERIMETR INST ?PERIMETR INST ? ................................................................................................................................................................................................... 3333333333 Turn On the Perimeter With No Delays ........ 33 Using Perimetr Inst ..................................... 33PERIMETR DELPERIMETR DELPERIMETR DELPERIMETR DELPERIMETR DELAAAAAY ?Y ?Y ?Y ?Y ? ......................................................................................................................................................................................... 3535353535 Turn On the Perimeter With Delays ............. 35 Using Perimetr Delay .................................. 35Silence tSilence tSilence tSilence tSilence the The The The The Trrrrrouble Sounder &ouble Sounder &ouble Sounder &ouble Sounder &ouble Sounder & Cle Cle Cle Cle Clear Tar Tar Tar Tar Trrrrrouble Displaouble Displaouble Displaouble Displaouble Displayyyyy ...................................................................................................................................................... 3737373737 Using COMMAND 4 ..................................... 37VIEW MEMORY ?VIEW MEMORY ?VIEW MEMORY ?VIEW MEMORY ?VIEW MEMORY ? .................................................................................................................................................................................................................. 3939393939

View Event Memory .................................... 39 Using View Memory .................................... 39WALK TEST ?WALK TEST ?WALK TEST ?WALK TEST ?WALK TEST ? ................................................................................................................................................................................................................................................ 4141414141 Walk Test .................................................... 41 Using Walk Test .......................................... 41RESET SENSORS ?RESET SENSORS ?RESET SENSORS ?RESET SENSORS ?RESET SENSORS ? .............................................................................................................................................................................................. 4343434343 Reset Sensors ............................................. 43 Using Reset Sensors ................................... 43WWWWWAAAAATTTTTCCCCCH MODE ?H MODE ?H MODE ?H MODE ?H MODE ? ............................................................................................................................................................................................................................ 4545454545 Watch Mode ................................................ 45 Entering Watch Mode .................................. 45 Exiting Watch Mode .................................... 46PERIMETR PPERIMETR PPERIMETR PPERIMETR PPERIMETR PARARARARART ?T ?T ?T ?T ? ........................................................................................................................................................................................................ 4747474747 Partially Turn On the Perimeter ................... 47 Using Perimetr Part .................................... 47Special AlertsSpecial AlertsSpecial AlertsSpecial AlertsSpecial Alerts ........................................................................................................................................................................................................................................... 4949494949 Using COMMAND 7 ..................................... 50 Using COMMAND 9 ..................................... 50Security System LimitationsSecurity System LimitationsSecurity System LimitationsSecurity System LimitationsSecurity System Limitations ......................................................................................................... 5151515151FFFFFiririririre Safe Safe Safe Safe Safeeeeety and Evty and Evty and Evty and Evty and Evacuaacuaacuaacuaacuationtiontiontiontion ........................................................................................................................ 5353535353Standard DisplaysStandard DisplaysStandard DisplaysStandard DisplaysStandard Displays ................................................................................................................................................................................................... 5555555555

SYSTEM COMMAND ................................. 55DISARM NOW ........................................... 55EXIT NOW ................................................. 55

5

NO AUTHORITY ......................................... 55NOT AUTHORIZED ..................................... 55PERIMETR DELAY ..................................... 55PERIMETR INSTANT.................................. 55FIRST DISARM .......................................... 55

SySySySySyssssstttttem Tem Tem Tem Tem Trrrrrouble Displaouble Displaouble Displaouble Displaouble Displayyyyysssss ............................................................................................................................................ 57CALL FOR SERVICE ................................. 57SERVC PANEL. ........................................... 57SERVC PARAM ........................................... 57SERVC AC FAIL ........................................ 57SERVC BATT LOW.................................... 57SERVC BATT MSING ................................ 57SERVC COMM FAIL.................................. 57SERVC KEYPAD ......................................... 57SERVC PH LINE #1 (OR 2) ...................... 58SERVC PRINTER ....................................... 58SERVC PT BUS # .................................... 58ALARM SILENCED...................................... 58FIRE BYPASS ............................................. 5824 HOUR BYPASS ...................................... 58

SecurSecurSecurSecurSecurity Syity Syity Syity Syity Syssssstttttem Glosem Glosem Glosem Glosem Glossarsarsarsarsaryyyyy .................................................................................................................................. 5959595959MaintMaintMaintMaintMaintenance and Serenance and Serenance and Serenance and Serenance and Servicevicevicevicevice ....................................................................................................................................... 6363636363 How to Clean the Command Center ............ 63

7

IntroductionIntroductionIntroductionIntroductionIntroduction

Security systems help to secure life, property, andinvestments against fire, theft, and bodily harm. Thecontrol center is an advanced digital device that offersa variety of features not available with other systems.Its highly visible, back-lit display and built-in sounderalert you to a number of system events. Stylish designand ease-of-use make it ideal for property protection.

Your security company can program the system to meetyour individual needs. Your property is given its ownEnglish language description that appears in thedisplay.

About This Users GuideAbout This Users GuideAbout This Users GuideAbout This Users GuideAbout This Users GuideThis users guide covers basic system commands, suchas turning the system on and off. It is designed to bean everyday type of reference for system users. Thefunctions described in this guide are programmed byyour security company. Some of them may not beincluded in your system. Some of the functions covered

may require you to enter your personal passcode.

Throughout this guide the ##### symbol refers to a variablenumerical quantity, such as the number of points totest or exit delay time. Messages that appear in thedisplay appear in this guide in CAPITAL, BOLD ANDCAPITAL, BOLD ANDCAPITAL, BOLD ANDCAPITAL, BOLD ANDCAPITAL, BOLD ANDITALICITALICITALICITALICITALIC. Keys that are pressed on the keypad appear inCAPITAL AND BOLDCAPITAL AND BOLDCAPITAL AND BOLDCAPITAL AND BOLDCAPITAL AND BOLD.

9

Using the Command Center

The security system provides quick access to functionsby pressing the COMMANDCOMMANDCOMMANDCOMMANDCOMMAND bar and one or twoadditional keys.

Another way to access functions is through theCommand Menu. Access the Command Menu bypressing the MENUMENUMENUMENUMENU key. Pressing the PREVPREVPREVPREVPREV or NEXTNEXTNEXTNEXTNEXTkey allows you to scroll up or down through the list offunctions programmed by your security company.Pressing the ENTENTENTENTENT key initiates the function displayed.To exit the Command Menu, press the ESC ESC ESC ESC ESC key. Usethe Command Menu to locate functions you don’t useoften or that don’t have a command number.

Command CentCommand CentCommand CentCommand CentCommand Center Fer Fer Fer Fer Function Kunction Kunction Kunction Kunction KeeeeeyyyyysssssThe command center has five function keys. These keysare used to control the system.

COMMANDCOMMANDCOMMANDCOMMANDCOMMANDUse the COMMAND COMMAND COMMAND COMMAND COMMAND bar in combination with one ortwo numeric keys to perform a function.

ENT/YESENT/YESENT/YESENT/YESENT/YESThe ENT ENT ENT ENT ENT (Enter)/YES /YES /YES /YES /YES key has two functions. The firstis to complete the entry of your passcode at thecommand center. Whenever a function requires thatyou enter your passcode, first press the digits of thecode and then press the ENT ENT ENT ENT ENT key. The system doesnot recognize your passcode until you press ENTENTENTENTENT.

The second function of the ENT/YES ENT/YES ENT/YES ENT/YES ENT/YES key is to selectthe menu item displayed. Some menu items requireyour personal passcode be entered before starting thefunction. Remember to press ENT ENT ENT ENT ENT after entering yourpasscode.

ESC/MENUESC/MENUESC/MENUESC/MENUESC/MENUThe ESC ESC ESC ESC ESC (Escape)/MENU/MENU/MENU/MENU/MENU key has two functions. First,the ESC/MENUESC/MENUESC/MENUESC/MENUESC/MENU key is used to enter the CommandMenu. Press this key when at idle text to go to the firstitem in the menu.

Second, pressing ESCESCESCESCESC returns to the idle display.

10

PREVPREVPREVPREVPREV (Previous)When viewing a list, pressing the PREV PREV PREV PREV PREV key takes youback to the previously shown item.

NEXTNEXTNEXTNEXTNEXTPress the NEXT NEXT NEXT NEXT NEXT key to pass over the present item in amenu or list.

11

SecurSecurSecurSecurSecurity Syity Syity Syity Syity Syssssstttttem Baem Baem Baem Baem Basicssicssicssicssics

What is a Point?What is a Point?What is a Point?What is a Point?What is a Point?A “point” is a detection device, or group of devicesconnected to the security system. Points displayindividually with custom text. The text can describe asingle door, motion sensor, smoke detector, or an areasuch as UPSTAIRS or GARAGE. There are two basictypes of points, controlled and 24-hour.

Controlled PointsControlled PointsControlled PointsControlled PointsControlled PointsControlled points respond to alarm conditionsdepending upon whether the system is turned on(armed) or turned off (disarmed). Controlled pointsare programmed to respond instantly to alarmconditions or to provide a delay for you to reach thecommand center and disarm the system. The wordsA1 # ALARMSA1 # ALARMSA1 # ALARMSA1 # ALARMSA1 # ALARMS appear before the point text when thereis an alarm. There are two types of controlled points,perimeter points and interior points.

Perimeter PointsPerimeter PointsPerimeter PointsPerimeter PointsPerimeter PointsThese points usually include all exterior doors andwindows of the building.

Interior PointsInterior PointsInterior PointsInterior PointsInterior PointsThese points usually include interior forms of burglarydetection devices, such as carpet mats, motion sensors,or inside doors, for example.

12

24-Hour Points24-Hour Points24-Hour Points24-Hour Points24-Hour Points24-hour points are always on, even when the burglarysystem is disarmed (turned off). There are two typesof 24-hour points, fire points and non-fire points.

Fire PointsFire PointsFire PointsFire PointsFire PointsFire points exclusively monitor fire detection devices.They are always armed and cannot be disarmed. Firepoints can be clearly distinguished from other non-fire points. When there is a fire alarm, the textidentifying the point as a fire point is displayed;pressing the PREV PREV PREV PREV PREV key causes the summary display,such as A1 # FIRE ALARMA1 # FIRE ALARMA1 # FIRE ALARMA1 # FIRE ALARMA1 # FIRE ALARM to appear in the displayand pressing NEXT NEXT NEXT NEXT NEXT displays any other points in alarm.Fire alarms have a unique audible warning signal.

Non-Fire PointsNon-Fire PointsNon-Fire PointsNon-Fire PointsNon-Fire PointsNon-fire points are always armed and cannot bedisarmed.

13

CusCusCusCusCustttttom Displaom Displaom Displaom Displaom Displayyyyy

“At an idle state” means that the system is not currently performing a function entered by a user and there areno active alarms. There are three idle states:

• Turned on (Armed)

• Turned off (Disarmed) with no points faulted (doors or windows open) in the area

• Turned off with faulted points (doors or windows open) in the area

This guide uses the default idle state displays for examples of these idle states. Your security company mayprogram custom text for the idle displays in your system. The custom text and the default text for the threesystem idle displays follow.

Custom DisplaysCustom DisplaysCustom DisplaysCustom DisplaysCustom Displays Default Text / FunctionDefault Text / FunctionDefault Text / FunctionDefault Text / FunctionDefault Text / Function

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ AREAAREAAREAAREAAREA_____IS ONIS ONIS ONIS ONIS ONIndicates the area is turned on (armed) and ready to detect intruders.

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ AREA AREA AREA AREA AREA _ _ _ _ _ IS OFF IS OFF IS OFF IS OFF IS OFFIndicates the area is turned off (disarmed). 24-hour points remainarmed.

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ AREA AREA AREA AREA AREA _ _ _ _ _ NOT READY NOT READY NOT READY NOT READY NOT READYIndicates that the area is turned off, but not ready to arm. Perimeterand/or interior points are faulted (doors or windows open).

15

If there are bypassed points, AREA 1 ## BYPASAREA 1 ## BYPASAREA 1 ## BYPASAREA 1 ## BYPASAREA 1 ## BYPAS(## = total number of bypassed points) isdisplayed, followed by the point textdescriptions of the bypassed points. Thesedisplays scroll at the rate of 2 seconds each. Ifthere are no faulted or bypassed points, thedisplays do not appear. Instead, the displayshows NO FAULTS/BYPASNO FAULTS/BYPASNO FAULTS/BYPASNO FAULTS/BYPASNO FAULTS/BYPAS.

3. The display returns to idle text after scrollingthrough the faulted and bypassed pointinformation. Press ESCESCESCESCESC to stop the display fromscrolling.

To manually scroll faulted or bypassedTo manually scroll faulted or bypassedTo manually scroll faulted or bypassedTo manually scroll faulted or bypassedTo manually scroll faulted or bypassedpoints:points:points:points:points:

1. Ensure the display shows idle text.

2. Press the NEXT NEXT NEXT NEXT NEXT key repeatedly to display thefaulted and bypassed point information. If thereare no faulted or bypassed points the displayshows NO FAULTS/BYPASNO FAULTS/BYPASNO FAULTS/BYPASNO FAULTS/BYPASNO FAULTS/BYPAS.

3. Return to idle text at any time by pressing ESCESCESCESCESC.

To properly arm the system, all the doors and windowsin the system must be in the normal (not faulted)condition. Viewing the faulted points helps you findfaulted points and correct them so proper arming ispossible.

The command center offers two ways of displayingfaulted and bypassed point information. The firstcauses the faulted or bypassed point information toscroll automatically through the display. The secondallows you to manually scroll through each individualpoint description.

To automatically scroll faulted or bypassedTo automatically scroll faulted or bypassedTo automatically scroll faulted or bypassedTo automatically scroll faulted or bypassedTo automatically scroll faulted or bypassedpoints:points:points:points:points:

1. Ensure the display shows idle text.

2. Press any number key. If there are faulted points,AREA 1 ## FAULTAREA 1 ## FAULTAREA 1 ## FAULTAREA 1 ## FAULTAREA 1 ## FAULT (## = total number of faultedpoints) is displayed first. This display isfollowed by the point text descriptions of thefaulted points.

VVVVVieieieieiew Fw Fw Fw Fw Faultaultaultaultaulteeeeed or Bypad or Bypad or Bypad or Bypad or Bypassssssesesesesed Pd Pd Pd Pd Pointointointointointsssss

16

WWWWWarararararning Displaning Displaning Displaning Displaning Displayyyyys and Ts and Ts and Ts and Ts and ToneoneoneoneonesssssThe command center emits one of several distinct tonesand displays custom text to alert you to system events.Additional bells or sirens may also be connected tothe system. Bells or sirens mounted on the exterior ofthe premises alert neighbors to emergencies andprovide an audible guide for police and fire fighters.

Command Center Quiets forCommand Center Quiets forCommand Center Quiets forCommand Center Quiets forCommand Center Quiets forKKKKKeeeeeyyyyyssssstrtrtrtrtrokokokokokeeeeesssssPressing any key on the keypad lights the keys and quietsany warning tones. If another key is not pressed within20 seconds, the keypad lights go out and the warningtones resume.

Priority of EventsPriority of EventsPriority of EventsPriority of EventsPriority of EventsIf more than one event occurs, the system sorts theminto one of four groups. The groups (highest priorityfirst) are: Fire Alarms, Burglary Alarms, Fire Troubles,and Non-Fire Troubles.

The group with the highest priority scrolls first.Descriptions of the tones and displays for each groupand instructions for silencing the tones are included inthe descriptions that follow.

17

AlarmsAlarmsAlarmsAlarmsAlarms

FFFFFiririririre Alare Alare Alare Alare AlarmsmsmsmsmsFire alarms are the highest priority events. When a firepoint activates, the control center emits a pulsatinghigh-pitched fire tone. Evacuate all occupants andinvestigate for smoke or fire. Ensure that all occupantsknow the difference between the burglary tone and thefire tone. The tone sounds for the time set by yoursecurity company.

The display shows the point text of the first point thatwent into fire alarm. Press the NEXT NEXT NEXT NEXT NEXT key to manuallydisplay additional points (if any) that went into alarm.Events scroll from the oldest to the newest.

Silencing Fire AlarmsSilencing Fire AlarmsSilencing Fire AlarmsSilencing Fire AlarmsSilencing Fire AlarmsEntering a personal passcode with the proper authoritylevel silences a fire alarm and disarms the system if itis armed. The system now displays ALARM SILENCEDALARM SILENCEDALARM SILENCEDALARM SILENCEDALARM SILENCEDand then the number of points in alarm (A1 ## FIREA1 ## FIREA1 ## FIREA1 ## FIREA1 ## FIREALARMALARMALARMALARMALARM) and the custom text of all the points in alarm,in the order of occurrence. The system can be

programmed so that some fire alarms cannot besilenced until the fire event clears. Entering COMMAND4 clears the scrolling point text from the display. TheALARM SILENCED ALARM SILENCED ALARM SILENCED ALARM SILENCED ALARM SILENCED message continues to scroll as areminder that it is still possible to view the text of thepoints in alarm by using the View Memory function.See VIEW MEMORY ?VIEW MEMORY ?VIEW MEMORY ?VIEW MEMORY ?VIEW MEMORY ? (COMMAND 40) for moreinformation. To clear the event memory and removethe ALARM SILENCED ALARM SILENCED ALARM SILENCED ALARM SILENCED ALARM SILENCED message from the display, entera valid passcode and press the ESCESCESCESCESC key, or re-arm thearea.

If a fire trouble still exists, the display shows FIREFIREFIREFIREFIRETROUBLETROUBLETROUBLETROUBLETROUBLE. To remove this display, the fire point(s)must be returned to normal. If you wish to reviewcleared events, use COMMAND 4 0.

18

BurBurBurBurBurglarglarglarglarglary Alary Alary Alary Alary AlarmsmsmsmsmsBurglary alarms are the second priority. When a burglarypoint activates while the system is armed, thecommand center emits a steady high-pitched burglarytone. The tone sounds for the time set by your securitycompany.

The keypad display shows the number of burglary pointsactivated (A1 ## ALARMSA1 ## ALARMSA1 ## ALARMSA1 ## ALARMSA1 ## ALARMS) and then custom text foreach activated point. Press NEXTNEXTNEXTNEXTNEXT to manually scrollthe list if you wish. Events scroll from the oldest tothe newest.

Silencing BurSilencing BurSilencing BurSilencing BurSilencing Burglarglarglarglarglary Alary Alary Alary Alary AlarmsmsmsmsmsEntering a personal passcode with the proper authoritylevel silences a burglary alarm and disarms the systemif it is armed. The system now displays ALARMALARMALARMALARMALARMSILENCEDSILENCEDSILENCEDSILENCEDSILENCED and then the number of points in alarm(A1 ## ALARMSA1 ## ALARMSA1 ## ALARMSA1 ## ALARMSA1 ## ALARMS) and the custom text of all the pointsin alarm, in the order of occurrence. EnteringCOMMAND 4 clears the scrolling point text from the

display. The ALARM SILENCED ALARM SILENCED ALARM SILENCED ALARM SILENCED ALARM SILENCED message continuesto scroll as a reminder that it is still possible to viewthe text of the points in alarm by using the View Memoryfunction.

See VIEW MEMORY?VIEW MEMORY?VIEW MEMORY?VIEW MEMORY?VIEW MEMORY? (COMMAND 4 0) for moreinformation. To clear the event memory and removethe ALARM SILENCED ALARM SILENCED ALARM SILENCED ALARM SILENCED ALARM SILENCED message from the display, entera valid passcode and press the ESCESCESCESCESC key, or re-arm thearea.

19

Note:Note:Note:Note:Note: Some fire points, when tripped, display FIREFIREFIREFIREFIRETROUBLETROUBLETROUBLETROUBLETROUBLE for a preset amount of time. If noother fire activity is detected, this conditionautomatically clears. If the condition remainsor another fire detector is tripped, a fire alarmoccurs.

Viewing Fire TroublesViewing Fire TroublesViewing Fire TroublesViewing Fire TroublesViewing Fire TroublesAfter a passcode is entered, the text of the fire point introuble continues to scroll through the display. PressNEXTNEXTNEXTNEXTNEXT to scroll displays manually. Events scroll fromoldest to newest.

NNNNNon-Fon-Fon-Fon-Fon-Fiririririre Te Te Te Te Trrrrrouble Evouble Evouble Evouble Evouble EventententententsssssWhen a trouble event such as an AC failure occurs, thecommand center can be programmed to emit threewarble tones, then a pause (repeatedly).

FFFFFiririririre Te Te Te Te Trrrrrouble Evouble Evouble Evouble Evouble EventententententsssssWhen a fire trouble occurs, the command center emitsthree warble tones, then a pause (repeatedly).

The system displays the number of fire points withtroubles (A1 ## FIRE TRBLEA1 ## FIRE TRBLEA1 ## FIRE TRBLEA1 ## FIRE TRBLEA1 ## FIRE TRBLE) and then custom textfor each point.

Silencing Fire TroublesSilencing Fire TroublesSilencing Fire TroublesSilencing Fire TroublesSilencing Fire TroublesEntering a personal passcode with the proper authoritylevel silences a fire trouble and disarms the panel if itis armed. To clear the scrolling trouble message fromthe display, enter COMMAND 4COMMAND 4COMMAND 4COMMAND 4COMMAND 4. To review the clearedtroubles, enter COMMAND 4 0COMMAND 4 0COMMAND 4 0COMMAND 4 0COMMAND 4 0.

Special Fire Trouble DisplaySpecial Fire Trouble DisplaySpecial Fire Trouble DisplaySpecial Fire Trouble DisplaySpecial Fire Trouble DisplayIf you silence the command center or clear a troublefor a Fire Point from the display and the fire pointremains in trouble, FIRE TROUBLE FIRE TROUBLE FIRE TROUBLE FIRE TROUBLE FIRE TROUBLE appears in thekeypad’s display. FIRE TROUBLE FIRE TROUBLE FIRE TROUBLE FIRE TROUBLE FIRE TROUBLE remains in the

display until the condition causing the trouble iscleared.

TTTTTrrrrrouble Evouble Evouble Evouble Evouble Eventententententsssss

20

If the system is armed, the display shows the numberof non-fire trouble (A1 ## TROUBLES A1 ## TROUBLES A1 ## TROUBLES A1 ## TROUBLES A1 ## TROUBLES ) and thencustom text for each activated point.

Silencing Non-Fire Trouble EventsSilencing Non-Fire Trouble EventsSilencing Non-Fire Trouble EventsSilencing Non-Fire Trouble EventsSilencing Non-Fire Trouble EventsEntering a personal passcode with the proper authoritylevel silences a trouble and disarms the panel if it isarmed. If you wish to clear the scrolling troublemessage from the display, enter COMMAND 4. If youwish to review these cleared troubles, use COMMAND40.

Viewing Non-Fire Trouble EventsViewing Non-Fire Trouble EventsViewing Non-Fire Trouble EventsViewing Non-Fire Trouble EventsViewing Non-Fire Trouble EventsAfter a passcode is entered, the text of the activatedpoints continues to scroll through the display. PressNEXTNEXTNEXTNEXTNEXT to scroll displays manually. Events scroll fromoldest to newest. Use COMMAND 4 to clear messagesfrom the display.

Special SySpecial SySpecial SySpecial SySpecial Syssssstttttem Tem Tem Tem Tem Trrrrrouble Displaouble Displaouble Displaouble Displaouble DisplayyyyySERVC AC FAIL SERVC AC FAIL SERVC AC FAIL SERVC AC FAIL SERVC AC FAIL and SERVC BATT LOW SERVC BATT LOW SERVC BATT LOW SERVC BATT LOW SERVC BATT LOW are examplesof system trouble displays. These displays appear onall keypads in the system. All system trouble displays

begin with SERVCSERVCSERVCSERVCSERVC. See Standard Displays for adescription of each system trouble display. Enteringyour passcode or a COMMAND 4 silences a systemtrouble tone, but the SERVC display does not clear untilthe faulted condition is corrected.

Cleared Events Are Not LostCleared Events Are Not LostCleared Events Are Not LostCleared Events Are Not LostCleared Events Are Not LostIf you clear the alarms and troubles from the display,you can still view all the events that occurred sincethelast time the system was armed by using COMMAND40 (View Event Memory).

Entry Delay Tone and DisplayEntry Delay Tone and DisplayEntry Delay Tone and DisplayEntry Delay Tone and DisplayEntry Delay Tone and DisplayWhen you enter an armed system through a pointprogrammed for entry delay, the command center emitsa repeating tweedle tone and displays DISARM NOWDISARM NOWDISARM NOWDISARM NOWDISARM NOWas a reminder to turn off the security system.

Failure to turn off the security system before the entrydelay time expires may sound the burglary tone andcould result in an alarm report being sent to thesecurity company.

21

Exit Delay Tone and DisplayExit Delay Tone and DisplayExit Delay Tone and DisplayExit Delay Tone and DisplayExit Delay Tone and DisplayAfter the system is armed, the command center emitsa repeating beep tone, displays EXIT NOWEXIT NOWEXIT NOWEXIT NOWEXIT NOW, and countsdown the exit delay time.

Keystroke Checking TonesKeystroke Checking TonesKeystroke Checking TonesKeystroke Checking TonesKeystroke Checking TonesKeystroke Checking TonesKeystroke Checking TonesKeystroke Checking TonesKeystroke Checking TonesKeystroke Checking TonesValid EntryValid EntryValid EntryValid EntryValid EntryThe command center sounds a muted beep tone whenan appropriate key for the function or entry desired ispressed, indicating the keystroke was accepted.

Invalid EntryInvalid EntryInvalid EntryInvalid EntryInvalid EntryA flat buzz tone sounds when you press a key thatdoesn’t have a function to execute or when the keypadhas no information to display.

Silencing an AlarmSilencing an AlarmSilencing an AlarmSilencing an AlarmSilencing an AlarmThe audible alarm sounds for a specific period of timebefore it automatically shuts off. To silence the sirenbefore the time expires, simply enter your personalpasscode and press ENTENTENTENTENT.

To SILENCE an alarm:To SILENCE an alarm:To SILENCE an alarm:To SILENCE an alarm:To SILENCE an alarm:• Enter your passcode and press ENTENTENTENTENT.

HoHoHoHoHow tw tw tw tw the Syhe Syhe Syhe Syhe Syssssstttttem Rem Rem Rem Rem Reporeporeporeporeporttttts Alars Alars Alars Alars AlarmsmsmsmsmsThe security system can be programmed toautomatically disconnect the telephones when sendingreports to the security company. Once the report iscompleted, the security system returns the telephonesto normal operation (check with your securitycompany).

The system makes repeated attempts to send reportsto the security company. In the event the securitysystem fails to communicate, the command centerbuzzes and the keypad displays SERVC COMM FAILSERVC COMM FAILSERVC COMM FAILSERVC COMM FAILSERVC COMM FAIL.Notify your security company of the communicationsfailure.

Note:Note:Note:Note:Note: If the telephone service is interrupted, thesecurity system cannot send reports to thesecurity company unless an alternate meansof transmitting the reports exists.

23

SySySySySyssssstttttem Commands and Fem Commands and Fem Commands and Fem Commands and Fem Commands and FunctionsunctionsunctionsunctionsunctionsCOMMAND DISABLED appears in the display for a few moments before the display returns to idle text. If thefunction is available in the system but your passcode is not authorized to perform the function, then NOTAUTHORIZED displays on the Command Center.

Press the COMMAND COMMAND COMMAND COMMAND COMMAND bar and then the one or two digits shown in the table below to perform the function.

CommandCommandCommandCommandCommand FunctionFunctionFunctionFunctionFunctionCMD 1 Master ArmCMD 1 1 Master Arm InstantCMD 2 Perimeter InstantCMD 3 Perimeter DelayCMD 4 Silence the Trouble Sounder &

Clear Trouble DisplaysCMD 4 0 View MemoryCMD 4 4 Walk TestCMD 4 7 Reset SensorsCMD 6 Watch ModeCMD 7 Special AlertCMD 8 Perimeter PartialCMD 9 Special Alert

25

6Arming/DisarmingArming/DisarmingArming/DisarmingArming/DisarmingArming/Disarming

TTTTTurururururning tning tning tning tning the Syhe Syhe Syhe Syhe Syssssstttttem On em On em On em On em On (Ar(Ar(Ar(Ar(Arming)ming)ming)ming)ming)The security system can be turned on (armed) in manydifferent ways, depending on the arming commandused. The basic arming command arms the entiresystem. The simplest way to arm the entire system isto enter your passcode or COMMAND 1.

There are several other arming commands to turn thesystem on. These are described later in this guide.

To Arm the Security System:To Arm the Security System:To Arm the Security System:To Arm the Security System:To Arm the Security System:1. Enter your passcode and press ENTENTENTENTENT.2. The command center briefly displays ARMINGARMINGARMINGARMINGARMING,

and the exit delay tone begins. After exit delaytime expires, the display changes to idle armedtext.

TTTTTurururururning tning tning tning tning the Syhe Syhe Syhe Syhe Syssssstttttem Ofem Ofem Ofem Ofem Offffff(Disarming)(Disarming)(Disarming)(Disarming)(Disarming)The security system is turned off by entering yourpersonal passcode. When the system is turned on, youmust enter through a designated entry door to preventan instant alarm condition. Opening the door startsentry delay time and the Command Center emits apulsing “beep” tone to remind you to turn the systemoff. Enter your passcode before the delay time expiresand the system turns off.

If you enter through the wrong door or fail to disarmbefore the entry delay time expires, you cause an alarm.If this happens, silence the alarm (by entering yourpersonal passcode and pressing ENTENTENTENTENT) and call yoursecurity company to notify them that it is not anemergency situation.

26

To Turn the Security System OffTo Turn the Security System OffTo Turn the Security System OffTo Turn the Security System OffTo Turn the Security System Off(Disarm):(Disarm):(Disarm):(Disarm):(Disarm):

1. Enter your personal passcode and press ENTENTENTENTENT.

2. You must press the ENT ENT ENT ENT ENT key within 8 secondsof entering your passcode, or the passcode entryis invalid. The display returns to idle disarmedtext.

TTTTTurururururning tning tning tning tning the Syhe Syhe Syhe Syhe Syssssstttttem On (Arem On (Arem On (Arem On (Arem On (Arming)ming)ming)ming)ming)With a Duress PasscodeWith a Duress PasscodeWith a Duress PasscodeWith a Duress PasscodeWith a Duress PasscodeYour passcode may have a special duress feature thatis simply your personal passcode with its last digitincreased by 1 or 2.

If an intruder demands that you arm or disarm thesecurity system, you can use your duress passcode.The duress passcode arms or disarms the system andandandandandsends an alarm report to the security company. Thereis no alarm tone or visual indication at the premisesthat the report is sent. Check with your securitycompany before attempting to use this feature.

TTTTTurururururning tning tning tning tning the Syhe Syhe Syhe Syhe Syssssstttttem On (Arem On (Arem On (Arem On (Arem On (Arming)ming)ming)ming)ming)With Doors or Windows OpenWith Doors or Windows OpenWith Doors or Windows OpenWith Doors or Windows OpenWith Doors or Windows OpenIf a protected door or window is open, you may havethe option of “force arming” with that point faulted.Faulted points (opened doors or windows) that areforce armed are not included in the system. Theremaining points arm normally.

Force armed points either return to normal operationafter you turn off your system or return to normal whenthe door or window is closed. The system may notoffer force arming or it may be restricted to specificpoints. Contact your security company for moreinformation.

1. Use your passcode or an arming function to startthe arming process.

2. The display shows CHK AREA XCHK AREA XCHK AREA XCHK AREA XCHK AREA X.3. Press NEXT NEXT NEXT NEXT NEXT repeatedly to scroll through the

point text for each faulted point. FORCE ARMFORCE ARMFORCE ARMFORCE ARMFORCE ARMdisplays after the text for the last faulted point.Press the COMMANDCOMMANDCOMMANDCOMMANDCOMMAND bar to display FORCEFORCEFORCEFORCEFORCEARM ARM ARM ARM ARM before reaching the text for the last point.

27

1NOT AUTHORIZEDNOT AUTHORIZEDNOT AUTHORIZEDNOT AUTHORIZEDNOT AUTHORIZED

The passcode entered does not have theauthority to force arm.

5. Press ENTENTENTENTENT with FORCE ARM FORCE ARM FORCE ARM FORCE ARM FORCE ARM displayed to armthe system with the faulted points removed fromservice.

4. One of the messages below may display in placeof FORCE ARMFORCE ARMFORCE ARMFORCE ARMFORCE ARM.

NOT BYPASSABLENOT BYPASSABLENOT BYPASSABLENOT BYPASSABLENOT BYPASSABLEIndicates the system is programmed not to armwith particular points faulted (doors or windowsopen).

TOO MANY BYPASSDTOO MANY BYPASSDTOO MANY BYPASSDTOO MANY BYPASSDTOO MANY BYPASSDIndicates that the system’s number of allowablebypassed points is reached. The system’smaximum number of bypassed and/or forcearmed points is set by your security company.Verify what number this is.

TOO MANY FAULTEDTOO MANY FAULTEDTOO MANY FAULTEDTOO MANY FAULTEDTOO MANY FAULTEDIndicates that more than the number of allowablepoints are faulted. Bypassed points are countedas faulted. The system’s maximum number ofbypassed and/or force armed points is set byyour security company. Verify what number thisis.

29

11MASMASMASMASMASTER ARM ?TER ARM ?TER ARM ?TER ARM ?TER ARM ?COMMAND 1COMMAND 1COMMAND 1COMMAND 1COMMAND 1

TTTTTurururururn tn tn tn tn the Entirhe Entirhe Entirhe Entirhe Entire Sye Sye Sye Sye Syssssstttttem On Wem On Wem On Wem On Wem On WititititithhhhhDelaysDelaysDelaysDelaysDelays

DescriptionDescriptionDescriptionDescriptionDescriptionUse this function to turn on the entire system, bothperimeter and interior. When you turn the system on,the display shows how many seconds of exit delay timeremain to exit the protected area. Leave before the exitdelay time expires.

Leaving after exit delay expires causes entry delay tostart. It may also cause an alarm on an interior device.Enter your personal passcode to disarm the system.

This function can be used by cleaning or servicepersonnel, or others to turn on the system when theyleave.

Using Master Arm:Using Master Arm:Using Master Arm:Using Master Arm:Using Master Arm:1. The display shows disarmed idle text.2. Press the COMMANDCOMMANDCOMMANDCOMMANDCOMMAND bar. The display shows

SYSTEM COMMANDSYSTEM COMMANDSYSTEM COMMANDSYSTEM COMMANDSYSTEM COMMAND.3. Press the 1 1 1 1 1 key.

Note:Note:Note:Note:Note: If you prefer, you may use the Command Menuin place of steps 2 and 3 to initiate thisfunction. Press the MENU MENU MENU MENU MENU key to enter theCommand Menu, then press NEXT NEXT NEXT NEXT NEXT repeatedlyuntil you reach the MASTER ARM ?MASTER ARM ?MASTER ARM ?MASTER ARM ?MASTER ARM ? prompt.Press ENTENTENTENTENT. MASTER ARM ALL ? MASTER ARM ALL ? MASTER ARM ALL ? MASTER ARM ALL ? MASTER ARM ALL ? displays.Press ENTENTENTENTENT.

4. The display shows ARMING ARMING ARMING ARMING ARMING for two seconds,then displays EXIT NOW #EXIT NOW #EXIT NOW #EXIT NOW #EXIT NOW # (# = exit delay timeremaining). After the exit delay time expires, thedisplay changes to idle armed text.

5. To disarm the security system, enter yourpersonal passcode and press ENTENTENTENTENT.

31

Using Master Arm Inst:Using Master Arm Inst:Using Master Arm Inst:Using Master Arm Inst:Using Master Arm Inst:1. The display shows idle disarmed text.2. Press the COMMANDCOMMANDCOMMANDCOMMANDCOMMAND bar. The display shows

SYSTEM COMMANDSYSTEM COMMANDSYSTEM COMMANDSYSTEM COMMANDSYSTEM COMMAND.3. Press the 1 1 1 1 1 key. Now press the 11111 key again.

Note:Note:Note:Note:Note: If you prefer, you may use the Command Menuin place of steps 2 and 3 to initiate thisfunction. Press the MENU MENU MENU MENU MENU key to enter theCommand Menu, then press NEXT NEXT NEXT NEXT NEXT repeatedlyuntil you reach the MASTER ARM INST ?MASTER ARM INST ?MASTER ARM INST ?MASTER ARM INST ?MASTER ARM INST ?prompt. Press ENTENTENTENTENT.

4. The display shows ALL SECURE.ALL SECURE.ALL SECURE.ALL SECURE.ALL SECURE.5. To disarm the security system, enter your

personal passcode and press ENTENTENTENTENT.

MASMASMASMASMASTER ARM INSTER ARM INSTER ARM INSTER ARM INSTER ARM INST?T?T?T?T?COMMAND 1 1COMMAND 1 1COMMAND 1 1COMMAND 1 1COMMAND 1 1

TTTTTurururururn tn tn tn tn the Entirhe Entirhe Entirhe Entirhe Entire Sye Sye Sye Sye Syssssstttttem Onem Onem Onem Onem OnWithout DelaysWithout DelaysWithout DelaysWithout DelaysWithout Delays

DescriptionDescriptionDescriptionDescriptionDescriptionUse this function to turn on the entire system, bothperimeter and interior without delays. When enteringCOMMAND 11, remember that the second 1 must bepressed within 2 seconds after pressing the first 1.

33

PERIMETR INSPERIMETR INSPERIMETR INSPERIMETR INSPERIMETR INST ?T ?T ?T ?T ?COMMAND 2COMMAND 2COMMAND 2COMMAND 2COMMAND 2

TTTTTurururururn On tn On tn On tn On tn On the Phe Phe Phe Phe Perererererimeimeimeimeimettttter Wer Wer Wer Wer Wititititith Nh Nh Nh Nh NoooooDelaysDelaysDelaysDelaysDelays

DescriptionDescriptionDescriptionDescriptionDescriptionUse this function to turn on only the perimeter of thebuilding, leaving the interior of the building disarmed.This function allows no exit or entry delay time throughthe perimeter, including the designated exit delay door.

This function is useful in residential systems, providingthe security of an armed perimeter while allowingresidents to move freely throughout the interior of thepremises.

It is also useful in commercial systems when workingbefore or after business hours to arm the perimeter.Remember, there are no entry or exit delays whenCOMMAND 2COMMAND 2COMMAND 2COMMAND 2COMMAND 2 is used. The system must be disarmed(turned off) to enter or exit the premises.

Using Perimetr Inst:Using Perimetr Inst:Using Perimetr Inst:Using Perimetr Inst:Using Perimetr Inst:1. Interior points are not armed with this command

and may remain faulted while arming withCOMMAND 2.

2. Press the COMMANDCOMMANDCOMMANDCOMMANDCOMMAND bar. The display showsSYSTEM COMMANDSYSTEM COMMANDSYSTEM COMMANDSYSTEM COMMANDSYSTEM COMMAND.

3. Press the 2 2 2 2 2 key.

Note:Note:Note:Note:Note: If you prefer, you may use the Command Menuin place of steps 2 and 3 to initiate thisfunction. Press the MENU MENU MENU MENU MENU key to enter theCommand Menu, then press NEXT NEXT NEXT NEXT NEXT repeatedlyuntil you reach the PERIMETR INST ?PERIMETR INST ?PERIMETR INST ?PERIMETR INST ?PERIMETR INST ? prompt.Press ENTENTENTENTENT.

4. The display shows PERIMETR INSTANTPERIMETR INSTANTPERIMETR INSTANTPERIMETR INSTANTPERIMETR INSTANT. Afterarming the perimeter without delays, you cannotenter or exit the premises without disarming thesystem. Opening a perimeter door beforedisarming generates an alarm. If this happens,silence the alarm by turning the system off and

34

call the security company to notify them that itis not an emergency situation.


PERIMETR INSPERIMETR INSPERIMETR INSPERIMETR INSPERIMETR INST ? continueT ? continueT ? continueT ? continueT ? continueddddd

35

Using Perimetr DelayUsing Perimetr DelayUsing Perimetr DelayUsing Perimetr DelayUsing Perimetr Delay:1. Interior points are not armed with this command

and may remain faulted while arming withCOMMAND 3.



Note:Note:Note:Note:Note: The Command Menu may be used in place ofsteps 2 and 3 to initiate this function. Pressthe MENU MENU MENU MENU MENU key to enter the Command Menu,then press NEXT NEXT NEXT NEXT NEXT repeatedly until thePERIMETR DELAY ?PERIMETR DELAY ?PERIMETR DELAY ?PERIMETR DELAY ?PERIMETR DELAY ? prompt is reached. PressENTENTENTENTENT.

4. The display shows EXIT NOW # EXIT NOW # EXIT NOW # EXIT NOW # EXIT NOW # (# = exit delaytime remaining). After the exit delay expires,PERIMETR DELAYEDPERIMETR DELAYEDPERIMETR DELAYEDPERIMETR DELAYEDPERIMETR DELAYED is displayed.


PERIMETR DELPERIMETR DELPERIMETR DELPERIMETR DELPERIMETR DELAAAAAY ?Y ?Y ?Y ?Y ?COMMAND 3COMMAND 3COMMAND 3COMMAND 3COMMAND 3

TTTTTurururururn On tn On tn On tn On tn On the Phe Phe Phe Phe Perererererimeimeimeimeimettttter Wer Wer Wer Wer WititititithhhhhDelaysDelaysDelaysDelaysDelays

DescriptionDescriptionDescriptionDescriptionDescriptionIn residential systems, this function allows you to armonly the perimeter and exit through a door programmedfor exit delay. The interior of the building remainsdisarmed. People or pets are free to move throughoutthe interior of the premises.

This function is also useful in commercial systemswhen working before or after business hours to armthe perimeter. Other system users can enter throughdoors programmed for entry delay, which starts theentry delay sounder and countdown.

37

COMMAND 4COMMAND 4COMMAND 4COMMAND 4COMMAND 4

DescriptionDescriptionDescriptionDescriptionDescriptionUse COMMAND 4 to silence the trouble sounder duringsystem events. This command also clears systemmessages from the display. The ALARM SILENCEDALARM SILENCEDALARM SILENCEDALARM SILENCEDALARM SILENCEDdisplay may continue to scroll to remind you thatcleared events can be seen with the View Memoryfunction (see View Memory ? COMMAND 40).

Using COMMAND 4Using COMMAND 4Using COMMAND 4Using COMMAND 4Using COMMAND 4:1. Press the COMMAND COMMAND COMMAND COMMAND COMMAND bar. The display shows

SYSTEM COMMANDSYSTEM COMMANDSYSTEM COMMANDSYSTEM COMMANDSYSTEM COMMAND.

2. Press the 4 4 4 4 4 key. The Command Center sounderis silenced.

Silence tSilence tSilence tSilence tSilence the The The The The Trrrrrouble Sounder & Cleouble Sounder & Cleouble Sounder & Cleouble Sounder & Cleouble Sounder & Clear Tar Tar Tar Tar Trrrrrouble Displaouble Displaouble Displaouble Displaouble Displayyyyy

39

VIEW MEMORVIEW MEMORVIEW MEMORVIEW MEMORVIEW MEMORY ?Y ?Y ?Y ?Y ?COMMAND 4 0COMMAND 4 0COMMAND 4 0COMMAND 4 0COMMAND 4 0

VVVVVieieieieiew Evw Evw Evw Evw Event Memorent Memorent Memorent Memorent Memoryyyyy

DescriptionDescriptionDescriptionDescriptionDescriptionYour system stores events that occurred since the lasttime memory was cleared. Use COMMAND 40 to viewEvent Memory.

Event Memory allows you or a service technician toreview events after they are cleared from the keypad’sdisplay. ALARM SILENCEDALARM SILENCEDALARM SILENCEDALARM SILENCEDALARM SILENCED may scroll to remind youthat events are stored in Event Memory.

Each time you turn the system on, the Event Memoryis erased and the ALARM SILENCED ALARM SILENCED ALARM SILENCED ALARM SILENCED ALARM SILENCED message iscleared.

Using VUsing VUsing VUsing VUsing Vieieieieiew Memorw Memorw Memorw Memorw Memoryyyyy:1. Ensure the display shows idle disarmed text.

2. Press the COMMAND COMMAND COMMAND COMMAND COMMAND bar. The display showsSYSTEM COMMANDSYSTEM COMMANDSYSTEM COMMANDSYSTEM COMMANDSYSTEM COMMAND.

3. Press the 4 4 4 4 4 key, followed by the 00000 key.

Note:Note:Note:Note:Note: If you prefer, you may use the Command Menuin place of steps 2 and 3 to initiate thisfunction. Press the MENU MENU MENU MENU MENU key to enter theCommand Menu, then press NEXT NEXT NEXT NEXT NEXT repeatedlyuntil you reach the VIEW MEMORY ?VIEW MEMORY ?VIEW MEMORY ?VIEW MEMORY ?VIEW MEMORY ? prompt.Press ENTENTENTENTENT.

4. The system displays event summary lines and pointtext in this order: fire alarm summary line, pointtext for each fire alarm event; alarm summary line,point text for each alarm event; fire troublesummary line, point text for each fire trouble event;trouble summary line, and point text for eachtrouble event. Press NEXTNEXTNEXTNEXTNEXT to scroll through theevents. If there are no events to view, NONONONONOEVENTSEVENTSEVENTSEVENTSEVENTS displays.

5. Return to idle text at any time by pressing ESCESCESCESCESC.

41

WWWWWALK TESALK TESALK TESALK TESALK TEST ?T ?T ?T ?T ?COMMAND 4 4COMMAND 4 4COMMAND 4 4COMMAND 4 4COMMAND 4 4

WWWWWalk Talk Talk Talk Talk TeeeeessssstttttDescriptionDescriptionDescriptionDescriptionDescription

Use this function to test command centers, detectiondevices, and sounders (both interior and exterior) tobe certain they function properly. You can reviewuntested points at the command center to help pin-point any problems.

You cannot arm the system while in the walk test mode,and no alarm reports are sent to the security companyunless a 24-hour point is activated (such as fire orpanic).

Beginning the walk test activates the burglary bell andsounds the burglary bell at the command center for 2seconds. The AC is disabled for 4 minutes in order totest the system’s battery power. If the battery cannotmaintain the system for the 4 minute period, thecommand center becomes unresponsive. If this

happens, contact your security company. At the end ofthe 4 minute period, AC is returned to the system andthe panel restores. To test individual detection devices,simply activate sensors and open protected doors andwindows one-at-a-time. As each detection device isfaulted, the Command Center emits a brief tone andthe display indicates for 60 seconds that the point hasbeen tested. This verifies that each detection device isworking properly.

Using WUsing WUsing WUsing WUsing Walk Talk Talk Talk Talk Teeeeesssssttttt:1. Ensure the display shows idle disarmed text.2. Press the COMMAND COMMAND COMMAND COMMAND COMMAND bar. The display shows

SYSTEM COMMANDSYSTEM COMMANDSYSTEM COMMANDSYSTEM COMMANDSYSTEM COMMAND.3. Press the 4 4 4 4 4 key, followed by the 44444 key.

Note:Note:Note:Note:Note: The Command Menu may be used in place ofsteps 2 and 3 to initiate this function. Pressthe MENU MENU MENU MENU MENU key to enter the Command Menu,then press NEXT NEXT NEXT NEXT NEXT repeatedly until the WALKWALKWALKWALKWALKTEST ?TEST ?TEST ?TEST ?TEST ? prompt is reached. Press ENTENTENTENTENT.

42

WALK TEST ?WALK TEST ?WALK TEST ?WALK TEST ?WALK TEST ? continuedcontinuedcontinuedcontinuedcontinued

4. The burglary bell sounds for 2 seconds. Whenthe display panel shows ## PTS TO TEST## PTS TO TEST## PTS TO TEST## PTS TO TEST## PTS TO TEST youcan begin. Test each point by first opening andthen closing the door or window. Check thedisplay after testing each point. For interiorpoints, walking past the device once issufficient. If any point does not test correctly,contact the security company for service.

5. During the Walk Test you may want to see thepoints that remain untested. When point text isdisplayed, press ESCESCESCESCESC. The display shows ## PTS## PTS## PTS## PTS## PTSTO TESTTO TESTTO TESTTO TESTTO TEST. Press the ESCESCESCESCESC key. VIEW UNTESTED VIEW UNTESTED VIEW UNTESTED VIEW UNTESTED VIEW UNTESTED????? is displayed. Press ENTENTENTENTENT. The display shows## PTS UNTESTED## PTS UNTESTED## PTS UNTESTED## PTS UNTESTED## PTS UNTESTED. Press NEXTNEXTNEXTNEXTNEXT to see a listof the points that are untested. Move throughthis list by pressing the NEXTNEXTNEXTNEXTNEXT key. To resumethe Walk Test, press ESCESCESCESCESC. # PTS UNTESTED # PTS UNTESTED # PTS UNTESTED # PTS UNTESTED # PTS UNTESTEDis displayed. Press ESCESCESCESCESC. ## PTS TO TEST ## PTS TO TEST ## PTS TO TEST ## PTS TO TEST ## PTS TO TEST isdisplayed. Resume testing points. To end theWalk Test, press ESCESCESCESCESC twice.

6. When all points are tested, 0 PTS TO TEST 0 PTS TO TEST 0 PTS TO TEST 0 PTS TO TEST 0 PTS TO TEST isdisplayed. Press ESCESCESCESCESC. The display momentarilyshows ALL PTS TESTEDALL PTS TESTEDALL PTS TESTEDALL PTS TESTEDALL PTS TESTED before returning toidle text.

43

3. Press the 4 4 4 4 4 key followed by the 77777 key.

Note:Note:Note:Note:Note: If you prefer, you may use the Command Menuin place of steps 2 and 3 to initiate thisfunction. Press the MENU MENU MENU MENU MENU key to enter theCommand Menu, then press NEXT NEXT NEXT NEXT NEXT repeatedlyuntil you reach the RESET SENSORS ?RESET SENSORS ?RESET SENSORS ?RESET SENSORS ?RESET SENSORS ?prompt. Press ENTENTENTENTENT.

4. The display shows SENSORS RESETING SENSORS RESETING SENSORS RESETING SENSORS RESETING SENSORS RESETING forapproximately 3 seconds and then goes blankbefore returning to idle disarmed text.

If you enter this function and the detector or sensorresets momentarily, but then returns to a faultedcondition, the conditions causing the activation maystill be present or the detector may be faulty. Check tobe certain that there is no smoke, fire, or other dangerpresent.

If you can’t reset the detector or sensor contact yoursecurity company.

RESET SENSORS ?RESET SENSORS ?RESET SENSORS ?RESET SENSORS ?RESET SENSORS ?COMMAND 4 7COMMAND 4 7COMMAND 4 7COMMAND 4 7COMMAND 4 7

Reset SensorsReset SensorsReset SensorsReset SensorsReset Sensors

DescriptionDescriptionDescriptionDescriptionDescriptionDetection devices, such as smoke detectors and shocksensors, must be reset after being activated. Thisfunction momentarily removes power from thesesensors to reset them. It also clears point informationfrom the display, leaving the ALARM SILENCEDALARM SILENCEDALARM SILENCEDALARM SILENCEDALARM SILENCEDmessage in the display as a reminder that the ViewMemory function can be used to view the cleared pointinformation. Entering a valid passcode and thenpressing the ESCESCESCESCESC key clears the ALARM SILENCEDALARM SILENCEDALARM SILENCEDALARM SILENCEDALARM SILENCEDmessage and the event memory. Arming the system alsoclears the display and the event memory.

Using Reset SensorsUsing Reset SensorsUsing Reset SensorsUsing Reset SensorsUsing Reset Sensors:1. Ensure that the display is at idle disarmed text.2. Press the COMMANDCOMMANDCOMMANDCOMMANDCOMMAND bar. The display shows


45

WWWWWAAAAATTTTTCCCCCH MODE ?H MODE ?H MODE ?H MODE ?H MODE ?COMMAND 6COMMAND 6COMMAND 6COMMAND 6COMMAND 6

Watch ModeWatch ModeWatch ModeWatch ModeWatch Mode

DescriptionDescriptionDescriptionDescriptionDescriptionWatch mode can be used with the security systemdisarmed to monitor select points. Each time pointsare faulted (door or window is opened), the commandcenter chimes once and displays the point text for 60seconds. No alarms are generated by this mode except24-hour alarms (fire, panic, etc.).

When the command center’s keypad lighting is on, thecommand center does not chime. The keys light for 20seconds whenever you strike a key.

Use this function in residential systems to monitorentries or exits in your home. In commercial systemsit can serve as a door chime to alert you when acustomer or delivery person enters your business.

Note:Note:Note:Note:Note: Contact your security company to find outwhich points are watch points and if thesystem automatically turns the Watch Mode onwhenever you disarm.

Entering Watch Mode:Entering Watch Mode:Entering Watch Mode:Entering Watch Mode:Entering Watch Mode:1. Ensure the display is at disarmed idle text.2. Press the COMMANDCOMMANDCOMMANDCOMMANDCOMMAND bar. The display shows

SYSTEM COMMAND.SYSTEM COMMAND.SYSTEM COMMAND.SYSTEM COMMAND.SYSTEM COMMAND.3. Press the 66666 key.

Note:Note:Note:Note:Note: The Command Menu can be used in place ofsteps 2 and 3 to initiate this function. Pressthe MENU MENU MENU MENU MENU key to enter the Command Menu,then press NEXT NEXT NEXT NEXT NEXT repeatedly until the WATCHWATCHWATCHWATCHWATCHMODE ? MODE ? MODE ? MODE ? MODE ? prompt is reached. Press ENTENTENTENTENT.

4. The display briefly shows WATCH IS NOW ONWATCH IS NOW ONWATCH IS NOW ONWATCH IS NOW ONWATCH IS NOW ONbefore returning to idle disarmed text.

46

Exiting Watch Mode:Exiting Watch Mode:Exiting Watch Mode:Exiting Watch Mode:Exiting Watch Mode:1. Ensure the keypad is at disarmed idle text.2. Press the COMMANDCOMMANDCOMMANDCOMMANDCOMMAND bar. The display shows

SYSTEM COMMAND.SYSTEM COMMAND.SYSTEM COMMAND.SYSTEM COMMAND.SYSTEM COMMAND.3. Press the 66666 key.

Note:Note:Note:Note:Note: The Command Menu may be used in place ofsteps 2 and 3 to initiate this function. Pressthe MENU MENU MENU MENU MENU key to enter the Command Menu,then press NEXT NEXT NEXT NEXT NEXT repeatedly until the WATCHWATCHWATCHWATCHWATCHMODE ?MODE ?MODE ?MODE ?MODE ? prompt is reached. Press ENTENTENTENTENT.

4. The display briefly shows WATCH IS NOW OFFWATCH IS NOW OFFWATCH IS NOW OFFWATCH IS NOW OFFWATCH IS NOW OFFbefore returning to idle disarmed text.

47

PERIMETR PPERIMETR PPERIMETR PPERIMETR PPERIMETR PARARARARART ?T ?T ?T ?T ?COMMAND 8COMMAND 8COMMAND 8COMMAND 8COMMAND 8

PPPPPararararartialltialltialltialltially Ty Ty Ty Ty Turururururn On tn On tn On tn On tn On the Phe Phe Phe Phe Perererererimeimeimeimeimetttttererererer

DescriptionDescriptionDescriptionDescriptionDescriptionThis function is used to turn on the perimeter of thebuilding while selected portions of the perimeterremain turned off. Perimeter points that are not secure(faulted) when this function is entered areautomatically bypassed and are not included in thesystem. This function does not turn on the interior ofthe building. Entry/exit delays are provided with thisarming command.

Use this function in residential systems to turn on thefront of your house while the interior and the rearperimeter doors are left turned off, giving you freedomof movement between the house and patio.

In commercial systems, when you need access to largeoverhead doors to receive deliveries, using this function

allows you to keep the rest of the building perimeterarmed.

Using PUsing PUsing PUsing PUsing Perererererimeimeimeimeimetr Ptr Ptr Ptr Ptr Parararararttttt:1. Ensure that the display shows disarmed idle text.

Before using this function, decide which pointsare to be left turned off. Fault the points (doorsand windows) by leaving them open. The pointsmust remain open until after the exit delay timeexpires.



Note:Note:Note:Note:Note: The Command Menu may be used in place ofsteps 2 and 3 to initiate this function. Pressthe MENU MENU MENU MENU MENU key to enter the Command Menu,then press NEXT NEXT NEXT NEXT NEXT repeatedly until thePERIMETR PART ? PERIMETR PART ? PERIMETR PART ? PERIMETR PART ? PERIMETR PART ? prompt is reached. PressENTENTENTENTENT.

48

PERIMETR PART ?PERIMETR PART ?PERIMETR PART ?PERIMETR PART ?PERIMETR PART ? continuedcontinuedcontinuedcontinuedcontinued4. The display shows EXIT NOWEXIT NOWEXIT NOWEXIT NOWEXIT NOW #####. When exit delay

time expires and the system turns on, the displayshortens to PERIMETR PARTIAL.PERIMETR PARTIAL.PERIMETR PARTIAL.PERIMETR PARTIAL.PERIMETR PARTIAL.

5. When performing a COMMAND 8 and no pointsare faulted or if the points return to normalbefore the exit delay time expires, the system isturned on as in COMMAND 3.

6. To disarm, enter your personal passcode andpress ENTENTENTENTENT.

Special AlerSpecial AlerSpecial AlerSpecial AlerSpecial Alertttttsssss

49

DescriptionDescriptionDescriptionDescriptionDescriptionCommands 7 and 9 can be programmed to respond toseveral situations that may need immediate attention.These commands may also be used to send a silentalarm to the security company without sounding analarm signal on the premises. Check with your securitycompany for available options.

COMMAND 7COMMAND 7COMMAND 7COMMAND 7COMMAND 7 and COMMAND 9and COMMAND 9and COMMAND 9and COMMAND 9and COMMAND 9Special AlerSpecial AlerSpecial AlerSpecial AlerSpecial Alertttttsssss

50



2. Press the 99999 key. The COMMAND 9 special alertis programmed to:

___ notify the alarm company

___ ring a bell on the premises

___ display at the command center

Description:_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________



2. Press the 7 7 7 7 7 key. The COMMAND 7 special alertis programmed to:

___ notify the alarm company

___ ring a bell on the premises

___ display at the command center

Description:_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

51

Not even the most advanced security system canguarantee protection against burglary, fire, orenvironmental threats. All security systems are subjectto possible compromise or failure-to-warn for a varietyof reasons including, but not limited to, the following:

• If sirens or horns are placed outside the hearingrange of people in remote areas of the buildingor in areas that are frequently closed off, theydo not provide the intended protection.

• If intruders gain access through unprotectedpoints of entry, the system does not detect theirentrance.

• If intruders have the technical means ofbypassing, jamming, or disconnecting all or partof the system, they will not be detected.

• If the AC power supply is OFF and the back-upbattery is either missing or dead, sensors do notdetect intrusion.

• Smoke detectors cannot detect smoke inchimneys, walls, or roofs, or smoke blocked by

a closed door. They may not detect smoke orfire on a level of the building different from theone they are located on. Smoke detectors maynot be able to warn in time about fires startedby explosions, improper storage of flammables,overloaded electrical circuits, or other types ofhazardous conditions.

• If phone lines are out of service, reports fromthe security system to the security companycannot be sent. Telephone lines are vulnerableto compromise by several means.

Inadequate maintenance and failure to test are themost common causes of alarm failure. Testing thesystem once a week is strongly recommended to ensureall system components are working properly.

Although having a security system may make youeligible for reduced insurance premiums, the systemis no substitute for insurance. Warning devices cannotcompensate you for loss of life or property.

SecurSecurSecurSecurSecurity Syity Syity Syity Syity Syssssstttttem Lem Lem Lem Lem Limitimitimitimitimitaaaaationstionstionstionstions

53

TV Room

Bedroom

DR K BR

Living RoomBR

Bedroom

Bed-room Bedroom

FFFFFiririririre Safe Safe Safe Safe Safeeeeety and Evty and Evty and Evty and Evty and Evacuaacuaacuaacuaacuationtiontiontiontion

Residential fire is a leading cause of accidental death.Most fire related deaths occur at night when occupantssuffocate in their sleep from smoke and toxic gases,rather than from burns. To help reduce this risk, thefollowing program should be implemented.

1. Minimize fire hazards. Smoking in bed, cleaningwith flammable liquids such as gasoline, leavingchildren home alone, and using unsafe holidaydecorations are some of the common causes ofhousehold fire.

2. Install a fire alarm system. The primary purposeof this system is to protect lives by giving theearliest possible warning of danger.

3. A smoke detector (indicated in the figures by aninverted “s” in a circle) should be provided todetect smoke in each sleeping area in a home.

4. Practice an escape plan. Because there can bevery little time between detection of a fire andthe time it becomes deadly, it is important thatevery member of the family understand how toquickly evacuate according to the plan.

54

Fire Safety and Evacuation Fire Safety and Evacuation Fire Safety and Evacuation Fire Safety and Evacuation Fire Safety and Evacuation continuedcontinuedcontinuedcontinuedcontinuedPlan both primary and alternate escape routes. Sincestairwells and hallways can be blocked during a fire,exiting through a bedroom window must be a part ofthe escape plan. If the sleeping area is above the groundfloor, install a means of safe descent outside thebuilding if one does not already exist.All family members should plan to meet at a locationaway from the house (such as a neighbor’s house) soeveryone can be accounted for.

If it is determined that the alarm was accidentallysounded, the bell should be silenced, the detectorsreset, and the security company notified immediatelythat there is no emergency situation.

Bedroom

Bedroom

BedroomKitchenDiningRoom

LivingRoom Fire

55

NO AUTHORITYNO AUTHORITYNO AUTHORITYNO AUTHORITYNO AUTHORITYThe system does not recognize the passcode entered.

NOT AUTHORIZEDNOT AUTHORIZEDNOT AUTHORIZEDNOT AUTHORIZEDNOT AUTHORIZEDThe passcode entered does not have the authority toForce Arm.

PERIMETR DELAYPERIMETR DELAYPERIMETR DELAYPERIMETR DELAYPERIMETR DELAYIndicates that the perimeter is armed (turned on)with entry/exit delay time. (See Turning the SystemOn With Delays.....)

PERIMETR INSTANTPERIMETR INSTANTPERIMETR INSTANTPERIMETR INSTANTPERIMETR INSTANTIndicates that the perimeter is armed (turned on)without entry/exit delay time. (See Turning theSystem On Without Delays.)

FIRST DISARMFIRST DISARMFIRST DISARMFIRST DISARMFIRST DISARMIndicates that the function requested can only beperformed when the area is disarmed. Disarm the areato perform the function.

Standard DisplaysStandard DisplaysStandard DisplaysStandard DisplaysStandard Displays

The command center uses standard and customdisplays to show the status of the security system.Many standard displays are described here. The systemmay not use all of them. Descriptions of custom textfollow.

SYSTEM COMMANDSYSTEM COMMANDSYSTEM COMMANDSYSTEM COMMANDSYSTEM COMMANDDisplays when you press the COMMAND COMMAND COMMAND COMMAND COMMAND bar. Thesystem is waiting for you to enter a one or two digitnumber to complete the command.

DISARM NOWDISARM NOWDISARM NOWDISARM NOWDISARM NOWWhen the system is turned on, entering through a delaydoor starts entry delay time. The command center emitsa tweedle tone and displays DISARM NOWDISARM NOWDISARM NOWDISARM NOWDISARM NOW.You must turn off the system before entry delay timeexpires to avoid creating an alarm event.

EXIT NOWEXIT NOWEXIT NOWEXIT NOWEXIT NOWArming the system starts exit delay time. The commandcenter emits a repeating beep tone and displays EXITEXITEXITEXITEXITNOWNOWNOWNOWNOW.

57

SySySySySyssssstttttem Tem Tem Tem Tem Trrrrrouble Displaouble Displaouble Displaouble Displaouble DisplayyyyysssssIf you see any of the system trouble displays shownbelow, contact your security company to determinewhether repairs are needed.

CALL FOR SERVICECALL FOR SERVICECALL FOR SERVICECALL FOR SERVICECALL FOR SERVICECall your security company. The security system mayhave failed.

SERVC PANELSERVC PANELSERVC PANELSERVC PANELSERVC PANELIndicates a problem with the panel. The panel is notoperating. Call your security company for service.

SERVC PARAMSERVC PARAMSERVC PARAMSERVC PARAMSERVC PARAMIndicates a problem with the panel. The panel may notbe operating properly. Call your security company forservice.

SERVC AC FAILSERVC AC FAILSERVC AC FAILSERVC AC FAILSERVC AC FAILIndicates that AC power to the security system isinterrupted. Check the plug-in transformer and circuitbreaker. Entering COMMAND 4 silences the troublebuzz. The display clears when AC power returns.

SERVC BATT LOWSERVC BATT LOWSERVC BATT LOWSERVC BATT LOWSERVC BATT LOWIndicates the security system’s battery is low, ortemporarily draining faster than the system can chargeit. If this display remains or appears frequently, callyour security company for service.

SERVC BATT MSINGSERVC BATT MSINGSERVC BATT MSINGSERVC BATT MSINGSERVC BATT MSINGIndicates the security system’s battery is disconnectedor shorted.

SERVC COMM FAILSERVC COMM FAILSERVC COMM FAILSERVC COMM FAILSERVC COMM FAILThe security system makes repeated attempts tocommunicate with the security company. In the eventthe security system fails to communicate, thecommand center buzzes and displays SERVC COMMSERVC COMMSERVC COMMSERVC COMMSERVC COMMFAILFAILFAILFAILFAIL. Notify your security company of thecommunication trouble.

SERVC KEYPADSERVC KEYPADSERVC KEYPADSERVC KEYPADSERVC KEYPADIndicates that a keypad, other than the one displayingthe message, is in a trouble condition. Notify yoursecurity company.

58

SERVC PH LINE #1 (SERVC PH LINE #1 (SERVC PH LINE #1 (SERVC PH LINE #1 (SERVC PH LINE #1 (ororororor 2) 2) 2) 2) 2)Indicates telephone line trouble. Call the phonecompany from another phone to report telephonetrouble. This message may not appear in some systems.

SERVC PRINTERSERVC PRINTERSERVC PRINTERSERVC PRINTERSERVC PRINTERIndicates that a local printer is in a trouble condition.Check to be sure the printer is powered on, the paperis correctly is inserted, and the printer is selected.Contact your security company if you have questionsor the display doesn’t clear.

SERVC PT BUS #SERVC PT BUS #SERVC PT BUS #SERVC PT BUS #SERVC PT BUS #Displays when a problem occurrs with one of thepanel’s circuits. Call your security company.

ALARM SILENCEDALARM SILENCEDALARM SILENCEDALARM SILENCEDALARM SILENCEDThis message is added to the scrolling alarm displaywhen alarm sounders are silenced. Enter a validpasscode and press ESCESCESCESCESC, or arm the system to clearthis message.FIRE BYPASSFIRE BYPASSFIRE BYPASSFIRE BYPASSFIRE BYPASS

This display indicates that fire points are bypassed.

24 HOUR BYPASS24 HOUR BYPASS24 HOUR BYPASS24 HOUR BYPASS24 HOUR BYPASSThis display indicates that 24-hour points arebypassed.

59

SecurSecurSecurSecurSecurity Syity Syity Syity Syity Syssssstttttem Glosem Glosem Glosem Glosem Glossarsarsarsarsaryyyyy

AreaAreaAreaAreaArea - A group of detection devices connected tothe security system.

Arm Arm Arm Arm Arm - To turn the controlled points (burglardetection devices) on. When an area is armedand a controlled point trips, an alarm occurs orentry delay begins. When an area is disarmed,faulting controlled points does not generatealarms.

Authority LevelAuthority LevelAuthority LevelAuthority LevelAuthority Level - The security company or securityrepresentative assigns an authority level to yourpasscode. The authority level determines whatcommand center functions you can execute.

BypassBypassBypassBypassBypass - Selectively remove points from the securitysystem. A point may be bypassed in order to armthe perimeter with a window open.

Central StationCentral StationCentral StationCentral StationCentral Station - A facility where trained personnelmonitor security systems 24 hours a day.Security systems can be programmed to contactthe central station during alarm conditions,enabling central station personnel to dispatchthe proper authorities.

Closing ReportClosing ReportClosing ReportClosing ReportClosing Report - A report the system can beprogrammed to send to the central stationindicating that an area is armed. Opening andclosing reports are commonly used bycommercial accounts.

Command MenuCommand MenuCommand MenuCommand MenuCommand Menu - A list of functions programmedby the security company. They can perform mostcommand center functions with only two orthree keystrokes on the keypad.

60

Entry DelayEntry DelayEntry DelayEntry DelayEntry Delay - A programmed delay of system alarmresponse allowing an individual to enter anarmed area through the correct point and disarmthe area. If not disarmed before the delay timeexpires, the system begins an alarm responsewhich may include reports to the central station.

Exit DelayExit DelayExit DelayExit DelayExit Delay - A programmed delay of system alarmresponse allowing exit after arming an area.Failure to exit before the delay time expires,causes entry delay to begin. The system mustthen be disarmed. If not disarmed before thedelay time expires, the system begins an alarmresponse which may include reports to thecentral station.

Faulted PointFaulted PointFaulted PointFaulted PointFaulted Point - A point that is not normal (a dooror window is open).

Force ArmForce ArmForce ArmForce ArmForce Arm - To turn on (arm) the security systemeven though one or more points are faulted. Forcearming bypasses the faulted points.

Idle Text Idle Text Idle Text Idle Text Idle Text - The security system displays idle text atkeypads when it is not performing a userrequested function. Idle text shows the armingstatus of the system.

Master ArmMaster ArmMaster ArmMaster ArmMaster Arm - To turn on (arm) both interior pointsand perimeter points.

MenuMenuMenuMenuMenu - A list of functions executed from a commandcenter.

Opening ReportOpening ReportOpening ReportOpening ReportOpening Report - A report the system can beprogrammed to send to the central stationindicating that an area is disarmed. Openingand closing reports are commonly used bycommercial accounts.

Perimeter ArmPerimeter ArmPerimeter ArmPerimeter ArmPerimeter Arm - An arming command that armsonly the perimeter points.

61

PointPointPointPointPoint - A detection device, or group of devicesconnected to the security system. Points displayindividually at the command centerwith customtext. The text can describe a single door, motionsensor, smoke detector, or an area such asUPSTAIRS or GARAGE.

RelayRelayRelayRelayRelay - The system may have relays programmed toprovide control of devices such as premiseslighting or entry gates. The security companyprograms relays for automatic control and/orcontrol from the command center.

TroubleTroubleTroubleTroubleTrouble - A service condition that needs to becorrected, such as a broken wire.

63

MaintMaintMaintMaintMaintenance and Serenance and Serenance and Serenance and Serenance and ServiceviceviceviceviceThis security system requires very little maintenance,however, test the system weekly to ensure it is workingproperly. A test schedule and maintenance program canbe arranged. If a change in operation is noticed duringnormal use or testing, call for service as soon aspossible. Do not attempt to repair the control panel,command centers, or detectors yourself.

How to Clean the Command CenterHow to Clean the Command CenterHow to Clean the Command CenterHow to Clean the Command CenterHow to Clean the Command CenterIf the keypad gets dirty, apply a household glass cleanerto a clean cloth or paper towel and wipe the surface.Do not spray any liquid directly onto the commandcenter. It may leak inside the case and damage electricalcircuits.

YOUR ALARM COMPANY IS

CALL BEFORE TEST___________________

64

F.01U.261.693-01 11/11

f01u261693-01 security system user guide (d1255...

Documents