Ahmed Othman MohammedAhmed Othman Mohammed

A challenging career opportunity in the communication & A challenging career opportunity in the communication & Network field, whereby my analytical and interpersonal Network field, whereby my analytical and interpersonal skills can be further developed and appliedskills can be further developed and applied..

• • Good interpersonal and communication skills.Good interpersonal and communication skills.• • Hard work and ability to work in a team. In addition to perfect ability Hard work and ability to work in a team. In addition to perfect ability to work with different nationalities.to work with different nationalities.• • Goal oriented, determining the goals to be achieved, the techniques Goal oriented, determining the goals to be achieved, the techniques to be followed and the time frame within which these goals are to be to be followed and the time frame within which these goals are to be attained.attained.

Bc. Communication & Electronics Engineering 2004 – Cairo University

5 Years Experience RF Engineer

Cisco Certified Network Associate 2003

World Wide Experience:Pakistan UAE KSAEgypt

• RF Validation process for proposed candidate sites.

• RF Survey & planning for proposed WiMAX coverage areas.

•Configuring site parameters to improve site performance.

•RF simulations & prediction using WiMAX Planning tool such as ATOLL.

• Drive test using different tools such as WIFTA, COUEI & Kannon.

• Check site performance & Statistics using Motorola EMS.

• KPIs Check & WiMAX Parameters Optimization.

WiMAX RF Planning & Optimization ExperienceWiMAX RF Planning & Optimization Experience• 1 Years Motorola- WiMAX RF Planning & Optimization (2009)1 Years Motorola- WiMAX RF Planning & Optimization (2009)•Motorola-Etihad Atheeb Project (KSA)Motorola-Etihad Atheeb Project (KSA)

Dubai Marina Mall• Indoor RF Survey, Walk & Simulation Test, Design Antenna Location.

• Traffic analysis, EIRP Calculation & Schematics Diagram.

•Optimizing 2G & 3G Indoor Solutions.

•Passive Solution Design.

• Active Solution Design using Andrew Active Equipments.

• Temporary Solution using Andrew RF Repeaters.

• Walk test & simulation using TEMS & NEMO tools, R&S test Txr.

Indoor RF Planning & Optimization ExperienceIndoor RF Planning & Optimization Experience• 1 Years Motorola- IBS Experience (2008)1 Years Motorola- IBS Experience (2008)•Motorola-DU Project (Dubai-UAE)Motorola-DU Project (Dubai-UAE)

Motorola BSS ExperienceMotorola BSS Experience• 3 Years Motorola-BSS Experience (2005-2007)3 Years Motorola-BSS Experience (2005-2007)•Motorola-Mobinil Project (Egypt)Motorola-Mobinil Project (Egypt)•Motorola-Mobilink Project (Pakistan)Motorola-Mobilink Project (Pakistan)

Installation and commissioning Motorola BSS Equipments.

Operation & Maintenance of the Network (BTS/BSC/XCDR/PCU).

Installing, Troubleshooting & commissioning various Rectifiers.

OMC-R including Fault Management & Configuration Management.

Providing the BSS equipments technical support.

Site Master (Bird, Tektronix.., etc) VSWR Sweep Test.

Site Integration (Drive Test) using TEMS Kit.

Installing Backup Battery Racks.