“The Eurotechs are 20% faster than

our other machines - without changing

anything.”Doug Coster - Vice President Nolte Precise Manufacturing

“Not only is the Eurotech faster than the compe��on,

it’s technology allows us to truly run Lights-out and that’s worth even more...”

Jeff Roth - Owner Chasco Machine & Manufacturing.

Technology - Runs Faster Sleeps Less

WIN WITH TECHNOLOGY

11-Axis Turn/Mill CenterNew Trofeo B446 B465 Series

Complete parts in one-op...eliminate handling, fixturing, inspections, wasted time and floor space!

Max Size Max SizeMODEL Bar Chuck

B446 1.77/2.0" 10"

B465 2.56/2.75" 12"

The TROFEO range of dual-turret dual-spindle machining centers -- the ultimate for bar machining and auto loaded components. The main performance benefits offered: Reduction of cycle times Great rigidity to allow machining

of tough materials Load up to 192 cutting tools for

machining of complex parts and reduce set-up times

Ergonomics for quick and easy access for retooling operations

Up to 48 live tools for milling ops. EUROPE’s #1 selling multi-axis

turn/mill center Programmable parts gantry and

conveyor system for the main and sub spindle, capable of catching remnants and reverse dropping them off the parts conveyor.

The superior design delivers extremely efficient and fast production of complex parts using live tools, C-axis and Y-axis.

The Eurotech Speed SecretEurotech machines are designed from the ground up to be fast and automated with: Gap elimination: Eurotech’s logic software Indexing on the fly Elimination of dwell times Incred-ible pick-off speeds Zero wait for C-axis engagement on live tool machines ClearShift 2-axis pro-grammable sub-spindle eliminates interference and decreases cycle times Built-in, no add-on automa-tion CNC controls loaded with “options”

“Once we compared, it was clear from how Eurotech designed, built and packaged the machine with all the hardware and so�ware they were the most serious about throughput and had a much faster cycle �me.”

- Dave Fricke, Millennium

Fabco turret, EGS Tooling

SBS: EUROTECH SAFETY SOFTWARE TOOL LOAD MONITORING - This sys-tem monitors the loading of the most heavily used tools: e.g. 1st OP. cutting tools, roughing tools, drills or U-drills. It ensures safe automatic machining with limited operator presence.

ClearShift allows interference free, simultaneous machining of T1 on S1 and T2 on the offset S2

Legend = • S1: main spindle • S2: sub-spindle • T1: upper turret • T2: lower turret

STANDARD EQUIPMENT:- 30-degree slant cast-iron bed- Cartridge spindles and air purge

on both main and sub-spindle - Two 12-station servo-turrets - 192 tool capacity with SY-2 - EGS

Tooling- Sub-spindle with B and E axial

traverse- Clear-Shift sub-spindle- Polygon Turning

- Rigid tapping

The ClearShift® sub-spindle features 2-axis programmable movement (longitudinal and transversal); and is offset from the main spindle elimi-nating most interference problems between the two turrets and improves cycles times and allows safer, simpler and faster set-up times. Both turrets can machine on main or subspindle.

Over $60,000 in Options - plus many productive Machine features & equipment INCLUDED

ClearShift Position with 2-axis sub-spindle B and E-axes

- G54-G59/G80-G89- High Pressure Coolant with

Filtration System- G10 Programmable Input- Live Tooling Package- Standard Tooling Package- Air Conditioned Electronics- B-Axis Stress Control on Sub-spindle- Fanuc 31i-T Series three channel

control - Unexpected Disturbance

Detection (Air bag)- Eurotech’s Servo Turret Set-up Check- Live Tools from 2,000 to 60,000

RPM available- Virtually Zero Chip-to-Chip Tool

Change Time- Disc Brake on Main and Sub-

spindles- Finished parts conveyor - Scale feedback on the Main

and Sub-spindle C-axes, and Heidenhein scales on the E-axis

- Sub-spindle, ejector, air blow and confirmation

- Coolant system featuring 7-bar pumps and filters

- Air conditioned electrical cabinet - Tool probing system- Bar-feeder interface- Chip conveyor - SBS tool load monitoring system- Eurotech “GAP ELIMINATION” soft-

ware- Tool Life Management- Color Graphics Screen with 10.4”

Color LCD- Full Keypad with Custom Touch Keys- Macro A & Macro B- RS232/PCMCIA Interface/Ethernet- Extra Memory- Eurotech EASY CYCLES- Programmable parts gantry and

conveyor system for the main and sub spindle, capable of catching remnants and reverse dropping them off the parts conveyor.

“We compared Eurotech to all the other top brands and with all the features Eurotech delivers it was no comparison; Eurotech far surpasses any machine out there. We now have 4 Eurotechs.” - Chris Provini - Festo

Models available:S 2 turrets, 2 spindles, 2-axis parts gantry, E-axis sub-spindleSL 2 turrets (one with live tooling), 2 spindles (one equipped with C-axis), 2-axis parts

gantry, E-axis sub-spindleSLL 2 turrets equipped with live tooling, 2 spindles featuring C-axis, 2-axis parts gantry,

E-axis sub-spindleSLLY 2 turrets equipped with live tooling, 2 spindles featuring C-axis, Y-axis on the upper

turret, 2-axis parts gantry, E-axis sub-spindleY2 2 turrets equipped with live tooling, 2 spindles featuring C-axis, Y-axis on the upper and

lower turrets, 2-axis parts gantry, E-axis sub-spindle

B446

MACHINE TYPE B446 S B446 SL B446 SLL B446 SLLY B446 Y2

MACHINING CAPACITY

Bar capacity - std./opt. in 1.77 / 2.00 1.77 / 2.00 1.77 / 2.00 1.77 / 2.00 1.77 / 2.00

Max. machining diameter in 9..6 9.6 9.6 9.6 9.6

Max. swing over diameter in 20.0 20.0 20.0 20.0 20.0

MAIN SPINDLE

Max. speed rpm 5000 5000 5000 5000 5000

Spindle nose ASA 5” 5” 5” 5” 5”

Spindle bore in 2.17 2.17 2.17 2.17 2.17

Chuck diameter in 8 8 8 8 8

Motor power HP 20.0 20.0 20.0 20.0 20.0

C-axis: least input value deg - 0.001° 0.001° 0.001° 0.001°

SUB-SPINDLE

Max. speed rpm 5000 5000 5000 5000 5000

Spindle nose ASA 5” 5” 5” 5” 5”

Spindle bore in 2.17 2.17 2.17 2.17 2.17

Chuck diameter in 6.5 6.5 6.5 6.5 6.5

Motor power HP 15 15 15 15 15

C-axis: least input value deg - - 0.001° 0.001° 0.001°

ClearShift travel in 4.72 4.72 4.72 4.72 4.72

UPPER TURRET

No of stations no. 12 12 12 12 12

Max no. of static tools no. 96 96 96 96 96

Turret indexing (1 pos) sec 0.10 0.10 0.10 0.10 0.10

Max no. of live tools no. - 24 24 24 24

RPM live tool - std. / max rpm - 4000 / 60,000 4000 / 60,000 4000 / 60,000 4000 / 60,000

Motor power (30 min. rating) HP - 5 geared 5 geared 5 geared 5 geared

LOWER TURRET

No of stations no. 12 12 12 12 12

Max no. of static tools no. 96 96 96 96 96

Turret indexing (1 pos) sec 0.10 0.10 0.10 0.10 0.10

Max no. of live tools no. - - 24 24 24

RPM live tool - std. / max rpm - - 4000 / 60,000 4000 / 60,000 4000 / 60,000

Motor power (30 min. rating) HP - - 5 geared 5 geared 5 geared

COOLING SYSTEM

Tank capacity gal 120 120 120 120 120

DIMENSIONS AND WEIGHT

Machine with chip conveyor in 173 x 85 w x 89 h

Spindle center height in 42 42 42 42 42

Machine weight with chip conveyor lb 14,500 14,700 14,900 15,490 15,855

B465MACHINE TYPE B465 S B465 SL B465 SLL B465 SLLY B465 Y2

MACHINING CAPACITY

Bar capacity - std./opt. in 2.56 / 2.75 2.56 / 2.75 2.56 / 2.75 2.56 / 2.75 2.56 / 2.75

Max. machining diameter in 9.6 9.6 9.6 9.6 9.6

Max. swing over diameter in 20.0 20.0 20.0 20.0 20.0

MAIN SPINDLE

Max. speed rpm 4000 4000 4000 4000 4000

Spindle nose ASA 6” 6” 6” 6” 6”

Spindle bore in 3.15 3.15 3.15 3.15 3.15

Chuck diameter in 8 8 8 8 8

Motor power HP 35 35 35 35 35

C-axis: least input value deg - 0.001° 0.001° 0.001° 0.001°

SUB-SPINDLE

Max. speed rpm 5000 5000 5000 5000 5000

Spindle nose ASA 5” 5” 5” 5” 5”

Spindle bore in 2.17 2.17 2.17 2.17 2.17

Chuck diameter in 6.5 6.5 6.5 6.5 6.5

Motor power HP 15 15 15 15 15

C-axis: least input value deg - - 0.001° 0.001° 0.001°

ClearShift travel in 4.72 4.72 4.72 4.72 4.72

UPPER TURRET

No of stations no. 12 12 12 12 12

Max no. of static tools no. 96 96 96 96 96

Turret indexing (1 pos) sec 0.10 0.10 0.10 0.10 0.10

Max no. of live tools no. - 24 24 24 24

RPM live tool - std. / max rpm - 4000 / 60,000 4000 / 60,000 4000 / 60,000 4000 / 60,000

Motor power HP - 5 geared 5 geared 5 geared 5 geared

LOWER TURRET

No of stations no. 12 12 12 12 12

Max no. of static tools no. 96 96 96 96 96

Turret indexing (1 pos) sec 0.10 0.10 0.10 0.10 0.10

Max no. of live tools no. - - 24 24 24

RPM live tool - std. / max rpm - - 4000 / 60,000 4000 / 60,000 4000 / 60,000

Motor power (30 min. rating) HP - - 5 geared 5 geared 5 geared

COOLING SYSTEM

Tank capacity gal 120 120 120 120 120

DIMENSIONS AND WEIGHT

Machine with chip conveyor in 173 x 85 w x 89 h

Spindle center height in 42 42 42 42 42

Machine weight with chip conveyor lb 14,800 15,000 15,300 15,800 16,295