eriks maintenance electricians toolkit
DESCRIPTION
Designed with the maintenance electrician in mind, this brochure covers all the essential tools you will ever need.TRANSCRIPT
Maintenance Electricians Toolkit
2
LOCAL SERVICE
Combination Pliers VDE
Gripping zones for flat and round material.
▪ Cutting edges for soft and hard wire ▪ Special tool steel, forged, oil hardened ▪ Long cutting edges for thicker cable
Part number Size mm
W90A-51540160 160
W90A-51540180 180
W90A-51540200 200
Diagonal Side Cutting Pliers VDE
Precision cutting edges for soft and hard wire
▪ Clean cutting of thin copper wires, also at the cutting edge tips ▪ Vanadium electric steel, forged , oil hardened. ▪ Narrow head style for use in confined areas
Part numberSize mm
W90A-53050125 125
W90A-53050140 140
W90A-53050160 160
W90A-53050180 180
Diagonal Insulation Stripper VDE
Precision stripping holes for single (solid) conductors of 1.5 and 2.5mm²
▪ Induction hardened precision blades for soft wire up to 4.0mm dia, cutting edge hardness approx 60 HRC
▪ Vanadium electric steel, forged, oil hardened.
Part Number
W90A-53080160
Snipe Nosed Side Cutting Pliers VDE
Suitable for finer gripping and cutting work
▪ Pointed, half round jaws ▪ Serrated gripping surfaces ▪ Cutting edges for medium hard and hard wire ▪ Vanadium electric steel, forged, oil hardened. ▪ 200mm Length
Part Number
W90A-52300200
Wire Stripping Pliers VDE
For single, multiple and fine stranded conductors with plastic or rubber insulation up to a maximum of 5.0mm dia
▪ Easy adjustment to the required diameter of solid or stranded wire with knurled screw and lock nut
▪ Special tool steel, forged, oil hardened ▪ 160mm length
Part Number
W90A-54590160
Water Pump Pliers VDE
Chrome vanadium steel, oil hardened
▪ Gripping surfaces with specially hardened teeth ▪ Multi component handles ▪ Insulated up to 1,000v
Part NumberW90A-56110250
3
OPENING HOURSMon-Fri 8.30am - 5.30pm Sat 8.30am - 12pm
Cable Shears VDE
For cutting copper and aluminium single conductors as well as multiple stranded cables
▪ Not suitable for steel wire and hard drawn copper conductors ▪ Precision ground, hardened blades ▪ High grade special tool steel, forged, oil hardened. ▪ 165mm length
Part Number
W90A-53810165
Combination Pliers
Induction Hardened Cutting Edges
▪ 2 Component Soft Grip Handles ▪ Polished Head
Part Number Length (mm)
Cutting Capacity
(mm)
W90A-51490160 160 1.8
W90A-51490180 180 2.5
W90A-51490200 200 2.8
Diagonal Side Cutting Pliers
Induction Hardened Cutting Edges, for Hard and Soft Wire
▪ 2 Component Soft Grip Handles ▪ Polished Head
Part Number Length (mm)
Cutting Capacity
(mm)
W90A-52920125 125 1.5
W90A-52920140 140 1.8
W90A-52920160 160 2.0
W90A-52920180 180 2.5
Long Nosed Pliers
DIN ISO 5745
▪ Special Tool Steel, Induction Hardened ▪ 2 Component Soft Grip Handles ▪ Chromium Plated Head ▪ 160mm Long
Part NumberW90A-51630160
Bent Nosed Radio Pliers
DIN ISO 5745
▪ Special Tool Steel, Induction Hardened With a 45deg Curve ▪ 2 Component Soft Grip Handles ▪ Chromium Plated Head ▪ 200mm Long
Part NumberW90A-52330200
3 Piece Pliers SetInduction Hardened Cutting Edges
▪ 2 Component Soft Grip Handles ▪ Polished Head ▪ Set contains-
▪160mm Diagonal Side cutting Pliers
▪180mm Combination Pliers
▪200mm Radio Pliers
Part NumberW90A-53270020
4
LOCAL SERVICE
VDE Insulated Slotted Screwdriver
With Lasertip® and nicromat surface technology. The contact force is thereby reduced and prevents slipping out of the screw head.
▪ Ergonomic Kraftform® Plus handle ▪ insulated up to 1,000 V
Part Number Tip Width (mm)
length (mm)
W90A-62820025 2.5* 80
W90A-62820030 3.0* 100
W90A-62820035 3.5 100
W90A-62820040 4.0 100
W90A-62820055 5.5 125
W90A-62820065 6.5 150
W90A-62820080 8.0 175
* Without Lasertip®
VDE Insulated Phillips Screwdriver
▪ Lasertip® surface ▪ Ergonomic Kraftform® Plus handle ▪ insulated up to 1,000 V
Part Number PH Size length (mm)
W90A-63320000 PH0* 80
W90A-63320001 PH1 80
W90A-63320002 PH2 100
W90A-63320003 PH3 150
* Without Lasertip®
VDE Insulated Pozidriv Screwdriver
▪ Lasertip® surface ▪ Ergonomic Kraftform® Plus handle ▪ insulated up to 1,000 V
Part Number PZ Size length (mm)
W90A-63440001 PZ1 80
W90A-63440002 PZ2 100
W90A-63440003 PZ3 150
VDE Insulated Slotted / Phillips Plus Minus Screwdrivers
Plusminus screwdrivers for use in terminal blocks, control cabinets, switches, relays, sockets etc.
▪ Created for the new combination Plus/Minus electrical terminal screws
▪ Combines Phillips and Slotted head to give great grip and feel in the screw head
▪ SoftFinish grips for comfortable use all day ▪ German made, 5 year warranty
Part Number Size length (mm)
W42G-52809 PH/S 1 80
W42G-52808 PH/S 2 100
W42G-52806 PZ/S 1 80
W42G-52807 PZ/S 2 100
5
OPENING HOURSMon-Fri 8.30am - 5.30pm Sat 8.30am - 12pm
Wiha TorqueVario® VDE Electricians Screwdriver Set17th Edition Wiring Regulations stipulate adhering to torque settings. Germany’s Wiha Tools have converged their 1000V VDE knowledge with their EN6789 torque knowledge to now offer electrians’ the ultimate solution.
▪ VDE insulation for use near live electrical circuits ▪ Broad 1.0 to 5.0Nm clutch ideal for everything from 1Nm
Auxiliaries and 2.5Nm MCBs right up to 5Nm Isolators ▪ Six slim technology slim Bits included with a further twenty sizes
available ▪ slim technology for access to deep screws whilst still having
1000V VDE safety ▪ Direct drive handle included for general use of the slim Bits all
day ▪ Torque accurate to +-6% international standards BS EN 6789 ▪ Ideal for 17th Edition Wiring Regulation 134.1.1 ▪ German made, 5 year Warranty
Part Number
W42G-53571
VDE insulated 7pc Screwdriver Sets ▪ Featuring Lasertip® technology ▪ Kraftform multi-component handles with non roll feature ▪ Available in slotted/Phillips and slotted/Pozidriv ▪ insulated up to 1,000 V ▪ Each set includes a voltage tester
Part Number Set contains
W90A-63500140
Slotted 3.5 x 754 x 90
5.5 x 1006.5 x 125
PH1 & PH2Voltage tester
W90A-63500150
Slotted 3.5 x 754 x 90
5.5 x 1006.5 x 125
PZ1 & PZ2Voltage tester
6
LOCAL SERVICE
Slotted Head Screwdrivers
▪ Ergonomic 2 Component Handle ▪ Integrated Soft Zones ▪ Anti Slip Protection
Part Number Tip Width (mm)
Blade Length (mm)
W90A-62660025 2.5 75
W90A-62660030 3 75
W90A-62660035 3.5 125
W90A-62660040 4 100
W90A-62660045 4.5 90
W90A-62660055 5.5 100
W90A-62660070 7 130
W90A-62660090 9 160
W90A-62660100 10 185
W90A-62660120 12 200
Phillips Cross Head Screwdrivers
▪ Ergonomic 2 Component Handle ▪ Integrated Soft Zones ▪ Anti Slip Protection
Part Number PH Size Blade Length (mm)
W90A-63000001 1 80
W90A-63000002 2 100
W90A-63000003 3 150
Pozidriv Cross Head Screwdrivers
▪ Ergonomic 2 Component Handle ▪ Integrated Soft Zones ▪ Anti Slip Protection
Part Number PZ Size Blade Length (mm)
W90A-63360001 1 80
W90A-63360002 2 100
W90A-63360003 3 150
6 Piece Slotted & Phillips Screwdriver Set ▪ Ergonomic 2 Component Handle ▪ Integrated Soft Zones ▪ Anti Slip Protection ▪ Set Contains:
▪ Slotted 4.5 x 90 ▪ 5.5 x 100 ▪ 7 x 125 ▪ 9 x 150mm ▪ Phillips PH1& PH2
Part NumberW90A-63540121
6 Piece Slotted & Pozidriv Screwdriver Set ▪ Ergonomic 2 Component Handle ▪ Integrated Soft Zones ▪ Anti Slip Protection ▪ Set Contains:
▪ Slotted 4.5 x 90 ▪ 5.5 x 100 ▪ 7 x 125 ▪ 9 x 150mm ▪ Phillips PZ1& PZ2
Part NumberW90A-63540131
7
OPENING HOURSMon-Fri 8.30am - 5.30pm Sat 8.30am - 12pm
6pc Screwdriver Sets with Hexagonal Blade ▪ Featuring Lasertip® technology ▪ Kraftform multi-component handles with non roll feature ▪ Available in slotted/Phillips and slotted/Pozidriv
Part Number Set contains
W90A-63500160
Slotted 3.5 x 754 x 90
5.5 x 1006.5 x 125
PH1 & PH2
W90A-63500165
Slotted 3.5 x 754 x 90
5.5 x 1006.5 x 125
PZ1 & PZ2
7 Piece Slotted Screwdriver Set ▪ Ergonomic 2 Component Handle ▪ Integrated Soft Zones ▪ Anti Slip Protection ▪ Set Contains:
▪ 3 x 80 ▪ 3.5 x 125 ▪ 4.5 x 90 ▪ 5.5 x 100 ▪ 7 x 125 ▪ 9 x 150 ▪ 10 x 175mm
Part NumberW90A-63540090
10 Piece Screwdriver Set ▪ Ergonomic 2 Component Handle ▪ Integrated Soft Zones ▪ Anti Slip Protection ▪ Set Contains:
▪ Slotted 3 x 75 ▪ 4.5 x 90 ▪ 5.5 x 100 (2pcs) ▪ 7 x 130mm ▪ Phillips PH1& PH2 (2pcs) ▪ Pozidriv PZ1& PZ2
Part NumberW90A-63540100
8
LOCAL SERVICE
Hexagon Nut Drivers
Round blade , micro-matt.
▪ 2 component anti-slip handle ▪ 125mm long
Part number Hex size (mm)W90A-58000050 5.0
W90A-58000055 5.5
W90A-58000060 6.0
W90A-58000070 7.0
W90A-58000080 8.0
W90A-58000090 9.0
W90A-58000100 10.0
W90A-58000110 11.0
W90A-58000120 12.0
W90A-58000130 13.0
VDE Insulated Hexagon Nut Drivers
VDE insulated, individually inspected as per IEC 60900:2004
▪ Zinc phosphate ▪ Kraftform multi-component handle with
non-roll feature.
Part Number Hex Size (mm)W90A-58030055 5.5
W90A-58030060 6.0
W90A-58030070 7.0
W90A-58030080 8.0
W90A-58030090 9.0
W90A-58030100 10.0
W90A-58030110 11.0
W90A-58030120 12.0
W90A-58030130 13.0
Self Grip Universal Pliers
With adjusting screw and quick release lever
▪ Bright nickel plated
Part Number Length mmW90A-56300180 180
W90A-56300250 250
W90A-56300300 300
Crimping Tool KitCrimping tool kit comprising of an assortment of crimp terminals for conductor sizes 0.25mm to 6.00mm Complete with HP3 crimping tool and storage box
Part NumberW13C-50000
Metric Hexagon Wrench Sets with Ball End, Long
▪ Chrome Vanadium Steel ▪ In Plastic Holder
Part Number No of Pieces Contains
W90A-58580005 8 2, 2.5, 3, 4, 5, 6, 8, 10mm
W90A-58580010 9 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm
Hexagon Wrench SetsIn plastic case
Part Number No of Pieces Contains
W90A-58470025 6 2.5, 3, 4, 5, 6, 8mm
W90A-58470030 7 2.5, 3, 4, 5, 6, 8, 10mm
9
OPENING HOURSMon-Fri 8.30am - 5.30pm Sat 8.30am - 12pm
Electricians Scissors
Plastic coated finger loops
▪ Small groove in blade for stripping cables ▪ 45mm cutting length
Part Number DescriptionW09A-59692 Normal Blade
W09A-59693 Serrated Blade
Electricians Knife
Electrician’s pocket folding knife
▪ Stainless steel blade with plastic handle ▪ Wire stripping shape
Part Number W09A-51751
Metric / Imperial Pocket Tape
Metric / Imperial
▪ Stainless steel blade ▪ Nylon coated easy to read ▪ Magnetic tip ▪ Automated blade lock
Part Number LengthW09A-14743 5M / 16ft
W09A-14778 8M / 26ft
50ft Electricians Fish Tape
Pulls cables through conduit
▪ Side handle with brake ▪ Made from flexible spring steel
Part NumberW10F-50000
Insulated Electricians Knife
For work on live equipment up to 1000 volts
▪ 3 layer colour insulation coating ▪ IEC 60900, VDE certified
Part NumberW09A-51765
Claw HammersFibreglass handle for maximum shock absorption
▪ Octagonal neck and round head ▪ Bright polished ▪ Comfortable black hand grip ▪ Bright orange colour to make it
easier to find
Part Number Weight (oz/g)W09A-53627 20oz/580g
W09A-53628 28oz/800g
W09A-53630 32oz/880g
10
LOCAL SERVICE
Insulated Junior Hacksaw
VDE rated junior hacksaw
▪ 150mm ▪ Fitted with a 150mm 25tpi blade
Part NumberW44A-24821
80 Series Phosphated Adjustable Wrench
80 series adjustable wrench manufactured to DIN 3117 Form A. Phosphate finish precision-hardened and anti-corrosion treated.
Part Number Type SizeW09A-12221 8070 6” (150mm)
W09A-12222 8071 8” (200mm)
W09A-12204 8072 10” (250mm)
W09A-12205 8073 12” (300mm)
W09A-12223 8074 15” (375mm)
W09A-12206 8075 18” (450mm)
Electricians Holesaw Set
▪ Set contains 22, 29, 35, 44, 51, 64, 68mm holesaws ▪ 2 Arbors ▪ Pilot drill ▪ Supplied in a case
Part NumberW09A-52762
Electricians Stripping Tool
Precise, rapid and safe stripping of all commonly used round cable from 4mm to 28mm dia.
▪ Self-rotating inner knife for round and length cutting ▪ Self-tensioning fixing bracket for safe cable mounting ▪ Convenient stripping with steplessly adjustable cutting depth
via setting screw and self rotating inner knife ▪ Damage to inner conductors is therefore impossible ▪ Spare blade in the tool. ▪ Ergonomically designed lower tool body.
Part NumberW42G-53553
239 Junior Hacksaw
150mm 6inch
▪ Frame of rigid zinc plated flat steel and an ergonomic plastic, pistol-grip styled handle.
▪ Replacing and tensioning of blade through adjustment of the nut incorporated in the handle.
Part Number DescriptionW09A-14317 150MM (6IN) Hacksaw
W09A-14024 Pack of 10 saw blades
11
OPENING HOURSMon-Fri 8.30am - 5.30pm Sat 8.30am - 12pm
Automatic Wire StrippersCompact standard tool for all current cable cross-sections, and insulating materials.
▪ For single, multiple and fine stranded cables of 0.2 up to 6.0mm² with standard insulation
▪ Adapts automatically to the respective cable cross section. Prevents damage to the conductor.
▪ Adjustable length stop from 6.0 - 18.0mm for cutting the same stripping lengths during repetitive work
▪ Wire cutter for copper and aluminium wires up to 2.5mm²
Part NumberW90A-54700005
VT2 Non-Contact Voltage Indicator
The VT2 is a non-contact voltage indicator for voltages between 200 and 1000 volts.
▪ Check for presence of AC voltage in wall sockets, cables, circuit breakers and many other places
▪ A red light in the tip illuminates when AC volts are detected.
Part NumberW07H-50253
VT12 Voltage Indicator
The Martindale VT12 is an excellent value Voltage and Continuity tester. Constructed in accordance with the latest safety standards and guarantees safe and reliable measurements and testing.Automatic AC/DC detection up to 690V and continuity testing with optical and acoustic indication up to 200k ohms, with polarity indication.
Part NumberW07H-50188
MM64 Digital Multimeter
▪ 600v AC/DC ▪ 0.1µA - 200mA ▪ 1Hz - 40Hz frequency ▪ 0.1µF - 20mF capacitence ▪ Temperature measurement ▪ Continuity & diode test
Part NumberW07H-50225
12
LOCAL SERVICE
CM54 1000A AC Clamp MeterA low cost 1000A AC clamp meter, with basic Multimeter functions. Capable of clamping a 70 x 18mm busbar.Along with AC current, it also measures AC and DC volts, resistance and continuity. Includes Max and Hold buttons.
▪ AC current 100mA - 1000A ▪ 750V AC, 1000V DC ▪ 2000M resitance range ▪ Audible continuity ▪ Jaw diameter 57mm ▪ Supplied with standard test leads, carry case and battery
Part NumberW07H-50003
MARLOKKIT1 Lock-off KitThe Martindale universal lock-off kit is compatible with most circuit breakers. It is supplied with a padlock with a unique key, and a safety hasp that enables multiple users to lock off with space for up to 6 padlocks.
Part NumberW07H-50254
13
OPENING HOURSMon-Fri 8.30am - 5.30pm Sat 8.30am - 12pm
Prosafe LED Flashlight
160 lumen white CREE LED
▪ Aluminium, made for durability ▪ Focus control with dimming function ▪ Tactical switch operation ▪ Water resistant
▪ Uses and includes 2 x AA batteries ▪ Includes nylon carry strap and pouch
Part NumberW24B-50000
Thread Restorer
For cleaning out blocked threads in electrical boxes
Part Number Thread Size (mm)W24C-10132 M3.5 x 0.6
W24C-10133 M4 x 0.7
Duracell Procell
The leading industrial and commercial battery in the UK
▪ New improved performance ▪ Advanced longer life power for professional usage ▪ Proven, trusted, reliable energy source ▪ Packed in reclosable boxes of 10 ▪ For professional and volume usage
Part number Type VoltageW70B-10173 AA/LR6 1.5
W70B-10171 AAA/LR03 1.5
W70B-10170 9V/6LR61 9
W70B-10175 C/LR14 1.5
W70B-10176 D/LR20 1.5
Masonry Drill Set
▪ All steel case ▪ set contains:
▪ 4, 5, 6, 6, 8, 10, 12mm drills
Part NumberW90A-12680010
7pc SDS-Plus Hammer
Control Cabinet Wrench ▪ Zinc cast iron ▪ 6 7 & 8mm Squares ▪ 9mm three square ▪ Flange with chain 3 to 5mm ▪ double bit slot 1 x 7mm and PH2 ▪ Plastic adaptor 1/4” and square
radiator valve wrench
Part NumberW90A-55880005
Drill Set
▪ All Steel Case ▪ Set contains:
▪ 5 x 110, 6 x 110, 6 x 160, 8 x 160, 10 x 160, 12 x 160
Part NumberW90A-12530005
14
LOCAL SERVICE
WD40Cleans - Agitates dirt, marks and grease making it easy to wipe away. Also dissolves adhesives for removal of residue
▪ Protects - Corrosion resistant ingredients shield against moisture
▪ Lubricates - Lubricating agents hold firmly to moving parts
▪ Penetrates - Loosened rust to metal bonds and frees frozen parts.
Part Number SizeW84A-33740 100ml
W84A-33720 250ml
W84A-33722 450ml
W84A-33723 600ml
Knee Pads
▪ Hook and loop fastening ▪ Soft ‘bear’ lining ▪ Made from strong synthetic leather with rubber
Part numberW09A-60293
RX® Max WipeRX® Max wipes are industrial tried and tested, heavy duty hand and surface cleaner. Max wipes will help clean the hands and many surfaces of oil and water based paint, adhesives, sealants, oil, grease and more. Max wipes are also effective against pathogenic bacteria and viruses.
▪ Anti-bacterial, Anti viral action ▪ Contains 80 wipes
Part NumberW89A-50598
RX® Multi WipeRX® Multi Wipes are an industry heavy duty hand and surface moise cleaning wipe. RX® Multi Wipes will clean hands and many sufaces of oil and water based paint, adhesives, sealants, oil, grease and more.Anti-bacterial, Anti viral action
▪ Quickly cleans hands - without water ▪ Contains 150 wipes
Part NumberW89A-50597
15
OPENING HOURSMon-Fri 8.30am - 5.30pm Sat 8.30am - 12pm
RX® Flat-Fold Disposable Mask
A single use, lightweight, ergonomically shaped disposable respirator for protection against non toxic and toxic particles.
▪ Lightweight; P1 & P1V = 2g; P2 &P2V = 3g, P3V = 4g ▪ Multi layered filter medium electrostatically charged ▪ Ergonomically shaped for comfort and ease of use ▪ Adjustable head straps to provide individual fit ▪ Adjustable nose clip to ensure a good seal around the nose ▪ Individually packed complete with instructions for use ▪ Conforms to the European approved standard EN149:2001 +
A1:2009NR ▪ Non-allergenic ▪ Exhalation Valve added for easier breathing (P1V, P2V & P3V)
Part Number Description PackagingNormal
Protection Factor
Assigned Protection
FactorW93L-50028 RX FF P1 disposable mask folded 20 4 4
W93L-50027 RX FF P1V disposable mask folded + valve 10 4 4
W93L-50029 RX FF P2 disposable mask folded 20 12 10
W93L-50030 RX FF P2V disposable mask folded + valve 10 12 10
W93L-50032 RX FF P3V disposable mask folded + valve 10 50 20
RX® Dyneema Safe3 Cut Resistant GlovesSeamless knitted Dyneema® glove with polyurethane coating.
▪ Comfort - The seamless construction provides an exceptional level of comfort, whilst the open back style allows excellent breathability
▪ Strength - This lightweight glove with Dyneema® provides excellent resistance to cut, abrasion and tear
▪ Dexterity - The glove has been designed to be tight fitting to give maximum dexterity for the most tactile of operations
▪ Knitted Wrist - Elasticised, for a snug fit. The knitted wrist is extra long for optimal wrist protection.
▪ Applications - Component handling, assembly, electronics and cutting activities ▪ Colour - Grey ▪ sold in packs of 12 pairs
Part Number SizeW93L-50057 6
W93L-50059 7
W93L-50058 8
W93L-50056 9
W93L-50055 10
16
LOCAL SERVICE
Electricians Gloves™Excellent electrical resistance
▪ Class 00 - max working AC voltage 500v ▪ Class 0 - max working AC voltage 1,000v ▪ Class 1 - max working AC voltage 7,500v ▪ Class 2 - max working AC voltage 17,000v ▪ Class 3 - max working AC voltage 26,500v ▪ Class 4 - max working AC voltage 36,000v
Class Size 8 Size 9 Size 10 Size 11
00 W98L-50751 W98L-50752 W98L-50753 W98L-50754
0 W98L-50755 W98L-50756 W98L-50757 W98L-50758
1 W98L-50760 W98L-50761 W98L-50762 W98L-50763
2 W98L-50764 W98L-50765 W98L-50766 W98L-50767
3 W98L-50769 W98L-50770 W98L-50771 W98L-50772
4 W98L-50780 W98L-50781 W98L-50782 W98L-50783
RX® Optiflex-C Safety Glasses
▪ Lightweight (31 g) ▪ Perfect fit (comfortable, soft components for nose, ear and
forehead) ▪ Polycarbonate lens with unique RX® coatings ▪ Ventilating ▪ The safety glasses adapt themselves without adjustments to
the contours of the face ▪ Stylish design ▪ Extremely flexible and unbreakable frame ▪ Impact test according to MIL-PRF-31013 standard (295-
201 m/s) ▪ compliant with EN166 + EN170 standards
Part Number Description
W93L-50000 Safety glasses with clear PC lens
RX® Optiflex-G Wide Vision gogglesThe RX® Optiflex-G wide-vision goggles offer the wearer better protection. Thanks to the wide coverage of the face, the adjustable headband and the superior impact resistance, the RX® Optiflex-G wide-vision goggles are a reference in the market. The sophisticated indirect ventilation system reduces fogging to a minimum. The soft silicone casing ensures an optimum comfort and protects against impact and chemical splashes.
▪ Lightweight (93 g) ▪ Ergonomically designed; 180° wide-vision goggles ▪ Highest optical quality lens class 1 ▪ CE approved, EN166 against splashes of chemical liquids,
large dust particles, molten metal ▪ Wide and fully adjustable elastic head headband. ▪ Indirect ventilation ▪ Anti-scratch and anti fog coating
Part Number DescriptionW93L-50004 Wide-vision goggles
17
OPENING HOURSMon-Fri 8.30am - 5.30pm Sat 8.30am - 12pm
RX® Securo Safety shoeThe RX® Securo is a quality safety shoe made of lightweight materials, with shock absorbent soles and composite toe protection, plus MS3 non-metallic penetration resistant midsole. This makes the RX® FOOTWEAR one of the most comfortable and stylish on the market.
▪ Composite toe cap which can resist a pressure of 200J
▪ Anti-perforation sole made from MS3 textile; very flexible, gives a much better walking comfort, isolates against the cold and/or heat, protects a larger area of the foot
▪ Scuff pad allows more ‘give’ at the point where the foot flexes. Ideal for jobs where kneeling is required.
▪ Quality uppers stabilises and supports the foot ▪ TPU heel support ▪ Reflective accents for high visibility ▪ Shock-absorbing comfort sole for better walking
comfort ▪ PU/rubber sole material; oil and petrol resistant ▪ HRO resistant to 300° C contact heat ▪ SRC sole for improved slip resistance ▪ Ladder grip prevents slipping on ladders ▪ Extra wide fit ▪ EU sizes: 38 - 47, UK sizes 5 - 12
Part Number Description UK sizeW93L-50005 RX Safety Shoe Securo 5
W93L-50006 RX Safety Shoe Securo 6
W93L-50007 RX Safety Shoe Securo 6.5
W93L-50008 RX Safety Shoe Securo 7
W93L-50009 RX Safety Shoe Securo 8
W93L-50010 RX Safety Shoe Securo 9
W93L-50011 RX Safety Shoe Securo 10
W93L-50012 RX Safety Shoe Securo 10.5
W93L-50013 RX Safety Shoe Securo 11
W93L-50014 RX Safety Shoe Securo 12
RX® Solido Safety BootThe RX® Solido is a quality safety boot made of lightweight materials, with shock absorbent soles and composite toe protection, plus MS3 non-metallic penetration resistant midsole. This makes the RX® FOOTWEAR one of the most comfortable and stylish on the market.
▪ Composite toe cap which can resist a pressure of 200J
▪ Anti-perforation sole made from MS3 textile; very flexible, gives a much better walking comfort, isolates against the cold and/or heat, protects a larger area of the foot
▪ Scuff pad allows more ‘give’ at the point where the foot flexes. Ideal for jobs where kneeling is required.
▪ Quality uppers stabilises and supports the foot ▪ TPU heel support ▪ Reflective accents for high visibility ▪ Shock-absorbing comfort sole for better walking
comfort ▪ PU/rubber sole material; oil and petrol resistant ▪ HRO resistant to 300° C contact heat ▪ SRC sole for improved slip resistance ▪ Ladder grip prevents slipping on ladders ▪ Extra wide fit ▪ EU sizes: 38 - 47, UK sizes 5 - 12
Part Number Description UK sizeW93L-50015 RX Safety Boot Solido 5
W93L-50016 RX Safety Boot Solido 6
W93L-50017 RX Safety Boot Solido 6.5
W93L-50018 RX Safety Boot Solido 7
W93L-50019 RX Safety Boot Solido 8
W93L-50020 RX Safety Boot Solido 9
W93L-50021 RX Safety Boot Solido 10
W93L-50022 RX Safety Boot Solido 10.5
W93L-50023 RX Safety Boot Solido 11
W93L-50024 RX Safety Boot Solido 12
18
LOCAL SERVICE
Carrying Toolbox 58cm With Carry Strap
66cm Toolbox With Organiser Lid
56cm Toolbox with Deep Non Slip Handle
Electricians Tool Pouch ▪ Reinforced material ▪ Insulation tape holder ▪ Loop large tools ▪ 1 large and 2 medium pockets ▪ Zipped pocket for documents ▪ 4 terminal screwdriver
/ pen pouches ▪ Tools not included
Part NumberW60C-10342
Universal Tool Belt ▪ Reinforced material ▪ Fits all technics accessories ▪ Adjustable size 90-120cm ▪ Quick release buckle
Part NumberW60C-10235
15 Pocket Tool belt for Tools and Small Items ▪ Reinforced material ▪ Cordless drill holster ▪ Hammer loop & tape holder ▪ Quick release buckle ▪ Tools not included
Part NumberW60C-10240
▪ Composite virgin polypropylene ▪ Wall thickness 2.5-3mm ▪ Adjustable shoulder strap ▪ Cover with 4 to 12 modular
compartments ▪ Practical designed to carry
toolbox over shoulder ▪ Non slip handle
Part NumberW09A-58900
▪ Composite virgin polypropylene ▪ Wall thickness 2.5-3mm ▪ Rounded corners for increased
resistance to impact ▪ Cover with 2 removable
organisers ▪ Portable tote tray ▪ ABS and brass closures
▪ Padlock option ▪ Non slip handle
Part NumberW09A-60672
▪ Composite virgin polypropylene
▪ Wall thickness 2.5-3mm ▪ Spacious lower compartment ▪ Side grips ▪ Portable tote tray ▪ ABS and Brass closures ▪ Padlock option
▪ Non slip handle
Part NumberW09A-58899
19
OPENING HOURSMon-Fri 8.30am - 5.30pm Sat 8.30am - 12pm
16”/410mm Hard bottom Bag
▪ Reinforced material ▪ Strong - welded plastic base ▪ 25 pockets ▪ W410 x D240 xH260mm ▪ Tools not included
Part NumberW60C-10243
12”/310mm Hard bottom Bag
▪ Reinforced material ▪ Strong - welded plastic base ▪ 17 pockets ▪ Ideal for carrying test equipment ▪ W310 x D190 x H240mm ▪ Tools not included
Part NumberW60C-10242
www.eriks.co.uk0845 006 6000
ERIKS UK
Amber Way, Halesowen
West Midlands, B62 8WG