eni 750 tech info

Download Eni 750 Tech Info

Post on 05-Mar-2015

54 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

ENI 750 BILL OF MATERIAL UNIT S/N__________ DESCRIPTIONKATOLIGHT PROVIDED MATERIAL Engine/Generating Set Generator Digital Voltage Regulator Governor System Digital Genset Controller Circuit Breaker Battery Rack Water Heater ALPHA PROVIDED MATERIAL ENCLOSURE Outdoor Sound Enclosures (60 & 69 dBA) Exhaust System Silencer Style 1 Silencer Style 2 Flex Connector Silencer Outlet Extension Rain Cap Rain Guard Bolts, Nuts and Gasket Misellaneous Bolts, Nuts and Gasket Vibration Mounts Sheet Metal Wall Panels Sheet Metal Roof Beams 4.0" x 4.0" Square Structural Channel 2.0" x 2.0" x 0.25 Angle Iron Perforated Steel Liner Sheets Wall and Ceiling Insulation - 4" Thinkness Fixed Louver - Intake Fixed Louver - Exhaust Motorized Dampers Damper Motors Damper Hardware Sound Attenuator Packs Sound Attenuator Packs (add for 60 dBA) 14 and 12 Gauge Sheet Galvaneal Sub-base Fuel Tank(w/NYC cert.) Fuel level switches Fuel fill alarm box Nuts, Bolts and Screws Alpha Power Systems EM Products EM Products EM Products EM Products EM Products EM Products EM Products EM Products Isolation Technology Wymore Wymore N/A DHK, 12"x86"DIAx22"H DHK, 12"x86"DIAx22"H FL10-19MIT-08 EXT-12-24 RC-000646 RGS-12 BNG-10 BNG-12 CK2-S8-2600 1 1 1 1 1 1 1 1 1 10 as req'd as req'd as req'd as req'd as req'd as req'd 1 1 2 4 UL, CSA 4 2 2 1 UL, NFPA, NYC 3 UR 1 as req'd N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

MANUFACTURERKatolight Marathon Marathon Barbar Colman Katolight Katolight Katolight Katolight

PART NO.ENRD750FRY4 573RSL4032 DVR2000E DYN1-10656-000-0-24 KDGC-2000 TKMA322100WL 204-169 CL140210-000

QTY/U NIT1 1 1 1 1 1 1 2

CERTIFICATIONSUL, CSA ULR, CSA, CE ULR, CSA UL, CSA

S/N

N/A CSA

Ventex 2435-4 Ventex 2415-4 Ventex Model 3160 Belimo Belimo Kinetics Kinetics Sauk Technologies Gems APS

78"W x 96"H x 4"D 78"W x 96"H x 4"D 78"W x 96"H x 4"D AF120 78"W x 96"H x 72"D 78"W x 96"H x 36"D UCTSC-1100 LS1700

N/A

CERTIFICATION CODES UL - UL LIsted Component, ULR - UL Recognized Component, CSA - CSA Certified Component, CE - CE Marked Component, NYC - meets NYC code, NFPA meets NFPA code

ENI 750 BILL OF MATERIAL UNIT S/N__________ DESCRIPTIONPiping and Fittings Fill Cap High Pressure Hose and Swag Fittings Door Handles and Fittings 6" pressure relief vent cap ELECTRICAL HARDWARE Load Center, Class 1130, Indoor, 25KAIC, 125 AF Main Breaker, 120/208 VAC 22 KAIC, 15A, 3P Breaker 22 KAIC, 20A, 3P Breaker 22 KAIC, 30A, 3P Breaker 22 KAIC, 15A, 1P Breaker 22 KAIC, 20A, 1P Breaker Seal Tight Conduit and Fittings Rigid Conduit and Fittings I-Beam Conduit Hanger Terminal Blocks End Plates Jumpers Earth/Gnd Terminal Blocks Sticky Blocks Start/Control Battery Battery Charger Battery Box Male Battery Terminal, Crimp Style Female Battery Terminal, Crimp Style Camlock Connector, Female, Set Screw Camlock Connector, Female, Set Screw Camlock Connector, Female, Set Screw Camlock Connector, Female, Set Screw Camlock Connector, Female, Set Screw Camlock Connector - Cover Interior lights, switches, and receptacles Power Cable Other control & electrical wire SQ D SQ D SQ D SQ D SQ D SQ D QO330MQ125 QO315VH QO320VH QO330VH QO115VH QO120VH 1 as req'd as req'd as req'd as req'd as req'd as req'd as req'd as req'd as req'd as req'd as req'd as req'd as req'd 4 1 4 as req'd as req'd 4 4 4 4 4 1 as req'd as req'd as req'd UL UL, CSA UL, CSA UL, CSA UL, CSA UL, CSA N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

MANUFACTURER

PART NO.

QTY/U NITas req'd 1 as req'd as req'd 2

CERTIFICATIONS

S/NN/A N/A N/A N/A

Sauk Technologies

2160

Wago Wago Wago Wago Battery Plus Sens NOCO Marine 8DA FC-24-20-2031U HM484

UL N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

Camlock Crouse-Hinds Camlock Crouse-Hinds Camlock Crouse-Hinds Camlock Crouse-Hinds Camlock Crouse-Hinds Camlock Crouse-Hinds General Cable

E1016-1700, BLK, PHA E1016-1702, RED, PHB E1016-1705, WHT, PHC E1016-1700, BLU, NEUT. E1016-1704, GRN, GND. A-100602-1

UL, CSA UL, CSA UL, CSA UL, CSA UL, CSA

UL, CSA per NEC code

CERTIFICATION CODES UL - UL LIsted Component, ULR - UL Recognized Component, CSA - CSA Certified Component, CE - CE Marked Component, NYC - meets NYC code, NFPA meets NFPA code

Diesel T1

750 kW @ 60 Hz. Stand-By Power

D750F*Y4

680 kW @ 60 Hz. Prime Power

Katolights commitment to quality has been an industry standard since 1952 Katolight specializes in custom designing any application to meet the most difficult specifications Each and every unit is factory tested. This can eliminate costly startup and installation delays Katolight supplies a broad range of accessories to match any requirement worldwide Katolight generator sets come standard with a 2 year, 1500 hour limited warranty Optional warranty periods are also available, contact factory for details This model accepts 100% of nameplate rating, per NFPA 110 This engine is EPA Tier I certifiedModel # Volts Hz Phase Power Factor Standby Ratings Amps kW/kVA Prime Ratings Amps kW/kVA Connection

D750FRY4 D750FPY4 D750FJY4 D750FNY4

277/480 120/208 120/240 347/600

60 60 60 60

3 3 3 3

0.8 0.8 0.8 0.8

1128 2255 2602 902

750/937.5 750/937.5 750/937.5 750/937.5

1022 2045 2359 818

680/850 680/850 680/850 680/850

12 LEAD HI WYE 12 LEAD LOW WYE 12 LEAD HI DELTA 4 LEAD WYE

D750FRY4_05-05

D750F*Y4 DIESEL Gen-Set

STANDARD EQUIPMENTCONTROL PANELModel #45 control panel AC voltmeter, 3 , 2% accuracy AC ammeter, 3 , 2% accuracy Combination VM/AM selector switch, 4 position Frequency meter, 3 , 55-65 Hz. Vibration shock mounts (4) Engine control - KASSEC-24 VDC, with cyclic cranking timer 4 engine shutdowns with separate failure lights High water temperature Low oil pressure Engine overspeed Engine overcrank Engine gauges - 2" Battery voltmeter Water temperature Oil pressure Running time meter - 5 digits 3 position mode switch (auto-off-manual)

ENGINE (cont.)Governor Electric Isochronous Base - formed steel Flywheel & Enclosure Charging alternator - 24V Battery box & cables Flexible fuel & exhaust connectors EPA Certified Engine

GENERATORA.C. Generator Brushless design Single bearing Direct connection with flex plate Class H insulation All models manufactured to meet NEMA MG1- 22.4 and CSA standards Telephone influence factor is well within NEMA standards Wave form deviation factor is no more than 5%, well within NEMA standards Harmonic content is 3.0% maximum Permanently lubricated ball type bearings Generator is self-ventilated Drip-proof construction

ENGINEAir cleaner Oil pump Full flow oil filter Jacket water pump Thermostat Exhaust manifold dry Blower fan & fan drive Radiator - unit mounted Vibration isolators - pad type Electric starting motor - 24V

VOLTAGE REGULATORVoltage adjust rheostat EMI filter (Internal Electromagnetic Interference) Underspeed protection Overexcitation protection Fully encapsulated Regulation - 0.25%

Drawing above for illustration purposes only, based on standard open power 480 volt generator. Lengths may vary with other voltages.

D750F*Y4 Diesel Gen-Set

ENGINE TECHNICAL DATA

60 Hz

Model:.................................................................................................................... S12A2-Y1PTA-1 Type: ............................................................................................................................ 4-Cycle Aspiration: ...................................................................................................... Turbocharged Aftercooled Cylinder Arrangement: (Number, inline, V, etc.) ...............................................................12-V Displacement - Cu. In. (lit) .........................................................................................2,071 (33.9) Bore - in. (cm) x stroke - in. (cm)....................................................................... 5.91 (15.0) x 6.3 (16.0) Compression Ratio: ....................................................................................................... 15.3:1 Rated RPM..................................................................................................................... 1800 Rating Standby Prime BMEP: psi (kPa) .............................................................................256 (1,765) ............................................234 (1,613) Maximum Power at Rated RPM - bhp(kW)......................................1,207 (900) ............................................1,099 (820)

INSTALLATION DATA *Exhaust SystemGas Temp. (Stack): F ( .................................................. 820 (438) ................................................686(363) C) Gas Volume at Stack Temp.: CFM (m3/min)................................7,353 (208) ............................................6,980 (198) Maximum Allowable Back Pressure: in. H20 (kPa) ........................................... 23.6 (5.9) ............................................... 23.6 (5.9)

Cooling SystemAmbient Capacity of Radiator: F ( C)........................................ 100 (38) ................................................. 100 (38) Maximum Allowable Static Pressure on Rad. Exhaust: in. H2O (kPa)................................... 0.5 (0.12) ............................................... 0.5 (0.12) Water Pump Capacity: gpm (lit/min)............................................291 (1,100) ............................................291 (1,100) Heat Rejection to Coolant: BTUM (kW).......................................33,740 (593)...........................................29,987 (527) Heat Radiated to Ambie

Recommended

View more >