engineering projects (india) ltd., (a govt. of...

ENGINEERING PROJECTS (INDIA) LTD.,

(A Govt. of India Enterprise)

PRICED BOQ

Item

No.DESCRIPTION OF ITEM UNIT QTY RATE (Rs) AMOUNT (Rs) REMARKS

EARTH WORK

1 Earthwork excavation for foundation of buildings, water supply, sanitary lines and

electrical conduits either in pits or in trenches of all depth and width in all kinds of

soil with all lifts including dressing the bottom and sides of pits and trenches, stacking

the excavated soil clear from the edges of excavation with all lead and lifts after

breaking of clods, including cost and conveyance of all materials, labour, HOM of

machinery, with all leads and lifts, loading and unloading, transportation , all other

incidental charges, complete for successful completion of work as per specifications,

and as directed by the Engineer-in- charge.

Cum 50.00 144.00 7200.00

2 Filling available excavated earth (excluding rock) in sides of foundations upto plinth

in layers not exceeding 20cms in depth, compacting each deposited layer by ramming

after watering to OMC to required density, including cost of all materials, labour,

HOM of machinery, with all leads and lifts, loading and unloading, transportation cost

and conveyanceof all materials, all other incidental charges, complete for successful

completion of work as per specifications, and as directed by the Engineer-in- charge.

Cum 45.00 78.30 3523.50

PLAIN CEMENT CONCRETE

Name of work: Tender for the Construction of New Building for Chemical Sciences for Wing – C (Top) (G+3) at Indian Institute of Science (IISc)

Campus, Bangalore, Karnataka (Package - I)

SRO/MKT/TH/294dated16.07.2014

Signature of Bidder with Seal 1 of 47 EPI



PRICED BOQ

Item


3 Providing and laying in position plain cement concrete of mix M7.5 with OPC

minimum cement content of 180 kgs, using 40mm and down size graded granite metal,

coarse aggregates @ 0.85 cum and fine aggregates @ 0.57 cum machine mixed,

concrete laid in layers not exceeding 15cms. thick, well compacted, below footings,

below Ground Floor, below plinth Beams & below plinth protection etc. including

cost of all materials, labour, HOM of machinery, curing, with all leads and lifts,

loading and unloading charges, transportation cost and conveyance of all materials and

all others incidental charges complete for successful completion of work as per

specifications and as directed by the engineer in charge.

Cum 10.00 3575.70 35757.00

4 Providing and laying in position plain cement concrete of mix M 15 with OPC

minimum cement content of 240kgs, with 20mm and down size graded granite metal,

coarse aggaregates @ 0.878 cum and fine aggregate @ 0.459 cum machine mixed,

concrete laid in layers not exceeding 15cms thick, well compacted in Plinth, Cills,

Above Cinder Concrete, Coping, Base of Railings, Encasing of pipes, etc.

including cost of all materials, labour, including with necessary formwork HOM

machinery, curing, with all leads and lifts, loading and unloading charges,

transportation cost and conveyance of all materials , all other incidental charges etc.,

complete for successful completion of work as per specifications and as directed by the

Engineer in Charge .

I Plinth, Cills, Coping, Base of Railings, etc.

a Ground Floor Cum 5.00 4059.00 20295.00

b First Floor Cum 5.00 4079.70 20398.50

c Second Floor Cum 5.00 4099.50 20497.50

d Third Floor Cum 5.00 4120.20 20601.00

e Terrace Cum 1.00 4140.90 4140.90




PRICED BOQ

Item


II Providing and laying in position plain cement concrete of mix M 15 with OPC

minimum cement content of 240kgs, with 20mm and down size graded granite metal,

coarse aggaregates @ 0.878 cum and fine aggregate @ 0.459 cum machine mixed,

concrete laid in layers not exceeding 15cms thick, well compacted in DPC above

Cinder Concrete, etc. with Water proofing Compound at one Kg of Compound

per bag of cement including cost of all materials, labour, including with necessary

formwork HOM machinery, curing, with all leads and lifts, loading and unloading

charges, transportation cost and conveyance of all materials, all other incidental

charges etc., complete for successful completion of work as per specifications and as

directed by the Engineer in Charge .

a Ground Floor Cum 40.00 4126.50 165060.00

b First Floor Cum 40.00 4147.20 165888.00

c Second Floor Cum 40.00 4167.90 166716.00

d Third Floor Cum 40.00 4188.60 167544.00

e Terrace Cum 1.00 4209.30 4209.30

REINFORCEMENT STEEL

5 Labour Charges for providing Thermo-mechanically treated (TMT)Fe-500 grade steel

bar reinforcement for R.C.C work including straightening, cutting, bending, hooking,

placing in position, lapping and / or welding wherever required, tying with binding

wire of approved quality and anchoring to the adjoining members wherever necessary

complete for successful completion of work as per design (laps, hooks and wastage

shall not be measured and paid) including cost of materials, labour, HOM of machinery

with all leads & lifts, loading and unloading charges, transportation cost and

conveyance of all materials and all other incidental charges complete for successful

completion of work as per specifications and as directed by the Engineer-in-charge.

(Steel will be issued by EPI on free of cost)

a Ground Floor Qtl. 3.00 8750.00 26250.00




PRICED BOQ

Item


b First Floor Qtl. 3.00 8750.00 26250.00

c Second Floor Qtl. 3.00 8750.00 26250.00

d Third Floor Qtl. 3.00 8750.00 26250.00

e Terrace Qtl. 3.00 8750.00 26250.00

REINFORCEMENT CONCRETE

6 Labour charges for laying cement concrete using 20mm and down size granite coarse

aggregate & fine aggregate READY MIXED CONCRETE (RMC) of grade M 25 with

minimun cement content of 340 kg/cum for R.C.C , Plinth Beams, Columns,

Beams, Lintels, Staircase, Roof Slab, Pergola Beams, Retaining Wall, Mumty

floor etc. laid in 15 cms thick layers and well compacted including pumping,

vibrating, curing smooth finish in CM 1:3, including cost of all materials, labour, HOM

of machinery & equipments, curing, with all leads and lifts, loading and unloading

charges, transportation cost and conveyance, all other incidental charges , complete for

successful completion of work as per specifications , and as directed by the Engineer-

in-charge, at all floor levels. (exclusive of cost of steel, fabrication charges, centering

& shuttering/ formwork) (RMC will be supplied by EPI on Free of cost)

Cum 35.00 500.00 17500.00

7 Providing and casting RCC loft (atta) 7.5 cms thick with cement concrete M20 with

minimun cement content of 320 kg/cum using clean granite or trap jelly of 20mm

and down size with necessary reinforcements as per design including form work.

Centering, curing, finishing the exposed faces with cement mortar (1:3) etc., complete

for successful completion of work including cost of all materials, labour, HOM of

machinery, with all leads and lifts, loading and unloading charges , transportation cost

and conveyance of all materials curing, all other incidental charges complete for

successful completion of work as per specification and as directed by the Engineer in

Charge (exclusive of cost of steel and fabrication charges ) .

a Ground Floor Sqm 30.00 330.30 9909.00




PRICED BOQ

Item


b First Floor Sqm 37.00 336.60 12454.20

c Second Floor Sqm 35.00 343.80 12033.00

d Third Floor Sqm 30.00 350.10 10503.00

8 Extra for providing throating or drip moulding to R.C.C chajja and whereever

required with plastering (labour charges only) as per specifications at all levels

complete, including cost and conveyance of all materials, labour, HOM of machinery,

with all leads and lifts, loading and unloading charges , transportation cost and

conveyance, curing, all other incidental charges complete for successful completion of

work as per specification and as directed by the Engineer in Charge

metre 350.00 13.50 4725.00

FORMWORK

9 Providing and removing necessary centering, shuttering, strutting, propping etc, and

removal of formwork for sides and soffits of BEAMS, beam haunchings, cantilever

girders, LINTELS, including cost of all materials, labour, necessary formwork , with

all leads and lifts, loading and unloading charges , HOM of machineries and

equipments transportation cost and conveyance of all materials and all other

incidental charges etc., complete for successful completion of work as per

specifications and as directed by the Engineer-in-charge.

I Centering height upto 3.5


b First Floor Sqm 50.00 250.00 12500.00


d Third Floor Sqm 50.00 250.00 12500.00

e Terrace Sqm 50.00 250.00 12500.00

SOLID BLOCK WORK




PRICED BOQ

Item


10 KSRB 5-14: Providing and constructing precast concrete solid blocks with

compressive strength not less than 35kg/sqm with cement mortar 1:4 masonry ( quoin,

jamb, closer blocks) with solid concrete blocks of size 40*20*20cms conforming to

I.S:2185/1965 in superstructure including cost of materials, labour charges, providing

& removing necessary scaffolding, curing, transportation cost and conveyance all other

incidental charges etc complete for successful completion of work as per specifications

and as directed by the Engineer-in-charge.


b First Floor Sqm 1250.00 675.00 843750.00


d Third Floor Sqm 1250.00 675.00 843750.00

e Terrace Sqm 250.00 675.00 168750.00

11 KSRB 5-13 : Providing and constructing non-load bearing wall with cement concrete

solid blocks with compressive strength not less than 35 Kg/sqm with cement mortar

1:4 (jamb,closer blocks) with blocks of size 40*10*20cms. (1xbxh) conforming to I.S

:2185/1965 in superstructure including cost of materials. labour charges, providing &

removing necessary scaffolding, transportation cost and conveyance of all materials,

curing & all other incidental charges etc complete for successful completion of work as

per specifications and as directed by the Engineer-in-charge.


b First Floor Sqm 250.00 526.50 131625.00


d Third Floor Sqm 250.00 531.90 132975.00

e Terrace Sqm 10.00 534.60 5346.00

BRICK WORK




PRICED BOQ

Item


12 Providing and construction of burnt brick masonry with approved quality of non-

modular bricks of standard size of class designation 75 (machine moulded wire cut

bricks) with cement mortar 1:6 for basement and superstructure including the cost of

all materials, scaffolding, labour, curing, HOM of equipments and machineries, with all

leads and lifts loading and unloading charges, transporation cost and conveyance of all

material & other incidental charges etc complete for successful completion of work as


Cum 15.00 6060.60 90909.00

STEEL AND ALUMINIUM WORK

13 Providing and fixing gear operated type ROLLING SHUTTERS of approved make

out of 18 guage, 75mm wide cold rolled steel laths of convex corrugation, with side

guides and bottom rail, with interlocking arrangements for steel laths by means of

alternate clips, suspension shaft with High tension coil type springs( two numbers),

mounted on specially designed pipe shaft, with bracket plates, guide channels, ball

bearing arrangements for inside and outside locking with gear operations complete

including pulling hooks 4Nos, handles with all fittings and accessories, painted with a

coat of red lead paint (without top cover) including the cost of all materials,

scaffolding, labour, curing, HOM of equipments and machineries, with all leads and

lifts loading and unloading charges, transporation cost and conveyance of all materials

all other incidental charges etc complete for successful completion of work as per


Sqm 20.00 2571.30 51426.00

14 Providing and fixing top covers made out of 20 guage MS sheet over rolling shutters

bent to shape including cost of red lead primer coat of painting, including the cost of

all materials, scaffolding, labour, curing, HOM of equipments and machineries, with all

leads and lifts loading and unloading charges, transporation cost and conveyance of all

material &other incidental charges etc complete for successful completion of work as


metre 5.00 421.20 2106.00




PRICED BOQ

Item


15 Providing and fixing mild steel. grill work for windows and ventilators weighing 21

Kg/sqm using M.S. flats, or M.S. square rods, or combination of M.S. flats and square

rods as per approved design, drawing including cutting steel sections and welding

,grinding to get a smooth surface to required pattern with a coat of red lead primer,

including the cost of all materials, scaffolding, labour, curing, HOM of equipments and

machineries, with all leads and lifts loading and unloading charges, transporation cost

and conveyance of all other materials & all other incidental charges etc complete for

successful completion of work as per specifications and as directed by the Engineer-in-

charge.

a Ground Floor Kgs 3750.00 72.00 270000.00

b First Floor Kgs 3500.00 72.00 252000.00

c Second Floor Kgs 3100.00 72.00 223200.00

d Third Floor Kgs 2200.00 72.00 158400.00

e Terrace Kgs 100.00 72.00 7200.00

16 Providing and fixing MILD STEEL HOLDFASTS of 40 X 6mm flat iron of length

as shown in drawing or as directed for fixing door frames to walls, fixed to door frame

with screws and embedded in masonry wall in cement concrete with split ends

including painting with red oxide, HOM of equipments and machineries, with all lead

and lifts, loading and unloading charges, transportation cost and conveyance of all

materials&other incidental charges in all floors & at all levels etc., complete for

successful completion of work as per specifications and as directed by the Engineer in

charge.

Kgs 250.00 54.90 13725.00




PRICED BOQ

Item


17 Providing, fabricating and fixing M.S.Hand RAILING for BALCONY,

CORRIDOR, STAIR CASE RAILINGS, LADDERS, etc. with 50 mm dia M.S.

Hollow pipe of 14 gauge, welded to 20 mm x 20 mm M.S. Square rod placed vertically,

spaced at 100 mm at regular interval of 600 mm. These vertical rods laterally tied to 3

horizontal rods spaced at equal interval. This assembly is fixed to concrete by using

expansion bolts and welding the same to reinforcement bars and making good the

surface. All the joints and sections should be cut to length, welded and grinded

wherever necessary etc., complete as per specifications & drawing.

The work shall include the cost of all materials, cost of labour, including applying a

priming coat of red lead paint, HOM equipment and machinery, all lead and lift,

loading and unloading charges, transportation cost and conveyance of all materials, and

all other incidental charges at all floor levels etc., complete for successful completion

of work. The work shall be carried out as per the directions of the Engineer in charge.


b First Floor Sqm 45.00 2272.50 102262.50


d Third Floor Sqm 40.00 2318.40 92736.00




PRICED BOQ

Item


18 Providing, fabricating and erecting in position MS Working platforms and rungs,

Staircase Railings, Steel Frame work of required size for supporting of -

polycarbonate sheet roofing over cutouts , using MS angle, tees and MS flats and

other sections including cutting, welding,grinding, hoisting, fixing in position, using

bolts nuts as necessary, applying a priming coat of red lead paint all as per drawings

and specification at all floor levels, including cost of materials, labour, HOM of

equipments and machineries with all leads and lifts loading and unloading charges,

transportation cost and conveyance of all materials, &all other incidental charges for

successful completion of work.all as per detailed drawings & specifications and as

directed by Engineer-in-Charge.

Kgs 15000.00 72.00 1080000.00

19 Providing and fixing in position mild Steel Insert Plates of 4mm thick for fixing

Grills/Handrails/MS Frames gratings etc. of required size welded to steel

reinforcement bars of RCC members including applying a priming coat of red lead

paint, cost of materials, labour, HOM of equipments and machineries all leads and lifts,

loading and loading, transportation cost and conveyance of all material & all other

incidental charges at all floor levels complete for successful completion of work all as

per specification and as directed by the Engineer-in-charge.

Kgs 300.00 72.00 21600.00

20 Providing and fixing 1mm thick MS Sheet STEEL DOOR with frame and diagonal

braces of size 40x 40x 6mm angle iron,using 30x6mm for digonal and central cross

pieces 3.15mm MS gusset plates at the junction and corners, with handles, stoppers and

locking arrangements etc., including applying a priming coat of red lead paint, cost of

materials, labour, HOM of machinery, with all leads and lifts, loading and unloading

charges , transportation cost and conveyance of all other materials, incidental charges

at all floor levels etc complete for successful completion of work as per specifications

and as directed by the Engineer-in-charge.

Sqm 8.00 1980.00 15840.00




PRICED BOQ

Item


21 Providing and fixing M S Gate as per Drawing,using 50x50 mm 14 gauge M.S.

hollow pipe frame work as shown in the drawing and 35x6 mm and 16 mm Square

rods for verticals alternatively spaced at 4 cms c/c in two halves and 40 mmx6 mm

M.S.flats for horizontal member as shown in the drawing etc. complete . All the steel

surface should be thoroughly cleaned free of rust and painted with anti corrosive paint

(shop paint) etc., complete. The work includes cost of all materials, labour charges for

all items of work, hire charges for welding, cutting and grinding equipment, and

electricity charges, HOM of equipments and machineries, with all lead and lifts,

loading and unloading charges, transportation cost and conveyanceof all other

materials, other incidental charges complete, necessary for successful completion of

work as per specifications and as directed by the Engineer in charge.

Sqm 4.00 2250.00 9000.00

22 Providing and fixing MS LOUVER DOOR with frame of size 40x 40x 6mm angle

iron and 40x5mm Flat welded to shutter frame to inclination as per drawing etc.,

including angle door frame fabricated using 40x40x6 mm I.S.A fixed to wall with

hinges & applying a priming coat of red lead paint, cost of materials, labour, HOM of

machinery, with all leads and lifts, loading and unloading charges , transportation cost

and conveyance of all materials, other incidental charges at all floor levels etc complete

for successful completion of work as per detailed drawings & specifications and as

directed by the Engineer-in-charge.

Kgs 13000.00 72.00 936000.00




PRICED BOQ

Item


23 Providing and fixing anodized aluminium casement windows, top hung ventilators,

combination of fixed glazing fully openable windows for Kitchen, Toilet etc using

Z sections of 33mm, web thickness 4mm, weight 0.663kg/m: central mullion section

59x33mm with web thickness3mm,weight 1.123kg/m:The shutters on aluminium

hinges with approved quality of fixtures such as aluminium tower bolts,handles,stays

etc.,providing and fixing 5.5mm thick plain glass/pinheaded glass for shutters fitted

with glazing clips 19mmx17.3mmx11mm and 0.9mm thick and rubber beading,

aluminium sections anodised 12 to 15 microns, including cutting to required length,

joints mitred subdividing the frame tenonned and rivetted in the assembled frame

stiffened with end clips at corners angles and fixed to wall, lintel beam, floor, cill, as

the case may be with necessary screws, rawl plug, cutting masonary or concrete and

making good

the original surface; aluminium surface pre treated for removal of any rust and coated

with greasy materials for non -adherence of mortar or any other sticky materials;(

coating removal after installation) and thoroughly cleaned free from dirt, rust etc.,

including cost and conveyance of all materials, labour, HOM of equipments and

machineries all leads and lifts, loading and loading, transportation at all floor levels

complete for successful completion of work all as per specification and as directed by

the Engineer-in-charge.


b First Floor Sqm 140.00 3744.00 524160.00


d Third Floor Sqm 120.00 3749.40 449928.00

e Terrace Floor Sqm 5.00 3752.10 18760.50




PRICED BOQ

Item


24 Providing and fixing in position anodized aluminium windows and ventilators as per

approved drawings with sliding shutters using THREE TRACK WINDOW frame of

size 92x31.75mm bottom section 1.3mm thick, weight 1.07kg/m; sides and top sections

1.3mm, thick, weight 0.933kg/m, shutter frame section comprising top and bottom

section of size 40mmx18mm, wall thickness 1.25mm. weight 0.417kg/m, shutter side

outer 40mmx18mm. wall thickness 1.25mm. weight 0.417 kg/m. shutter interlock

section 40mmx26.7mm wall thickness 1.1mm. thick, weight 0.469 kg/m, the shutters

mounted on nylon rollers with approved quality of fixtures such as aluminium handles

tower bolts etc., providing and fixing 5.5mm. thick plain glass for shutters fitted with

rubber beading all aluminium sections anodised 12 to 15 microns thick including

cutting to required length,

joints mitred subdividing the frame tennoned and rivetted, in the assembled frame,

stiffened with end clips for corners, angles etc., fixed to the walls, lintels, floor beams;

cills as the case may be with necessary steel screws, raul plugs or teak wood gatties

including cutting masonary or concrete and making good the original surface using

cement mortar, ; aluminium sections pretreated for removal of any rust and coated with

greasy materials for non -adherence of mortar or any other sticky materials; ( coating

removal after installation) and thoroughly cleaned free from dirt, rust etc. etc.,

including cost of materials, labour, HOM of equipments and machineries all leads and

lifts, loading and loading, transportation cost and conveyance of all materials at all

floor levels complete for successful completion of work and as per specification and as



b First Floor Sqm 4.00 3312.00 13248.00


d Third Floor Sqm 4.00 3317.40 13269.60





PRICED BOQ

Item


25 Providing and fixing Anodized Aluminium Fully Fixed Glazing using Z sections of

33mm, web thickness 3mm,weight 0.663kg/m: central mullionsection 59x33mm with

web thickness3mm,weight 1.123kg/m including providing and fixing 5.5mm thick plain

glass fitted with glazing clips 19mmx17.3mmx11mm and 0.9mm thick and rubber

beading, aluminium sections anodised 12 to 15 microns, including cutting to required

length, joints mitred subdividing the frame tenonned and rivetted in the assembled

frame stiffened with end clips at corners angles etc., and fixed to the walls, lintels,

floor beams/cills as the case may be with necessary steel screws, raul plugs, or

teak wood gatties including cutting masonry or concrete and making good the original

surface using cement mortar, as per drawings and aluminium sections pretreated for

removal of any rust and protection of further rust formation and coated with the greasy

materials for non-adhesion of mortar and any other sticky matyerials, (this coating

should be cleaned after installation) including cost of all materials, fixtures, labour and

HOM of machinery complete for successful completion of work as per

specifications.including all leads and lifts , loading unloading charges and

transportation cost and conveyance of all materials and all other incidental charges etc

complete for successful completion of work as directed by the Engineer -in - charge.

(For Staircase, etc.)


b First Floor Sqm 12.00 4120.20 49442.40


d Third Floor Sqm 16.00 4124.70 65995.20





PRICED BOQ

Item


26 Providing and fixing in position Aluminium Sub Frame of size 60mm x 19.4mm and

1.3mm thick at 0.411kg/m to the required shape and size for fixing aluminium

windows/ventilators fixed to the openings with necessary teak wood plugs and screws

etc., complete including cost of materials, labour, HOM of equipments and

machineries all leads and lifts, loading and loading, transportation cost and conveyance

of all materials at all floor levels complete for successful completion of work all as

per specification and as directed by the Engineer-in-charge.

metre 1000.00 159.30 159300.00

27 Providing , fabricating assembling and fixing in position anodized aluminium

partitions using sections in combination of plain, single grove and double grove as per

requirements for the frames of over all size 101.6mm x44.45mm, 3.18mm thick having

section weight, plain sections2.4kg/m, single grove section2.54kg/m and double grove

section 2.683kg/m aluminium louvres of size 77.6mm x27.6mm 1.7mm thick section

weight 0.483 kg/m, bottom portions provided with 12mm thick prelaminated sheet both

side approved colour lamination exterior grade, aluminium section of matt finish or

glossy finish using section, spacing of vertical members shall not exceed 0.6m c/c ,

sections are cut to the required length , joints mitred and corners grinded subdividing

frames tennoned and rivetted to the frames, the assembled frame should be stiffened

with corner angles stripped and fixed with screws, rawl plugs and teak wood gutties to

RCC columns or masonry on sides ,

Sqm 300.00 4093.20 1227960.00




PRICED BOQ

Item


RCC lintels, or beams at top , floor at bottom , including cutting,chistling and making

good with cement mortar to match the surface,providing and fixing bottom panel

filled with the material to a height of 0.9m frm floor level and 5.5 mm thick plain

glass for middle portion viz.0.9m to 2.13m and top panel with lower sections , the

glass and panels fitted with glazing clips og 19mmx 17.3mm with thickness of 0.9mm,

weight 0.124kg/m aluminium sections anodised 12 to 15micron , sections pretreated

for removal of any rust and prevention of further rust formation,and coated with greasy

materials for not adherence of mortars or any other sticky materials , vertical members

embedded in flooring by making suitable size holes and fixing with cement mortar

with necessary opening for fixing of doors of standard size (excluding cost of door

opening). All the frame should

be thoroughly cleaned, free form rust, scale or dirt etc., complete including cost of

materials, labour, HOM of equipments and machineries all leads and lifts, loading and

unloading, transportation cost and conveyance at all floor levels complete for

successful completion of work all as per specification and as directed by the Engineer-

in-charge.

28 Providing, fabricating, assembling and fixing in position anodized aluminium doors

using following aluminium mat finish or glossy finish, outer frame plain section

101.6x44.45mm thickness 3.18mm, section weight 2.404kg/m, door shutters vertical

section 44.62x44.45mm thickness 3.18mm, section weight 1.505kg/m, top section

47.62x44.45mm thickness 3.00mm, section weight 1.426 kg/m bottom section

114.3x44.45 thickness 3.18mm, section weight 2.646 kg/m, door central section

19.91x44.45mm thickness 3.00mm, section weight 1.495 kg/m glazing clips

19x17.3x11mm thickness 0.9mm section weight 0.124kg/m; aluminium sections

anodized 12 to 15 microns cut length joint metred corners grinded, the shutters pivoted

opening arrangement with heavy duty aluminium alloy automatic door closures floor

mounted,

Sqm 30.00 4500.00 135000.00




PRICED BOQ

Item


providing and fixing standard approved accessories, such as aluminium handle for full

width or length, tower bolts, locks pivots: P.V.C. or rubber gasket with 5.5mm. thick

plain glass for top and bottom panel; aluminium sections treated for removal of any rust

and prevention of any further rust formation, and coated of greasy materials for non-

adherance of mortars or any other sticky materials; the assembled frame fitted with

corner angles, strips and fitted with screws, rawl plugs or teak wood gutties to R.C.C.

columns or masonry on sides. beams and flooring in bottom . including cutting,

chistling and making good with cement mortar to match the surface; all the frames

throughly cleaned free from rust, scale, or dirt etc., complete including cost of

materials, labour, HOM of equipments and machineries all leads and lifts, loading and

loading, transportation cost and conveyance of all materials at all floor levels complete

for successful completion of work all as per specification and as directed by the

Engineer-in-charge.

29 Extra for colour anodising the aluminium sections/profiles to a thickness of 12 to

15 micron thick complete including cost of materials, labour, HOM of equipments and

machineries all leads and lifts, loading and loading, transportation cost and conveyance

of all materials at all floor levels complete for successful completion of work all as

per specification and as directed by the Engineer-in-charge. (only external anodised

area shall be measured & paid)

Sqm 1100.00 135.00 148500.00

WOOD WORK

NOTE: Cost of fixtures to doors,cupboards&other wood work is excluded. Rate

quoted shall be inclusive of labour and other fixing charges of fixtures.




PRICED BOQ

Item


30 Providing TEAK WOOD Class-II frames of doors and other frames, wrought, framed

or assembled including making plaster groves (excluding cost cement concrete and side

clamps) but including cost of all materials, labour, HOM of machineries and

equipments as per drawing & specifications with all leads & lifts, loading, unloading

charges and transportation cost and conveyanceof all materials and all other incidental

charges etc., complete for successful completion of work as directed by the Engineer-in-

charge.

cum 6.00 135080.10 810480.60

31 Fixing of door frame in an existing opening including embedding frame in floor and

walls/columns after cutting masonry for holdfasts for embedding holdfasts in cement

concrete 1:2:4 of 20mm and down size granite metal or fixing frame to R.C. C

columns using suitable locking arrangement, painting two coats of Japan Paint to

sides of frame, making good the damages to walls and floors as required and disposal

of debris including cost and conveyance of all materials, labour, HOM of machineries

and equipments as per drawing & specifications with all leads & lifts, loading,

unloading charges and transportation cost and conveyance of all material and all other

incidental charges etc., complete for successful completion of work as directed by the

Engineer-in-charge.

a Ground Floor Each 30.00 756.90 22707.00

b First Floor Each 25.00 759.60 18990.00

c Second Floor Each 20.00 762.30 15246.00

d Third Floor Each 15.00 765.00 11475.00




PRICED BOQ

Item


32 Providing and fixing in position TEAKWOOD Class II shutter styles divided into

squares for glazing with top and side styles of size 100x 40mm, middle and bottom rail

of size 200x 40mm & sash bars of size 75 x 40mm divided panels filled with 10mm

thick float glass with bevelled edge of 6mm fixed with 15x15mm teak wood beading

including cost of all materials, labour charges, equipments and machineries,with all

leads and lifts, Loading and unloading charges, transportation cost and conveyance of

all materials & all other incidental charges etc., complete for successful completion of

work as per the specifications & drawing as directed by the Engineer in Charge. At all

floor levels.

Sqm 30.00 6210.00 186300.00

33 Providing and fixing 35 mm thick single/ double leaf solid core and resin bound

FLUSH DOOR SHUTTERS, confirming to IS . 1659 - 1960 and 2202 part I - 1962

as modified unto date BOTH SIDE TEAK veneering factory pressed teakwood

lipping as per specification & design around the shutters and fixed to existing frame

and as specified including cost of all materials, HOM of machineries and equipments,

with all leads and lifts, loading and unloading charges , transportation cost and

conveyance of all materials, labour for fixing the fixtures etc., complete for successful

completion of work as per specifications ( excluding cost of fixtures) at all floor levels

and as directed by the Engineer-in-Charge.

Sqm 150.00 3780.00 567000.00




PRICED BOQ

Item


34 Providing and fixing 35 mm thick single/ double leaf solid core and resin bound

FLUSH DOOR SHUTTERS, confirming to IS . 1659 - 1960 and 2202 part I - 1962

as modified unto date ONE SIDE TEAK veneering factory pressed teakwood lipping

as per design & specification around the shutters and fixed to existing frame as

specified including cost of all materials, HOM of machineries and equipments, with all

leads and lifts, loading and unloading charges , transportation cost and conveyance of

all materials , labour for fixing the fixtures etc., complete for successful completion of

work as per specifications ( excluding cost of fixtures) at all floor levels and as directed

by the Engineer-in-Charge.

Sqm 30.00 2983.50 89505.00

35 Providing and fixing 35 mm thick single/double leaf flush door shutters, confirming

to IS . 1659 - 1960 and 2202 part I - 1962 as modified unto date for non-decorative

type, core of block board construction to frame of IInd class teak wood and well

matched commercial 3 ply veneering with vertical grains or cross bands and face

veneers on both faces(BSC) of shutters: including teak wood lipping, including cost of

all materials, HOM of machineries and equipments, with all leads and lifts, loading and

unloading charges , transportation cost and conveyance of all materials, labour for

fixing the fixtures etc., complete for successful completion of work as per

specifications ( excluding cost of fixtures) at all floor levels and as directed by the

Engineer-in-Charge.

Sqm 75.00 2326.50 174487.50

36 Extra for Providing and fixing Vision Panel using 5 mm thick plain glass including

making cutouts in the flush door and fixing in position with teakwood beading alround,

including cost of all materials, HOM of machineries and equipments, with all leads and

lifts, loading and unloading charges , transportation cost and conveyance of all

materials , complete for successful completion of work as per specifications at all floor

levels and as directed by the Engineer-in-Charge.

Sqm 10.00 2250.00 22500.00




PRICED BOQ

Item


37 Providing and fixing best quality Decorative laminated sheet 1.00mm thick, matt

finish, of approved make and shade, conforming to IS code, fixing to flush shutter etc.,

using adhesive Fevicol-SH or equivalent including cost of all materials, labour, HOM

of machineries and equipments, with all leads and lifts, loading and unloading charges,

transportation cost and conveyance, etc, complete for successful completion of work at

all floor levels all as per specification and as directed by Engineer-in-Charge.

Sqm 40.00 485.10 19404.00

38 Providing and fixing TEAK WOOD Class-II STAIRCASE HANDRAIL of size

100x 65mm as per design and detailings as shown in the drawings,assembled

including making grooves for fixing and including ss screwsof approved size,cost of

all materials, HOM of machineries and equipments, with all leads and lifts, loading and

unloading charges , transportation cost and conveyance of all materials, labour for

fixing the fixtures etc., complete for successful completion of work as per

specifications at all floor levels and as directed by the Engineer-in-Charge.

Rmt 300.00 1030.50 309150.00

39 Providing and fixing non-metallic 55mm thick solid core bonded board type Two

hour rated fire and smoke check flush door shutters with non combustible boards in

side , the core hot pressed bonded with liquid phenol formaldehyde resin , external

lipping by teak wood ,heat activated intumescent on the edges of the shutter and door

frame of seasoned hard wood (Sal wood) of 100x60mm with heat activated

intumescent fire seal strips of size 12x4 mm (for smoke sealing ) fixed on all the three

sides except the bottom and the vision panel of size 200 x 400mm made up of

required thickness clear wired fire rated glass (imported) of 120 minutes fire rating

from Saint Gobain/CGI having electrically welded chemically treated steel wire mesh

of 20mm spacing sandwiched in the center during the continuos rolling process

including fire rated gasket channel & moulding/beading and filling the

Sqm 25.00 10800.00 270000.00




PRICED BOQ

Item


gap between moulding /beading and glass withsuitable sealant suitable for 120 minutes

fire resistant shutters including 125mm medium duty hinges with necessary stainless

steel screws and one coat of anti termite fire retardant primer- "Kutty" or equivalent

.The shutter shall be conforming to BS:476 Part 22/ IS:3614Part II as per prototype

tested including cost of all materials, labour charges, equipments and machineries,with

all leads and lifts, Loading and unloading charges, transportation cost and conveyance

of all materials & cost of all fixtures, etc., complete for successful completion of work

as per the specifications and as directed by the Engineer in Charge. At all floor levels.

WATER PROOFING

40 Providing and laying intergral cement based waterproofing treatment including

preparation of surface as required for treatment of Roofs, Balconies, Terraces etc.,

consisting of following application:

Sqm 1300.00 612.90 796770.00

a Applying and grouting slurry coat of neat cement using 2.75 kgs/sqm of cement

admixed with proprietory water proofing compound conforming to IS 2645 over the

RCC slab after cleaning the surface before treatment.

b conforming to IS 2645 over 20mm thick layer &CM 1:5 admixed with proprietary

water proofing compound to required slope and treating similarly the adjoining walls

upto 300mm height including rounding off junctions of walls and slabs.

c After two days of proper curing, applying a second coat of cement slurry admixed with

proprietary water proofing compound

d Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 admixed

with proprietary water proofing compound and finally finishing the surface with trowl

and neat cement slurry and making of 300x300mm square.




PRICED BOQ

Item


e The whole terrace so finished shall be flooded with water for a minimum period of two

weeks for curing and for final test including cost of all materials, labour charges,

equipments and machineries, with all leads and lifts, loading and unloading charges,

transportation cost and conveyance of all materials etc, all other incidental charges

etc., complete for successful completion of work as per the specifications as directed by

the Engineer in Charge.

41 Providing and laying in position yelahanka tiles of size 125x250mm of approved

quality and make, over a bed of cement mortar 1:3 an average thickness 25mm over

weather proof course and pointed with cement mortar 1:3 mix with red oxide including

cost of all materials, HOM of machineries and equipments, with all leads and lifts,

loading and unloading charges , transportation cost and conveyance of all materials,

labour for fixing the fixtures etc., complete for successful completion of work as per

specifications at all floor levels and as directed by the Engineer-in-Charge.

Note: This item shall be executed with in 7 days after flooding period is completed as

per previous item.

Sqm 1300.00 540.00 702000.00

42 Chipping and cleaning, construction joint and slab joint, treatment, grouting of honey

comb by cement with inorganic accelerator for cement, spray of biological modified

ortho esters and alkaline earth, providing and laying of patch concrete 1:2:4 for

required thickness by clean granite trap jelly 20mm and down size mixed with

polycarboxylic sulphonated neutral cellulose at 100ml / bag and aqueous acrylic

silicone emulsion at 125ml/ bag providing plaster for a thickness of 20mm mixed

with polycarboxylic sulphonated neutral cellulose at 100ml/bag and aqueous acrylic

silicone emulsion at 125ml/ bag, slurry of cement and silica sand should be mixed with

cross linked acrylic/ styrene/ butadiene based, polymer, spraying of silane and silanol

linear copolymer as water proof

Sqm 300.00 875.70 262710.00




PRICED BOQ

Item


agent, applying of modified polymers slurry of soft acrylic esters for extra protection

for tanking, and filling the bore wherever necessary with concrete, brushing one coat of

acrylic copolymer cross linked formulation on the bore for, SUNKEN TOILETS,

OHT & SUMP TANK etc., including cost of all required materials,all leads & lifts,

loading and unloading charges, transportation cost and conveyance of all materials,

HOM of machineries and equipment and all other incidental charges at all floor levels

etc complete for successful completion of work as directed by the Engineer-in-charge.

NOTE: LEAK Test to be carried out before starting and after completion of Water

Proofing work and certified by Engineer-in-charge.

43 Providing and laying CINDER CONCRETE in cement 1:15 (1 cement:15 cinder of

12.5mm nominal size) on terraced roof or sunken slabs, laid to slope, compacting,

including cost of all materials, labour, curing as per drawing & specifications,

including all leads & lifts, loading, unloading charges, transportation cost and

conveyance of all materials, HOM of machinaries and equipments and all other

incidental charges at all floor levels etc., complete for successful completion of work as


Cum 400.00 1420.20 568080.00

44 providing and laying in position PVC 40 mm perforated pipe in cinder concrete as

per detail drawings and specification including the cost of all materials, cost of labour

HOM of equipment and machinery all lead and lift, loading and unloading charges,

transportation cost and conveyance of all materials, and all other incidental charges at

all floor levels etc complete for successful completion of work and as directed by the

engineer -in -charge .

metre 140.00 211.50 29610.00




PRICED BOQ

Item


45 Providing and making khurras of size 450 mm x 450 mm specified below with 12 mm

thick C.M 1:3 plaster finish over PCC 1:2:4 using 12mm nominal size stone aggregate

of 450mm x 450mm of varying thickness of 40mm at wpc side to 30 mm at pipe end

laid to slope laid over PVC sheet of 1000 x 1000 mm x 400 micron laid over top of slab

after cleaning the surface of concrete slab. The top surface of CM 1:3 plaster shall be

finished smooth with cement punning, rounding of edges etc., complete including cost

and conveyance of all materials, labour, curing, as per drawing & specifications,

including all leads & lifts, loading, unloading charges, transportation , HOM of

machinaries and equipments and all other incidental charges at all floor levels etc.,

complete for successful completion of work as directed by the Engineer-in-charge.

Each 25.00 168.30 4207.50

FLOORING

46 Providing and laying heavy duty cobble stones 80mm thick interlock pavers, using

cement and course sand for manufacture of blocks of approved size, shape and colour

with a minimum compressive strength of 281 kg per sqm over 50mm thick sand bed

(average thickness) and compacting with plate vibrator having 3 tons compaction force

thereby forcing part of sand underneath to come up in between joints, final compaction

of paver surface joints into its final level , including cost of all materials, HOM of

machineries and equipments, with all leads and lifts, loading and unloading charges ,

transportation cost and conveyance of all materials, labour for fixing the fixtures etc.,

complete for successful completion of work as per specifications at all floor levels and

as directed by the Engineer-in-Charge.

Sqm 250.00 795.60 198900.00




PRICED BOQ

Item


47 Providing and laying CHEMICAL RESISTANT VITRIFIED TILES ( AS per IS

4457 of 2007 ) of size 600x 600mm and 12 mm thick of approved make, shade and

size for FLOORING and SKIRTING of 100mm high laid on bed of 12mm thick

cement mortar 1:3 mix, using PVC tile spacer, flush pointing with white cement using

colour pigment, protecting the tiles with POP untill completion and handing over and

cleanig subsequently before handing over, including cost of all materials, labour,

curing, complete HOM of equipments and machineries, all leads and lift, loading and

unloading charges, transportation cost and conveyance of all materials, and all other

incidental charges at all floor levels etc., complete for successful completion of work as

per drawings & specifications and as directed by the Engineer-in-charge.


b First Floor Sqm 500.00 1030.50 515250.00


d Third Floor Sqm 500.00 1030.50 515250.00

48 Providing and laying VITRIFIED TILES of size 600x 600mm and 12mm thick of

approved make, shade and size for FLOORING and SKIRTING of 100mm high laid

on bed of 12mm thick cement mortar 1:3 mix, using PVC tile spacer, flush pointing

with white cement using colour pigment, protecting the laid tiles with POP untill

completion and handing over andcleaning subsequently before handing over, including

cost of all materials, labour, curing, complete HOM of equipments and machineries,

all leads and lift, loading and unloading charges, transportation cost and conveyance of

all matterials & and all other incidental charges at all floor levels etc., complete for

successful completion of work as per drawings & specifications and as directed by the

Engineer-in-charge.


b First Floor Sqm 300.00 1030.50 309150.00





PRICED BOQ

Item


d Third Floor Sqm 150.00 1030.50 154575.00

49 Providing Anti skid CERAMIC TILES in flooring of size 30 x 30 cm of approved

make, shade and texture in Bath Room, Balcony, etc. and on a bed of 12mm thick,

cement mortar 1:3 mix, flush pointing with white cement using colour

pigment,protecting the laid tiles with POP untill completion and handing over and

cleaning subsequently before handing over, including cost and conveyance of all

materials, including cost and conveyance of all materials, labour, curing, complete as

per drawings & specification, HOM of equipments and machineries, all leads and lifts,

loading and unloading charges, transportation cost and conveyance of all materials&

and all other incidental charges etc., complete for successful completion of work and

as directed by Engineer-in-charge.


b First Floor Sqm 20.00 817.20 16344.00


d Third Floor Sqm 20.00 817.20 16344.00

50 Providing skirting, dado, with COLOUR GLAZED TILES of size 300 x 600mm and

6mm thick with border of size 300 x 100 mm on 10mm thick cement plaster 1:3 and

jointed with white cement, slurry over rough plaster surface (excluding cost of rough

plastered surface which should be measured and paid separately) using glazed tiles of

approved make, size, color & design including cost of all materials, labour, curing,

complete as per drawings & specification,, complete for successful completion of work

as per specifications. including HOM of equipments and machineries, all leads and

lifts, loading and unloading charges, transportation cost and conveyance of all

materials, and all other incidental charges curing etc., complete for successful

completion of work and as directed by the Engineer-in-charge.


b First Floor Sqm 100.00 1030.50 103050.00




PRICED BOQ

Item



d Third Floor Sqm 100.00 1030.50 103050.00

51 Providing and laying FLOORING, LANDING and SKIRTING with 20 mm to 25

mm thick polished Kota stone slabs using Cement Mortar1:6, 25mm thick over

existing concrete bed or top of roof laid to line and level and jointed with cement slurry

mixed with pigment to match the shade of the slab, including cost of all materials,

labour, curing, polishing, all as per drawings & specifications, HOM of equipments and

machineries, all leads and lifts, loading and unloading charges, transportation cost and

conveyance of all material and all other incidental charges etc., complete for successful

completion of work and as directed by the Engineer-in-charge.At all floor levels.

I In flooring,


b First Floor Sqm 300.00 864.00 259200.00


d Third Floor Sqm 200.00 864.00 172800.00

II Providing and laying SKIRTING with 20 mm to 25 mm thick polished Kota stone

slabs using Cement Mortar1:6, 25mm thick over existing concrete bed or top of roof

laid to line and level and jointed with cement slurry mixed with pigment to match the

shade of the slab, including cost of all materials, labour, curing, polishing, all as per

drawings & specifications, HOM of equipments and machineries, all leads and lifts,

loading and unloading charges, transportation cost and conveyance of all material and

all other incidental charges etc., complete for successful completion of work and as

directed by the Engineer-in-charge.At all floor levels. In skirting 100mm high


b First Floor Sqm 20.00 864.00 17280.00


d Third Floor Sqm 15.00 864.00 12960.00




PRICED BOQ

Item


III Providing and laying FLOORING, LANDING and SKIRTING with 20 mm to 25

mm thick polished Kota stone slabs using Cement Mortar1:6, 25mm thick over

existing concrete bed or top of roof laid to line and level and jointed with cement slurry

mixed with pigment to match the shade of the slab, including cost of all materials,



conveyance of all material and all other incidental charges etc., complete for successful

completion of work and as directed by the Engineer-in-charge.At all floor levels.

In Staircase treads, risers of steps not exceeding 300mm in width, to be laid in

single slab at all floor levels

Sqm 200.00 864.00 172800.00

52 Providing and laying FLOORING using combination of pre-polished 19 mm thick

water cut/ gang saw Black Granite and border allround with Pre-polished red

Granite ( as per architectural pattern shown on drawing ) over cement mortar 1:4

average 20mm thick layer on existing cement concrete bed pointed with white cement/

colour pigment, including cost of all materials, labour, curing, complete HOM of

equipments and machineries, all leads and lift, loading and unloading charges,


all floor levels etc., complete for successful completion of work as per drawings &



b First Floor Sqm 25.00 2745.90 68647.50


d Third Floor Sqm 25.00 2745.90 68647.50




PRICED BOQ

Item


53 Providing and laying Skirting 100 mm high using pre-polished 19mm thick water cut/

gang saw Black Granite over cement mortar 1:4 average 20mm thick layer on

existing cement concrete bed pointed with white cement/ colour pigment, including

cost of all materials, labour, curing, all as per drawings & specifications, HOM of

equipmens and machineries, all leads and lifts, loading and unloading charges,


all floor levels etc., complete for successful completion of work and as directed by

Engineer-in-charge.

I In skirting 100mm high


b First Floor Sqm 30.00 1884.60 56538.00


d Third Floor Sqm 25.00 1884.60 47115.00

II Providing and laying 100 mm high using pre-polished 19mm thick water cut/ gang

saw Black Granite over cement mortar 1:4 average 20mm thick layer on existing

cement concrete bed pointed with white cement/ colour pigment, includingcost of all

materials, labour, curing, all as per drawings & specifications, HOM of equipmens and


conveyance of all materials, and all other incidental charges at all floor levels etc.,

complete for successful completion of work and as directed by Engineer-in-charge.

In BORDER of corridor flooring and Staircase and Band Above Corridor Cladding


b First Floor Sqm 120.00 1884.60 226152.00


d Third Floor Sqm 120.00 1884.60 226152.00





PRICED BOQ

Item


54 Providing and fixing of wall cladding using 20mm thick gang saw water cut BLACK

GRANITE with Aluminium Spacer CM 1:3 proportion cut to required shape,pattern

with paper joints,finished with cement mortar using white cement and colour pigments

to match the colour of the slab making through jointing with sealant,making holes

25mmx12mm grooves in joints including curing etc complete. including cost of all

materials, labour, curing, complete HOM of equipments and machineries, all leads and

lift, loading and unloading charges, transportation cost and conveyance of all materials

, and all other incidental charges at all floor levels etc., complete for successful

completion of work as per drawings & specifications and as directed by the Engineer-

in-charge. (In lift lobby)


b First Floor Sqm 15.00 3028.50 45427.50


d Third Floor Sqm 15.00 3031.20 45468.00

55 Providing and laying flooring 40mm thick, with an underlayer of 30mm thick

cement M15 concrete using broken granite metal of 12mm nominal size and top

layer of 10mm thick plaster with cement mortar 1:3, finished with floating coat of

neat cement including cost of all materials, labour, curing, complete HOM of




specifications and as directed by the Engineer-in-charge. ( in 250 Seater Auditorium.-

second floor )

Sqm 175.00 360.00 63000.00




PRICED BOQ

Item


56 Providing and fixing in position PVC corner trims for dado in corner tiles in toilets

set in CM 1:3 using similar colour trim matching to tiles using similar colour pigment

etc., complete including cost of all materials, labour, curing, complete HOM of





metre 100.00 45.90 4590.00

57 Providing and laying THRESHOLD with 20mm to 25 mm thick polished Kota stone

slabs using TILE ADHESIVE of approved make over existing concrete bed laid to

line and level and mixed with pigment to match the shade of the slab, after cleaning

the surface of dust&other free particles ,grease,oil,etc,including cost of all materials,



conveyance of all materials and all other incidental charges etc., complete for

successful completion of work and as directed by the Engineer-in-charge.At all floor

levels.

Sqm 50.00 1192.50 59625.00

58 Providing and fixing of wall cladding using 20 mm thick gang saw water cut grey

granite in C.M 1:3 proportion cut to required shape, pattern with paper joints, finished

with cement mortar using white cement and colour pigments to match the colour of

slab making through jointing with sealent, making holes 25 mm x 12 mm grooves in

joints including curing etc., complete. including cost of all materials, labour, curing,

complete HOM of equipments and machineries, all leads and lift, loading and

unloading charges, transportation cost and conveyance of all materials, of all materials

and all other incidental charges at all floor levels etc., complete for successful

completion of work as per drawings & specifications and as directed by the Engineer-

in-charge.

( in corrdor )

Sqm 1100.00 2429.10 2672010.00




PRICED BOQ

Item


59 Providing and laying/fixing cement base, precast, Pre-polished CEMENT

CONCRETE, designer tiles 25mm thick of approved colour, shade, pattern as shown

in the drawing, conforming to IS 1237 heavy duty approved tiles for Courtyard,

Portico, Ramp, Terrace areas laid over a bed of 12mm thick cement mortar 1:3 finished

with flush pointing using white cement, mixed with matching pigment and finishing to

required level, including cost of all materials, including cutting , grinding the edge to

half/full round wherever required, labour, curing complete, HOM of equipments &

machineries,cost&Conveyance of all materials & all other incidental charges at all

floor levels all as per drawing & specification and as directed by Engineer-in-Charge.

Sqm 120.00 901.80 108216.00

60 Providing and laying FLOORING using pre-polished 19mm thick water cut/ gang saw

Black Granite using TILE ADHESIVE of approved make , pointed with white

cement/ colour pigment, includingcost of all materials, labour, curing, all as per

drawings & specifications, HOM of equipmens and machineries, all leads and lifts,

loading and unloading charges, transportation cost and conveyance of all materials, and


of work and as directed by Engineer-in-charge. ( In Corridor)

Sqm 5.00 2048.40 10242.00

FINISHING WORK

61 Providing 12mm thick cement plaster in single coat with cement mortar 1:3 to

CEILING to required line and level including rounding of corners wherever required

smooth providing and removing scaffolding, curing, cost of all materials, labour, HOM

of equipments and machineries, all leads and lifts, Loading and unloading charges,

transportation cost and conveyanceof all materials , all other incidental charges etc.,

complete for successful completion of work all as per specifications and as directed by



b First Floor Sqm 1400.00 146.70 205380.00





PRICED BOQ

Item


d Third Floor Sqm 1000.00 146.70 146700.00


62 Providing 15mm thick cement plaster in single coat with cement mortar 1:4 to LAB

DRAINS to required line& level including providing and mixing of water proofing

compound at one kg per bag or in the proportion recommended by manufacturers

rounding of corners wherever required smoothrendering providing and removing

scaffolding, including curing, cost of all materials, labour, HOM of equipments and

machineries, all leads and lifts, Loading and unloading charges, transportation cost and

conveyance of all materials, all other incidental charges etc., complete for successful

completion of work all as per specifications and as directed by the Engineer-in-charge.


b First Floor Sqm 200.00 135.00 27000.00


d Third Floor Sqm 200.00 135.00 27000.00


63 Providing 18 mm thick cement plaster in single coat with cement mortar 1:6 to block

masonry, concrete surfaces including providing and mixing crack proof liquid at

100 ml per bag or in the proportion recommended by the manufacturers including

rounding off corners wherever required smooth rendering, : Providing and removing

scaffolding, including cost of materials, labour, curing HOM of equipments and


conveyance of all materials, all other incidental charges etc,. complete for successful

completion of work all as per specifications and as directed by teh Engineer -in -

charge. ( internal wall surfaces )

Note: Edges of plastering shall be chamfered to 12mm wide.


b First Floor Sqm 1500.00 142.20 213300.00




PRICED BOQ

Item



d Third Floor Sqm 1500.00 142.20 213300.00


64 Providing ROUGH CEMENT PLASTERING 15mm thick in single coat with CM

1:4 to block/ concrete surfaces base of dadoing works with sand of approved quality,

providing & removing scaffolding including curing, cost and conveyance of all

materials, labour, HOM of equipments and machinereis, all leads and lifts, Loading

and unloading charges, transportation cost and conveyance of all materials, all other

incidental charges etc., complete for successful completion of work all as per



b First Floor Sqm 400.00 135.00 54000.00


d Third Floor Sqm 400.00 135.00 54000.00

65 Providing 18mm thick cement plaster in single coat with cement mortar 1:6 to block

masonry/ concrete surfaces including providing and mixing water proofing

compound at one Kg per bag or in the proportion recommended by the manufacturers

rounding off corners wherever required, rendering the surfaces as specified,

providing and removing scaffolding, including cost of all materials, labour, curing,

HOM of equipments and machineries, all leads and lifts, Loading and unloading

charges, transportation cost and conveyance of all material , all other incidental

chargesetc., complete for successful completion of work all as per specifications and as

directed by the Engineer-in-charge.( For external wall surfaces)

Sqm 3000.00 135.00 405000.00




PRICED BOQ

Item


66 Providing and fixing plaster mesh 150 mm wide manufactured out of hot dipped

galvanised iron of nominal thickness 0.35 mm with a zinc coatin of 120 gms per sq m

width,along route of walls chipped for services, junction between RCC and block

walls, over electrical conduits at all floor levels including cost of materials providing

and removing necessary scaffolding, labour for fixing, HOM of equipments and


conveyance of all materials , all other incidental charges at all floor levels etc.,


the Engineer-in-charge. ( length of mesh only to be measured for payment)

a Plaster mesh-150 mm wide metre 7000.00 29.70 207900.00

b Plaster mesh-200 mm wide metre 750.00 34.20 25650.00

67 Providing and fixing natural surface 50mm thick Magadi Pink stone for cladding

and coping , over solid block masonary or RCC walls over one coat of CM 1:6,

20mm thick rough coat plaster using necessary insert plates in concreting/dash screw

support MS angle, stainless steel clamps and 5.5mm rod ( Grade 304 ) and stone

20mm deep machine cut edge all-round and remaining width to be hammered to give

either paper joint or 12x10mm machine cut grooves, pointed with cement and matching

pigment, curing, drilling and Cleaning by Sand blasting after completing all other

works. providing and removing scaffolding where ever necessary complete all as per

detail drawings, The size of stone will be 1200mmx300mm,

Sqm 750.00 3154.50 2365875.00

600mm x 600mm etc. complete including the cost of all materials, labour, HOM of

machinery, with all leads and lifts, loading and unloading, transportation cost and

conveyance of all materials and all other incidental charges etc.at all floor levels etc.

complete for successful completion of work as per detail drawings and specifications

and as directed by the Engineer -in-charge.




PRICED BOQ

Item


68 Providing and fixing natural surface 50mm thick SIRA STONE for BAND AND

COPING in cladding, over solid block masonary or RCC walls over one coat of CM

1:6, 20mm thick rough coat plaster using necessary insert plates in concreting/dash

screw support MS angle, stainless steel clamps and 6mm rod ( Grade 304 ) and

stone 20mm deep machine cut edge all-round and remaining width to be hammered to

give either paper joint or 12x10mm machine cut grooves, pointed with cement and

matching pigment, curing, drilling and Cleaning by Sand blasting after completing

all other works, complete. The work shall be carried out as above and as per drawing.

The general size of stone will be 1200mmx150mm and any other size as per

Sqm 200.00 3116.70 623340.00

drawing, including curing and providing and removing the scaffolding wherever

necessary etc., complete including cost of materials, labour, HOM of equipments and


conveyance of all materials , all other incidental charges at all floor levels etc.,



SPECIAL ITEMS

69 Providing and fixing 19mm thick mirror polished, machine cut granite slab using

single piece Black Granite for Pantry platforms, Wash Basin counters, facias and

similar locations of required size of approved shade, colour and texture laid over 20mm

thick base cement mortar 1:6 (1 cement : 6 coarse sand) with joints treated with white

cement , mixed with matching pigment, epoxy touch ups, including rubbing, curing etc.

complete at all levels. including cost of materials, labour, curing, polishing complete as

per specifications., HOM of equipments and machineries, all leads and lifts, Loading

and unloading charges, transportation cost and conveyance of all materials, & all other

incidental charges at all floor levels etc., complete for successful completion of work

all as per specifications and as directed by the Engineer-in-charge.




PRICED BOQ

Item



b First Floor Sqm 125.00 1661.40 207675.00


d Third Floor Sqm 100.00 1664.10 166410.00

70 Extra for providing opening of required size & shape for wash basins/kitchen sink

in kitchen platform, vanity counters and similar location in marble/stone work

including necessary holes for pillar taps etc. including rubbing and polishing of cut

edges etc including cost of materials, labour, HOM of equipments and machineries, all


all materials & all other incidental charges at all floor levels etc., complete for

successful completion of work all as per specifications and as directed by the Engineer-

in-charge.

Each 50.00 558.00 27900.00

71 Providing FULL ROUND BULL NOSING to 20/40 mm thick granite slab edges

using required machinery etc., including polishing to edge to give high glossy finish,

including cost of materials, labour, HOM of equipments and machineries, all leads and

lifts, Loading and unloading charges, transportation cost and conveyance of all

materials & all other incidental charges at all floor levels etc., complete for successful


metre 1500.00 173.70 260550.00




PRICED BOQ

Item


72 Providing and fixing Grey Granite stone mirror polished on bothsides, edges rounded

and polished of size (950x750/450) deep and 19mm thick fixed in urinal partitions by

cutting a chase of appropriate width &depth as per specification with chase cutter and

embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction

of Engineer-in-charge and finished smooth including cost of materials, providing and

removing necessary supports,curing,labour, HOM of equipments and machineries, all


all materials, all other incidental charges at all floor levels etc., complete for successful


Sqm 5.00 2430.00 12150.00

73 Providing and fixing stainless steel wire gauze of average width of aperture 1.4mm

with wire of 0.63mm dia fixed to existing aluminium frames using aluminium clips for

mosquito proof shutters at all floor levels cutting to size and finishing sides,

including cost of materials, labour, HOM of equipements and machineries all leads and

lifts, Loading and unoading, transportatio,at all levels etc,. complete for successful


Sqm 150.00 936.00 140400.00

74 Providing and fixing 10mm thick compact POLYCARBONATE SHEET with

aluminium profiles, EPDM ruber gasket, G.E Silicon sealant, cold forged fastners all as

per drawing including cost of materials, labour, HOM of equipments and machineries,

all leads and lifts, Loading and unloading charges, transportation cost and conveyance

of all materials, all other incidental charges at all floor levels etc., complete for


charge.

NOTE: Rate is inclusive of aluminium work, sealant, gaskets, etc.

Sqm 150.00 4077.00 611550.00




PRICED BOQ

Item


75 Providing and laying flooring with burnt stone slabs 10cm thick for PLINTH

PROTECTION rough chistle dressed with machine cut edges allround on cement

mortar bed 1:6, 25 mm thick and pointed with cement mortar 1:3, including cost and

conveyance of all materials, labour,curing ,HOM of equipments and machineries, all

leads and lifts, Loading and unloading charges, transportation etc., complete for


charge.

Sqm 150.00 591.30 88695.00

76 Supply and installation of double skin metal roofing with top skin 0.5mm (TCT )

Galvalume sheet and bottom skin 0.4mm ( TCT ) galvalume sheet SANDWICH

PANELS with the core made of polyurethane 50 mm thick of approved make and

colour as per Drawing, including fixing the sandwich panel to hollow tubular truss with

required clamps, bolts, nuts and all other required accessories including cost of all

materials & fixtures, labour, HOM of equipments and machineries, all leads and lifts,

Loading and unloading charges, transportation cost and conveyanceof all materials ,


of work as per specifications and as directed by the Engineer-in-charge.

Sqm 150.00 1934.10 290115.00




PRICED BOQ

Item


77 Providing and fixing Colour Coated GALVALUME SHEET for Ridges , flashing,

cappings etc .The material shall be cold rolled steel,550Mpa yield stress ( ASTM

A446 Grade E ) With hot dipped metalic coating of aluminium Zink alloy (

150gms/sqm total of both sides, AZ 150 as per ASTM A792 or as per IS 1397),

0.5mm total coated thickness.The rate should be inclusive of laps, wastages,

preparation of shop drawings,scaffoldings,screws,fasteners etc complete. (Laps either

with same or with other roofing metal will not be considerd for payment). including

cost of materials&fixtures, labour, HOM of equipments and machineries, all leads and

lifts, Loading and unloading charges, transportation cost and conveyance of all

materials & all other incidental charges at all floor levels etc., complete for successful


Sqm 25.00 495.90 12397.50

78 Supplying and fabricating, hoisting and erecting in position of hollow tubular truss

using medium and heavy section of different diameters confirming to IS

1161(amended up to date) as indicated in drawings(in wind column, jack

trusses,canopies,lattice girder,trusses,sub trusses,monitor roof,braces ties cladding

posts,purlins connecting beams,of columns including anchor bolts,washer etc.)at all

level and height the steel tubes when analysed in accordence with the methord

specified in IS 226-1975 shall show not less than 0.06 percent of sulphur,and not more

than 0.06 percent of phosphors,tubes shall be cleaned ,finished and free from scale

cracks,surface flaws,laminations, and other defects.and shall be cut clean and square

with axis of tube, unless otherwise specified. The component part of structure shall be

assembled in such a manner that they are neither twisted nor otherwise damaged and be

so prepared that the specified chambers are maintained,All material before being

assembeled shall be straighetend, if necessary, unless required

Kgs 3000.00 94.50 283500.00




PRICED BOQ

Item


to be of curvilinear form and shall be free from twist. Washer shall be specially shaped

where necessary, or other means used to give nuts and the heads of bolts a satisfactory

bearing. For hoisting and erection proper equipements such as derricks, lifting

tackles,winches,& ropes shall be used. The tubular steel work shall be painted with one

coat of approved steel primer after fabrication but before erection. After erection the

entire steel tubular steel surface shall be painted with two coats synthetic enamel paint

of approved shade by sprayer and finished to matt finish. All fabrication and welding

shall be done by reputed fabricator. The profile cutting shall be employed for cutting

and fabrication of tubular section, The coated rate shall include the cost of all

materials,

labour, tools scaffolding tackles, crane device and plants as per specification and

drawing complete. The rate quotated to include cost of bolts, nuts, washer, clamps,

welding electrode, power charges connection required for work and all the incidental

charges also include.The rate is inclusive of HOM of machineries and equipements

shims and packing pieces, including cost of all materials, labour, HOM of equipments

and machineries, all leads and lifts, Loading and unloading charges, transportation cost

and conveyance of all materials, & all other incidental charges at all floor levels etc.,

complete for successful completion of work as per specifications , drawings as





PRICED BOQ

Item


79 Providing orange colour safety foot rest of minimum 6 mm thick plastic

encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having

minimum cross section as 23 mmx25mm and over all minimum length 263 mm and

width as 165mm with minimum 112 mm space between protruded legs having 2 mm

tread on top surface by ribbing or chequering besides necessary and adequate anchoring

projections on tail length on 138 mm as per standard drawing and suitable to with stand

the bend test and chemical resistance test as per specifications and having

manufacture's permanent identification mark to be visible even after fixing, including

fixing in manholes with 30x20x15 cm cement

Each

concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm

nominal size) complete, including cost of all materials & fixtures, labour, HOM of

equipments and machineries, all leads and lifts, Loading and unloading charges,

transportation cost and conveyance of all materials, all other incidental charges at all

floor levels etc., complete for successful completion of work as per specifications and

as directed by the Engineer-in-charge.




PRICED BOQ

Item


False ceiling Suspension system : False ceiling (Tiles, Panels) shall be suspended

with the frame work and accessories complete from roof slabs, beams etc., by means of

4mm dia galvanized rods, spring steel clips, hanger, Tee Runner, Ultra Look Tee

Runner and edge trim etc., The Suspension system consists of Grip bolt of size 50mm

in length and dia of 9.5mm with 16mm long treads for fixing 9.2mm dia Nut, the

thickness of the nut is 5.2mm, this is also fixed with washer of 18.50mm in dia and the

thickness of the washer is 0.80mm, this grip bolt is fixed on to the RCC slab, by

making holes with special hammering machine and with the help of nut and washer,

dip Galvanized Iron Rod of 4mm dia is rounded, then it is been twisted, so that it rests

above the washer and later on the nut is been tightened and the grip bolt expands inside

the RCC slab and holds the G.I.Rod 4mm thick straight, this G.I. supporting rod of

4mm thick is also twisted on the other side of fixed "J" bolt, this "J" bolt consists of

3mm thick

with a length of 133mm, this "J" bolt is later on twisted by 26mm, this "J" bolt has a

treaded portion of 47mm and this is provided with a nut of 3.63 mm thick and the dia of

the nut is 6.9mm, this nut has a washer and this washer has a dia of 19mm and the

thickness of 0.6mm and all this components are chromodised, later on G.l.supporting

rod of 4mm thick dia is twisted and fixed inside the nut and washer, then to maintain a

good, straight level of the false ceiling, the nut in "J" bolt is then moved up or down

for proper level. The Galvanized Iron 4 mm dia been cut to size of length required as

per site requirement then the wall at a prefect wall level and this pre-coated wall

channel are having two coats of primer and one coat of polyester paint of

desiredcolour, the wall channel will have a coat of primer applied on the rear side. This

wall channel are made of galvanized Iron and the grade of the galvanized Iron is as per

B18. This wall channel of 24mmx24mm is fixed on to




PRICED BOQ

Item


the wall side with the help of star screws, the star screws are having a length of 25mm

and a dia reducing basics of 3mm to tapered down. The main 'T" consists of size:

24mm width x 38mm height, this main "T" is been made of galvanized Iron sheet of

0.3mm thick, these are formed in the shape of a main"T" Bar on a fully automatic

advance computer machine, the galvanized iron sheet are later on capped with pre-

coated aluminium capping will have the colour, same as the panels colour or any other

colour of choice. The grade of Galvanized iron sheet in as per BI8 and the grade of

aluminium chapping is (AI-Mn) 3003 of H-46 to 48. The cross "T" bars are of 1200mm

in length and this "T"s are of size 24mmx38mm in height, another "T" bar consist

600mm in length and this "T"bar are of size 24mm width x 38mm in height, this "T"

bar is fixed on to the main "T" of 24mmx38mm height and crosstees of 24mmx38mm

height forms a pattern of 600mmx600mm grid and further this grid work is supported

by G.I.Rod of

4mm and height adjustable "J" bolts system. The "T" grid system consists of special

steel is as per B18, and the thickness of the steel is 0.3mm thick. This "T" frame work

is capped with coil coated aluminum sheet and the grade of the Aluminum sheet is (AI-

Mn) 3003 of H-46 to H-48




PRICED BOQ

Item


80 Mineral Fiber false ceiling

Providing and laying of world class mineral acoustic ceiling panels as per the

following specification:-Tile of approved make Mineral Acoustic ceiling panels of size

595x595mm-12mm thick suitable for use in arrears up to 40degree C and RH 70UR as

per manufacturer. Tile have 15 minutes fire retardant and does not contain

asbestos/urea formaldehyde, Technical details of New Modena are- Thermal

conductivity Non-disposable, Light Reflection 80% fire resistance Non-resistance Non-

disposable. Mineral fiber ceiling panels are placed inside the grid work. including cost

of materials, labour, providing&removing necessary scaffolding , HOM of equipments

and machineries, all leads and lifts, Loading and unloading charges, transportation cost

and conveyance of all materials, all other incidental charges at all floor levels etc.,

complete for successful completion of work as per specifications and as directed by


Sqm

81 Providing and fixing 50mm thick precast cement concrete Jali 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia

mild steel wire including centering and shuttering, roughening cleaning, fixing and

finishing in cement mortar 1:3 (1 cement: 3 fine sand) ,curing etc. on steel frame

complete excluding the cost of frame work, including cost of materials, labour,

providing & removing necessary Scaffolding HOM of equipments and machineries, all


all materials , all other incidental charges at all floor levels etc., complete for


charge.

Sqm 40.00 670.50 26820.00




PRICED BOQ

Item


82 Providing and fixing aluminium angle of 40x40x4mm for Floor divider between

Balcony/Toilet and room at all floor levels including all accessories and cost and

conveyance of all materials, labour, HOMof all materials of equipments and

machineries, all leads and lifts, loading and unloading charges, transportation etc.,



metre 15.00 270.90 4063.50

83 Providing and fixing Mirror polished black granite slab soap tray of size 230x230

mm and 19mm thick With available material cut from kitchen slab and Bathroom

basin slab.including cutting to required shape and size and rounding of exposed edges

at all floor levels. including cutting groove in wall and fixing with white cement neatly

finished with pointing including cost and conveyance of all materials, labour, HOM of

equipments and machineries all leads and lifts, loading and loading, transportation at

all floor levels complete for successful completion of work as per specification and as


Each 20.00 108.00 2160.00

TOTAL 35851227.50


engineering projects (india) ltd., (a govt. of...

Documents