element designs catalog 2016

®

º 2

Our Story®

Element Designs’ is a custom manufacturer of contemporary casework components. But we are actually

much more than that. We are a combination of American entrepreneurship, Swiss precision and sheer

determination to reach a common goal: to provide the finest contemporary styled architectural products to

the North American market.

When we started the company in 2003, none of the five shareholders knew anything about manufacturing

our original product: aluminum frame cabinet doors. We knew the European market was using them with

an increasing volume and we knew eventually all trends made it to the United States. And so began our

interesting journey of establishing and building an aluminum frame cabinet door market in the kitchen, bath

and office furniture industries.

The original intention was to focus primarily on sales and marketing, and to let a contract manufacturer

actually make the product. We quickly realized the North American market demanded high quality products

in a very short amount of time which meant our plan wasn’t realistic. We knew that we had to control all

manufacturing processes from beginning to end in order to grow and maintain a happy customer base. We

made the move to a manufacturing facility in an industrial part of Charlotte and began our slow and steady

climb into the world of manufacturing.

As our product offerings increased, so did our floor plan. We were fortunate to be able to expand our 10,000

square foot space into over 65,000 feet of office and manufacturing space to keep up with our growth and

product development.

However impressive our facility growth may seem, we realize it was our work team that truly made Element

Designs a success. We had a great product, we had efficient processes but it was the right team that made

it happen. Our employees are by far our most valuable asset, and we see their pride and craftsmanship in

every product that leaves our dock doors. For that, we are grateful.

After years of hard work and perseverance we can honestly say it hasn’t always been easy, but it has always

been worth it. We hope that our customers are able to see at least part of the love and pride that we put into

our products.

Element Designs235 Crompton St. Charlotte, NC 28273

Ph: 877-332-3396 Fx: 704-332-3267

[email protected]

Element Designs is a manufacturer of custom contemporary styled architectural millwork components, yet we are much more than that. The combination of American ingenuity and Swiss precision combined with a healthy dose of entrepreneurship across the founding partners were the ingredients of Element Designs. As we look back at the previous 12 years, we are reminded of all of the hard work that it has taken to reach today. When we look forward, we are very encouraged by the future of our business which is simply providing our existing and new customers with the premier aluminum, glass and acrylic products across the North American market.

When we founded Element Designs in 2003 and introduced the company at KBIS, we knew very little about manufacturing of our core product, aluminum frame cabinet doors. What we knew was that this style of door was very popular on the European market and that this trend could become popular in the US and Canada if a reliable partner focused on lead times, quality and customer service existed to provide the market with custom solutions. This was the start of the journey of establishing and building the aluminum frame cabinet door market within the residential kitchen and office furniture industries.

The original intention was to focus on primarily being a sales and marketing company by contract manufacturing our products. In a short amount of time after inception, it was obvious that this model would not be successful and that manufacturing in house would be the path for the future. The market’s demand for a highly flexible supplier of custom products at an exacting level of high quality standards precipitated a change in direction. In October of 2004, we began vertically integrating the manufacturing of our products and moved from our office location near downtown to an industrial area of Charlotte, North Carolina.

What started out as 10,000 sf of manufacturing space has grown steadily through the years and is now over 65,000 sf in 2015. We have been fortunate to expand without relocating which has been valuable as we have developed new product lines that can be produced in their own manufacturing unit, under one roof. Our growth and new product development is attributed to the acceptance of contemporary products in the North American market. It is also contributed to our customers, to whom we listen and respond. The resulting solutions have helped them fuel their business growth, for which we are grateful to be able to contribute.

In addition to our customers, the team at Element Designs is the number one asset to our business. We have had a great product and are continuously driving towards operational efficiencies but we have also been diligent about creating a culture within our company of fair where all team members work towards the common goals and values which are to exceed our customer’s expectations. This comes from pride in craftsmanship and an attitude of problem solving throughout our organization.

We appreciate your support of Element Designs and look forward to helping you expand your business for the future.

Sincerely,

Heinz, Mike, Nelson, Kevin & Beata

Our Story®

Proudly Made in the USA

º 2

Timeline

®

3 º

Best

of K

BIS

- Ki

tch

en

(PA

RA

PAN

® D

oo

rs)

Pla

tinu

m D

esig

n A

wa

rd(A

lum

inu

m F

ram

e D

oo

rs)

Mo

st In

no

vativ

e N

ew

R

eta

il Pr

od

uc

t (°

elu

ma

)

Ca

lifo

rnia

Clo

sets

V

en

do

r of t

he

Ye

ar

Best

of K

BIS

Go

ld -

Ki

tch

en

(°e

lum

a)

Fou

nd

ed

Ma

y 20

03

Alu

min

um

Do

or

Ma

nu

fac

turin

g B

eg

ins

Oc

tob

er 2

004

1st

Pla

nt

Exp

an

sion

Jan

ua

ry 2

006

PAR

APA

N®

Do

or

Fab

rica

tion

Be

gin

s Se

pte

mb

er 2

009

In-h

ou

se B

ac

kpa

intin

g

Op

era

tion

s Be

gin

Se

pte

mb

er 2

013

5th

Pla

nt

Exp

an

sion

Au

gu

st 2

014

°elu

ma

Ma

nu

fac

turin

g

Beg

ins

Ap

ril 2

007

Emp

loy

Ove

r 65

Te

am

Me

mb

ers

Se

pte

mb

er 2

015

2nd

Pla

nt

Exp

an

sion

Ap

ril 2

010

3rd

Pla

nt

Exp

an

sion

Ap

ril 2

012

4th

Pla

nt

Exp

an

sion

Jun

e 2

013

Base

Sys

tem

M

an

ufa

ctu

ring

Be

gin

s Ju

ne

201

0

Mo

ve t

o N

ew

Fa

cili

tyO

cto

be

r 200

4

Element Designs’ Corporate Offices & Production Facility in Charlotte, NC

Office Backpainting

Acrylic

Manufacturing

& Samples Aluminum Door

AssemblyBonding Specialty

Manufacturing

Aluminum Fabrication

Office

Packaging

Timeline

3 º

º 4

®

Our People ° Our Processes ° Our Products

®

5 º

Our vast North American sales network supports the residential kitchen, commercial casework and architectural millwork manufacturers across the casework industry. Visit www.element-designs.com for more information.

Our Network

º 6

Green Initiative

º 6º 6

Recycled Content All of our glass inserts contain at least 20% post industrial recycled content and the architectural resin uses a high percentage of post industrial material.

Regional suppliers Our aluminum products are manufactured with materials from regional suppliers thus reducing our carbon footprint.

Exceptional Durability Our aluminum products have an extremely long life time and are virtually maintenance free.

No VOCs Our aluminum doors, PARAPAN solid surface doors, eluma products and base systems do not contain VOCs. Because no chemicals or toxins are released from our products, there is zero effect on indoor air quality. Our backpainted glass utilizes water based paint which is low in VOCs and is safe for the environment.

Post Industrial Waste Recycling All of the waste generated during our manufacturing operations (primary materials such as aluminum and glass) is recycled. The aluminum extrusion is taken to a local metal recycling facility. Unusable glass is reused in asphalt production.

Recyclability and Reusability Our aluminum, glass and acrylic materials are completely recyclable. Our aluminum doors can be reused rather than discarded by simply replacing components (new inserts for existing doors).

Reclamation We offer a recycling service for all of our products once their useful life expires. Send your product back to us to be completely and properly recycled.

Packaging Materials Our corrugated edge wrapping, which protects our products in transit, is made of 100% recycled cardboard and our corrugated boxes have a high recycled content.

Company Recycling It is very important for our company and our employees to divert waste from our landfills whenever possible. We recycle all cans, glass and plastic bottles, office paper, paper products and cardboard at our manufacturing facility in Charlotte, NC, thus reducing our carbon footprint. We actively promote the importance of environmental responsibility and are proud to sponsor a recycling center for our industrial park.

What does it mean to be green? For a material or product to be considered green, it should have low impact on the environment and therefore favor environmentalism.

Aluminum’s inherently sustainable characteristics combined with the extrusion process make extruded aluminum the green building industry’s material choice for now and the future.

Reprinted with permission from the Aluminum Extruders Council

®

®

2 º Our Story

3 ° Timeline

4 º People, Processes & Products

5 º Our Network

6 º Green Initiative

8 º Inspiration Galleries

22 º Aluminum Frame Doors 34 º Profiles 46 ° Inserts 48 º °elusion Doors 50 º Integrated AVENTOS Lift Systems

54 º Sliding Door Systems 60 º Large Sliding Door Systems 62 º Small Sliding Door Systems 64 º Tracks & Guides 65 º Sliding Systems at a Glance

66 º PARAPAN® Solid Surface Doors 76 º Edge Finish Options 76 ° Note to Specifier 77 ° Colors 78 ° Care & Maintenance

80 º Decorative & Functional Hardware 82 ° GOLA Aluminum Channel 86 º Knobs & Pulls 87 º Hinges

88 º Backpainted Glass 94 ° Note to Specifier 96 ° Thickness & Edge Finish Options 96 º Standard & Custom Color Options 97 º Non-Standard Color Options

100 º Magnetic Markerboards 104 ° Backpainted Glass Colors 105 º Markerboard Accessories

106 º Etched Glass 111 º Etching Options

112 º Solid Glass Doors 116 ° Glass Options 117 º CRISTALLO Hardware

118 º ºeluma LED Shelving 124 º Profiles 126 ° Inserts & LEDs 127 º Components

128 º ºeluma DecoPanel & DecoSplash 136 º Profile 137 ° Inserts 138 º LEDs 139 ° Components

140 º Aluminum Frame Base Systems 146 º Profiles & Supports 147 ° Configurations

148 º Sample Kits & Showroom Program

154 º Photography Credits

155 º Sales Representatives

7 º

Green Initiative Table of Contents

®

®

7 º

º 8

aluminum frame base system, BS002

profile, white powdercoat

finish

solid glass doors low-iron clear

glass

PARAPAN® solid surface doors, anthracite

aluminum frame cabinet doors, AF010 frame, brushed stainless finish with white matte backpainted glass inserts & AF011 frame, brushed stainless finish with low-iron satin glass

backpainted glass backsplash, 6mm

gloss, anthracite grey (non-standard)

Featured Products:

®

9 º

Insp

iratio

n G

alle

ry

backpainted glass countertop and side panels, 12mm gloss,

white matte

aluminum frame sliding doors, AF011 frame,

brushed stainless finish, white matte

backpainted glass, lowiron satin glass inserts

º 10

Casework: Geiger International

Insp

iratio

n G

alle

ry

aluminum frame

cabinet doors,

AF010 frame,

aluminum finish

with custom grey

backpainted glass

magnetic

markerboards

with custom grey

backpainted glass

Featured Products:

®

11 º

º 12

Project: W Hotel, Los Angeles - West Beverly Hills, CA Design: Dawson Design Associates, Inc.

custom etched

mirror, close-up

custom etched glass, mirror

glass with safety backing,

6mm, customer designed

etched pattern

Featured Products:

®

13 º

Insp

iratio

n G

alle

ry

Image Courtesy of David Phelps Photography

º 14

Project: Virginia Tech FutureHaus Casework: Plain & Fancy Custom Cabinetry

The Virginia Tech FutureHaus is a project which brings the future of homebuilding to life with the collaboration

of professors, students and leading industry manufacturers who have the vision and dedication to visualize

technology and innovation which will be the future of home building and living. For more information, visit

their website: www.vtfuturehaus.org. (The FutureHaus living room can be found on page 71)

Featured Products:

®

15 º

Insp

iratio

n G

alle

ry

aluminum frame cabinet

doors, AF010 frame,

brushed stainless

finish with white gloss

backpainted glass inserts

backpainted glass

floor tile, white gloss

backpainted glass

countertop

º 16

Casework: California Closets

Featured Products:

®

17 º

Insp

iratio

n G

alle

ry

aluminum frame

sliding doors, AF003

frame, natural

aluminum finish with

clear glass

CD 50E sliding

hardware system

aluminum frame drawer

fronts, AF006 frame,

natural aluminum

finish, latte matte

backpainted glass

Image courtesy of California Closets. All rights reserved.

º 18

Casework: Elmwood Fine Custom Cabinetry

backpainted glass

backsplash, 6mm

gloss, scarlet

GOLA aluminum

profile spacer

channel, J-Shape and

C-Shape, stainless

steel finish

Featured Products:

®

19 º

Insp

iratio

n G

alle

ry

aluminum frame

doors, AF010 frame,

chrome finish

with white matte

backpainted glass

º 20

Casework by: California Closets

Featured Products:

®

21 º

Insp

iratio

n G

alle

ry


aluminum frame

°elusion doors, black

powdercoat frame,

smoked glass with black

backpainted frame

aluminum frame doors,

AF010 frame, natural

aluminum finish, silver

gloss backpainted glass

º 22º 22

23 º®

• Quality and Innovation - Our standard is aluminum doors of the highest quality in the industry. We strive for and promote innovation through continuous product development.

• Custom Manufactured - All doors are produced to our customers’ exact specifications with a +/- 1/32” tolerance using specialized manufacturing equipment.

• No Minimum Orders - We gladly fulfill orders of any size, from one to thousands of doors.

• Short Lead Time - The lead time for standard door orders is two weeks from approval. Expedite programs are available upon request.

• Fully Assembled - Our doors arrive fully assembled

with functional and decorative hardware borings and are ready to install for our customers’ precise applications.

• High Quality Aluminum - We produce door profiles in two class I anodized finishes: natural aluminum and brushed stainless steel look as well as offer three powder coat finishes: white, black and oil rubbed bronze.

• Tempered Safety Glass - All of our glass insert options are tempered for safety and durability.

• Unlimited Design Potential - Our profile and insert options can be combined to create thousands of unique design possibilities.

• Limited Lifetime Warranty - We guarantee the workmanship of our aluminum frame cabinet doors for their functional lifetime.

• Made in the USA - Our products are proudly made and assembled in the USA using domestic material suppliers.

Aluminum Frame Doors

Aluminum frame cabinet doors from

Element Designs are an ideal way to bring

contemporary elements to your kitchen

designs. Aluminum doors accentuate

and highlight kitchen cabinetry made

from a variety of materials including

wood, laminate, high gloss surfaces

and more. With eleven profiles in five

finishes and over fifty standard insert

options, the design possibilities for

aluminum frame doors are virtually

endless. Whether using aluminum doors

with decorative glass or resin inserts in

wall cabinets, backpainted glass or

opaque inserts in base cabinets and

pantry doors, aluminum frame cabinet

doors add unique and individual style

to kitchen environments.

Aluminum Frame Cabinet Doors

º 24

®

AF003 aluminum frame doors, chrome finish, with clear glass inserts. Image courtesy of Plato Woodwork.

25 º®

“Oceanside” by Wood-Mode Fine Custom Cabinetry. Featuring AF010 aluminum frame doors with bronze backpainted glass inserts.

Aluminum frame cabinet

doors from Element Designs

will become the focal point in

your kitchen design. Aluminum

doors accentuate and highlight

contemporary, modern, eclectic,

transitional and traditional kitchen

cabinetry styles. Whether used

in wall cabinets, base cabinets

or pantry doors, aluminum frame

cabinet doors add individuality

and sophistication to kitchen

environments. Aluminum frame

cabinet doors are a simple

way to add color or botanical

materials to kitchen interiors while

maintaining the simple design

aesthetic prevalent in today’s

cabinetry designs.


º 26

®

AF002 aluminum frame doors, natural aluminum finish with satin glass inserts. Image courtesy of Plain N Fancy Custom Cabinetry.

27 º®

AF003 aluminum frame doors, brushed stainless finish with low-iron satin glass inserts and base sytem BS001 in stainless steel finish. Image courtesy of Bellmont Cabinetry.

Element Designs produces

aluminum doors which are

custom manufactured to our

customers’ exact specifications

and can be used with both

frameless and framed cabinetry.

All doors include fully prepared

hinge borings at precise

locations which arrive ready to

install. The ease of installation

makes aluminum doors ideal

for both new construction and

remodeling projects. All of

Element Designs’ manufacturing

capabilities make them the

preferred supplier for individual

kitchens and large volume

projects alike.


º 28

®

AF002 aluminum frame doors, natural aluminum finish with satin glass inserts. Image courtesy of Mid Continent Cabinetry.

29 º®

AF003 aluminum frame doors, chrome finish with clear glass inserts; aluminum frame base system, BS001profile , oil rubbed bronze finish. Image courtesy of Plain N Fancy Custom Cabinetry


º 30

®

Aluminum doors are a beautiful and

functional addition to more than just

kitchens. The anodized aluminum and

high quality, durable insert selections

are able to withstand high heat and

humid environments without warpage

or discoloration through the life of the

product making it a great choice for

bathrooms or outdoor kitchens.

Aluminum doors add contemporary

accents to a variety of furniture

applications including entertainment

centers, home offices, credenzas and

more. The profile and insert options allow

you to create a design that is suited for any

taste while using products that are proudly

made in the USA using domestic material

suppliers and American craftsmanship.

AF003 doors in arctic gold finish with satin glass. Image courtesy of Wellborn Cabinet Inc.

31 º®

AF010 aluminum frame doors,brushed stainless finish with white matte backpainted glass. Image courtesy of Wood-Mode Fine Custom Cabinetry.

Element Designs’ aluminum

frame cabinet doors add form

and function to commercial

environments. The selection

of profile and insert options

provide unlimited design

possibilities for office

casework applications such

as credenzas, modesty

panels and markerboards.

Aluminum frame doors are

also ideal for functional

yet decorative doors in

healthcare, hospitality and

retail applications where

visibility of cabinet interiors is

important.


º 32

®

AF002 aluminum frame doors, natural aluminum finish with 3Form linea ivory inserts. Image courtesy of OFS, an OFS Brands Company.

33 º®

AF010 aluminum frame doors, natural aluminum finish with white gloss backpainted glass inserts. Image courtesy of Geiger.


º 34

®

Profile Finishes

AF003

ONLY

AF003 &

AF010

ONLY

Anodized Aluminum Powder Coat

chrome(C)

arctic gold(AG)

natural aluminum

(N)

brushed stainless

(S)

black(B)

white(W)

oil rubbed bronze(ORB)

Specialty Anodized

Technical specifications subject to change

AF001

AF005

AF003

AF007

AF010

AF002

AF006

AF009

AF004

AF008

AF011

Frame Profiles

Prof i les

35 º®

3/4” (19mm)

13/16” (20.5mm)

Design Guidelines:

- Maximum width & height = 48” (1219mm)

- Minimum width & height = 5.5” (102mm)

- Maximum square footage = 8 sf

- NOT recommended for drawer fronts

- Contact Element Designs for dimensions exceeding

recommended maximums

Insert Specifications:

- 4mm (.156”)

- Handle hole can be drilled through the frame

AF001

ORB

W

N

B

S


Image courtesy of Wood-Mode Fine Custom Cabinetry.Image courtesy of Kabi Cabinetry. Photography by Robert Kittila.


º 36

®

AF002Design Guidelines:

- Maximum width & height = 96” (2438.4mm)






- 4mm (.156”)

- Handle hole locations must be specified at time of

order if insert is tempered glass

13/16” (20.5mm)

2 1/8” (54mm)

5/16” (8mm)

Image courtesy of Wellborn CabinetsImage courtesy of OFS, an OFS Brands Company.

ORB

W

N

B

S

Prof i les

37 º®








- 4mm (.156”)


13/16” (20.5mm)

2 1/8” (54mm)


Image courtesy of Tiara Yachts.Image courtesy of Kabi Cabinetry. Photography by Robert Kittila.

ORB

W

N

B

S

AG

C


º 38

®








- 4mm (.156”)



13/16” (20.5mm)

1 3/4” (45mm)

9/16” (14mm)ORB

W

N

B

S

Image courtesy of California Closets. All rights reserved. Image courtesy of First Office, an OFS Brands Company.

Prof i les

39 º®








- 4mm (.156”)


13/16” (20.5mm)

1 3/4” (45mm)

ORB

W

N

B

S


Image courtesy of Bishop Cabinets. Image courtesy of California Closets. All rights reserved.


º 40

®








- 4mm (.156”) with flat edge polish

- Only available with opaque backpainted glass inserts



13/16” (20.5mm)

2 1/8” (54mm)

ORB

W

N

B

S

Image courtesy of Bishop Cabinets.


Prof i les

41 º®








- 4mm (.156”)


13/16” (20.5mm)

2 3/4” (70mm)


Image courtesy of Wende Woodworking

Image courtesy of Wellborn Cabinets.

ORB

W

N

B

S


º 42

®

Design Guidelines:

- Maximum width & height = 48” (1219mm)



- NOT recommended for drawer fronts




- 4mm (.156”)

- Can fit 6mm (.236”)inserts with special gasket



AF008

3/4” (19mm)

3/8” (9.5mm)

13/16” (20.5mm)


Image courtesy of First Office, an OFS Brands Company.

ORB

W

N

B

S

Prof i les

43 º®

Design Guidelines:







- 6mm (.236”)

- Can fit 4mm (.156”)inserts with special gasket


AF009 13/16” (20.5mm)

2 1/2” (63.5mm)

Image courtesy of First Office, an OFS Brands Company.


ORB

W

N

B

S


º 44

®








- 4mm (.156”) with flat edge polish

- Only available with opaque backpainted glass inserts



13/16” (20.5mm)

2 1/8” (54mm)

Image courtesy of Nucraft.

Image courtesy of Wood-Mode Fine Custom Cabinetry.

ORB

W

N

B

S

C

Prof i les

45 º®









- 4mm (.156”)


3/4” (19.05mm)

2 1/4” (57.2mm)

ORB

W

N

B

S



º 46

®

Standard Glass Insert Options

• High quality water based paint on low iron glass• All glass is tempered safety glass without a tempered logo unless otherwise specified• 177 Non-Standard and Custom colors available. See page 97 for more information.• All backpainted glass has a light grey backer for added durability

white gloss white matte black gloss black matte

sand gloss sand matte olive gloss olive matte

Backpainted Glass Insert Options

charcoal gloss charcoal matte

mocha gloss mocha matte

scarlet gloss scarlet matte silver gloss* silver matte* bronze gloss* bronze matte**metallic

satin clear reeded listral D austral master carre

• Glass inserts are 5/32” (4mm) thick• Etched and patterned side facing in • Glass is tempered safety glass without

tempered logo unless otherwise specified

• Mirror inserts are not tempered and include safety backer

smoked greylow-iron satin low-iron clear mirror

47 º®

aluminum laminate

brushed stainless laminate

platinum ice acrylic

Metallic Insert Options

• Inserts are 5/32” (4mm) thick• Not available with AF006 or AF010

quattro carbon wisp silver linea ivory

• Inserts are 5/32” (4mm) thick• Sandstone finish on front

and back • Resin inserts contain organic

materials and may vary in color and density due to natural conditions

• High gloss solid surface PARAPAN® material• PARAPAN® inserts not available with AF006 or AF010• Inserts are 5/32” (4mm) thick• UV and fade resistant• Easy to clean and water resistant

alpine white5910

white5907

opal white5196

latte5772

pale ivory5525

stone grey5295

light grey5290

cappuccino5773

kiwi5440

cobalt blue5380

black5299

brown5776

oxide red5771

signal red5655

orange5570

mint5421

turquoise5471

bordeaux5600

High Gloss PARAPAN® Insert Options

Images may not be exact representations of solid surface color options. Contact Element Designs

to obtain samples.

pop clear

• Complimentary cleaner provided with orders

bear grass fossil leaf thatch ting ting

Inserts

Architectural Resin Insert Options


º 48

®

°elusion doors are the newest style

of aluminum frame doors made for

modern interiors. The backpainted

glass border covers the aluminum

frame in its entirety which gives

the door surface additional depth.

The °elusion door is completely

customizable with several frame

finishes, five insert options and limitless

backpainted glass border colors.

AF010 aluminum frame doors, black powdercoat finish with satin glass inserts and black backpainted border. Image courtesy of Blum.

• Glass inserts are 5/32” (4mm) thick• Glass is tempered safety glass without

tempered logo unless otherwise specified

• Standard painted border = 2 1/4”• Custom painted borders widths are possible, min = 2 1/4”• Matte side facing in for satin glass unless otherwise

specified

* Smoked glass tint may affect painted border color

°elusion doors are the most progressive

aluminum frame cabinet doors made

for contemporary interiors. The

backpainted glass border covers the

aluminum frame in its entirety which

gives the door design an additional

innovative dimension. The °elusion

door is completely customizable with

two profile options, several frame

finishes, three standard insert options

and limitless backpainted glass

border colors. Because the color of

the glass may effect the backpainted

border, °elusion doors can really let

your creativity shine through with

distintive designs that can truly be

made your own.

AF010 aluminum frame doors, black powdercoat finish with satin glass inserts and black backpainted border.

49 º®

°elusion doors


*metallic

Profile Finishes

• Glass inserts are 5/32” (4mm) thick• Glass is tempered glass without logo

unless otherwise specified

• Standard painted border = 2 1/4”• Custom painted borders widths are possible,

min = 2 1/4”• Matte side facing in for satin glass unless

otherwise specified

sand gloss

olive gloss

mocha gloss

scarlet gloss

silver gloss* bronze gloss*

AF010AF006

Frame ProfilesContact Element Designs for availability of other profiles in

the °elusion door system

Also available with non-standard colors (see Pg. 95) and custom color

matches

smoked grey* low-iron satin low-iron clear

Standard Glass Insert Options

white gloss black gloss charcoal gloss

Backpainted Glass Border Options

* Smoked glass tint may affect painted border color

AF010

ONLY

Anodized Aluminum Powder Coat

ChromeAluminum Stainless Black White Oil Rubbed Bronze

Specialty


º 50

®

The AVENTOS program by Element

Designs offers a complete cabinet

door and functional hardware

solution for your casework

applications. Element Designs

will determine and include the

exact AVENTOS system parts wth

your aluminum or PARAPAN® door

order. Simply specify the AVENTOS

system along with the Element

Designs cabinet door and receive

a fully fabricated door with all

borings, mounting hardware

and AVENTOS parts packaged

together. Our service offers you a

turnkey package for your AVENTOS

applications using Element Designs’

cabinet doors.

AF003 aluminum frame doors, brushed stainless finish with satin glass inserts, AVENTOS HF lift system. Image courtesy of Norcia Fine Cabinetry.

AVENTOS lift systems brought to you by

51 º®

AF001 aluminum frame doors, natural aluminum finish with mirror and listral D inserts, AVENTOS HL lift systems. Image courtesy of Wood-Mode Fine Custom Cabinetry

AF003S aluminum frame doors, brushed stainless finish, 3Form fossil leaf inserts, AVENTOS HS lift systems. Image courtesy of Woodharbor Cabinets.

Cabinet Doors with Integrated AVENTOS Lift Systems


AVENTOS at a Glance

AVENTOS HS - Up and Over

• Single door front that swings over the top of the cabinet

• Ideal for wider wall cabinets with single fronts

• Suitable for wall cabinets with crown moulding

AVENTOS HF - Bi-Fold

• Two part door front that folds in the center when opening

• Ideal for tall wall cabinets with large fronts because the handle

stays within easy reach

• Can combine different door front styles (wood and aluminum)

• Innovative release feature that ensures finger safety

AVENTOS HL - Lift Up

• Single door front that lifts up parallel to the cabinet

• Suitable for wall cabinets in kitchens with high ceilings

• Ideal for counter top appliance garage applications

HF HS HL HK HK-S HK--XS

Area of Application

Tall wall cabinets Medium wall cabinets

Small wall cabinets Above refrigerator cabinets

Room Planning

Minimal top space requirement Design

Cabinet height range18 7/8” -

42”

13 3/4” -

31 1/2”

11 13/16” -

22 13/16”

11 13/16” -

24”

7 3/8” -

15 3/4”

9 3/8” -

24”

Cabinet width range 15” - 72” 15” - 72” 15” - 72” 15” - 72” 15” - 39” 15” - 72”


º 52

®

AVENTOS is available with Blum’s SERVO-DRIVE opening

feature. SERVO-DRIVE for AVENTOS allows a cabinet

with lift up doors to open with just a light touch. SERVO-

DRIVE also has an easily accessible switch to close the

door quietly with BLUMOTION.

SERVO-DRIVE is available with the following lift systems:

• HF

• HS

• HL

• HK

AVENTOS HK - Stay Lift

• Single door front that swings upward

• Ideal for small wall cabinets or accent cabinets 11 13/16” to 24” tall

• Suitable for wall cabinets with crown mouldings

AVENTOS HK-XS - Stay Lift


• Ideal for small wall cabinets or accent cabinets 9 3/8” to 24” tall

• Symmetrical Lift Mechnanism - can be used on one or both sides

• Designed for use with BLUMOTION hinges


53 º®


AVENTOS HK-S - Stay Lift


• Best suited for smaller wall cabinets 7 3/8” to 15 3/4” tall

• Ideal for applications above a refrigerator or pantry

• Suitable for wall cabinets with crown mouldings


º 54º 54

55 º®

• High quality sliding door systems for closets, pantries, cabinets and more

• All doors are produced to our customers’ exact specifications with a +/- 1/32” tolerance using specialized manufacturing equipment

• Sliding hardware comes pre-installed on the door (when possible)

• Sliding door rails and guides available in cut-to- length pieces for ease of installation

• Large sliding doors can be used in floor to ceiling applications, and can also be inset into casework

• Quick lead times

• No minimum order quantities

• Made in the USA - Our products are proudly made and assembled in the USA using domestic material suppliers

Sliding Door Systems

º 56

Element Designs can provide complete

sliding door systems which include our

aluminum frame or PARAPAN® panels

and sliding door hardware in one easy

to order kit based on your specific

requirements. Our smooth and quiet

sliding door systems can be used in

closet door, pantry and cabinetry

sliding door applications where quality

and durability are essential.

Sliding door systems can be fully

customized with your choice of profile

and insert options to coordinate with

any interior. Our top sliding and floor

sliding hardware options fit most sliding

door requirements and work in either

overlay or inset applications.

Sliding Door Systems ®

Sliding hardware brought to you by

AF011 aluminum frame doors, natural aluminum finish, clear glass inserts with custom etched design, with DN 80 CF sliding system.

57 º®

AF003 aluminum frame doors, natural aluminum finish with 3Form bear grass inserts, AF006 alunimum frame doors with olive gloss backpainted glass inserts. Image courtesy of Elmwod Fine Custom Cabinetry and Innovative Kitchen Design.

º 58


Element Designs’ aluminum frame

small sliding doors are a functional

and space saving way to add

modern design elements to cabinet

and furniture applications. Sliding

doors in cabinetry applications

allow for full accessibility to

cabinets where hinged doors are

not an option. The high quality

hardware used in our sliding door

systems provides smooth operating

components for all types of small

sliding door applications.

The simple to use sliding hardware

systems enable the sliding doors

to be mounted in both inset and

overlay sliding applications for

your different design needs. AF004 aluminum frame doors, white matte backpainted glass inserts, with SH 7035 system.

59 º

• Divider rails can be used with large sliding doors to provide additional design options

• Contact Element Designs for panel height and width limitations with integrated divider rails

• Multiple inserts may be used per door with divider rail

• Rail measures 25/32” (20mm) wide

• For use with the following profiles:

.781” (20mm

)

.375” (9mm)

Divider Rail

- AF001

- AF003

- AF005

- AF007

- AF009

- AF011


®

AF003 aluminum frame doors, brushed stainless finish with mocha backpainted glass and 3Form bear grass inserts. Image courtesy of Elmwod Fine Custom Cabinetry and Innovative Kitchen Design.

º 60

Bottom Load Bearing Roller System(2 per door - preinstalled)

CD 50 EDesign Guidelines:- Floor Sliding System, top guide and bottom track

- Floor to ceiling and inset casework applications

- Multiple planes of travel

- Inset or surface mount track

- Doors weighing up to 110 lbs

- Soft close mechanisms available

- Reference Sliding Systems At A Glance for maximum

door dimensions

Top Door Guides(2 per door)

Adjustable Position Door Stops


61 º

Design Guidelines:- Top Sliding System, top track with floor guides

- Floor to ceiling, inset casework, & barn door applications

- Recommended for use with one or two planes of travel


- Soft close mechanisms available


door dimensions

DN 80 CF

Top Load Bearing Carriers(2 per door - preinstalled)

Adjustable Position Door Stops


®

º 62

SH 7035Design Guidelines:

- Small Sliding System, top and bottom track

- Multiple planes of travel

- Inset or overlay track


door dimensions

Inset TrackUp to 140”

Small Door Carriers(4 per door - preinstalled)



63 º

Design Guidelines:

- Small Sliding System, top and bottom track

- Single or by-pass sliding doors, with surface mount or

inset track.


door dimensions


CD 30 CX

Inset Track

Small Door Carriers(4 per door - preinstalled)


®

º 64

1) Inset Single Track (021CXE)

2) Surface Mount Single Track (021CX)

3) Surface Mount Double Track (021CXD)

4) Top Hanging Fascia (U21 66)

5) Top Hanging Single Track (U21)

6) Top Hanging Double Track (U21 DBL)

7) Lateral Wall Bracket (023BRAU21)

8) Top Guide Double (GO22)

9) 7035 Inset Single Track

10) Round Floor Guide (GPR1150)

11) ‘L’ Bracket Floor Guide (LBR)

12) Easy Soft GOR

13) Easy Soft DN 80

Track and Guides

See Element Designs technical manual for installation specifications and instructions

1 2 3

4 5 6 7

8

10 11

9

12 13


65 º

Contact Element Designs for availability of other sliding hardware systems and applications.

* Maximum door height may exceed 96” depending on insert. Please contact Element Designs.

Sliding Doors at a Glance

CD 50 E DN 80 CF SH 7035 CD 30 CX

Area of Application

Closet doors Pantry

Tall cabinets Room Divider Small cabinets

Furniture Design

Wide aluminum frame doors Narrow aluminum frame doors

PARAPAN® doors Weight capacity (per door) 110 lbs (50 kg) 176 lbs (80 kg) 33 lbs (15 kg) 66 lbs (30 kg)

Door height maximum 96” * 96” * 48” 96”*

Door width maximum N/A N/A 36” 36”

Carrier Position

Top Sliding Floor Sliding

Door Positioning

Inset Floor to Ceiling

Door Travelling

Bypass Single Plane

Tracks & Guides

Track 1, 2, 3 4, 5, 6, 7 9 1, 2, 3

Guide 8 10, 11 9 1, 2, 3

Optional Features

Soft Close Mechanism 12 13


®

Sliding Systems At A Glance

º 66º 66

67 º®

PARAPAN® High Gloss Solid Surface Doors

• PARAPAN is a high quality, solid surface acrylic material, which is cell cast between sheets of heavy glass that yields a perfect flat mirror finish on both front and back surfaces

• All doors are produced to our customers’ exact specifications with a +/- 1/32” tolerance using specialized manufacturing equipment

• All edges are polished using specialized materials and techniques to produce finished edges to match the high gloss surface of the door/panel

• Available in 19 brilliant colors

• UV and fade resistant

• Water resistant

• Easy to maintain, see page 79 for more information

• Environmentally friendly - no VOCs

• Free of formaldehyde and plasticizers

• Doors arrive fully fabricated and ready to install

• 4mm sheets also available (1m x 3m sheet size)



• Proudly made in the USA

º 68

PARAPAN® High Gloss Solid Surface Doors®

Element Designs is proud to offer

PARAPAN® high gloss, solid surface

doors. Used by the leading European

luxury cabinet manufacturers, PARAPAN®

is the ultimate high gloss solid surface

cabinetry and surfacing product on the

market today. The PARAPAN® material

creates mirror like, highly reflective doors

and is engineered to be durable and

environmentally friendly.

The numerous color options and edge

detail possibilities make it an ideal choice

for the most discriminating residential

and commercial interiors. Whether used

exclusively or in combination with wood,

glass and other finishes, PARAPAN®

doors and surfaces add the perfect

contemporary element to a wide variety

of residential and commericial designs.

Alpine white PARAPAN® doors with integrated pulls. Image courtesy of Norcia Fine Cabinetry.

69 º®

Stone grey PARAPAN® cabinet doors, AF001 aluminum frame cabinet doors, brushed stainless finish with satin glass, °eluma DecoSplash with digitally printe glass insert BS001 aluminum frame base system, natural aluminum finish.

º 70

PARAPAN® high gloss solid surface doors

and panels add reflective and vibrant

color to commercial and residential

interiors. The simplicity of the product

allows the mirror like finish and color

to highlight all design compositions.

PARAPAN® is UV and fade resistant

which means that whites won’t yellow

over time and colors won’t fade, even

in direct sunlight or harsh lighting.

PARAPAN® is an extremely

environmentally friendly surfacing

material because it contains no

plasticizers or VOCs. There is no

negative effect on indoor air quality

where PARAPAN® doors and panels are

used.


Black PARAPAN® high gloss trade show display facade.

71 º®

Trade show display featuring high gloss solid surface black PARAPAN® facade.

º 72


White PARAPAN® cabinet doors and drawer fronts

Unlike other high gloss finish doors,

minor scratches can be removed

through buffing and polishing as

a result of the high quality solid

surface composition. Because of

the exceptional material quality,

PARAPAN® doors are the most

durable high gloss, solid surface

doors on the market today.

The solid material is also water

proof and warp resistant which

makes it ideal for even the most

humid environments. These

qualities also make PARAPAN® a

durable product for outdoor living

applications where temperature

extremes and weather prohibit use

of conventional cabinetry products.

73 º®

Aubergine18mm PARAPAN®

Signal red PARAPAN® cabinet doors and drawer fronts. AF002 aluminum frame cabinet doors with silver matte backpainted glass inserts.

º 74


PARAPAN® is a beautiful, highly

reflective material ideal for retail,

commercial and other high traffic

applications where impeccable

design is desired and durability

is essential. The solid surface

composition is UV and fade

resistant and will retain its vibrant

color indefinitely. Direct sunlight

and harsh indoor lighting will

not affect the PARAPAN® colors

through the life of the product.

Any minor surface damage

can be easily removed through

polishing and larger scratches can

be sanded away which makes

PARAPAN® a durable high gloss

cabinet front solution for any

application.

White PARAPAN® drawer fronts. Image courtesy of Christian Dior.

75 º®

Cobalt Blue PARAPAN® cabinet doors and drawer fronts, AF003 aluminum frame doors, brushed stainless finish with satin glass inserts. Image courtesy of Norcia Fine Cabinetry.

º 76

Integrated PullsEdge Radius Options

18 mm

3 mm 3 mm

18 mm

3 mm

R = 15

mm

Straight Curved

• All six surfaces have high gloss finish

• Functional and decorative hardware borings will be predrilled per specification

• Available in 19 colors

• Only available as finished doors and panels

• 4mm solid surface panels available in full sheets or cut to size for cabinet cladding and appliance applications

• PARAPAN 18mm doors are available with a choice of two standard integrated pull options

• Contact Element Designs for availability of additional custom integrated finger pull shapes

18 mm 18 mm 18 mm 18 mm

Straight Edge 1mm Radius 2mm Radius 3mm Radius


Note to Specifier:Thank you for considering PARAPAN in your project.

PARAPAN is the highest quality high gloss door on the market

and should be designed in at a premium level. Parapan

is solid acrylic (PMMA) which yields a perfect mirror type

finish with negligible distortions on all surfaces. PARAPAN

is homogenous in nature meaning that it is solid acrylic

throughout and maintains constant color throughout the

entire cross-section. As such, the product is repairable

and absent of adhesives, fiberboard, edge banding and

undesirable by-products associated with adhesives . Due

to its solid state, PARAPAN can be submersed and it will not

delaminate, warp or degrade in humid environments unlike

other constructed high gloss alternatives. When designing

with PARAPAN, please specify: solid, homogenous, acrylic

(PMMA) throughout, low VOC emitting, UV fade resistant,

water impervious characteristics to prevent substitutions of

inferior high gloss materials. Substitution with products of

laminated construction are not permitted.


Anthracite PARAPAN® reception counter panels. Image courtesy of Westside Immediate Care Center.

77 º®

18 mm

3 mm 3 mm

18 mm

3 mm

R = 15

mm

Color Options

alpine white 5910 white 5907 opal white 5196 latte 5772

pale ivory 5525 stone grey 5295light grey 5290 cappuccino 5773

anthracite* 5297brown 5776 black 5299

cobalt blue 5380

bordeaux 5600 signal red 5655 oxide red 5771orange 5570

mint 5421 kiwi 5440 turquoise 5471

Images may not be exact representations of solid surface color options. Contact Element Designs to obtain samples.

* Only available in 18mm thickness.

Product Options

º 78Technical specifications subject to change


Alpine white PARAPAN® cabinet doors and drawer fronts.

79 º®

PARAPAN® has a smooth and non porous surface. This means that dirt

does not adhere to it. When cleaning, use lukewarm water with a few

drops of mild dish detergent. It is recommended that a soft, lint free cloth

be used for cleaning PARAPAN®. The cloth should be thoroughly rinsed

before use. Do not use scouring powders or other abrasives. Do not

use products containing any oils. Components made from PARAPAN®

surfaces must not come into contact with organic solvents such as

thinners, alcohols, fuels, acetone (nail polish remover), benzene or carbon

tetrachloride. Do not wipe away dust with a dry cloth.

Removal of Marks

Polishing removes marks such as scratches and seals the surface. Polishing

should only be done after PARAPAN® is thoroughly cleaned and dried.

Never use paper towels to clean or dry PARAPAN® as they can cause

fine scratching on the sheet surface. Deep scratches can be removed

by progressive step wet sanding, finishing with an 800 grit abrasive, prior

to polishing.

Finish Maintenance

We strongly recommend ACRIFIX™ AC1010 plastics cleaner, made

especially for PARAPAN® and available from Element Designs. The

cleaner prevents electrostatic buildup and makes PARAPAN® easy to

clean.

Further care, fabrication and bonding instructions can be found in

the Element Designs’ PARAPAN® Technical Manual on our website:

www.element-designs.com/downloads.html

º 80º 80º 80º 80

81 º®

Decorative Hardware• Contemporary decorative hardware

• Anodized aluminum knobs and pulls

• Several finishes complement standard aluminum

frame door finishes

GOLA Aluminum Channels• Contemporary hardware systems to eliminate

surface mounted decorative hardware on doors

and drawer fronts

• Several finishes complement standard aluminum

frame door finishes (Note: aluminum and stainless

are not an exact match.)

Functional Hardware• Aluminum door hinges by Blum®

• Soft close technology

• TIP-ON for doors by Blum

º 82

®

GOLA Channel

GOLA aluminum spacer channels are a simple way to

achieve sleek, hardware-free cabinetry without additional

fabrication to cabinet doors or drawer fronts. The spacer

channels provide ample space for fingertips so that the

actual drawers and door fronts can be used to open and

close instead of exposed handles or pulls. The numerous

finish options accent or blend into most cabinetry

applications. Element Designs offers the convenience of

cut-to-size profiles to make your installation easier.

J-Shape and C-Shape aluminum spacer channel in oil rubbed bronze finish. J-Shape and C-Shape aluminum spacer channel in stainless finish.

Please note anodized aluminum finishes are not an exact match to our aluminum door profile

Profile Finishes Anodized Aluminum Powder Coat

clear anodized

(N)

stainless anodized

(S)

black(B)

white(W)

oil rubbed bronze(ORB)

Prof i les

83 º®

GC-8006


ORB

W

N

B

S

GC-AG8006J-Shape internal corner connector (pair)

GC-SG8006J-Shape external corner connector (pair)

GC-CF8006TP

J-Shape open end cap (pair)

GC-CF8006TPC J-Shape closed end cap (pair)

GC-SU116

GC-SU136

Mounting bracket for J-Shape or C-Shape profile, screw-on (pair)

Mounting bracket for J-Shape or C-Shape profile, dowel (pair)

J-Shape horizontal aluminum spacer channel120” length or cut-to-size

GC-8006

Side

Mounting Bracket

GC-CF8006TPGC-AG8006GC-SG8006GC-CF8006TPC

1 5/64” (27.2mm)

2 7/

32”

(56

.5 m

m)

º 84

®

GOLA Channel

GC-8007

GC-AG80067C-Shape internal corner connector (pair)

GC-SG8007C-Shape external corner connector (pair)

GC-CF8007TPC-Shape open end cap (pair)

GC-CF8007TPC C-Shape closed end cap (pair)

GC-SU116

GC-SU136



C- Shape channel is also suitable for vertical applications

.GC-CF8007TPGC-AG8007GC-SG8007GC-CF8007TPC

GC-8007

Side

Mounting Bracket

1 1/32” (26 mm)

2 7/

8” (

73 m

m)

C-Shape horizontal aluminum spacer channel120” length or cut-to-size

ORB

W

N

B

S

85 º®


GC-AG80067C-Shape internal corner connector (pair)

GC-SG8007C-Shape external corner connector (pair)

GC-CF8007TPC-Shape open end cap (pair)

GC-CF8007TPC C-Shape closed end cap (pair)

GC-SU116

GC-SU136



Easy to install profile snaps into cabinet

notches for J-Shape and C-Shape channels

Cabinet box construction modification for GOLA J-Shape and C-Shape spacer channels:

GC-1730

7.5mm18/64”

18 m

m45

/64”

8 mm5/16”

20 mm3/4”

3 mm1/8”

8 mm5/16”

20.8 mm13/16”

19.6

mm

25/3

2”

upper cabinet aluminum spacer channel120” length or cut-to-size

Width - Door

Width - Base

He

igh

t -

BaseH

eig

ht

- D

oo

rH

eig

ht

- D

oo

r

28mm

30.5mm

1.5mm1.5mm

1.5mm

B

W

SORB

W

N

B

º 86

®

Decorative Hardware

K001 K006 K007 K008 K009

available lengths:P1-127 Length: 7 3/8” (5” c. to c.)

P1-190 Length: 9 13/16” (7 1/2” c. to c.)

P1-250 Length: 12 13/16” (9 13/16” c. to c.)

P1-380 Length: 17 5/16” (14 15/16” c. to c.)

P1-640 Length: 27 9/16” (25 3/16” c. to c.)

P1-880 Length: 37” (34 5/8” c. to c.)

Natural Aluminum Finish Knobs

oil rubbed bronze finish

available lengths:

P1-76S Length: 5 5/16” (3” c. to c.)

P1-192S Length: 9 15/16” (7 9/16” c. to c.)

P1-320S Length: 15” (12 9/16” c. to c.)

available lengths:

P2-42Length: 3” (2” c. to c.)

P1-76ORB Length: 5 5/16” (3” c. to c.)

P1-192ORB Length: 9 15/16” (7 9/16” c. to c.)

P1-320ORB Length: 15” (12 9/16” c. to c.)

natural aluminum finish

P2-42 pulls also available in custom lengths. Contact Element Designs for details.

brushed stainless steel look finish

Handles & Pulls

Finger Pulls

K005

- natural aluminum finish- brushed stainless steel finish- black, white, and oil rubbed bronze powder coated finishes

available finishes:

87 º®


• TIP-ON for doors by Blum also available

• Contact Element Designs for availability of other hinge options and applications

• Complimentary hinge screws shipped with every order

Blum® narrow frame hingestraight arm, 120°, 5/8” (15mm) overlay, self close(PN H73T550A)

BLUMOTION Blum® 35mm cup hinge:straight arm, 110°, soft close with deactivation switch(PN H71B3550)

Blum® narrow frame hinge:straight arm, 95°, 11/16” (17mm) overlay, self close(PN H71T950A)

Additional narrow frame full and partial overlay hinges available, contact Element Designs for details

BLUMOTION Blum® narrow frame hingestraight arm, 95°, 5/8” (15mm) overlay, soft close with deactivation switch(PN H71B950A)

Blum® 35mm cup hinge:straight arm, 120°, self close(PN H71T5550)

Functional Hardware

º 88º 88

89 º®

Backpainted Glass

• Custom manufactured to your specifications

• Specially formulated water based paint with low VOC content

• Furniture quality finish with total opacity in backpainted glass panels

• Nine standard colors

• 177 non-standard colors

• Custom colors and metallic colors available

• Low-iron gloss (clear) glass in 4mm, 6mm, 10mm & 12mm

• Low-iron matte (acid etch) glass in 4mm, 6mm & 12mm

• Highest quality edge work options include flat edge polish and beveled edges

• Custom etching available

• Tempered safety glass

º 90

Element Designs offers backpainted

glass for both commercial and

residential applications. Custom

backpainted glass is available in a

variety of thicknesses in either gloss

or matte finish. Backpainted glass

is an ideal product for a variety of

applications such as wall panels,

partitions, backsplashes, table tops,

countertops and even trade show

flooring. The durability of glass

combined with vibrant color result

in beautiful surface materials for

any application. Element Designs

offers nine standard colors, 177 non-

standard colors and full custom color

matching capabilities to fully meet all

of your design expectations.

Backpainted Glass ®

White backpainted 6mm glass trade show flooring application (>4000 square feet)

91 º®

Custom color backpainted glass panels in gradient color wall.

º 92

Element Designs utilizes

environmentally friendly, water

based paint to produce an

impeccable furniture quality

paint finish. Backpainted glass

manufactured by Element Designs

is free of imperfections, completely

opaque and includes an engineered

backer coating for added durability

and opacity. All backpainted glass

is custom manufactured to size with

a variety of edgework options to

accomidate applications where

precision and attention to detail is

crucial. Additional glass fabrication

including cut-outs, notches, holes

and non-rectangular shapes is also

available.


Custom metallic backpainted glass (12mm)

93 º®

Backpainted glass countertop in light green (12mm) and custom etched backpainted glass wall panel in charcoal (4mm)

º 94


Custom metallic backpainted glass tabletop with custom logo (12mm), backpainted glass desk privacy panels (4mm), white magnetic markerboard, BS001 aluminum frame base system in natural aluminum finish.

Note to Specifier:

Thank you for considering Element Designs’

backpainted glass in your project. Backpainted

glass is produced at highest quality in the market

due to our customer’s expectations and the

vast vertical and horizontal application range

of the product. Element Designs only coats

low-iron optically clear glass for minimal optical

color distortion of the paint through the glass.

The paint itself is water based and produces

negligible VOCs during production. When

designing with Element Designs backpainted

glass, please specify: Element Designs, water

based paint, low iron glass, flat edge polished,

100% tempered, light grey backer, custom color

match capability, negligible VOC content and

total opacity to prevent substitutions of inferior

painted glass products.

95 º®

Black matte backpainted glass backsplash, matte red backpainted glass cabinet door inserts on AF010 profile.



• All Element Designs glass is tempered when diagonal exceeds 17”. Tempered glass will not have an etched tempered logo unless otherwise specified at time of order.

• Can be fabricated to include notches, cut-outs, holes and custom shapes.• Additional metallic paint options are available. Contact Element Designs for details.

Flat Edge Polish Bevel Seamed (concealed edge applications)

Thickness Gloss Matte (Single Side Acid Etched)

Edge Finish Availability Recommended Uses

4mm (5/32”) Yes Yes Flat, Seamed Horizontal & Vertical: Door inserts or framed applications

6mm (1/4”) Yes Yes Flat, Seamed Horizontal & Vertical: Backsplashes, wall cladding, shelving

10mm (3/8”) Yes No Flat, Bevel, Seamed Horizontal: Table tops, countertops, shelving

12mm (1/2”) Yes Yes Flat, Bevel, Seamed Horizontal: Table tops, countertops

Color swatches of these printed samples may vary slightly over time, and as such are only to be considered as a

guide. Please order an actual backpainted glass sample for accurate color representation.

Edge Finish Options

*Please refer to Design Guidelines for Edge Finish Availability for specific thicknesses

Design Guidelines

Element Designs can provide exact color matches for custom projects. A custom color match fee covers the paint matching process and two 12” x 12” samples for approval. Samples of non-standard colors can also be obtained for a fee.

Custom Colors

Standard Colors & Edgework

white gloss white matte black gloss black matte

sand gloss sand matte olive gloss olive matte

charcoal gloss charcoal matte

mocha gloss mocha matte

scarlet gloss scarlet matte silver gloss* silver matte* bronze gloss* bronze matte*

*metallic

Standard Colors

97 º®

Colors



Colors

99 º®

Technical

specifications and

color availability are

subject to change

* Additional

metallic colors are

also available.

Please contact

Element Designs

for color selections.

Colors

º 100®º 100

101 º®

Magnetic Markerboards

• non staining and non porous glass surface

• low iron glass for optimal color clarity (gloss only)

• durable and safe 4mm tempered glass

• easy to maintain and scratch resistant

• easy to install with integrated Z-Clip mounting

system

• magnetic glass can also be used as inserts in

aluminum frame doors

º 102

®

Magnetic Markerboards®

Magnetic markerboards are custom manufactured

backpainted glass panels with an integrated magnetic

backer. Backpainted glass is the perfect material for

a markerboard application because it is extremely

durable, easy to clean, and stain resistant. The

markerboards with added magnetic functionality are

ideal for both commercial and residential applications.

Element Designs’ magnetic markerboards can be

manufactured with standard, non-standard or custom

backpainted glass colors.

Magnetic markerboard, white gloss. Image courtesy of California Closets. All rights reserved. Magnetic markerboard, olive gloss.

103 º®

Magnetic markerboard in custom color. Image courtesy of Geiger International.

º 104

®

Magnetic Markerboards

• non-standard colors available

• custom color match available

• custom designs or logos available

• for use with rare earth magnets only

• all edges have flat edge polish

• wall mounding hardware included

• maximum size is 48” x 120”

• contact Element Designs for dimensions

exceeding recommended maximums

olive gloss

silver gloss

charcoal gloss

mocha gloss

white gloss

sand gloss

Standard Backpainted Glass Colors (Recommended for Markerboards)

®

Custom Designs

Element Designs has the

ability to add custom

graphics to our glass in

markerboard applications

such as geographic

maps, facility maps,

calendars, signage, logos,

monograms, borders and

more. The only limitation

is your imagination.

105 º®

Z-Clip

Wall Mounting Bracket

4 mm Backpainted Glass

0.063” Thick Tape

Accessory Set includes:

• magnetic eraser (white finish)

• magnetic marker container (white finish)

• eight rare earth magnets* (white finish)

* Rare earth magnets are powerful magnets which are a pinching hazard. Do not ingest or inhale magnets. Attraction of magnets in the body may cause serious injury and require immediate medical care. Magnets may cause interference with cardiac devices including pacemakers and pose potential hazards to patients. Keep away from small children. Keep away from TVs, VCR tapes and all magnetic media. Please read all terms and conditions located on the back of your invoice or packing slip, as well as the colored warning sheet which accompanies your shipment.

Wall

Wall Clip

4mm Glass

Magnetic Markerboard Accessory Set

MMB ClipMetal Backer

Element Designs’ magnetic markerboards

are manufactured with streamlined mounting

brackets which make the panels low profile.

The special Z-clip mechanism makes the

markerboards easy to install yet sturdy

enough to support large panels. The result is

a floating magentic markerboard on virtually

any surface.

6mm


º 106º 106

107 º®

Etched Glass

• Chemically etched glass with evenly “etched” surface

• Custom etched patterns or images using customer provided artwork and designs

• Ideal for signage and decorative surfaces

• Etching available on clear or backpainted glass

• Permanent etching will not wash or fade off

• Cost effective

• Fingerprint resistant unlike sandblasted glass

• No special sealant needed to protect etched surfaces

• Maintenance friendly - Easy clean up using standard glass cleaning supplies

• Tempered glass surfaces can be etched without damage or loss of glass strength

• Non-toxic and environmentally safe etching

technology

º 108

®

Etched Glass®

Custom etched glass by Element Designs

adds interest to your designs by transforming

ordinary clear or backpainted glass into

extraordinary custom design surfaces.

Our ability to etch clear or backpainted

glass opens the door to a world of unique

applications such as door inserts, wall

panels, privacy panels, tabletops, signage

and more. Element Designs can utilize most

customer provided high resolution images

in their proprietary etching process.

Element Designs utilizes an environmentally

friendly etching process to produce custom

etching with crisp, clear lines. Unlike

sandblasting processes, the chemical etch

does not fingerprint and is relatively low

maintenance, especially when compared

to alternative etched products.

Custom etched door insert on clear glass with negative etch pattern.

109 º®

Wall panels with custom etched pattern on mirror glass. Project by Dawson Design Associates. Photography by David Phelps Photography.

º 110

®

Etched Glass®

Custom etched backpainted glass signage in bronze (4mm) Custom etched panels on charcoal backpainted glass (4mm)

111 º®

Negative EtchPositive Etch

artwork provided is etched with an unetched (clear) background

artwork provided is unetched (clear) with an etched background

• All artwork provided must be 300 dpi or higher (Vector format files are preferred)

• Etching available on clear or backpainted glass

• Any graphics work provided by Element Designs may incur additional fees

Etching Options


º 112®º 112

113 º®

Solid Glass Doors

• Exclusive U.S. door integration partner for CRISTALLO hinge system

• All solid glass doors are produced to our customers’ exact specifications with a +/- 1/16” tolerance

• CRISTALLO door plates are permanently adhered by Element Designs and will not sag or require continual adjustment unlike other glass panel hinge systems

• 6mm (1/4”) thick glass

• Flat polish edges

• Tempered glass for safety and durability

• Pre-installed CRISTALLO door plate

• Additional glass fabrication available



º 114

®Solid Glass Doors

Solid glass doors in low-iron clear

®

Solid glass doors by Element Designs are a clean,

contemporary cabinetry or closet door solution.

The doors are ideal in closet, commercial,

retail, bathroom and kitchen applications,

especially where full interior cabinet visibility

is desired. The specially engineered glass

door is available with select 6mm glass types

including low-iron glass options. The CRISTALLO

hinge door plates are pre-adhered to the glass

by Element Designs and arrive ready to be

installed as cabinet doors. Element Designs is

proud to be the exclusive supplier of CRISTALLO

hinges in the United States. Our manufacturer

approved hinge adhesion procedures ensure

the doors are attached properly for safety and

durability. Solid glass doors can be fabricated

to accept decorative hardware or can be

used with touch to open hardware as well.

115 º®

Solid glass doors in low-iron satin. Kitchen by Planning & Building Inc.(Wellington, FL)Solid glass doors in low-iron clear

º 116

®Solid Glass Doors

Glass Options

satin clear

smoked greylow-iron satin low-iron clear

• Glass is 1/4” (6mm) thick

• Etched side facing out for all satin glass options

• Flat edge polish

• Glass is tempered safety glass without tempered logo unless otherwise specified

• Custom etching also available with customer provided artwork

• Contact Element Designs for glass options in additional thicknesses

• Maximum square footage = 10.5 sq ft

• Maximum height = 55” (1397 mm)

• Contact Element Designs for applications

exceeding these recommended maximums

Size Limitations

custom etch

®

117 º®

CRISTALLO Hinge CRISTALLO Hinge with Add-On Blumotion

CRISTALLO Hinge Information

• Cover cap for hinge arm included

• Variable 3-dimensional adjustment: Height +/- 3mm, Side +/- 2mm, Depth adjustment +3/-2 mm

• Tool-free assembly & removal of the door on the cabinet using clip-on assembly method

• Available with add-on Blumotion

• 125° opening angle

• In-line mounting plate included with hinge hardware

• Only available adhered to Element Designs solid glass doors

• TIP-ON for doors also available

CRISTALLO Hardware


º 118º 118

119 º®

°eluma LED Shelving

• Patented lighting technology

• All panels are produced to our customers’ exact specifications with a +/- 1/32” tolerance using specialized manufacturing equipment

• Environmentally friendly and energy efficient LED technology

• High quality 50,000 hour useful life LEDs (11.5 years at 12 hours/day)

• No heat or UV emissions: safe for use with cosmetics, food and beverages

• Fully adjustable in cabinet when used as shelf with adjustable components

• Simple installation: no hard wiring necessary

• Installed using standard shelf mounting hardware

• Weight capacity up to 75 lb/sf with tempered etched glass


• Short lead times

• ETL listed for US and Canada


º 120

°eluma LED Shelving ®

°eluma aluminum frame LED shelving is a patented

product developed by Element Designs in

conjunction with Tresco Lighting. The patented

technology enables full height adjustability,

which has been virtually impossible with existing

illuminated shelves on the market. °eluma is the

first and only light panel to combine the latest

technology with superior design, complete

flexibility, full customization and quick lead times for

a vast array of applications.

°eluma inspires dramatic yet functional design in

hospitality environments. Both new construction

and simple retrofits are easily accomplished

because °eluma is a fully custom product. The LEDs

emit zero UV rays and generate virtually no heat

in the °eluma system making it the ideal product

for the food & beverage industry. Tempered glass

allows for a significant load capacity per shelf.

Powered by:

EL001, natural aluminum finish with 1/4” etch glass, warm LED

121 º®

EL001, brushed stainless finish with 1/4” etch glass, RGB LED

º 122

°eluma used as accent illuminated

shelving adds an innovative design

element to kitchen environments. With

the growing popularity of open shelving,

glass door fronts, and exposed cabinetry,

°eluma shelving is an ideal way to

differentiate your kitchen design through

the combination of technology, design

and function. °eluma shelving can be used

as cabinet interior shelving, cantilevered

shelving and even cabinet bottoms which

double as soft task lighting. The variety

of profile finish options including natural

aluminum, brushed stainless, black,

white and oil rubbed bronze, blend with

traditional, transitional and contemporary

kitchen designs making °eluma seamless

to its surroundings.

EL001,brushed stainless finish with 1/4” etch glass, warm LED.


123 º®

°eluma aluminum frame LED panels

effectively and efficiently highlight

products in retail environments. °eluma is

designed for adjustable or fixed shelving

which gives the retailer the ability to easily

reconfigure the panels for current products

without additional costs. °eluma is safe for

displaying electronics, pharmaceuticals,

cosmetics and perishables because it

emits no UV light and negligible heat.

Element Designs’ LED panels are a cost

effective and energy efficient way to

draw attention to your target revenue

generating products. The long life span

of the high quality LEDs used in °eluma

provide additional cost savings to your

retail designs by reducing maintenance

costs over the life of the product.

EL001, natural aluminum finish with 1/4” etch glass, daylight LED

º 124

Design Guidelines:

• Minimum width / length = 5” (127 mm)

• Maximum width / length = 111” (2819.4 mm)

• 1/16” lines maximum standard depth = 18” (457.2 mm)

• 1/4” lines maximum standard depth = 15” (381mm)

• Maximum oversized depth / height = 36” (914.4 mm) with 1/16”

lines or 30” (762 mm) with 1/4” lines (LEDs located along two sides)

• 1/4” tempered safety glass has a weight bearing capacity of

approximately 75 lbs per square foot

• ºeluma shelves can be mounted with standard shelf support methods

• Intermediate shelf supports recommended for shelves over 30”

EL001Image courtesy of Elmwood Fine Custom Cabinetry

Image courtesy of Creative Closets



13/16” (20.5mm)

13/16” (20.5mm)

125 º®

Design Guidelines: • Minimum width / length = 5” (127 mm)

• Maximum width / length = 111” (2819.4 mm)

• 1/16” lines maximum standard depth = 18” (457.2 mm)

• 1/4” lines maximum standard depth = 15” (381mm)

• Maximum oversized depth / height = 36” (914.4 mm) with 1/16”

lines or 30” (762 mm) with 1/4” lines (LEDs located along two sides)

• 1/4” tempered safety glass has a weight bearing capacity of

approximately 75 lbs per square foot

• Element Designs offers cable mounting shelf systems for shelves up to

16” deep (only avaliable for EL002)

• ºeluma shelves can be mounted with standard shelf support methods.

• Intermediate shelf sheIf supports recommended for shelves over 30”

EL002

1 1/4” (31.8mm)

1/2” (12.7mm)

Profiles

1/4” Tempered Safety Glass

glass may contain minor imperfections which are inherent to the manufacturing process

Insert Etch Pattern Options LED Color Options

1/4” illuminated etched lines at 1/4” spacing

Profile Finishes

All LED color temperatures have a 50K hour useful life

natural aluminum brushed stainless

Anodized Aluminum

black white oil rubbed bronze

Powder Coat

º 126

daylight (6500K)

warm (3500K)

1/16” illuminated etched lines at 1/4” spacing

Linear Etch Pattern RGB (color changing LED) Includes programmable RF remote with color,

speed and dimming control



LEDs

127 º®

EL-RDSW-2M-BL or EL-RDSW-2M-WHRound rocker switch in black or white(Optional Accessory)

EL-LED-PKT-2M-BLDirect Wire Extension(REQUIRED - 1 per panel)

EL-EXT-2M-BLAdditional Extension Wire to LED-PKT-2M(OPTIONAL - 1 per panel)

Wiring Components

EL-DC-ELT60-CON60W Transformer - REQUIRED(Powers up to 20 LF of LEDs/ maximum 6 panels)

EL-RGB ControllerIncludes RF remote control with dimmer and multi color programing capabilities(Required for RGB LEDs)

EL-DIMMER-12VIncludes two RF remote controls (Optional Accessory)

Additional Components

EL-MAG-ADP-RCA-N1Magnetic Adapter (REQUIRED - 1 per panel)

EL-MAG-TR-1MMagnetic Power Bar Track 1m (39”) (REQUIRED)

EL-EXT-2M-BLAdditional Extension Wire to LED-PKT-2M(REQUIRED - 1 per track)

Fixed Shelving Adjustable Shelving

Components

º 128º 128

129 º®

°eluma LED DecoPanel & DecoSplash

• All panels are produced to our customers’ exact specifications with a +/- 1/32” tolerance using specialized manufacturing equipment (up to 118” x 36” per panel)

• Energy efficient LED technology with 50,000 hour useful life (11.5 years when used 12 hours per day)

• Available with warm (3500K), daylight (6500K) LEDs or RGB LEDs

• Numerous decorative insert panel options including architectural resins, digitally printed glass and patterned glass

• Glass can be custom printed with any high resolution image

• Frames are available in several finishes including natural aluminum, brushed stainless, black, white and oil rubbed bronze

• Three to four week lead time

• No minimum order quantity

• ETL listed for US and Canada


º 130

ºeluma DecoPanel

°eluma DecoPanel is an innovative illuminated

panel that integrates LED lighting with your

choice of decorative inserts. DecoPanel’s

ability to be used as a one sided or two sided

panel makes it ideal for a variety of decorative

lighting applications such as wall panels, room

dividers, privacy screens, bar fronts and more.

It can be seamlessly integrated into any interior

environment with the variety of frame finishes and

numerous resin, patterned and digitally printed

glass options available. The lit °eluma DecoPanel

makes an even more dramatic statement with

the addition of programmable, color changing

RGB LEDs. Element Designs offers a complete

custom turnkey illuminated solution that is fully

assembled and ready to install upon delivery.

°eluma DecoPanel makes integrating light into

interior spaces effortless.

°eluma DecoPanel ®

Project: Rennaisance Hotel Southpark, Charlotte, NC. Also features °eluma LED shelving, EL001 profile in oil rubbed bronze finish, 1/4” etch glass and warm LED.

131 º®

Brushed stainless finish, satin glass and RGB LEDs. Image courtesy of Hilton Garden Inn

º 132

°eluma DecoPanel can be manufactured with

custom digitally printed glass to create a one

of a kind focal point in commercial interiors.

The numerous aluminum frame finish options

and complete size customization enable

the DecoPanel to blend into any interior

environment.

°eluma DecoPanel ®

Oil rubbed bronze finish with satin glass insert, warm LEDs. Image courtesy of California ClosetsOil rubbed bronze finish, satin glass, warm LEDs. Image courtesy of California Closets. All rights reserved.

133 º®

Natural aluminum finish, custom digitally printed glass and daylight LEDs

º 134

°eluma DecoSplash is the newest

technology in backsplashes. With its

patent pending design, the DecoSplash

integrates ambient, dimmable LED

lighting with distinctive decorative

inserts in your choice of patterns for

limitless design possibilities. The stylish

backsplash can be made with a variety

of standard inserts in one of our glass

patterns, botanical resins, digitally

printed glass patterns or any custom,

high resolution image provided by the

customer. Five elegant aluminum frame

finish options blend seamlessly with most

kitchen and bar environments, while

the space saving frame uses negligible

countertop space.

°eluma DecoSplash ®

Natural aluminum finish, brown twigs printed glass and warm LEDs. Image courtesy of Kabi Cabinets. Photography by Robert Kittila.

135 º®

Natural aluminum finish, satin glass and daylight LEDs (three panels stacked vertically) Image courtesy of Elmwood Fine Custom Cabinetry.

º 136

°eluma DecoPanel & DecoSplash ®

1 5/16” (33mm)

1 3/8” (35mm)

IlluminatorDecorative Panel

Opaque Backer

Profile Finishes

Profiles


Anodized Aluminum


Powder Coat


Design Guidelines:

• Minimum height = 5” (127 mm)

• Maximum height = 96” (2438.4 mm) or 118” (2997.2 mm) based on

decorative insert

• Minimum width = 5” (127 mm)

• Maximum width = 36” (914.4 mm)

Profile

137 º®

thatch

bear grass fossil leaf silver wisp

Architectural Resin Insert Options

Textured Glass (Tempered)

satin austral

master carre

Contact Element Designs for custom images or digitally printed glass options

ting ting

reeded

pop clear

listral D

low-iron satin

Inserts

º 138

°eluma DecoPanel & DecoSplash ®

warm (3500K) daylight (6500K)

°eluma LED Color Temperatures

RGB (color changing LED)

RGB option Includes programmable RF

remote with color, speed and dimming control

capabilities

All LED color

temperatures have a

50K hour useful life


LEDs

139 º®

Wiring Components

EL-LED-PKT-2M-BLDirect Wire Extension(REQUIRED - 1 per panel)

EL-EXT-2M-BLAdditional Extension Wire to LED-PKT-2M(OPTIONAL - 1 per panel)

EL-RDSW-2M-BL or EL-RDSW-2M-WHRound rocker switch in black or white(Optional Accessory)

EL-DC-ELT60-CON60W Transformer - REQUIRED(Powers up to 20 LF of LEDs/ maximum 6 panels)

EL-RGB ControllerIncludes RF remote control with dimmer and multi color programing capabilities(Required for RGB LEDs)

EL-DIMMER-12VIncludes two RF remote controls (Optional Accessory)

Components

Additional Components

º 140

Aluminum Frame Base Systems

141 º®

• High quality anodized aluminum base systems

• Structurally rigid construction using 50mm x 50mm or 30mm x 30mm tube extrusion

• Finishes identical to aluminum frame door program

• Easy attachment to casework or countertops using screws, brackets or double sided tape

• All base systems are produced to our customers’ exact specifications with a +/- 1/32” tolerance using specialized manufacturing equipment

• Simple assembly (arrives fully or partially assembled)

• All required assembly tools ship with base systems

• Numerous configurations available





º 142

®

Element Designs’ aluminum frame base

systems add modern appeal to kitchen,

bath, closet and furniture applications.

The simple, yet functional extruded profile

provides functional and durable support

to casework designs while maintaining

a streamlined appearance ideal for

modern, contemporary and transitional

interiors. Aluminum frame base systems

are available in five finishes (natural

aluminum, brushed stainless, white,

black and oil rubbed bronze) to match

the aluminum frame door program and

coordinate with most interior finishes. The

high quality extruded or powder coated

finishes provide exceptional durability to

last a lifetime.

BS002, brushed stainless steel finish. Image courtesy of Bellmont Cabinetry.

143 º®

Kitchen island: BS001, brushed stainless finish with integrated stainless steel shelves and casters. Image courtesy of Kettler.


º 144

®

BS002 profile, white powdercoated finish

Aluminum frame base systems are

available in 50mm or 30mm square

tubing extrusion ideal for both small

and large scale pieces. The basic

configurations are suited for a variety

of applications including kitchen

islands, cabinet bases, vanity bases,

countertop supports, table bases and

more. The base systems arrive partially

or fully assembled and are easy to

install using assembly tools included

with each order. All aluminum frame

base systems come with leveling feet

or high quality, locking casters for

added versatility.

145 º®

BS001, brushed stainless finish. Image courtesy of Bishop Cabinets.

BS001 (50mm) BS002 (30mm)


º 146

®


Support Options

Profile Options

Leveling Foot2” diameter metal base with clear plastic

floor protector, up to 2” of adjustability

End Cap2” square metal base

Caster*Wheel caster with brake,

2 3/8” diameter non-marking nylon wheels * Only available with BS001

Finish Options

Profiles & Supports


Anodized Aluminum


Powder Coat

147 º®

Design Guidelines:

Minimum height for all systems is 6”

Custom configurations available, please submit

drawings to Element Designs for review.

Base System components are designed to support

static loads from furniture casework or serve as a

stationary support for tables and islands, unless finished

with a caster. Any other applications, including

furniture chairs, would not be recommended and

void all warranty.

System

Code

1.0 16” 48” 48”

MAX

height

MAX

depth

MAX

width

1.1 16” 48” 72”

1.2 16” 48” 96”

1.3 16” 48” 108”

1.4 16” 48” 120”

2.0 48” 48” 48”

2.1 48” 48” 72”

System Configurations

Configurations

º 148º 148º 148

149 º®

Sample Kits & Showroom Program

• Portable Aluminum Frame Sample Kit

• Essential Aluminum Door Sample Kit

• Designer Sample Kit

• PARAPAN® Door Sample Kit

• Individual Sample Doors

• ºeluma LED Panel Sample Kit

• ºeluma DecoSplash/DecoPanel Sample Kit

• Backpainted Glass Sample Kit

• Aluminum Frame Base System Sample

• Showroom Program

• Order Samples Online: store.element-designs.com

º 150

• Portable sales aide with all program options

• Aluminum frame corner profiles in natural aluminum finish

• Finish corner samples in brushed stainless, white, black and

oil rubbed bronze powder coat

• Standard glass inserts

• Backpainted glass inserts

• 3Form® inserts

• PARAPAN® inserts

• Metallic inserts

• Knobs

• Bar pull

• Finger pull

• 12” x 15” sample door

• Professional countertop display

• All aluminum frame corner profiles in natural aluminum

finish

• Finish profile samples in brushed stainless, white, black

and oil rubbed bronze powder coat

• Standard glass inserts

• Backpainted glass inserts

• 3Form® inserts

• PARAPAN® inserts

• Metallic inserts

Portable Aluminum Door Sample Kit

Essential Aluminum Door Sample Kit


Individual Sample Doors

• 15” x 12” fully assembled display doors with functional

hardware borings

• Individual sample aluminum frame and PARAPAN®

doors are available in any aluminum profile and

PARAPAN® color

• Contact Element Designs for more information

Sample Program ®

151 º

Portable Aluminum Door Sample Kit

PARAPAN® Mini Sample Kit

Designer Sample Kit

• Compact sales aide with all nineteen color options

• 4” x 4” 18mm sample section in anthracite with straight

integrated pull

• 4” x 4” 18mm sample section in white wth curved

integrated pull

• 4” x 4” 4mm samples in all nineteen colors

• Large18mm PARAPAN® suitcase kit also available -

Contact Element Designs for more information

• Handpicked selection of product options

• One aluminum frame corner profile in natural aluminum

finish

• Brushed stainless and oil rubbed bronze finish profile

samples

• 18mm PARAPAN® sample

• Backpainted glass samples in 12mm, 10mm, 6mm and

4mm in assorted standard colors

• Two standard glass samples

• One 4mm PARAPAN® sample

Backpainted Glass Sample Kit• Compact sales aide to illustrate various backpainted

glass inserts, thicknesses and finishes

• (1) - 12mm 4” x 14” backpainted glass sample



• (18) - 4mm 4” x 4” backpainted glass samples

®

º 152

• Portable °eluma shelf sales aide

• Sample °eluma panel

• 12 V DC 18W transformer

• 2M power lead for direct wiring

• Power bar & magnet adapter

• 2M lead for power bar

• 6 ft extension cord

• °eluma carrying case

• Portable DecoPanel sales aide

• Sample Decopanel with interchangeable insert slot

• 12 V DC 18W transformer

• 2M power lead for direct wiring

• 8” x 10” resin inserts

• 8” x 10” digital printed glass inserts

• 8” x 10” textured glass inserts

• 8” x 10” acrylic panels

• 6 ft extension cord

• °eluma carrying case

ºeluma LED Panel Sample Kit

ºeluma DecoSplash/DecoPanel Sample Kit


• 12” x 15” sample door

• Low-iron satin or smoked grey glass

• 6mm (1/4”) thick glass

• Flat polish edges

• Pre-installed CRISTALLO door plates

• CRISTALLO hinges included

Solid Glass Sample Door

Sample Program ®

153 º®

Please contact your local distributor for more information about our special showroom pricing program.

Showroom Program

• (1) - 4” GOLA C-Shaped section (brushed stainless)

• (1) - 4” GOLA J-Shaped section (oil rubbed bronze)

• (1) - 4” GOLA upper cabinet section (white)

• all samples include connector brackets

• 12” x 12” x 6” fully assembled base system

sample with adjustable leveling feet

• Available in BS001 or BS002 profile

• Natural aluminum or brushed stainless finish

GOLA Sample Kit

Aluminum Frame Base System Sample

º 154

®Photography Credits®

WENDE WOODThad Wende

785-966-247113365 - 178th Road 785-966-2376 faxMayetta, Kansas 66509 E-mail: [email protected]

A DESIGN/BUILD FIRM

We would like to thank our customers for the use of their images:

155 º®

Element Designs’ Sales Representatives

10

2

8

5

1

1113

3

4

14

15

6

9

12

7

1 - Bell Marketing

Steve Orr - C: 626-665-4657 - [email protected]

Ron Bell - C: 714-349-2788 - [email protected]

Derek Bell - C: 714-357-3958 - [email protected]

2 - Bilmar Company

Bob Dwyer - C: 815-355-4200 - [email protected]

Dennis Vercauteren - C: 815-341-0960 - [email protected]

Gary Taeger - C: 630-743-9499 - [email protected]

3 - Blueridge Sales

Howard Enros - C: 604-220-9498 - [email protected]

4 - Bryco Sales

Bob Bryant - C: 416-722-5264 - [email protected]

5 - Element Designs

Kevin Creedon - C: 704-467-5978 - [email protected]

6 - Component Group

David Strunsky - C: 336-210-9460 - [email protected]

Cheryl Billings - Ph: 336-886-5713 - [email protected]

David Conners - C: 404-218-9600 - [email protected]

7 - Horseshoe Wood

George Naughton - C: 469-628-1822 - [email protected]

Mike Adams - C: 469-401-585 - [email protected]

Roger Petter - C: 832-250-3754 - [email protected]

8 - Element Designs

Chris Dwyer - C: 602-469-9991 - [email protected]

9 - M & M Sales

Jon Mease - C: 484-357-9788 - [email protected]

Rob Stoll - C: 484-357-9787 - [email protected]

10 - Marjon Associates

Mark Weiner - C: 954-444-2430 - [email protected]

Bob O'Shaughnessy - C: 305-219-0002 - [email protected]

John O'Shaughnessy - C: 727-639-1329 - [email protected]

11 - Matt Gilbert

Matt Gilbert - C: 408-639-0603 - [email protected]

Steve Toy - C: 408-529-3738 - [email protected]

12 - MKB Sales

Mike Bruton - C: 845-598-3470 - [email protected]

Ron Winde - C: 401-965-0074 - [email protected]

13 - Isakson Sales Ltd.

Duane Isakson - C: 720-244-6031 - [email protected]

14 - Triax Sales

David Tress - C: 330-301-2000 - [email protected]

15 - WestCoast Marketing

Taylor Rooks - C: (360) 339-3137 - [email protected]

v. 9.15

v. 9.15v. 4.16

www.element-designs.com [email protected]

Phone: 877-332-3396

®

Proudly Made in the USA

element designs catalog 2016

Documents