• Four column high stiffness frame • Spherical seat allows initial free alignment

at the initial contact with the specimen • DuoCon Digital Controller • DuoSoft Software “Optional” • USB Connectivity • Easily select desired tests – Customize load

rate and platen • ACV 10% Fact and user specified tests for

changing load rate speed when doing other tests like bricks

• Dual like hydraulic pump with rapid approach

• Load frame capacity 2000kN (200 ton) (PGC — 2002 Model) - Loading platens and spacers 250 diameter

• Loading platen surface hardness 55 Rockwell hardness

• Range from 1800 KN up to 5000 KN compression machines available

• Manufactured In-House • SANAS Calibration Certificate Issued • Contact For Detailed Specifications

suppliers of land surveying and

construction material testing equipment

electronic compression testing machine

www.protsurv.co.za

Johannesburg Head Office : Protsurv Geo Centre Pty Ltd – 28 Boomkruiper Street, Kempton Park. (+27) 011 976 2070 sales@protsurv.co.za Durban Coastal Office : Protsurv Coastal – Top Floor 2 Lucas Drive, Hillcrest. (+27) 082 454 1725 glen@protsurv.co.za Mozambique Office : Geosol – Rau do Regulo, Hanhane No 430, Motola “C”, Perto de Banco ABC. (+258) 847469933 mozadmin@protsurv.co.mz Botswana Office : Protea – Plot 170 Unit 4, Gaborone International Commerce Park. (+267) 312 1146 stefan@protsurv.co.za Namibia Office : Protsurv Namibia - 233 Nickel Road, Unit 3, Prosperita, Windhoek (+264) 61 400582 stefan@protsurv.co.za Zambia Office : Survcon – 5262 Mukwa Road, Heavy Industrial Area, Lusaka Zambia (260) 964 065598 stefan@protsurv.co.za

DETAILED SPECIFICATIONS

Specification Compression Testing Machine Operating Voltage 220-240 VAC, 50Hz, 1ph

Power Consumption 750W

Country Of Manufacture JHB, South Africa

Service And Maintenance Agent In RSA Yes

Automatic Operation Yes

Manual Operation No

Variable Load Rate 40 – 1000kN/Min

Load Rate Measurement During Test Only

Max Calibrated kN Rating 2000 kN

CBR Test Testing – Automatic N/A

UCS Testing – Automatic N/A

ITS Testing - Automatic N/A

Marshall Testing – Automatic N/A

Compression Testing – Automatic Yes

Automatic Retracting After Each Test Completion Yes

ACV And 10% FACT Test - Automatic Yes

Cylinder Testing - Automatic Yes

Block Testing Yes

Beam Testing With Other Frame No

End Of Test Audible Alarm Yes

Safety Pressure Release Valve Yes

Piston Travel Limit Switch (Upper and Lower) Yes

Chain Driven N/A

Silent Gearbox Driven N/A

Safety – Guards Or Door Locking Mechanism Yes

Double Stage Pump Yes

Close Daylight Gap By Accelerated Pumping

Swivel Head With Springs No

Frame Spec *Foot Test Only EN12390.4

Patterns With Positive Location For 100mm Cubes Yes (No Charge)

Patterns With Positive Location For 150mm Cubes Yes (No Charge)

Approved Surface Hardness With Certificate *Foot Test Only Yes

Approved Flatness With Certificate *Foot Test Only Yes

SANAS and TMH1 Specification Compatible N/A

SANAS Calibration Certificate Yes

Foote Test Certificate *Foote Test Only Yes

USB Communication Interface Yes

Data Logger – Failing Load Yes

Data Logger – Load Rate vs Actual Rate No

10 Test Type Profile Memory No-Only Last Test To Be Displayed

Warranties And Guarantees One Year On Site *T&Cs Apply

Mass 1000Kg

SANAS Calibration Laboratory For Dimensional ‘ 033’ and Force ‘833’ Metrology JHB Head Office Only home.sanas.co.za

our workshop can perform calibrations, servicing

and repairs of cube press’s (on-site)

electronic compression testing machine