electric chain hoists - tacklers: hoists and eot …€¦ · · 2015-01-09electric chain hoists...
TRANSCRIPT
ELECTRIC CHAIN HOISTS 0.25-5.0 TONS
Tacklers Product Ranges:
Electric Wire Rope Hoists
Double Girder EOT Cranes
Single Girder Bridge Cranes
Overhead Gantry / Goliath Cranes
Jib Cantilever Cranes
Pulley Blocks
Cranes Accessories / Spare Parts
Tackle the load
With “TACKLERS” Tackle the load
With “TACKLERS”
Manufacturing for the
Last 35 Years
Electric Chain Hoist
The Slip Ring Clutch is provided
for assured safety.
The Hoist is coated with high
Gloss, anti-corrosive coated finish
to enhance the aesthetic beauty of
the product.
Also inbuilt Control Panel and an
ergonomically designed pendant
control for better handling and
efficient usage.
A swiveling bottom hook which
provides free rotation during
handling of loads.
The Gears and Load Chain
Wheel made from precision-
machined and case-hardened alloy
steel ensures long life and
noiseless operation.
Applications:
Steel Plants
Power Plants
Oil & Gas
Construction Site
Factories
Ware Houses
Heavy Fabrication Units
Railway Yards
Transporters
Mine Quarries
Harbours
Large Water Works
Marine
Other Industries
LAYOUT DRAWING OF ELECTRIC CHAIN HOIST
STANDARD SPECIFICATIONS (CH Electric Chain Hoist, Single – Speed, Single – Voltage)
MODEL LIFT (M)
CAPACITY (KGS.)
RATING (MIN)
HOIST MOTOR (KW)
HOIST SPEED (M/MIN)
LOAD CHAIN TEST LOAD (TON)
WT. FIXED SUSPENSION
(KGS.)
WT. WITH ET
(KGS.)
POWER SOURCES
50 HZ 60 HZ 50 HZ 60 HZ DIA (MM)
NO. OF FALLS
CH - S025
3
250
30
025 0.3 3.0 to 4 4.0 to 5 6 1 0.315 60 70 AC 3PH
220/380V 440V
CH - S050 500 0.37 0.44 3.0 to 4 4.0 to 5 6 2 0.625 72 80
CH - S100 1000 0.9 1.1 3.0 to 4 4.0 to 5 8 1 1.25 85 100
CH – S200 2000 1.65 2 3.0 to 4 4.0 to 5 8 2 2.5 90 105
STANDARD SPECIFICATIONS (CH Electric Chain Hoist, Dual – Speed, Single – Voltage)
MODEL LIFT (M)
CAPACITY (KGS.)
RATING (MIN)
HOIST MOTOR (KW)
HOIST SPEED (M/MIN)
LOAD CHAIN TEST LOAD (TON)
WT. FIXED SUSPENSION
(KGS.)
WT. WITH ET
(KGS.)
POWER SOURCES
50 HZ 60 HZ 50 HZ 60 HZ DIA (MM)
NO. OF FALLS
CH - D025
3
250
30/15
0.25/0.15 0.3/0.18 1.5 to 2 2 to 2.5 6 1 0.315 67 77 AC 3PH
220/380V 440V
CH - D050 500 0.37/0.22 0.44/0.26 1.5 to 2 2 to 2.5 6 2 0.625 80 88
CH - D100 1000 0.9/0.55 1.1/0.66 1.5 to 2 2 to 2.5 8 1 1.25 95 110
CH – D200 2000 1.65/1 2/1.2 1.5 to 2 2 to 2.5 8 2 2.5 101 116
CAPACITY (TON)
Major Dimensions in MM (approx.) A B C D E F G
0.25 450 480 380 550 330 340 440
0.50 500 510 380 585 330 340 460
1 550 550 410 680 410 375 520
2 550 580 410 680 410 375 540
Data Tolerance + 10% The design, materials and specifications are subject to change for improvements without notice.
CH – 0.25 TO 2 TON Diagrammatic Only
LAYOUT DRAWING OF ELECTRIC CHAIN HOIST
STANDARD SPECIFICATIONS (CH Electric Chain Hoist, Single – Speed, Single – Voltage)
MODEL LIFT (M)
CAPACITY (KGS.)
RATING (MIN)
HOIST MOTOR
(HP)
CT MOTOR
(HP)
HOIST SPEED
(M/MIN)
CT SPEED
LOAD CHAIN TEST LOAD (TON)
WT. FIXED SUSPENSION
(KGS.)
WT. WITH ET
(KGS.)
POWER SOURCES
50 HZ 50 HZ 60 HZ DIA (MM)
NO. OF FALLS
CH – S300 3
3000 30
3.00 0.5 3.0 to 4 12 – 15 10 1 3750 95 115 AC 3PH 220/380V
440V CH – S500 5000 4.00 0.75 1.5 to 2 12 - 15 10 2 6250 105 125
CAPACITY (TON)
Major Dimensions in MM (approx.) A B C D E F G
3.00 850 1250 575 800 350 To 400
450 1225
5.00 850 1250 575 800 450 1225
NOTES: 1. Only the standard lift Hoists, are enumerated above. Please apply for extra long lift. 2. Please state power source voltage and hertz on enquiry and ordering. 3. 4 core colored cords with rubber – covered power source cable is supplied, without plug. 4. Safety bottom hook is standard equipment on all capacities. Safety top hook is recommended optional equipment. 5. A chain collecting bucket is supplied with each hoist as standard attachment.
*Also available up to 10T in dual and creep speed. *Extra lift available. *Higher capacity shall be available on request.
All dimensions are approximate in mm. The design, materials and specifications are subject to change for improvements without notice.
CH – 3 TON TO 5 TON Diagrammatic Only
CRANE ACCESSORIES
Festoon System – C Rail CE Certified
Insulated Shrouded DSL System – CE Cert.
Push Button CE Certified / IP - 65
Flat Cables CE Certified
Male / Female Socketed Panels
End Carriages for Crane Gear Boxes for Crane Gear - Couplings T-Track Two/Four
Wheel Trolley Radio – Remote
Control
Roller Lever / Weight Operated Limit Switches
Master / Cam Controllers
Rotary Limit Switches Bottom Hook
Assembly LT-Beams with Sq. Bar / Rails for Crane Travel
Wire / Chain / Nylon Rope Sling
Rail & Rail Clamp
TECHNO INDUSTRIES
Plot No.: 613, Phase – IV, Nr. Neeka Tube Cross Road, G.I.D.C. Vatva, Ahmedabad – 382445, Gujarat, India.
Mobile: +91-9377039904 Phone: +91-079-40323330, 25830742, 25892129 Fax: +91-079-25831839 E-Mail: [email protected] Website: www.technoind.com