edgewater sm., med. & lg. luminaire catalog no.: lmeds ... catalog//2006 rev_post mount... ·...
TRANSCRIPT
Edgewater Sm., Med. & Lg. LuminaireCatalog No.: LMEDS, LMEDM &
LMEDL
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 1
S p e c i f i c a t i o n s
Description
The Edgewater style luminaire shall consist of a cast dec-orative base, cage, roof and finial, a ballast socket assem-bly, and panels. The panels and decorative elements aswell as optical systems available vary. Details on theseoptions are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for the small fitter is 2 7/8”Dia. x 3” High. Standard tenon size for the medium fitteris 3 1/2” Dia. x 3” High. Standard tenon size for the largefitter is 7” Dia. x 3/4” High Consult factory for othertenon sizes.
Revision 4/2007Edgewater Medium Luminaire
Material Product Style-_____ ALMEDS Cast Aluminum Luminaire Edgewater-Small _____ ALMEDM Cast Aluminum Luminaire Edgewater-Medium _____ ALMEDL Cast Aluminum Luminaire Edgewater-Large
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel
___ PRP3 - Polycarbonate RefractiveType III Panel ___ PPLF - Polycarbonate Frosted Panel
___ PRP5 - Polycarbonate Refractive Type V Panel ___ YPLF - Acrylic Frosted Panel
___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel
___ PWHP- Polycarbonate White Panel ___ YWHP- Acrylic White Panel
___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 2
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Refractors / Reflectors - Finial - CoatingsA LM EDM - MH100 / Q V1 / SD - PPLO - VC3 - FED - CB
AluminumLuminaire Edgewater- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Clear Poly. - Vertical type III Cut Off - Std. Finial -Classic Black Finish
Refractor / Reflectors
___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cut off/V
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ L22- Refractor 12” Type II ___ L2 5- Refractor 12” Type V
___ L 23- Refractor 12” Type III ___ ST3- Stacked Reflector Type III
___ ST5- Stacked Reflector Type V
Finials____ FED- Standard Edgewater Finial ____ FGV- Grandview Finial
____ XX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
____CP- Ceiling Mount/Pendent ____CL- Ceiling Mount/Chain
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
20” 20”20”
Edgewater Small Luminaire Edgewater Medium Luminaire Edgewater Large Luminaire
William & Mary Sm., Med. & Lg.Luminaire
Catalog No.:LMWMS, LMWMM & LMWML
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 3
S p e c i f i c a t i o n s
Description
The William & Mary style luminaire shall consist of a castdecorative base, cage, roof and finial, a ballast socketassembly, and panels. The panels and decorative elementsas well as optical systems available vary. Details on theseoptions are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for the small fitter is 2 7/8”Dia. x 3” High. Standard tenon size for the medium fitteris 3 1/2” Dia. x 3” High. Standard tenon size for the largefitter is 7” Dia. x 3/4” High Consult factory for othertenon sizes.
Revision 4/2007William & Mary Medium Luminaire
Material Product Style-_____ ALMWMS Cast Aluminum Luminaire William & Mary-Small_____ ALMWMM Cast Aluminum Luminaire William & Mary-Med. _____ ALMWML Cast Aluminum Luminaire William & Mary-Large
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel
___ PRP3 - Polycarbonate RefractiveType III Panel ___ PPLF - Polycarbonate Frosted Panel
___ PRP5 - Polycarbonate Refractive Type V Panel ___ YPLF - Acrylic Frosted Panel
___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel
___ PWHP- Polycarbonate White Panel ___ YWHP- Acrylic White Panel
___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 4
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Finial - Modification - CoatingsA LM WMM - MH100 / Q V1 / SD - PRP3 - FED - HS - CB
Aluminum LuminaireWilliam & Mary-100 Watt Metal Halide/ Quadravolt120 Volts /Medium base -Refractive Type III - Std. Finial -House side sheild-Classic Black Finish
Refractor / Reflectors
___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cut off/V
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ L22- Refractor 12” Type II ___ L2 5- Refractor 12” Type V
___ L 23- Refractor 12” Type III ___ ST3- Stacked Reflector Type III
___ ST5- Stacked Reflector Type V
Finials
____ FED- Standard Edgewater Finial ____ FGV- Grandview Finial
____ XX- Modifier
Modifications___ HS- House side shield ___ BT- Button type photo control
____CP- Ceiling Mount/Pendent ____CL- Ceiling Mount/Chain
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
William & Mary Small Luminaire William & Mary Medium Luminaire William & Mary Large Luminaire
Savannah Genie Style LuminaireCatalog No.: LMSVH
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 5
S p e c i f i c a t i o n s
Description
The Savannah Genie style luminaire shall consist of a castdecorative base, cage, roof and finial, a ballast socketassembly, and panels. The panels and decorative elementsas well as optical systems available vary. Details on theseoptions are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 3 1/2”Dia. x 3” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-
_____ ALMSVH Cast Aluminum Luminaire Savannah Genie
Source
___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage
___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type
____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage
____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base ____ SM- Mogul Base
____ SF- Fluorescent ____ SB- Bi Pin
Panels
___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel
___ PPLF - Polycarbonate Frosted Panel ___ YPLF - Acrylic Frosted Panel
___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel
___ PWHP- Polycarbonate White Panel ___ YWHP- Acrylic White Panel
___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 6
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Finial - Modifications - CoatingsA LM SVH - MH100 / Q V1 / SD - YSDP - FSA - HS - CB
Alum. Luminaire Savannah Genie- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Acrylic Seeded Panel-Std. Finial - House side shield -Classic Black Finish
Refractor / Reflectors
___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cut off/V
___ L22- Refractor 12” Type II ___ L2 5- Refractor 12” Type V
___ L 23- Refractor 12” Type III ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
____ FSA-Standard Savannah Finial ____ FGV- Grandview Finial
____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
____CP- Ceiling Mount/Pendent ____CL- Ceiling Mount/Chain
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
South Hadley Style LuminaireCatalog No.: LMSHD
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 7
S p e c i f i c a t i o n s
Description
The South hadley style luminaire shall consist of a castdecorative base, cage, roof and finial, a ballast socketassembly, and panels. The panels and decorative elementsas well as optical systems available vary. Details on theseoptions are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 3 1/2”Dia. x 3” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-
_____ ALMSHD Cast Aluminum Luminaire South Hadley
Source
___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage
___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type
____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage
____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base ____ SM- Mogul Base
____ SF- Fluorescent ____ SB- Bi Pin
Panels
___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel
___ PPLF - Polycarbonate Frosted Panel ___ YPLF - Acrylic Frosted Panel
___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel
___ PWHP- Polycarbonate White Panel ___ YWHP- Acrylic White Panel
___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 8
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Finial - Modifications - CoatingsA LM SHD - MH100 / Q V1 / SD - YPLO - FSA - HS - CB
Alum. Luminaire South Hadley- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Clear Acrylic - Std. Finial -House side shield - Classic Black Finish
Refractor / Reflectors
___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cut off/V
___ L22- Refractor 12” Type II ___ L2 5- Refractor 12” Type V
___ L 23- Refractor 12” Type III ___ ST3- Stacked Reflector Type III
___ ST5- Stacked Reflector Type V
Finials
____ FSA- Standard Savannah Finial ____ FGV- Grandview Finial
____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT-Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Costa Mesa Med. & Lg. LuminaireCatalog No.: LMCSM & LMCSL
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 9
S p e c i f i c a t i o n s
Description
The Costa Mesa Medium & Large luminaire shall consistof a cast decorative base, cage, roof and finial, a ballastsocket assembly, and panels. The panels and decorativeelements as well as optical systems available vary. Detailson these options are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for the medium luminaire is2 7/8” Dia. x 2” Hight. Standard tenon for the large lumi-naire is 2 7/8” Dia. x 3” High. Consult factory for othertenon sizes.
Revision 4/2007Costa Mesa Large Luminaire
Material Product Style-_____ ALMCSM Cast Aluminum Luminaire Costa Mesa Medium
(Note: Costa Mesa Medium 100 Watt maximum)
_____ ALMCSL Cast Aluminum Luminaire Costa Mesa Large
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel___ PPLF - Polycarbonate Frosted Panel ___ YPLF - Acrylic Frosted Panel___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 10
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Finial - Modifications - CoatingsA LM CSL - MH100 / Q V1 / SD - YPLF - FC3 - HS - CB
Alum. Luminaire Costa Mesa Lg.- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Acrylic Frosted - Std. Finial -House Side Shield - Classic Black Finish
Refractor / Reflectors
___ HC3- Horizontal Cut off/III (Large Luminaire Only)
___ HC5- Horizontal Cut off/V (Large Luminaire Only)
___ L63- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Chimney Small ___ CML- Chimney Large
Finials
____ FC3- Standard Costa Mesa Large Finial
____ FC2- Standard Costa Mesa Small Finial
____ XXX- Modifier
Modifications___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
Costa Mesa Large Luminaire
OrderingGuide
Revision 4/2007
Costa Mesa Medium Luminaire
Costa Mesa Small Style LuminaireCatalog No.: LMCSS
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 11
S p e c i f i c a t i o n s
Description
The Costa Mesa Small style luminaire shall consist of acast decorative base, cage, roof and finial, a socket, andpanels. The panels and decorative elements as well asoptical systems available vary. Details on these optionsare detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with a porcelain medium base socket. Seethe following page for more detailed information. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location. See the fol-lowing page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 2” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-_____ ALMCSS Cast Aluminum Luminaire Costa Mesa Small
Source (Requires a remote mounted ballast for HID)___ IN (Incandescent) ___ CP (Compact Fluorescent)
___ XX (Modifier)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts)
Ballast Type____ S Single Voltage
Voltage____ V1/ 120 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base
____ SF- Fluorescent ____ SB- Bi Pin
Panels
___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel
___ PPLF - Polycarbonate Frosted Panel ___ YPLF - Acrylic Frosted Panel
___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel
___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 12
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Finial - CoatingsA LM CSS - MH100 / Q V1 / SD - PWHP - FC2 - CB
Aluminum Luminaire Costa Mesa Small -100 Watt Inc./ Single Volt 120 Volts /Medium base -Poly. White Panels - Std. Cast Finial -Classic Black Finish
Refractor / Reflectors
___ L63- Refractor 6” Type III ___ L65- Refractor 6” Type V
___ L82- Refractor 8” Type II ___ L85- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Chimney Small ___ CML- Chimney Large
Finials
____ FC2- Standard Costa Mesa Small Finial ____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Dana Point Med. & Lg. LuminaireCatalog No.: LMDPM & LMDPL
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 13
S p e c i f i c a t i o n s
Description
The Dana Point Medium and Large luminaire shall consistof a cast decorative base, cage, roof, a ballast socketassembly, and panels. The panels and decorative elementsas well as optical systems available vary. Details on theseoptions are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 3” High. Consult factory for other tenon sizes.
Revision 4/2007Dana Point Large Luminaire
Material Product Style-_____ ALMDPM Cast Aluminum Luminaire Dana Point Medium_____ ALMDPL Cast Aluminum Luminaire Dana Point Large
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel___ PPLF - Polycarbonate Frosted Panel ___ YPLF - Acrylic Frosted Panel___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 14
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Modification - CoatingsA LM DPL - MH100 / Q V1 / SD - PWHP - HS - CB
Alum.Luminaire Dana Point Lg - 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Poly. White Panels - House side sheild -Classic Black Finish
Refractor / Reflectors
___ L63- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Chimney Small ___ CML- Chimney Large
Finials
____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Dana Point Small LuminaireCatalog No.: LMDPS
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 15
S p e c i f i c a t i o n s
Description
The Dana Point small luminaire shall consist of a cast dec-orative base, cage, roof, a ballast socket assembly, andpanels. The panels and decorative elements as well asoptical systems available vary. Details on these optionsare detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 3” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-_____ ALMDPS Cast Aluminum Luminaire Dana Point Small
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel
___ PPLF - Polycarbonate Frosted Panel ___ YPLF - Acrylic Frosted Panel
___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel
___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 16
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Modifications - CoatingsA LM DPS - MH100 / Q V1 / SD - PPLF - HS - CB
Aluminum Luminaire Dana Point Small- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Poly Frosted Panel - House side sheild - Classic Black Finish
Refractor / Reflectors
___ L63- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Chimney Small ___ CML- Chimney Large
Finials
____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Duluth Style LuminaireCatalog No.: LMDLT
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 17
S p e c i f i c a t i o n s
Description
The Duluth style luminaire shall consist of a cast decora-tive base, cage, roof, a ballast socket assembly, and pan-els. The panels and decorative elements as well as opticalsystems available vary. Details on these options aredetailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 4 1/2”Dia. x 2” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-_____ ALMDLT Cast Aluminum Luminaire Duluth
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
___ 400/ (400 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel___ PPLF - Polycarbonate Frosted Panel ___ YPLF - Acrylic Frosted Panel___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 18
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Modifications - CoatingsA LM DLT - MH100 / Q V1 / SD - PWHP - HS - CB
Aluminum Luminaire Duluth- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Poly. White Panel - House side sheild -Classic Black Finish
Refractor / Reflectors
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ L63- Refractor 6” Type III ___ L65- Refractor 6” Type V
___ L82- Refractor 8” Type II ___ L85- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Chimney Small ___ CML- Chimney Large
Finials
____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Harrisburg/Baltimore Style LuminaireCatalog No.: LMHRB
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 19
S p e c i f i c a t i o n s
Description
The Harrisburg/Baltimore style luminaire shall consist ofa cast decorative base, cage, roof and finial, a ballast sock-et assembly, and panels. The panels and decorative ele-ments as well as optical systems available vary. Details onthese options are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 4” Dia.x 5” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-_____ ALMHRB Cast Aluminum Luminaire Harrisburg/Baltimore
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel___ PRP3 - Polycarbonate RefractiveType III Panel ___ PPLF - Polycarbonate Frosted Panel___ PRP5 - Polycarbonate Refractive Type V Panel ___ YPLF - Acrylic Frosted Panel___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 20
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Finial - CoatingsA LM HRB - MH100 / Q V1 / SD - PRP3 - FHB - CB
Aluminum Luminaire Harrisburg/Baltimore-100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Poly. Ref. Type III - Std. Finial -Classic Black Finish
Refractor / Reflectors
___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cut off/V
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
____ FHB- Standard Harrisburg/Baltimore Finial
____ FNA- North Ave. Finial ____ F03- 3” Cast Ball Finial
____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Harrisburg Style LuminaireCatalog No.: LMHRR
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 21
S p e c i f i c a t i o n s
Description
The Harrisburg style luminaire shall consist of a cast dec-orative base, cage, roof and finial, a ballast socket assem-bly, and panels. The panels and decorative elements aswell as optical systems available vary. Details on theseoptions are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 5” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-
_____ ALMHRR Cast Aluminum Luminaire Harrisburg
Source
___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage
___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type
____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage
____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base ____ SM- Mogul Base
____ SF- Fluorescent ____ SB- Bi Pin
Panels
___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel
___ PRP3 - Polycarbonate RefractiveType III Panel ___ PPLF - Polycarbonate Frosted Panel
___ PRP5 - Polycarbonate Refractive Type V Panel ___ YPLF - Acrylic Frosted Panel
___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel
___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 22
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Finial - CoatingsA LM HRR - MH100 / Q V1 / SD - PRP3 - FHB - CB
Aluminum Luminaire Harrisburg- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Poly. Ref. Type III - Std. Cast Finial -Classic Black Finish
Refractor / Reflectors
___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cut off/V
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials____ FHB- Standard Harrisburg/Baltimore Finial
____ FNA- North Ave. Finial ____ F03- 3” Cast Ball Finial
____ XXX- Modifier
Modifications___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
MBNA Style LuminaireCatalog No.: LMMBN
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 23
S p e c i f i c a t i o n s
Description
The MBNA style luminaire shall consist of a cast decora-tive base, cage, roof and finial, a ballast socket assembly,and panels. The panels and decorative elements as well asoptical systems available vary. Details on these optionsare detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 3” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-_____ ALMMBN Cast Aluminum Luminaire MBNA
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel
___ PPLF - Polycarbonate Frosted Panel ___ YPLF - Acrylic Frosted Panel
___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel
___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 24
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Refractors / Reflectors - Finial -Mod - CoatingsA LM MBN - MH100 / Q V1 / SD - PPLO - HC3 - FMB -CT - CB
AluminumLuminaire MBNA-100 Watt Metal Halide/ Quadravolt 120 Volts/Medium base-Poly. Clear Panels- Horizontal Cut-Off III-MBNA Finial-Closed top-Classic Black
Refractor / Reflectors
___ HC3- Horizontal Cut off/III (Must have closed top roof modification)
___ HC5- Horizontal Cut off/V (Must have closed roof modification)
___ L 63- Refractor 6” Type II ___ L6 5- Refractor 6” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
____ FMB- Standard MBNA Finial ____ FEG- Eagle Finial
____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
___ CT- Closed Top Roof ___ HT- Heat Shield
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Yorktown Style LuminaireCatalog No.: LMYRK
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 25
S p e c i f i c a t i o n s
Description
The Yorktown style luminaire shall consist of a cast deco-rative base, cage, roof and finial, a ballast socket assem-bly, and panels. The panels and decorative elements aswell as optical systems available vary. Details on theseoptions are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 3” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-_____ ALMYRK Cast Aluminum Luminaire Yorktown
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel
___ PPLF - Polycarbonate Frosted Panel ___ YPLF - Acrylic Frosted Panel
___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel
___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 26
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Refractors / Reflectors - Finial - CoatingsA LM YRK - MH100 / Q V1 / SD - YCLP - HC5 - FBR - CB
Aluminum Luminaire Yorktown - 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base- Acrylic Clear Panels-Hori. Cut-off/V - Std. Finial -Classic Black Finish
Refractor / Reflectors
___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cu toff / V
___ L6 3- Refractor 6” Type III ___ L 65- Refractor 6” Type V
___ ST3- Stacked Reflector Type III ___ ST5- Stacked Reflector Type V
___ CMS- Chimney Small ___ CML- Chimney Large
Finials
____ FBR- Standard Borough Finial
____ FAR- Argus Finial ____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Arvida Style LuminaireCatalog No.: LMARV
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 27
S p e c i f i c a t i o n s
Description
The Arvida style luminaire shall consist of a cast decora-tive base, cage, roof and finial, a ballast socket assembly,and panels. The panels and decorative elements as well asoptical systems available vary. Details on these optionsare detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 3” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-_____ ALMARV Cast Aluminum Luminaire Arvida
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel
___ PPLF - Polycarbonate Frosted Panel ___ YPLF - Acrylic Frosted Panel
___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel
___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 28
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels -Finial - CoatingsA LM ARV - MH100 / Q V1 / SD - YSDP - FAV - CB
AluminumLuminaire Arvida- 100 Watt Metal Halide/ Quadravolt 120 Volts / Medium base -Acrylic Seeded panel - Arvida Finil -Classic Black Finish
Refractor / Reflectors
___ L6 3- Refractor 6” Type III ___ L 65- Refractor 6” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Chimney Small ___ CML- Chimney Large
Finials
____ FAV- Satandard Arvida Finial ____ FAR- Argus Finial
____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Allard Style LuminaireCatalog No.: LMALL
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 29
S p e c i f i c a t i o n s
Description
The Allard style luminaire shall consist of a cast decora-tive base, cage, roof and finial, a socket, and panels. Thepanels and decorative elements as well as optical systemsavailable vary. Details on these options are detailed on thenext page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with a porcelain medium base socket. Seethe following page for more options. All hardware isstainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location. See the fol-lowing page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 2” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-_____ ALMALL Cast Aluminum Luminaire Allard
Source (Requires a remote mounted ballast for HID)___ IN (Incandescent)
___ CP (Compact Fluorescent) ___ XX (Modifier)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type____ S Single Voltage
Voltage____ V1/ 120 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base
____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel
___ PPLF - Polycarbonate Frosted Panel ___ YPLF - Acrylic Frosted Panel
___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel
___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 30
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels -Finial - CoatingsA LM ALL - IN V1 / SD - PWHP - FAV - CB
AluminumLuminaire Allard- Incandescent/ 120 Volts /Medium base -Polycarbonate White Panel - Arvida Finial -Classic Black Finish
Refractor / Reflectors
___ L6 3- Refractor 6” Type III ___ L 65- Refractor 6” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Chimney Small ___ CML- Chimney Large
Finials
____ FAV- Standard Arvida Finial ____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Albany Style LuminaireCatalog No.: LMALB
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 31
S p e c i f i c a t i o n s
Description
The Albany style luminaire shall consist of a cast decora-tive base, cage, roof and finial, a socket, and panels. Thepanels and decorative elements as well as optical systemsavailable vary. Details on these options are detailed on thenext page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with a porcelain medium base socket. Seethe following page for more options. All hardware isstainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location. See the fol-lowing page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 2” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-_____ ALMALB Cast Aluminum Luminaire Albany
Source (Requires a remote mounted ballast for HID)
___ IN (Incandescent) ___ CP (Compact Fluorescent)
___ XX (Modifier)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts)
Ballast Type____ S Single Volts
Voltage____ V1/ 120 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base
____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel
___ PPLF - Polycarbonate Frosted Panel ___ YPLF - Acrylic Frosted Panel
___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel
___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 32
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Finial - CoatingsA LM ALB - IN V1 / SD - PWHP - FAV - CB
AluminumLuminaire Albany- Incandescent/ 120 Volts /Medium base -Polycarbonate White Panel - Arvida Finial -Classic Black Finish
Refractor / Reflectors
N/A
Finials
____ FAV- Standard Arvida Finial ____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Auroro Style LuminaireCatalog No.: LMAUR
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 33
S p e c i f i c a t i o n s
Description
The Auroro style luminaire shall consist of a cast decora-tive base, cage, roof and finial, a ballast socket assembly,and panels. The panels and decorative elements as well asoptical systems available vary. Details on these optionsare detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 3” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-_____ ALMAUR Cast Aluminum Luminaire Auroro
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel
___ PPLF - Polycarbonate Frosted Panel ___ YPLF - Acrylic Frosted Panel
___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel
___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 34
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Refractors / Reflectors - Finial - CoatingsA LM AUR - MH100 / Q V1 / SD - PWHP - L63 - FCW - CB
AluminumLuminaire Auroro- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Poly. White Panel - Refractor 6” Type III - Std. Cast Finial-Classic Black
Refractor / Reflectors
___ L6 3- Refractor 6” Type III ___ L 65- Refractor 6” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Chimney Small ___ CML- Chimney Large
Finials
____ FCW- Standard Clearwater Finial ____ FAV- Arvida Finial
____ FBR- Borough Finial ____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Auburn Style LuminaireCatalog No.: LMAUB
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 35
S p e c i f i c a t i o n s
Description
The Auburn style luminaire shall consist of a cast decora-tive base, cage, roof and finial, a ballast socket assembly,and panels. The panels and decorative elements as well asoptical systems available vary. Details on these optionsare detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 3” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-_____ ALMAUB Cast Aluminum Luminaire Auburn
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel
___ PPLF - Polycarbonate Frosted Panel ___ YPLF - Acrylic Frosted Panel
___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel
___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 36
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Finial - Modification - CoatingsA LM AUB - MH100 / Q V1 / SD - PPLF - FAT - HS - CB
AluminumLuminaire Auburn- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Poly Frosted - Athens Finial - House side sheild -Classic Black Finish
Refractor / Reflectors
___ L6 3- Refractor 6” Type III ___ L 65- Refractor 6” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Chimney Small ___ CML- Chimney Large
Finials
____ FAT- Athens Finial (Standard) ____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Ashland Style LuminaireCatalog No.: LMASH
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 37
S p e c i f i c a t i o n s
Description
The Ashland style luminaire shall consist of a cast decora-tive base, cage, roof and finial, a socket, and panels. Thepanels and decorative elements as well as optical systemsavailable vary. Details on these options are detailed on thenext page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with a porcelain medium base socket. Seethe following page for more options. All hardware isstainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location. See the fol-lowing page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 2” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-_____ ALMASH Cast Aluminum Luminaire Ashland
Source (Requires a remote mounted ballast for HID)___ IN (Incandescent) ___ CP (Compact Fluorescent)
___ XX (Modifier)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type____ S Single volt
Voltage____ V1/ 120 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base
____ SF- Fluorescent ____ SB- Bi Pin
Panels
___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel
___ PPLF - Polycarbonate Frosted Panel ___ YPLF - Acrylic Frosted Panel
___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel
___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 38
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Finial - -Modificatons - CoatingsA LM ASH - IN S V1 / SD - YFRP - FAT - HS - CB
AluminumLuminaire Ashland- Incandescent/ Single volt 120 Volts /Medium base -Acrylic Frosted Panel - Athens Finial - House side sheild -Classic Black Finish
Refractor / Reflectors
___ L6 3- Refractor 6” Type III ___ L 65- Refractor 6” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Chimney Small ___ CML- Chimney Large
Finials
____ FAT- Standard Athens Finial ____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Athens Style LuminaireCatalog No.: LMATH
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 39
S p e c i f i c a t i o n s
Description
The Athens style luminaire shall consist of a cast decora-tive base, cage, roof and finial, a socket, and panels. Thepanels and decorative elements as well as optical systemsavailable vary. Details on these options are detailed on thenext page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with a porcelain medium base socket. Seethe following page for more options. All hardware isstainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location. See the fol-lowing page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 2” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-
_____ ALMATH Cast Aluminum Luminaire Athens
Source (Requires a remote mounted ballast for HID)___ IN (Incandescent) ___ CP (Compact Fluorescent)
___ XX (Modifier)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts)
Ballast Type____ S Single volt
Voltage____ V1/ 120 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base
____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel
___ PPLF - Polycarbonate Frosted Panel ___ YPLF - Acrylic Frosted Panel
___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel
___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 40
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Finial - CoatingsA LM ATH - MH100 V1 / SD - PWHP - FAT - CB
AluminumLuminaire Athens- Incandescent/ 120 Volts /Medium base -Polycarbonate White Panel - Athens Finial -Classic Black Finish
Refractor / Reflectors
___ CMS- Chimney Small ___ CML- Chimney Large
Finials
____ FAT- Standard Athens Finial ____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Acton Style LuminaireCatalog No.: LMACT
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 41
S p e c i f i c a t i o n s
Description
The Acton style luminaire shall consist of a cast decora-tive base, cage, roof and finial, a ballast socket assembly,and panels. The panels and decorative elements as well asoptical systems available vary. Details on these optionsare detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 3” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-
_____ ALMACT Cast Aluminum Luminaire Acton
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel___ PPLF - Polycarbonate Frosted Panel ___ YPLF - Acrylic Frosted Panel___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 42
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels -Refractor Reflector - Finial - CoatingsA LM ACT - MH100 / S V1 / SD - PWHP - ST3 - FAN - CB
AluminumLuminaire Acton -100 Watt Metal Halide/ Single 120 Volts /Medium base -Polycarbonate White Panel - Stacked Reflector III -Acton Finial -Classic BlackFinish
Refractor / Reflectors
___ L6 3- Refractor 6” Type III ___ L 65- Refractor 6” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Chimney Small ___ CML- Chimney Large
Finials
____ FAN- Standard Acton Finial ____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Alta Style LuminaireCatalog No.: LMALT
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 43
S p e c i f i c a t i o n s
Description
The Alta style luminaire shall consist of a cast decorativebase, cage, roof and finial, a socket, and panels. The pan-els and decorative elements as well as optical systemsavailable vary. Details on these options are detailed on thenext page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with a porcelain medium base socket.See the following page for more options. All hardware isstainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location. See the fol-lowing page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 2” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-_____ ALMALT Cast Aluminum Luminaire Alta
Source (Requires a remote mounted ballast for HID)___ IN (Incandescent) ___ CP (Compact Fluorescent)
___ XX (Modifier)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type____ S Single Voltage
Voltage____ V1/ 120 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base
____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel
___ PPLF - Polycarbonate Frosted Panel ___ YPLF - Acrylic Frosted Panel
___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel
___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 44
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Refractors / Reflectors - Finial - CoatingsA LM ALT - IN V1 / SD - PWHP - CMS -FAN - CB
AluminumLuminaire Alta - Incandescent 120 Volts /Medium base -Poly White - Small Chimney -Acton Finial -Classic Black Finish
Refractor / Reflectors
___ L6 3- Refractor 6” Type III ___ L 65- Refractor 6” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Chimney Small ___ CML- Chimney Large
Finials
____ FAN- Standard Acton Finial ____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Argus Style LuminaireCatalog No.: LMARG
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 45
S p e c i f i c a t i o n s
Description
The Argus style luminaire shall consist of a cast decora-tive base, cage, roof and finial, a ballast socket assembly,and panels. The panels and decorative elements as well asoptical systems available vary. Details on these optionsare detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 3” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-
_____ ALMARG Cast Aluminum Luminaire Argus
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel___ PPLF - Polycarbonate Frosted Panel ___ YPLF - Acrylic Frosted Panel___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 46
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Refractors / Reflectors - Finial - CoatingsA LM ARG - MH100 / Q V1 / SD - PPLO - HC3 - FAR - CB
AluminumLuminaire Argus- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Poly Clear Panel - Horizontal Cut off III - Argus Finial -Classic Black Finish
Refractor / Reflectors
___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cut off/V
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ L6 3- Refractor 6” Type III ___ L 65- Refractor 6” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Chimney Small ___ CML- Chimney Large
Finials
____ FAR- Standard Argus Finial ____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
West Point Style LuminaireCatalog No.: LMWSP
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 47
S p e c i f i c a t i o n s
Description
The West Point style luminaire shall consist of a cast dec-orative base, cage, roof and finial, a ballast socket assem-bly, and panels. The panels and decorative elements aswell as optical systems available vary. Details on theseoptions are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 3 3/4”Dia. x 1” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-_____ ALMWSP Cast Aluminum Luminaire West Point
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel
___ PPLF - Polycarbonate Frosted Panel ___ YPLF - Acrylic Frosted Panel
___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel
___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 48
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels -Finial - Modification - CoatingsA LM WSP - MH100 / Q V1 / SD - PWHP - FWP - HS - CB
AluminumLuminaireWest Point- 100 Watt Metal Halide/Quadravolt 120 Volts /Medium base-Poly. White Panel- West Point Finial -House side sheild -Classic Black Finish
Refractor / Reflectors
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ L22- Refractor 12” Type II ___ L 23- Refractor 12” Type III
___ L 25- Refractor 12” Type V ___ ST3- Stacked Reflector Type III
___ ST5- Stacked Reflector Type V
Finials
____ FWP- Standard West Point Finial____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Jefferson Style LuminaireCatalog No.: LMJFF
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 49
S p e c i f i c a t i o n s
Description
The Jefferson style luminaire shall consist of a cast deco-rative base, cage, roof and finial, a ballast socket assem-bly, and panels. The panels and decorative elements aswell as optical systems available vary. Details on theseoptions are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 3” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-_____ ALMJFF Cast Aluminum Luminaire Jefferson
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel
___ PPLF - Polycarbonate Frosted Panel ___ YPLF - Acrylic Frosted Panel
___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel
___ PWHP- Polycarbonate White Panel ___ PRP3 - Polycarbonate Refractive Type III
___ XXX - Modifier ___ PRP5 - Polycarbonate Refractive Type V
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 50
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Finial - CoatingsA LM JFF - MH100 / Q V1 / SD - PRP3 - FJF - CB
AluminumLuminaire Jefferson- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Poly. Refractive Type III - Std. Jefferson Finial -Classic Black Finish
Refractor / Reflectors___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cut off/V
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ L82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Chimney Small ___ CML- Chimney Large
Finials____ FJF- Standard Jefferson Finial
____ XXX- Modifier
Modifications___ HS- House side shield ___ BT- Button type photo control
___ LR- Ladder Rest (Jefferson) ___ OT- Open Top
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Hamilton Style LuminaireCatalog No.: LMHAM
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 51
S p e c i f i c a t i o n s
Description
The Hamilton style luminaire shall consist of a cast deco-rative base, cage, roof and finial, a ballast socket assem-bly, and top and bottom panels. The panels and decorativeelements as well as optical systems available vary. Detailson these options are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 3” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-
_____ ALMHAM Cast Aluminum Luminaire Hamilton
Source
___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage
___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type
____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage
____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base ____ SM- Mogul Base
____ SF- Fluorescent ____ SB- Bi Pin
Panels
___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel
___ PRP3 - Polycarbonate RefractiveType III Panel ___ PPLF - Polycarbonate Frosted Panel
___ PRP5 - Polycarbonate Refractive Type V Panel ___ YPLF - Acrylic Frosted Panel
___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel
___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 52
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Finial - CoatingsA LM HAM - MH100 / Q V1 / SD - PRP5 - FJF - CB
AluminumLuminaire Hamilton- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Poly. Ref. Type V Panel -Std. Finial -Classic Black Finish
Refractor / Reflectors
___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cut off/V
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ L8 2- Refractor 8” Type II ___ L 85- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Chimney Small ___ CML- Chimney Large
Finials
____ FJF- Standard Jefferson Finial
____ FCW- Clearwater Finial ____ XXX- Modifier
Modifications___ HS- House side shield ___ BT- Button type photo control
___ OT- Open Top
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Verndale Style LuminaireCatalog No.: LMVDL
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 53
S p e c i f i c a t i o n s
Description
The Verndale style luminaire shall consist of a cast deco-rative base, cage, roof and finial, a ballast socket assem-bly, and panels. The panels and decorative elements aswell as optical systems available vary. Details on theseoptions are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 3” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-
_____ ALMVDL Cast Aluminum Luminaire Verndale
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel___ PRP3 - Polycarbonate RefractiveType III Panel ___ PPLF - Polycarbonate Frosted Panel___ PRP5 - Polycarbonate Refractive Type V Panel ___ YPLF - Acrylic Frosted Panel___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 54
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Refractors / Reflectors - Finial - CoatingsA LM VDL - MH100 / Q V1 / SD - PPLO - CMS - FBR - CB
AluminumLuminaire Verndale- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Poly. Clear Panel - Chimney Small - Std. Finial -Classic Black Finish
Refractor / Reflectors
___ L6 3- Refractor 6” Type III ___ L 65- Refractor 6” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Chimney Small ___ CML- Chimney Large
Finials
____ FBR- Standard Borough Finial
____ FEG- Eagle Finial (solid brass)
____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Franklin Gooseneck Style LuminaireCatalog No.: LMFRK
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 55
S p e c i f i c a t i o n s
Description
The Franklin Gooseneck style luminaire shall consist of acast decorative base, cage, roof and finial, a ballast socketassembly, and bottom plate/panels. The panels and deco-rative elements as well as optical systems available vary.Details on these options are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. This luminaire is supplied with a reverse tenon asshown. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-_____ ALMFRK Cast Aluminum Luminaire Franklin Gooseneck
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel___ PRP3 - Polycarbonate RefractiveType III Panel ___ PPLF - Polycarbonate Frosted Panel___ PRP5 - Polycarbonate Refractive Type V Panel ___ YPLF - Acrylic Frosted Panel___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 56
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Finial - CoatingsA LM FRK - MH100 / Q V1 / SD - PPLO - FRG - CB
AluminumLuminaire Franklin Gooseneck-100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Poly. Clear Panels- Std. Finial -Classic Black Finish
Refractor / Reflectors
___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cut off/V
Finials
____ FRG- Standard Franklin Gooseneck Finial
____ FID- Independence Square Finial
____ XX- Modifier
Modifications
___ BT- Button type photo control
___ TT- Twist Lock Photo Control (Franklin Gooseneck Finial required)
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Clearwater Style LuminaireCatalog No.: LMCLW
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 57
S p e c i f i c a t i o n s
Description
The Clearwater style luminaire shall consist of a cast dec-orative base, cage, roof and finial, a ballast socket assem-bly, and panels. The panels and decorative elements aswell as optical systems available vary. Details on theseoptions are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 3” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-_____ ALMCLW Cast Aluminum Luminaire Clearwater
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel___ PRP3 - Polycarbonate RefractiveType III Panel ___ PPLF - Polycarbonate Frosted Panel___ PRP5 - Polycarbonate Refractive Type V Panel ___ YPLF - Acrylic Frosted Panel___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 58
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Refractors / Reflectors - Finial - CoatingsA LM CLW - MH100 / Q V1 / SD - PPLO - HC3 - FCW - CB
AluminumLuminaire Clearwater- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Poly. Clear Panel -Horizontal Cut Off Type III - Std.. Finial -Classic Black
Refractor / Reflectors___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cut off/V
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ L63- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Chimney Small ___ CML- Chimney Large
Finials____ FCW- Standard Clearwater Finial ____ FEG- Eagle Finial
____ FBR- Borough Finial ____ XXX- Modifier
Modifications___ HS- House side shield ___ BT- Button type photo control
___ OT- Open Top
Coatings___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Chinatown Style LuminaireCatalog No.: LMCHN
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 59
S p e c i f i c a t i o n s
Description
The Chinatown style luminaire shall consist of a cast dec-orative base, cage, roof and finial, a ballast socket assem-bly, and panels. The panels and decorative elements aswell as optical systems available vary. Details on theseoptions are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 3 1/2”Dia. x 3” High. Consult factory for other tenon sizes.
Revision 4/2007
Material Product Style-_____ ALMCHN Cast Aluminum Luminaire Chinatown
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel
___ PRP3 - Polycarbonate RefractiveType III Panel ___ PPLF - Polycarbonate Frosted Panel
___ PRP5 - Polycarbonate Refractive Type V Panel ___ YPLF - Acrylic Frosted Panel
___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel
___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 60
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels -Finial -Modifications - CoatingsA LM CHN - MH100 / Q V1 / SD - YFRP - FO2 -HS - CB
AluminumLuminaireChinatown-100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base-Acrylic Frosted Panel -2” Ball Finial - House side shield -Classic Black Finish
Refractor / Reflectors
___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cut off/V
___ L63- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Chimney Small ___ CML- Chimney Large
Finials
____ FO2- Standard 2” Ball Finial ____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
S p e c i f i c a t i o n s
Description
The Center City style luminaire shall consist of a cast dec-orative base, cage, roof and finial, a ballast socket assem-bly, and globe. The globe and decorative elements as wellas optical systems available vary. Details on these optionsare detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 4” Dia.x 3” High. Consult factory for other tenon sizes.
Center City Style LuminaireCatalog No.: LMCTR
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 61Revision 4/2007
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 62
OrderingGuide
Revision 4/2007
Material Product Style-
_____ ALMCTR Cast Aluminum Luminaire Center City
Source
___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage
___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type
____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage
____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base ____ SM- Mogul Base
____ SF- Fluorescent ____ SB- Bi Pin
Globe
___ PS19 - Polycarbonate 199 Clear Stippled Globe___ YS19 - Acrylic 199 Clear Stippled Globe
___ PKSC - Polycarbonate 2085 Clear Globe ___ YKSC - Acrylic 2085 Clear Globe
___ PKSF - Polycarbonate 2085 Frosted Globe ___ YKSF - Acrylic 2085 Frosted Globe
AluminumLuminaire Center City- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Clear Poly 2085 Globe - Std. Small Acorn Finial -Classic Black Finish
Refractor / Reflectors
___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cut off/V
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ L22- Refractor 12” Type II ___ L2 5- Refractor 12” Type V
___ L 23- Refractor 12” Type III ___ ST3- Stacked Reflector Type III
___ ST5- Stacked Reflector Type V ___ CMS- Chimney Small
___ CML- Chimney Large
Finials
____ FAC- Standard Small Acorn Finial ____ FAH- AnaheimFinial
____ XXX- Modifier
Modifications
___ HS- House Side shield ___ BT- Button type photo control
___ HT- Heat Shield ___ TT- Twist Lock photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Finial - CoatingsA LM CTR - MH100 / Q V1 / SD - PKSC - FAC - CB
S p e c i f i c a t i o n s
Description
The Glencoe style luminaire shall consist of a cast deco-rative base, cage, roof and finial, a ballast socket assem-bly, and panels. The panels and decorative elements aswell as optical systems available vary. Details on theseoptions are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 3” High. Consult factory for other tenon sizes.
Glenco Style LuminaireCatalog No.: LMGLN
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 63Revision 4/2007
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 64
OrderingGuide
Revision 4/2007
Material Product Style-_____ ALMGLN Cast Aluminum Luminaire Glencoe
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel
___ PPLF - Polycarbonate Frosted Panel ___ YPLF - Acrylic Frosted Panel
___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel
___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Refractors / Reflectors - Finial - CoatingsA LM GLN - MH100 / Q V1 / SD - YPLO - ST5 - FGL - CB
AluminumLuminaireGlencoe-100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base-Acrylic Clear Panel - Stacked Reflector V -Glencoe Finial -Classic Black Finish
Refractor / Reflectors
___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cut off/V
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ L63- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III ___ ST5- Stacked Reflector Type V
___ CMS- Chimney Small ___ CML- Chimney Large
Finials
____ FGL- Standard Glencoe Finial ____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 65Revision 4/2007
Franklin Sq. Style LuminaireCatalog No.: LMFKS
S p e c i f i c a t i o n s
Description
The Franklin Sq. style luminaire shall consist of a castdecorative base, cage, roof and finial, a ballast socketassembly, and globe. The globe and decorative elementsas well as optical systems available vary. Details on theseoptions are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 2 1/2” High. Consult factory for other tenon sizes.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 66
OrderingGuide
Revision 4/2007
Material Product Style-
_____ ALMFKS Cast Aluminum Luminaire Franklin Sq.
Source
___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage
___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type
____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage
____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base ____ SM- Mogul Base
____ SF- Fluorescent ____ SB- Bi Pin
Globes
___ PS19 - Polycarbonate 199 Clear Stippled Globe___ YS19 - Acrylic 199 Clear Stippled Globe
___ PKSC - Polycarbonate 2085 Clear Globe ___ YKSC - Acrylic 2085 Clear Globe
___ PKSF - Polycarbonate 2085 Frosted Globe ___ YKSF - Acrylic 2085 Frosted Globe
Material Product Style - Source Wattage / Ballast Voltage / Socket -Globe - Finial - Modifications - CoatingsA LM FKS - MH100 / Q V1 / SD - PKSF - FAH - HS - CB
AluminumLuminaire Franklin Sq.- 100 Watt Metal Halide/ Quadravolt120 Volts /Medium base -Poly. Frosted Globe - Std. Finial - House side sheild -Classic Black Finish
Refractor / Reflectors
___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cut off/V
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ L22- Refractor 12” Type II ___ L2 5- Refractor 12” Type V
___ L 23- Refractor 12” Type III ___ ST3- Stacked Reflector Type III
___ ST5- Stacked Reflector Type V ___ CMS- Chimney Small
___ CML- Chimney Large
Finials____ FAH- Standard Anaheim Finial____ FCW - Clearwater Finial
____ FEG - Eagle Finial ____ FBR- Borough Finial
____ XXX- Modifier
Modifications___ HS- House Side shield ___ BT- Button type photo control
___ HT- Heat Shield
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 67Revision 4/2007
Spring City Park Style LuminaireCatalog No.: LMSCP
S p e c i f i c a t i o n s
Description
The Spring City Park style luminaire shall consist of a castdecorative base, cage, roof and finial, a ballast socketassembly, and globe. The globe and decorative elementsas well as optical systems available vary. Details on theseoptions are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 2 1/2” High. Consult factory for other tenon sizes.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 68
OrderingGuide
Revision 4/2007
Material Product Style-
_____ ALMSCP Cast Aluminum Luminaire Spring City Park
Source
___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage
___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type
____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage
____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base ____ SM- Mogul Base
____ SF- Fluorescent ____ SB- Bi Pin
Globes
___ PS19 - Polycarbonate 199 Clear Stippled Globe___ YS19 - Acrylic 199 Clear Stippled Globe
___ PKSC - Polycarbonate 2085 Clear Globe ___ YKSC - Acrylic 2085 Clear Globe
___ PKSF - Polycarbonate 2085 Frosted Globe ___ YKSF - Acrylic 2085 Frosted Globe
Material Product Style - Source Wattage / Ballast Voltage / Socket -Globe - Finial - Modifications - CoatingsA LM SCP - MH100 / Q V1 / SD - PKSF - FAH - HS - CB
AluminumLuminaire Spring City Park-100 Watt Metal Halide/Quadravolt120 Volts /Medium base -Poly. Frosted Globe- Std. Finial-House side sheild -Classic Black Finish
Refractor / Reflectors
___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cut off/V
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ L22- Refractor 12” Type II ___ L2 5- Refractor 12” Type V
___ L 23- Refractor 12” Type III ___ ST3- Stacked Reflector Type III
___ ST5- Stacked Reflector Type V ___ CMS- Chimney Small
___ CML- Chimney Large
Finials____ FAH- Standard Anaheim Finial____ FCW - Clearwater Finial
____ FEG - Eagle Finial ____ FBR- Borough Finial
____ FAC - Small Acorn Finial ____ XXX- Modifier
Modifications___ HS- House Side shield ___ BT- Button type photo control
___ HT- Heat Shield
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 69Revision 4/2007
Durphy School Style LuminaireCatalog No.: LMDRP
S p e c i f i c a t i o n s
Description
The Durphy School style luminaire shall consist of a castdecorative base, cage, roof and finial, a ballast socketassembly, and globe. The globe and decorative elementsas well as optical systems available vary. Details on theseoptions are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 3” High. Consult factory for other tenon sizes.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 70
OrderingGuideMaterial Product Style-
_____ ALMDRP Cast Aluminum Luminaire Durphy School
Source
___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage
___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type
____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage
____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base ____ SM- Mogul Base
____ SF- Fluorescent ____ SB- Bi Pin
Globes
___ PS19 - Polycarbonate 199 Clear Stippled Globe___ YS19 - Acrylic 199 Clear Stippled Globe
___ PKSC - Polycarbonate 2085 Clear Globe ___ YKSC - Acrylic 2085 Clear Globe
___ PKSF - Polycarbonate 2085 Frosted Globe ___ YKSF - Acrylic 2085 Frosted Globe
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Finial - Modifications - CoatingsA LM DRP - MH100 / Q V1 / SD - PKSF - WJJ - HS - CB
AluminumLuminaire Durphy School-100 Watt Metal Halide/Quadravolt120Volts/Mediumbase -Poly 2085 Frosted Globe-Stand Finial -House side sheild -Classic Black
Refractor / Reflectors
___ L22- Refractor 12” Type II ___ L2 5- Refractor 12” Type V
___ L 23- Refractor 12” Type III ___ ST3- Stacked Reflector Type III
___ ST5- Stacked Reflector Type V ___ CMS- Chimney Small
___ CML- Chimney Large
Finials
____ WJJ - White Jelly Jar Standard Finial
____ XXX- Modifier
Modifications
___ HS- House Side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
Revision 4/2007
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 71
Old NYC Style LuminaireCatalog No.: LMONY
S p e c i f i c a t i o n s
Description
The Old New York City style luminaire shall consist of acast decorative base, cage, roof and finial, a ballast socketassembly, and globe. The globe and decorative elementsas well as optical systems available vary. Details on theseoptions are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 2 1/2” High. Consult factory for other tenon sizes.
Revision 4/2007
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 72
OrderingGuide
Revision 4/2007
Material Product Style-_____ ALMONY Cast Aluminum Luminaire Old NYC
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Globes___ PS81 - Polycarbonate 8108 Obscured Globe
___ YS81 - Acrylic 8108 Obscured Globe
___ XXX - Modifier
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe -Modifications - CoatingsA LM ONY - MH100 / Q V1 / SD - PS81 - HS - CB
Aluminum Luminaire Old NYC- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Poly. Light Frosted - House side sheild -Classic Black Finish
Refractor / Reflectors
___ L63- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ L22- Refractor 12” Type II ___ L23- Refractor 12” Type III
___ L25- Refractor 12” Type V
Finials
____ FCW- Clearwater Finial ____ FEG- Eagle Finial
____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
___ HT- Heat Shield
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 73Revision 4/2007
Copenhagen Style LuminaireCatalog No.: LMCPN
S p e c i f i c a t i o n s
Description
The Copenhagen style luminaire shall consist of a castdecorative base, cage, roof and finial, a ballast socketassembly, and cylinder. The cylinder and decorative ele-ments as well as optical systems available vary. Details onthese options are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 3” High. Consult factory for other tenon sizes.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 74
OrderingGuide
Revision 4/2007
Material Product Style-_____ ALMCPN Cast Aluminum Luminaire Copenhagen
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Cylinders___ YCLO - Acrylic Clear Cylinder ___ YCLP - Acrylic Partially Frosted Cylinder
___ YCLF - Acrylic Fully Frosted Cylinder ___ XXX - Modifier
Material Product Style - Source Wattage / Ballast Voltage / Socket -Cylinder - Refractors / Reflectors - Finial - CoatingsA LM CPN - MH100 / Q V1 / SD - YCLP - L82 - FCH - CB
AluminumLuminaireCopenhagen-100 Watt Metal Halide/ Quadravolt120 Volts /Medium base -Acrylic Partial Frosted Cylinder- Ref. 8” Type II -Std. Finial -Classic Black
Refractor / Reflectors
___ L63- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Chimney Small ___ CML- Chimney Large
Finials
____ FCH - Standard Copenhagen Finial____ XXX- Modifier
____ FEG - Eagle Finial
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 75Revision 4/2007
Connecticut Style LuminaireCatalog No.: LMCNN
S p e c i f i c a t i o n s
Description
The Connecticut style luminaire shall consist of a castdecorative base, cage, roof and finial, a ballast socketassembly, and globe. The globe and decorative elementsas well as optical systems available vary. Details on theseoptions are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 2 1/2” High. Consult factory for other tenon sizes.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 76
OrderingGuide
Revision 4/2007
Material Product Style-
_____ ALMCNN Cast Aluminum Luminaire Connecticut
Source
___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage
___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type
____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage
____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base ____ SM- Mogul Base
____ SF- Fluorescent ____ SB- Bi Pin
Globes
___ PS19 - Polycarbonate 199 Clear Stippled Globe___ YS19 - Acrylic 199 Clear Stippled Globe
___ PKSC - Polycarbonate 2085 Clear Globe ___ YKSC - Acrylic 2085 Clear Globe
___ PKSF - Polycarbonate 2085 Frosted Globe ___ YKSF - Acrylic 2085 Frosted Globe
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Finial - Modification - CoatingsA LM CNN - MH100 / Q V1 / SD - PKSF - WJJ - HS - CB
AluminumLuminaire Connecticut- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Poly. Frosted Globe-Poly. White Jelly Jar-House side sheild -Classic Black
Refractor / Reflectors
___ L22- Refractor 12” Type II ___ L2 5- Refractor 12” Type V
___ L 23- Refractor 12” Type III ___ ST3- Stacked Reflector Type III
___ ST5- Stacked Reflector Type V ___ CMS- Chimney Small
___ CML- Chimney Large
Finials
____ WJJ - White Jelly Jar Standard Finial
____ XXX- Modifier
Modifications
___ HS- House Side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 77Revision 4/2007
Saratoga Style LuminaireCatalog No.: LMSRT
S p e c i f i c a t i o n s
Description
The Saratoga style luminaire shall consist of a cast deco-rative base, cage, roof and finial, a ballast socket assem-bly, and cylinder and bottom plate. The cylinder and dec-orative elements as well as optical systems available vary.Details on these options are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. Other materials are avail-able, gray iron per A.S.T.M. A48, or ductile iron perA.S.T.M. A536. The luminaire is most commonly sup-plied with either a porcelain medium or mogul base sock-et. See the following page for more options. All hardwareis stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 3” High. Consult factory for other tenon sizes.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 78
OrderingGuide
Revision 4/2007
Material Product Style-_____ ILMSRT Cast Iron Luminaire Saratoga _____ DLMSRT Cast Ductile Iron Luminaire Saratoga _____ ALMSRT Cast Aluminum Luminaire Saratoga
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Cylinders___ YCLO - Acrylic Clear Cylinder ___ YCLF - Acrylic Fully Frosted Cylinder
____ YCLP- Acrylic Partially Frosted Cylinder ___ XXX - Modifier
Material Product Style - Source Wattage / Ballast Voltage / Socket - Cylinders - Finial - Modification - CoatingsI LM SRT - MH100 / Q V1 / SD - YCLF - FSG - HS - CB
Iron Luminaire Saratoga- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Acrylic Frosted Cylinder - Std. Finial - House side sheild -Classic Black Finish
Refractor / Reflectors___ L22- Refractor 12” Type II ___ L2 5- Refractor 12” Type V
___ L 23- Refractor 12” Type III ___ ST3- Stacked Reflector Type III
___ ST5- Stacked Reflector Type V ___ CMS- Chimney Small
___ CML- Chimney Large
Finials____ FSG - Standard Saratoga Finial
____ FEG- Eagle Finial
____ F02 - Cast 2” Ball Finial
____ XXX- Modifier
Modifications___ HS- House side shield
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 79Revision 4/2007
Bryant Park Style LuminaireCatalog No.: LMBRY
S p e c i f i c a t i o n s
Description
The Bryant Park style luminaire shall consist of a cast dec-orative base, cage, roof and finial, a ballast socket assem-bly, and cylinder and bottom panels. The cylinder, panelsand decorative elements as well as optical systems avail-able vary. Details on these options are detailed on the nextpage.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 3/8”Dia. x 5 3/4” High. Consult factory for other tenon sizes.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 80
OrderingGuide
Revision 4/2007
Material Product Style-_____ ALMBRY Cast Aluminum Luminaire Bryant Park
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Cylinders___ YCLO - Acrylic Clear Cylinder ___ YCLF - Acrylic Fully Frosted Cylinder
___ YCLP - Acrylic Partially Frosted Cylinder ___ XXX - Modifier
Material Product Style - Source Wattage / Ballast Voltage / Socket - Cylinders - Refractors / Reflectors - Finial - CoatingsA LM BRY - MH100 / Q V1 / SD - YCLO - ST3 - FBY - CB
AluminumLuminaire Bryant Park- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Acrylic Clear Cylinder -Stacked reflector III - Std. Finial -Classic Black
Refractor / Reflectors
___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cut off/V
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ L63- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Chimney Small ___ CML- Chimney Large
Finials
____ FBY - Standard Bryant Park Finial
____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 81Revision 4/2007
Freer Gallery Style LuminaireCatalog No.: LMFRR
S p e c i f i c a t i o n s
Description
The Freer Gallery style luminaire shall consist of a castdecorative base, cage, roof and finial, a ballast socketassembly, and globe. The globe and decorative elementsas well as optical systems available vary. Details on theseoptions are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 4” Dia.x 7” High. Consult factory for other tenon sizes.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 82
OrderingGuide
Revision 4/2007
Material Product Style-
_____ ALMFRR Cast Aluminum Luminaire Freer Gallery
Source
___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage
___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type
____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage
____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base ____ SM- Mogul Base
____ SF- Fluorescent ____ SB- Bi Pin
Globes
___ PR24 -Polycarbonate Clear 24” Ball Globe ___ PW24 -Polycarbonate White 24” Ball Globe
Material Product Style - Source Wattage / Ballast Voltage / Socket -Globe - Refractor/Reflectors - Finial - CoatingsA LM FRR - MH100 / Q V1 / SD - PW24 - HC3 - FFE - CB
AluminumLuminaire Freer Gallery-100 Watt Metal Halide/Quadravolt 120 Volts/Medium base -Poly White 24” Dia.-Horiz. Cutoff/III- Std. Cast Finial-Classic Black Finish
Refractor / Reflectors
___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cut off/V
___ L82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
____ FFE - Standard Freer Gallery Finial
____ F03 - Cast 3” Ball Finial ____ XXX- Modifier
Modifications
___ HS- House Side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 83Revision 4/2007
Borough Style LuminaireCatalog No.: LMBRH
S p e c i f i c a t i o n s
Description
The Borough style luminaire shall consist of a cast deco-rative base, cage, roof and finial, a ballast socket assem-bly, and globe. The globe and decorative elements as wellas optical systems available vary. Details on these optionsare detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 3” High. Consult factory for other tenon sizes.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 84
OrderingGuide
Revision 4/2007
Material Product Style-
_____ ALMBRH Cast Aluminum Luminaire Borough
Source
___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage
___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type
____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage
____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base ____ SM- Mogul Base
____ SF- Fluorescent ____ SB- Bi Pin
Globes
___ PBRO - Polycarbonate Clear Globe ___ PBRP - Polycarbonate Partially Frosted
___ PBRF - Polycarbonate Fully Frosted ___ XXX - Modifier
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - Finial - CoatingsA LM BRH - MH100 / Q V1 / SD - PBRP - L63 - FBR - CB
AluminumLuminaire Borough- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Poly. Part Frosted - Ref. 6” Type III - Std. Finial -Classic Black Finish
Refractor / Reflectors
___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cut off/V
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ L63- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Chimney Small ___ CML- Chimney Large
Finials
____ FBR- Standard Borough Finial____ FSB - Small Brass Finial
____ FEG - Eagle Finial ____ XXX- Modifier
Modifications___ HS- House Side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 85Revision 4/2007
Quality Hill Style LuminaireCatalog No.: LMQLT
S p e c i f i c a t i o n s
Description
The Quality Hill style luminaire shall consist of a cast dec-orative base, cage, brass rope struts, roof and finial, a bal-last socket assembly, and globe. The globe and decorativeelements as well as optical systems available vary. Detailson these options are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 3” High. Consult factory for other tenon sizes.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 86
OrderingGuide
Revision 4/2007
Material Product Style-
_____ ALMQLT Cast Aluminum Luminaire Quality Hill
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Globes___ PBRO - Polycarbonate Clear Globe ___ PBRP - Polycarbonate Partially Frosted___ PBRF - Polycarbonate Fully Frosted ___ XXX - Modifier
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - Finial - CoatingsA LM QLT - MH100 / Q V1 / SD - PBRO - HC3 - FBR - CB
Alum.LuminaireQuality Hill- 100 Watt Metal Halide/Quadravolt 120 Volts /Medium base -Clear Globe -Horiz. Cut Off Type III - Std. Borough Finial -Classic Black
Refractor / Reflectors
___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cut off/V
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ L63- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Small Chimney ___ CML- Large Chimney
Finials
____ FBR- Standard Borough Finial____ FEG- Eagle Finial
____ XX- Modifier
Modifications___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 87Revision 4/2007
Reading Style LuminaireCatalog No.: LMRDG
S p e c i f i c a t i o n s
Description
The Reading style luminaire shall consist of a cast deco-rative base, cage, roof and finial, a ballast socket assem-bly, and cylinder. The cylinder and decorative elements aswell as optical systems available vary. Details on theseoptions are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 3” High. Consult factory for other tenon sizes.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 88
OrderingGuideMaterial Product Style-
_____ ALMRGD Cast Aluminum Luminaire Reading
Source
___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage
___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type
____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage
____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base ____ SM- Mogul Base
____ SF- Fluorescent ____ SB- Bi Pin
Globes___ PHGL - Clear Polycarbonate Hourglass Globe ___ YHGL - Clear Acrylic Hourglass Globe
___ PHGW -White Polycarbonate Hourglass Globe ___ YHGW -White Acrylic Hourglass Globe
___ PHGF - Fully Frosted Polycarbonate Hourglass Globe
___ YHGF - Fully Frosted Acrylic Hourglass Globe
___ XXX - Modifier
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractor / Reflector -Finial - CoatingsA LM RGD - MH100 / Q V1 / SD - PHGL - GCMS - FBR - CB
AluminumLuminaire Reading- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Poly. Half Hourglass-Glass Small Chimney - Std. Finial -Classic Black Finish
Refractor / Reflectors
___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cut off/V
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ L63- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Small Chimney ___ CML- Large Chimney
Finials
____ FBR- Standard Borough Finial ____ FEG - Eagle Finial
____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
Revision 4/2007
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 89
New Orleans Style LuminaireCatalog No.: LMNWO
S p e c i f i c a t i o n s
Description
The New Orleans style luminaire shall consist of a castdecorative base, cage, roof and finial, a socket, and cylin-der. The cylinder and decorative elements as well as opti-cal systems available vary. Details on these options aredetailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with a porcelain medium base socket. Seethe following page for more detailed information. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location. See the fol-lowing page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 2 1/2” High. Consult factory for other tenon sizes.
Revision 4/2007
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 90
OrderingGuide
Revision 4/2007
Material Product Style-
_____ ALMNWO Cast Aluminum Luminaire New Orleans
Source (Requires a remote mounted ballast for HID)
___ IN (Incandescent) ___ XX (Modifier)
___ CP (Compact Fluorescent)
Wattage
___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts)
Ballast Type
____ S Single Volt
Voltage
____ V1/ 120 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base ____ SF- Fluorescent____ SB- Bi Pin
Globe
___ PHHW - White Polycarbonate Hourglass Globe ___ PHLL - Clear Poly. Hourglass Globe
___ PHHF - Frosted Polycarbonate Hourglass Globe ___ XXX - Modifier
Material Product Style - Source Wattage / Ballast Voltage / Socket -Globe - Finial - CoatingsA LM NWO - MH100 / Q V1 / SD - PHHW - FAV - CB
AluminumLuminaire New Orleans- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Poly. Small Hourglass Globe - Arvida Finial -Classic Black Finish
Refractor / Reflectors
___ L63- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
Finials
____ FAV - Standard Arvida Finial ____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 91Revision 4/2007
Forty Niner Large Style LuminaireCatalog No.: LMFNL
S p e c i f i c a t i o n s
Description
The Forty Niner Large style luminaire shall consist of acast decorative base, cage, roof and finial, a ballast socketassembly, and globe. The globe and decorative elementsas well as optical systems available vary. Details on theseoptions are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Intensity Discharge ballast.The ballasts are high power factor core and coil type andare available in a wide range of sources and voltages. Seethe following page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 3” High. Consult factory for other tenon sizes.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 92
OrderingGuide
Revision 4/2007
Material Product Style-_____ ALMFNL Cast Aluminum Luminaire Forty Niner Large
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Globes___ PS4C - Polycarbonate Clear Globe ___ PS4F - Polycarbonate Fully Frosted Globe
___ PS4P -Polycarbonate Partially Frosted Globe ___ XXX - Modifier
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Modificationss - CoatingsA LM FNL - MH100 / Q V1 / SD - PS4F - HS - CB
AluminumLuminaire Forty Niner Large- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Poly Clear Globe - House side sheild -Classic Black Finish
Refractor / Reflectors
___ L63- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Small Chimney ___ CML- Large Chimney
Finials
____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 93Revision 4/2007
Forty Niner Small Style LuminaireCatalog No.: LMFNS
S p e c i f i c a t i o n s
Description
The Forty Niner Small style luminaire shall consist of acast decorative base, cage, roof and finial, a socket, andcylinder. The cylinder and decorative elements as well asoptical systems available vary. Details on these optionsare detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with a porcelain medium base socket. Seethe following page for more options. All hardware isstainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location. See the fol-lowing page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 2 1/2” High. Consult factory for other tenon sizes.
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 94
OrderingGuideMaterial Product Style-
_____ ALMFNS Cast Aluminum Luminaire Forty Niner Small
Source (Requires a remote mounted ballast for HID)
___ IN (Incandescent) ___ XX (Modifier)
___ CP (Compact Fluorescent)
Wattage
___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts)
Ballast Type
____ S Single Volt
Voltage
____ V1/ 120 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base ____ SF- Fluorescent____ SB- Bi Pin
Cylinder
___ YCLO - Acrylic Clear Cylinder ___ YCLW - Acrylic White Cylinder
___ YCLP - Acrylic Part Frosted Cylinder ___ XXX - Modifier
Material Product Style - Source Wattage / Ballast Voltage / Socket - Cylinder - Refractor / Reflector - CoatingsA LM FNS - IN V1 / SD - YCLO - CMS - CB
AluminumLuminaire Forty Niner Small - Icandescent / S 120 Volts / Medium base -Acrylic Clear Cylinder - Small Chimney -Classic Black Finish
Refractor / Reflectors
___ L63- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ CMS- Small Chimney
Finials
____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
Revision 4/2007
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 95
Sondra Style LuminaireCatalog No.: LMSON
S p e c i f i c a t i o n s
Description
The Sondra style luminaire shall consist of a cast decora-tive base, cage, roof and finial, a socket, and cylinder. Thecylinder and decorative elements as well as optical sys-tems available vary. Details on these options are detailedon the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with a porcelain medium base socket. Seethe following page for more options. All hardware isstainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location. See the fol-lowing page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 2 1/2” High. Consult factory for other tenon sizes.
Revision 4/2007
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 96
OrderingGuide
Revision 4/2007
Material Product Style-
_____ ALMSON Cast Aluminum Luminaire Sondra
Source (Requires a remote mounted ballast for HID)___ IN (Incandescent) ___ XX (Modifier)
___ CP (Compact Fluorescent)
Wattage
___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts)
Ballast Type
____ S Single Volt
Voltage
____ V1/ 120 Volts ____ V/O Unwired
Sockets
____ SD- Medium Base ____ SF- Fluorescent____ SB- Bi Pin
Cylinder
___ YCLO - Acrylic Clear Cylinder ___ YCLW - Acrylic White Cylinder
___ YCLP - Acrylic Part Frosted Cylinder ___ XXX - Modifier
Material Product Style - Source Wattage Voltage / Socket - Cylinder - Refractors/Reflectors - Finial - CoatingsA LM SON - IN V1 / SD - YCLO - CMS - FAV - CB
AluminumLuminaire Sondra- Incandescent/ 120 Volts /Medium base -Acrylic Clear Cylinder - Small Chimney - Stand. Arvida Finial -Classic Black Finish
Refractor / Reflectors
___ ST3- Stacked Reflector Type III___ ST5- Stacked Reflector Type V
___ CMS- Small Chimney
Finials
___ FAV- Standard Arvida Finial ___ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
Grosse Pointe Woods Sm. & Lg.Luminaire
Catalog No.: LMGPS & LMGPL
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 97
S p e c i f i c a t i o n s
Description
The Grosse Pointe Woods Small & Large style luminaireshall consist of a cast decorative base, cage, roof andfinial, a ballast socket assembly, and panels. The panelsand decorative elements as well as optical systems avail-able vary. Details on these options are detailed on the nextpage.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Discharge ballast. The bal-lasts are high power factor core and coil type and areavailable in a wide range of sources and voltages. See thefollowing page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for large luminaire is 2 7/8”Dia. x 3” High. Standard tenon size for small luminaire is3 1/2” Dia. x 3” High. Consult factory for other tenonsizes.
Revision 4/2007Addition 2007
Material Product Style-
_____ ALMGPS Cast Aluminum Luminaire Grosse Pointe Woods Small_____ ALMGPL Cast Aluminum Luminaire Grosse Pointe Woods Large
Source
___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage
___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts)
Ballast Type
____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage
____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base ____ SM- Mogul Base
____ SF- Fluorescent ____ SB- Bi Pin
Globe
___ PBRO - Polycarbonate Clear Globe
___ PBRF - Polycarbonate Fully Frosted Globe
___ PBRP - Polycarbonate Partially Frosted Globe ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 98
Material Product Style - Source Wattage / Ballast Voltage / Socket - Globe - Refractors / Reflectors - Finial - CoatingsA LM GPL - MH100 / Q V1 / SD - PBRO - CML - FBR - CB
Alum. Luminaire Grosse Pointe Woods Lg.- 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Clear Globe -Lg. Chimney - Stand Finial -Classic Black Finish
Refractor / Reflectors
___ CMS- Chimney Small ___ CML- Chimney Large
___ L63- Refractor 6” Type III ___ L65- Refractor 6” Type V
___ L82- Refractor 8” Type III ___ L85- Refractor 8” Type V
___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cut off/V
___ VC3- Vertical Cut off / III ___ VC5- Vertical Cut off / V
___ ST3- Stacked Reflector Type III
___ ST5- Stacked Reflector Type V
Finials
____ FBR-Standard Borough Finial ____ FEG-Eagle Finial
____ FSB- Small Brass Finial ____ XX- Modifier
Modifications
___ HS- House Side Shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Independence Square Style LuminaireCatalog No.: LMIDP
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 99
S p e c i f i c a t i o n s
Description
The Independence Square style luminaire shall consist ofa cast decorative base, cage, roof and finial, a ballast sock-et assembly, and panels and a specular reflector system.The panels and decorative elements as well as optical sys-tems available vary. Details on these options are detailedon the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Discharge ballast. The bal-lasts are high power factor core and coil type and areavailable in a wide range of sources and voltages. See thefollowing page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 1/4”Dia. x 2 1/2” High. Consult factory for other tenon sizes.
Revision 4/2007Addition 2007
Material Product Style-
_____ ALMIDP Cast Aluminum Luminaire Independence Square
Source
___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage
___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
Ballast Type
____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage
____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base ____ SM- Mogul Base
____ SF- Fluorescent ____ SB- Bi Pin
Panels
___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel
___ PRP3 - Polycarbonate RefractiveType III Panel ___ PPLF - Polycarbonate Frosted Panel
___ PRP5 - Polycarbonate Refractive Type V Panel ___ YPLF - Acrylic Frosted Panel
___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel
___ PWHP- Polycarbonate White Panel ___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 100
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Refractors / Reflectors - Finial - CoatingsA LM IDP - MH100 / Q V1 / SD - PPLO - HC3 - FID - CB
Alum Luminaire Independence Square-100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base Clear Poly -Horizontal Cut-off Type/III -Std Finial -Classic Black Finish
Refractor / Reflectors
___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cut off/V
Finials
____ FID- Standard IDP Finial ____ FRG-Franklin Goosneck Finial
____ XXX- Modifier
Modifications
___ BT- Button type photo control
___ TT- Twist Lock photo control (FRG Finial required)
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Marietta Style LuminaireCatalog No.: LMMRT
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 101
S p e c i f i c a t i o n s
Description
The Marietta style luminaire shall consist of a cast deco-rative base, cage, roof and finial, a ballast socket assem-bly, and panels. The panels and decorative elements aswell as optical systems available vary. Details on theseoptions are detailed on the next page.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Discharge ballast. The bal-lasts are high power factor core and coil type and areavailable in a wide range of sources and voltages. See thefollowing page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 3 1/2”Dia. x 3” High. Consult factory for other tenon sizes.
Revision 4/2007Addition 2007
Material Product Style-_____ ALMMRT Cast Aluminum Luminaire Marietta
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel___ PPLF - Polycarbonate Frosted Panel ___ YPLF - Acrylic Frosted Panel___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel___ PWHP- Polycarbonate White Panel ___ YWHP- Acrylic White Panel___ XXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 102
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Refractors / Reflectors - Finial - CoatingsA LM MRT - MH100 / Q V1 / SD - YPLO - L25 - FSA - CB
AluminumLuminaire Marietta - 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Clear Acrylic - 12” Type 5 Refractor - Savannah Finial -Classic Black Finish
Refractor / Reflectors
___ HC3- Horizontal Cut off/III ___ HC3- Horizontal Cutoff/V
___ L22- Refractor 12” Type II ___ L2 5- Refractor 12” Type V
___ L 23- Refractor 12” Type III ___ L82- Refractor 8” Type II
___ L8 5- Refractor 8” Type V ___ L63- Refractor 6” Type III
___ L6 5- Refractor 6” Type V ___ ST3- Stacked Reflector Type 3
___ ST5- Stacked Reflector Type 5 ___ CMS- Chimney Small
___ CML- Chimney Large
Finials
____ FSA-Standard Savannah Finial ____ FGV- Grandview Finial
____ XXX- Modifier
Modifications
___ HS- House side shield ___ BT- Button type photo control
____CP- Ceiling Mount/Pendent ____CL- Ceiling Mount/Chain
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007
Del Mar Sm., Med. & Lg. LuminaireCatalog No.: LMDMS, DMM & DML
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 103
S p e c i f i c a t i o n s
Description
The Del Mar Small, Medium and Large style luminaireshall consist of a cast decorative base, cage, roof andfinial, a ballast socket assembly, and panels. The panelsand decorative elements as well as optical systems avail-able vary. Details on these options are detailed on the nextpage.
Dimensions
The luminaire’s overall dimensions are detailed on thenext page. The height varies depending on finial options.
Material
The luminaire material is heavy wall cast aluminum alloyANSI 356 per A.S.T.M. B26. The luminaire is most com-monly supplied with either a porcelain medium or mogulbase socket. See the following page for more options. Allhardware is stainless steel. All components are UL listed.
Light Source
Luminaires are UL listed for wet location and are fur-nished as required with a High Discharge ballast. The bal-lasts are high power factor core and coil type and areavailable in a wide range of sources and voltages. See thefollowing page for more detailed information.
Installation
The luminaires are designed to mount over a tenon and aresecured to the tenon using several stainless steel setscrews. Standard tenon size for this luminaire is 2 7/8”Dia. x 3” High. Consult factory for other tenon sizes.
Revision 4/2007Del Mar Medium Luminaire Addition 2007
Material Product Style-_____ ILMDMS Cast Iron Luminaire Del Mar Small
(Note: Del Mar Small 175 watt Maximum)
_____ DLMDMM Cast Ductile Iron Luminaire Del Mar Medium _____ ALMDML Cast Aluminum Luminaire Del Mar Large
Source___ HP (High Pressure Sodium) ___ IN (Incandescent) ___ ID (Induction)
___ MH (Metal Halide) ___ XX (Modifier)
___ CP (Compact Fluorescent) ___ LP (Low Pressure Sodium)
Wattage___ 028/ (28 Watts) ___ 032/ (32 Watts) ___ 035/ (35 Watts)
___ 042/ (42 Watts) ___ 050/ (50 Watts) ___ 070/ 70 Watts)
___ 075/ (75 Watts) ___ 100/ (100 Watts) ___ 150/ (150 Watts)
___ 175/ (175 Watts) ___ 200/ (200 Watts) ___ 250/ (250 Watts)
Ballast Type____ S Single Voltage ____ D Dual Voltage120/240
____ T Two Voltage 120/277 ____ Q 120/208/240/277 Quad Voltage
Voltage____ V1/ 120 Volts ____ V8/ 208 Volts ____ V2/ 240Volts
____ V7/ 277 Volts ____ V4/ 480 Volts ____ VO/ Unwired
Sockets
____ SD- Medium Base ____ SM- Mogul Base____ SF- Fluorescent ____ SB- Bi Pin
Panels___ PPLO - Polycarbonate Clear Panel ___ YPLO - Acrylic Clear Panel
___ PPLF - Polycarbonate Frosted Panel ___ YPLF - Acrylic Frosted Panel
___ YSDP - Acrylic Seeded Panel ___ PSTP - Polycarbonate Stippled Panel
___ PWHP- Polycarbonate White Panel ___ YWHP- Acrylic White Panel
___ XXXX - Modifier
SPRING CITY ELECTRICAL MFG. CO., INC.Hall & Main Streets, P. O. Box 19Spring City, PA 19475-0019Phone: 610-948-4000 Fax: 610-948-5577Website: www.springci ty.com
Page: LU 104
Material Product Style - Source Wattage / Ballast Voltage / Socket - Panels - Refractors / Reflectors -CoatingsA LM DMM - MH100 / Q V1 / SD - PPLO - L85 -CB
AluminumLuminaire Del Mar Med. - 100 Watt Metal Halide/ Quadravolt 120 Volts /Medium base -Clear Poly - 8” Refractor Type 5 -Classic Black Finish
Refractor / Reflectors
___ HC3- Horizontal Cut off/III ___ HC5- Horizontal Cut off/V
___ L6 3- Refractor 6” Type III ___ L6 5- Refractor 6” Type V
___ L 82- Refractor 8” Type II ___ L8 5- Refractor 8” Type V
___ ST3- Stacked Reflector III ___ ST5- Stacked Reflector V
___ CMS- Chimney Small ___ CML- Chimney Large
Finials
____ XXX- Modifier
Modifications
___ HS- House Side Shield ___ BT- Button type photo control
Coatings
___ UF Unfinished ___ PO Prime Painted only
___ CB Classic Black Finish ___ BG Bottle Green Finish
___ DB Dark Bronze Finish ___ G I Grey Iron Finish
___ LB Long Beach Blue Finish ___ VG Verde Green Finish
___ CU Custom Powder Finish ___ CW Custom Wet Finish
OrderingGuide
Revision 4/2007