easter jewelry inspiration project-how to make earrings studs out of pearls
DESCRIPTION
In this Easter jewelry inspiration project, you will get to know the steps on how to make earrings studs fit for the theme occasion. It is an easy, quick, cheap and surprisingly made project.TRANSCRIPT
Easter jewelry inspiration project-how to make
earrings studs out of pearls
In this Easter jewelry inspiration project, you will get to know the steps on how to make earrings studs fit for
the theme occasion. It is an easy, quick, cheap and surprisingly made project.
To those who are obsession with the Vintage jewelry,
you deserve this tutorial. It is easy, cheap and at same
time in time for the approaching Easter. By following
such Easter jewelry inspiration project, you are able to
know how to make earrings studs simply out of 4
pieces of pearl beads and 8 of 12/0 Seed beads. Check
it out so!
You’ll need in your Easter jewelry:
4mm pearl bead
3mm pearl bead
12/0 seed bead
Earstud Components
Nylon wire
Glue
How to make earrings studs?
Step1: bead the basic pattern
1. Prepare a 30 cm long wire; Thread four
4mm pearl beads and four 12/0 seed beads
alternately onto the wire. Cross the two tips
through ending pearl bead;
2. Add one 12/0 seed bead onto each wire tip
and then cross through one extra 4mm pearl
bead. Repeat same procedure once more;
3. Slide one 12/0 seed bead onto each tip
again, and then pull the two tips back to the
starting pearl bead and cross through that
bead as picture show;
4. Weave the two tips among beads to make
them came across at one same position. Then
tie a tightly fasten knot. Thread wire tips
through adjacent beads and then trim off
excess portion.
Till now, the Easter jewelry making plan has
finished successfully. As for the pair of Easter
egg earrings is a bit tiny bauble, you’d better
adopt specialized long beading needle for
help. Never thought of this before? Just
follow it and learn how to make earrings
studs for all by yourself.
Getting more fun Earring making inspirations, please click:
www.pandahall.com/learning-center.html
Step2: glue on the earstud
Turn to the back of previous pattern,
apply a little glue on the middle bead and
fill in the 3mm pearl bead and press to
make sure it stay in place. Let it dry and
next you can further glue on the Earstud
in same way.