DYLAN WOMBLE1335 Chelsea Court, Beavercreek, Ohio 45434 ♦ C: 9378231630 ♦ womble.4@wright.edu

Electrical Engineer trained in industrial and system controls and electronic systems. Experience with multiple applicationsranging from FPGA Design, PLC programming, and electrical schematic design.

Bachelor of Science: Electrical Engineering, CurrentWright State University - Dayton, OH

Electrical Engineering Intern, 10/2015 to 02/2016Twist Inc – Jamestown, OH

Learned standards in creating electrical schematics using Solidworks Electrical.Organized the application of a modern control in an old 4-Slide Industrial Machine to fit industrial standards. Experience in electrical hard wiring of control backplates. Developed controlling system for 3-phases' electric motor.Reverse engineered hardware to facilitate documentation.

Solidworks Electrical schematic design experiencePracticed MATLAB userAdvanced electrical circuit knowledgeIntroductory knowledge of C++ programming PLC programming experience in Ladder Logic,Structured Text, and Function Block DiagramPLC programming experience in RSLogix 500 and 5000Creative problem solvingIntermediate Linux OS Experience

Practiced presenterWork extremely well with othersExtremely patientBasic microcontroller knowledgePCB layout designAdvance FPGA Design ExperienceVHDL Coding Experience Advanced Knowledge of Digital Logic DesignMicro Fabrication of Devices Knowledge

Industrial Controls and AutomationExtensive practice with Allen-Bradley PLC's and RSlogix5000 software.Central focus on teaching how to program in ladder logic including advanced work with timers, counters, andmathematical operations. Extensive study on procedures for wiring PLC's.Extensive practice of using I/O and ladder logic code to load programs onto PLCs.Designed and simulated several basic systems in laboratory including basic programming of start-stop switches, garagedoor openers, traffic signals, and assembly line cooling systems.Learned how to create steady state diagrams to simplify coding in ladder logic.Learned how to deploy sensors along with counters to develop systems.Advanced practice in being given complex system and being able to deploy in ladder logic and vice versa.

Circuit Design with PLDs and FPGAsHands on experience with Xilinx FPGAs.Learned knowledge of several different brands of FPGA.Studied advanced combinational and synchronous sequence design.Learned behavioral and structural VHDL coding.Asynchronous circuit design using NCL gates.

PROFESSIONAL SUMMARY

EDUCATION

EXPERIENCE

SKILLS

INDUSTRIAL AND SYSTEM CONTROL EXPERIENCE

DIGITAL CIRCUIT DESIGN WITH FPGA EXPERIENCE

Laboratory work involved with studying using how to balance area and worst case propagation delay parameters in digitalcircuits.Extensive understanding of the inner working in FPGA in the different types of memory storage.Generic CAD tool knowledge

Senior Design ProjectDesigned daughter board compatible with Xilinx ML605 FPGA that will support ADC and DAC chips to preformconversions for FPGA students in their labs.The board needed to support 10-14 bits and speeds of 50-100 MHzSpecific focus on this project involved connection of daughter board to FPGA through FMC connector.

Learned and studied VITA 57.1 Standard for FPGAs to determine pin assignments for device.Successfully made board design in EAGLE's PCB design software.

Industrial Controls ProjectResearched, wrote paper, and created presentation on cyber securities of industrial PLCs.

Included information on dangers that intrusions on systems can cause.Learned standards used to secure these devices.

4-Slide Modern Control ProjectDesigned a modern control centered around an Allen-Bradley Micrologix 1000 PLC to run the essential operations of anolder industrial 4-Slide machine.Facilitated the use of safety measures including emergency stop, proximity guard, and probe fault hard relays to meet allrequired safety standards and concerns.Wired and programmed a variable frequency drive to control the motor speed of machine and facilitate a motor start/stopwith the PLC.

PROJECTS