dust mitigation project queen elizabeths school

16
Dust Mitigation Project Queen Elizabeth’s School

Upload: francis-hood

Post on 18-Jan-2018

223 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Dust Mitigation Project Queen Elizabeths School

Dust Mitigation ProjectQueen Elizabeth’s School

Page 2: Dust Mitigation Project Queen Elizabeths School

The Brief•Design a hand held sweeping device that

will not only sweep up construction debris but will also provide an effective method to provide wetting/dampening of airborne dust & debris.

•Dust: Occupational Health Hazard▫Very Latent effects▫Silicosis epidemic in 20 years?

Page 3: Dust Mitigation Project Queen Elizabeths School
Page 4: Dust Mitigation Project Queen Elizabeths School

Critical Messages1. Dust has become a very serious problem

in the construction industry2. The broom is one of the causes for this

problem3. The solutions so far have not been very

effective or practical4. The shear simplicity of improving the

broom is good

Page 5: Dust Mitigation Project Queen Elizabeths School

Lymington Mews Visit•ERIC PD

•Hazards of water▫Chip Board ▫Electricity

Page 6: Dust Mitigation Project Queen Elizabeths School

Research•Existing Products

•Water pumping systems

Page 7: Dust Mitigation Project Queen Elizabeths School

Final Design

Valve System

Pump System

Page 8: Dust Mitigation Project Queen Elizabeths School
Page 9: Dust Mitigation Project Queen Elizabeths School

T-bar in two pieces

Dispersal system

Milled Shaft Assembled plunger

Page 10: Dust Mitigation Project Queen Elizabeths School

Pumping System

Page 11: Dust Mitigation Project Queen Elizabeths School

Dust Control

•Dry

•Wet

Page 12: Dust Mitigation Project Queen Elizabeths School

Water Dispersal

Page 13: Dust Mitigation Project Queen Elizabeths School

Costs•£12 to produce▫Substantially cheaper than other solutions▫Very cheap to repair and maintain▫Hollow polyethene terephthalate – design

storage container for water. ▫Nylon over polypropylene bristles. (Nylon

priced at £2.65 per unit). ▫Injection moulding 200 brooms per hour.

Page 14: Dust Mitigation Project Queen Elizabeths School

Costs - continued•Wage costs £0.17 per unit,

taking into account time and level of skill combined with legal requirements also followed.

•£0.45 per unit – Injection moulding. Quality and quantity ensured.

Page 15: Dust Mitigation Project Queen Elizabeths School

Conclusions and Future Aims•Meeting the specification•Fitting the brief•Better than the common

solution

• Improvements

Page 16: Dust Mitigation Project Queen Elizabeths School

Sources for this Presentation• Bin the Broom:http://www.wates.co.uk/sites/all/modules/filemanager/files/Publications/Teamtalk_Spring_2014_LOW_RES.pdf (Page 8)• Clean Air Take Care:http://www.safetygroupsuk.org.uk/topics/cleanair.htm • Water gun Picture:http://www.huffingtonpost.co.uk/2014/07/23/best-water-guns_n_3597537.html • Broom Picture:http://www.argos.co.uk/static/Product/partNumber/1914827.htm&sa=U&ved=0CBgQwW4wAWoVChMI5IPCg4WryAIVDGsUCh2kYQY_&usg=AFQjCNErEuO_AuFs6D1uL8VXWMoBwRchkg