ductile iron fittings, dismantling joints and xr iron fittings... · ductile iron fittings,...

Download Ductile iron fittings, dismantling joints and XR iron fittings... · Ductile iron fittings, dismantling

Post on 21-Jul-2018

216 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • www.technimex.com

    Ductile iron fittings, dismantling joints and XRreducers

  • 2 3

    www.technimex.com www.technimex.com

    Technimex is an international supplier of products needed for urban

    infrastructure such as water-, sewage-, and gas distribution.

    Technimex is privately owned and has its headquarter in Ugchelen, the Netherlands.

    Introduction

    Product catalogue

    Products

    Ductile iron fittings acc. to DIN EN545, PN10/16, epoxy coated

    Ductile iron fittings acc. to DIN EN545 push fit socket,

    PN10/16, epoxy coated

    Ductile iron fittings acc. to DIN EN12842 for PVC and PE pipes,

    PN10/16, epoxy coated

    Hatch box

    Dismantling joints

    XR reducers

  • 4 5

    www.technimex.com www.technimex.com

    DIN EN 545 Serie A

    Applied standards:

    Quality management system acc. to DIN EN ISO 9001

    Flange

    DIN-EN 1092-2

    Fittings for ductile iron pipes

    DIN EN 545 Serie A and B

    KIWA approved

    Factory standards

    Coating

    EWS epoxy coating fluidized bath and electro static

    DIN 30677 part 2

    EN 14901

    RAL GZ 662

    Acc. to GSK & KIWA

    PZH Polish approved

    Akzo Nobel powder coating

    Coating colours

    Blue RAL 5017

    Redbrown RAL 3009

    Table of contents

    page

    7

    8

    9

    10

    11

    12

    13

    14-16

    17

    18

    19

    20

    21-22

    23-24

    25

    26

    27

    28-29

    30

    31

    32

    33

    34

    35

    36

    37-38

    39-40

    41

    42

    43

    Type

    FFK 11

    FFK 22

    FFK 30

    FFK 45

    Q

    F

    T

    SCH

    TTO

    FFC

    TT

    FFR

    FFRe

    OMS

    N

    X

    FF

    FFM

    RRK-F

    MMK 11

    MMK 22

    MMK 30

    MMK 45

    MMQ 90

    MMB

    MMA

    MMR

    EU

    MM

    Product information

    Flanged fittings acc. to EN545

    Flanged bend 11

    Flanged bend 22

    Flanged bend 30

    Flanged bend 45

    Flanged bend 90

    Flanged long radius bend 90

    Flanged spigot piece

    All flanged Tee

    All flanged radial Tee

    All flanged level invert Tee

    All flanged angle branch

    All flanged cross

    Flanged concentric taper

    Flanged eccentric taper

    Flanged bellmouth

    90 flanged duckfoot bend

    Blank flange

    Double flanged pipe

    Double flanged pipe with fixed puddle flange

    Flanged hatchbox

    Push fit socket fittings acc. to EN545

    Double socket bend 11

    Double socket bend 22

    Double socket bend 30

    Double socket bend 45

    Double socket bend 90

    All socket Tee

    Flange on double socket Tee

    Double socket taper

    Flange socket piece

    Double socket collar

  • 6 7

    www.technimex.com www.technimex.com

    List of contents

    Table of contents

    page

    44

    45

    46

    47

    48

    49

    50

    51

    52

    53

    54

    55

    56-57

    Type

    MMB-KS

    MMA-KS

    MMR-KS

    F-KS

    E-KS

    EN-KS

    EX-KS

    PN10

    PN16

    PN10

    PN16

    PN10/16

    Product information

    PVC and PE fittings acc. to DIN-EN 12842

    All socket Tee

    Flange on double socket Tee

    Double socket taper

    Flange spigot piece

    Flange socket piece

    90 hydrant duckfoot bend

    End cap

    Double Socket Collar

    Dismantling joints

    F3 type

    F3 type

    F4 type

    F4 type

    XR studded flange reducers

    Flanged bend 11

    FFK-Pieces 11

    PN10/16

    Flanged Bend 11

    Acc. to DIN EN 545

    Type/DN A mm. kg/pce

    FFK-11-DN80 130 9,2FFK-11-DN100 140 11,5FFK-11-DN125 111 21FFK-11-DN150 160 18,6FFK-11-DN200 180 27,5FFK-11-DN250 350 55FFK-11-DN300 400 78FFK-11-DN350 190 83,5FFK-11-DN400 205 108FFK-11-DN450 349 135FFK-11-DN500 375 200FFK-11-DN600 426 268FFK-11-DN700 478 343FFK-11-DN800 529 489FFK-11-DN900 581 622FFK-11-DN1000 632 778FFK-11-DN1200 735 1220FFK-11-DN1400 835 1643FFK-11-DN1600 940 2338

  • 8 9

    www.technimex.com www.technimex.com

    List of contents

    Flanged Bend 22

    FFK-Pieces 22

    PN10/16

    Flanged Bend 22

    Acc. to DIN EN 545

    Type/DN A mm. kg/pce

    FFK-22-DN80 130 9,2FFK-22-DN100 140 11,5FFK-22-DN125 105 16FFK-22-DN150 160 18,6FFK-22-DN200 180 27FFK-22-DN250 350 54,5FFK-22-DN300 400 77,5FFK-22-DN350 210 91FFK-22-DN400 239 128,8FFK-22-DN450 349 155FFK-22-DN500 375 202FFK-22-DN600 426 335FFK-22-DN700 476 342FFK-22-DN800 529 490FFK-22-DN900 581 588FFK-22-DN1000 632 773FFK-22-DN1200 735 1213FFK-22-DN1400 835 1635FFK-22-DN1600 940 2235

    Flanged Bend 30

    FFK-Pieces 30

    PN10/16

    Flanged Bend 30

    Acc. to DIN EN 545

    Type/DN A mm. kg/pce

    FFK-30-DN80 130 10FFK-30-DN100 140 11,6FFK-30-DN150 160 18,5FFK-30-DN200 180 27FFK-30-DN250 210 54,5FFK-30-DN300 255 61FFK-30-DN400 183 74FFK-30-DN450 349 122FFK-30-DN500 220 110FFK-30-DN600 309 212FFK-30-DN700 346 350FFK-30-DN800 383 495FFK-30-DN900 420 750FFK-30-DN1000 455 1020FFK-30-DN1200 530 1200

  • 10 11

    www.technimex.com www.technimex.com

    List of contents

    Flanged Bend 45

    FFK-Pieces 45

    PN10/16

    Flanged Bend 45

    Acc. to DIN EN 545

    Type/DN A mm. kg/pce

    FFK-45-DN80 130 9,3FFK-45-DN100 140 11,3FFK-45-DN125 150 15FFK-45-DN150 160 18,5FFK-45-DN200 180 27FFK-45-DN250 350 54FFK-45-DN300 400 76FFK-45-DN350 298 82FFK-45-DN400 324 106FFK-45-DN450 350 132FFK-45-DN500 375 215FFK-45-DN600 426 264FFK-45-DN700 478 335FFK-45-DN800 529 444FFK-45-DN900 581 582FFK-45-DN1000 632 757FFK-45-DN1200 750 1187FFK-45-DN1400 775 1599FFK-45-DN1600 845 2273

    Flanged Bend 90

    Q-Pieces 90

    PN10/16

    Flanged Bend 90

    Acc. to DIN EN 545

    Type/DN A mm. kg/pce

    Q-DN50 150 8Q-DN65 160 9Q-DN80 165 9,7Q-DN100 180 11,9Q-DN125 200 17,6Q-DN150 220 20Q-DN200 260 30,5Q-DN250 350 49Q-DN300 400 69Q-DN350 450 96Q-DN400 500 126Q-DN450 550 160Q-DN500 600 210Q-DN600 700 325Q-DN700 800 423Q-DN800 900 630Q-DN900 1.000 820,6Q-DN1000 1.100 998Q-DN1200 1.300 1573Q-DN1400 1.270 1943Q-DN1600 1.270 2524

  • 12 13

    www.technimex.com www.technimex.com

    List of contents

    Flanged long radius bend 90

    Flanged long radius bend 90

    PN10/16

    Acc. to DIN EN 545

    Type/DN A mm. kg/pce

    DN 80 380 13,8DN100 400 18DN150 450 30DN200 500 45,5DN250 550 65DN300 600 89,5DN350 650 121DN400 700 157DN450 750 208DN500 800 252DN600 900 420

    Flanged spigot piece

    F-Pieces

    PN 10/16

    Flange Spigot Pipes

    Acc. to DIN EN 545

    Type/DN A mm. kg/pce

    F- 80 350 7,3F-100 360 8,7F-125 370 12F-150 380 13,6F-200 400 19,7F-250 420 27,5F-300 440 38F-350 450 55F-400 480 66,6F-450 500 74,2F-500 520 94F-600 560 133,6F-700 600 218F-800 600 254F-900 600 320F-1.000 600 402F-1.200 600 567F-1.400 710 818F-1.600 780 1143

  • 14 15

    www.technimex.com www.technimex.com

    List of contents

    All Flange Tee

    T-Pieces

    PN 10/16

    All Flange Tee

    Acc. to DIN EN 545

    Type/DN L mm. H mm. kg/pce

    T-DN50/50 300 150 13T-DN80/50 330 160 14,8T-DN80/80 330 165 15,6T-DN100/50 360 170 18,4T-DN100/80 360 175 18,4T-DN100/100 360 180 19,3T-DN125/50 400 185 20T-DN125/80 400 190 24,8T-DN125/100 400 195 24,6T-DN125/125 400 200 28,5T-DN150/50 440 200 29T-DN150/80 440 205 28,5T-DN150/100 440 210 29,5T-DN150/125 440 215 34T-DN150/150 440 220 32,5T-DN200/80 520 235 41,5T-DN200/100 520 240 42,5T-DN200/150 520 250 45,5T-DN200/200 520 260 49T-DN250/80 700 265 65T-DN250/100 700 275 67T-DN250/150 700 300 70T-DN250/200 700 325 75T-DN250/250 700 350 81T-DN300/80 800 290 91T-DN300/100 800 300 93T-DN300/150 800 325 95,5T-DN300/200 800 350 101T-DN300/250 800 375 108T-DN300/300 800 400 117

    T-Pieces

    PN 10/16

    All Flange Tee

    Acc. to DIN EN 545

    Type/DN L mm. H mm. kg/pce

    T-DN350/80 850 325 120T-DN350/100 850 325 121T-DN350/150 850 325 123T-DN350/200 850 325 128,2T-DN350/250 850 325 115T-DN350/300 850 425 158T-DN350/350 850 425 153T-DN400/80 900 350 166,4T-DN400/100 900 350 168T-DN400/150 900 350 155T-DN400/200 900 350 159T-DN400/250 900 350 161T-DN400/300 900 450 177T-DN400/400 900 450 194T-DN450/80 950 375 187T-DN450/100 950 375 203T-DN450/150 950 375 199T-DN450/200 950 375 193T-DN450/250 950 375 213T-DN450/300 950 475 213T-DN450/350 950 475 221T-DN450/400 950 475 236,2T-DN450/450 950 475 237T-DN500/80 1.000 400 237T-DN500/100 1.000 400 241T-DN500/150 1.000 400 241T-DN500/200 1.000 400 296,6T-DN500/250 1.000 400 288,6T-DN500/300 1.000 500 258T-DN500/500 1.000 500 304

    All Flange Tee

    T-DN600/80 1.100 450 349T-DN600/150 1.100 450 379T-DN600/200 1.100 450 380T-DN600/300 1.100 550 439T-DN600/450 1.100 550 444T-DN600/500 1.100 550 408T-DN600/600 1.100 550 491

    Type/DN L mm. H mm. kg/pce

  • 16 17

    www.technimex.com www.technimex.com

    List of contents

    All Flange Tee

    T-Pieces

    PN 10/16

    All Flange Tee

    Acc. to DIN EN 545

    All Flange Radial Tee

    SCH-Pieces

    PN 10/16

    All Flange Radial Tee

    Acc. to DIN EN 545

    We can supply up till DN1200.

    Type/DN L mm. H mm. kg/pce

    T-DN700/80 518 510 255T-DN700/100 540 510 275T-DN700/125 570 515 275T-DN700/150 600 520 275T-DN700/200 650 525 276T-DN700/250 705 530 340T-DN700/300 760 540 348T-DN700/350 815 550 350T-DN700/400 870 555 379T-DN700/500 980 570 470T-DN700/600 1200 585 535T-DN700/700 1.200 600 548T-DN800/100 670 580 356T-DN800/150 635 580 356T-DN800/200 690 585 380T-DN800/250 745 590 456T-DN800/300

Recommended

View more >