drying - wood sa & timber times · blowers angus engineering cfw industries • a full range of...

Dry

ing

2097

5 Fo

rest

201

3

Dry

ing

24197 Forest 2015

Blowers

Angus EngineeringCFW Industries

A full range of fans for dust extraction •plants, drying kilns, axial flow fans, greenhouse fans, centrifugal fans, etcHardwood drying kilns, fans, kiln •circulation fans, high-temperature fans, heat pump systems, heat and vent systems, customised solutions, etcSheet metal and engineering including •rotary valves, cyclones, ducting, screw conveyors, etc

Nukor GroupRailtraction EngineeringSmithco ManufacturingTF Design

Boilers and furnaces

Angus EngineeringBes Bollmann

Developing and realizing quality drying •solutions that add value to the wood and timber products of our customers

Kara Energy SystemsNew Century Sawmill Solutions Nukor Group TF DesignWood Industry Supplies

Cogeneration – see Biomass and cogeneration

section

Dehumidifiers

Bes Bollmann Developing and realizing quality drying •solutions that add value to the wood and timber products of our customers

CFW Industries A full range of dust control equipment •from portable dust units to centralised dust plants incorporating cyclones, rotary valves, binsA full range of fans for dust extraction •plants, drying kilns, axial flow fans, greenhouse fans, centrifugal fans, etcHardwood drying kilns, fans, kiln •circulation fans, high-temperature fans, heat pump systems, heat and vent systems, customised solutions, etcSheet metal and engineering including •rotary valves, cyclones, ducting, screw conveyors, etc

CPB Import/Export Woodworking MachineryCreative EquipmentIncomac S.r.lKara Energy SystemsNew Century Sawmill Solutions Nukor GroupTF Design

Dryers – bed

Nukor GroupTF Design

Dryers – heat and vent (electrical)

Incomac S.r.lNukor GroupTF Design

Dryers – heat pumps

Incomac S.r.lNukor GroupTF Design

Dryers – solar

Nukor GroupSolar Dryers AustraliaTF Design

Drying contractors

TF DesignTimbersoft

Fans

Angus EngineeringKiln fans, any type and any size, sourced •from the best supplier for the job.Axial fans (plate and cased), centrifugal •fans and any other as required for the application.

Bes Bollmann Developing and realizing quality drying •solutions that add value to the wood and timber products of our customers

CFW IndustriesA full range of dust control equipment •from portable dust units to centralised dust plants incorporating cyclones, rotary valves, bins, etcA full range of fans for dust extraction •plants, drying kilns, axial flow fans, greenhouse fans, centrifugal fans, etcHardwood drying kilns, fans, kiln •circulation fans, high-temperature fans, heat pump systems, heat and vent systems, customised solutions, etcSheet metal and engineering including •rotary valves, cyclones, ducting, screw conveyors, etc

CMC GroupIncomac S.r.lKara Energy SystemsMultisawNukor GroupRailtraction EngineeringSmithco ManufacturingTF Design

Gasification plants – see Biomass and cogeneration

section

Heat and cogeneration – see Biomass and cogeneration

section

Heat exchangers

Angus EngineeringBes Bollmann


Incomac S.r.lKara Energy SystemsMultisawNew Century Sawmill Solutions Nukor Group TF Design

Instrumentation/kiln control systems

Angus EngineeringKiln control equipment to suit •applicationComputer aided kiln control •instrumentation

Bes Bollmann Developing and realizing quality drying •solutions that add value to the wood and timber products of our customers Top quality kiln control systems for all •types of drying needs, drying solutions and drying kilns

Incomac S.r.lKara Energy SystemsMultisawNew Century Sawmill Solutions Nukor Group Solar Dryers AustraliaTF DesignTimbersoft

Supply of Pine and Eucalyptus drying •kilnsSupply of drying solutions through kiln •instrumentation and setup of optimum drying schedules

Kiln components

Angus EngineeringThe correct components are sourced to •suitHeat exchangers, door seals and trolley •wheel bushes, etc

Barry Collier & CoBes Bollmann


CFW IndustriesA full range of dust control equipment •from portable dust units to centralised dust plants incorporating cyclones, rotary valves, bins, etcA full range of fans for dust extraction •plants, drying kilns, axial flow fans, greenhouse fans, centrifugal fans, etcHardwood drying kilns, fans, kiln •circulation fans, high-temperature fans, heatpump systems, heat and vent systems, customised solutions, etcSheetmetal and engineering including •rotary valves, cyclones, ducting, screw conveyors, etc

Hildebrand Holztechnik GmbHIncomac S.r.lKara Energy SystemsMultisawNukor Group

Forestry & Sawmilling Directory 2015

Drying

337

Kiln components (continued)

Solar Dryers AustraliaTF DesignWood-Mizer Southern Africa

Kilns – compartment

Angus EngineeringBarry Collier & CoBes Bollmann

Developing and realizing quality drying •solutions that add value to the wood and timber products of our customers Various types of kilns such as timber •drying kilns, high temperature kilns, heat treatment chambers (ISPM 15), steaming kilns

CPB Import/Export Woodworking MachineryHildebrand Holztechnik GmbH Kara Energy SystemsMultisawNew Century Sawmill Solutions Nukor Group TF DesignTimbersoft

Kilns – controlflow

Multisaw

Kilns – conventional



CPB Import/Export Woodworking MachineryHildebrand Holztechnik GmbH Incomac S.r.l

Kilns – gas

Barry Collier & CoIncomac S.r.lNew Century Sawmill Solutions Nukor Group

Kilns – green

Bes Bollmann Developing and realizing quality drying •solutions that add value to the wood and timber products of our customers Various types of kilns such as timber •drying kilns, high temperature kilns, heat treatment chambers (ISPM 15), steaming kilns

Hildebrand Holztechnik GmbHIncomac S.r.l

Kilns – IDV

Incomac S.r.l

Kilns – pallet

Bes Bollmann Developing and realizing quality drying •solutions that add value to the wood and timber products of our customers Various types of kilns such as timber •drying kilns, high temperature kilns, heat treatment chambers (ISPM 15), steaming kilns

Incomac S.r.l

Kilns – progressive



Hildebrand Holztechnik GmbH Incomac S.r.lKara Energy SystemsMultisawNew Century Sawmill Solutions Nukor GroupTF DesignTimbersoft

Kilns – solar

Barry Collier & CoNukor GroupTF Design

Kilns – steaming (for veneer logs)



Incomac S.r.lNew Century Sawmill Solutions Nukor Group

Kilns – thermally modified timber

Multisaw

Kilns – vacuum



Hildebrand Holztechnik GmbH New Century Sawmill Solutions Nukor Group WTT

Manufacture of accelerated vacuum •drying kilns for hardwood and high dimensional construction softwoods. More than 30 years experience

Moisture analyser – in-line

Automation & ProtectionMultisaw

Moisture meters

Angus EngineeringAutomation & ProtectionBes Bollmann

Developing and realizing quality •drying solutions that add value to the wood and timber products of our customers Comprehensive assortment of •professional meters for measuring and controlling

Incomac S.r.lKara Energy SystemsMultisaw

Moisture meters – hand held

Alternative StructuresDelmhorst meters (repair and •maintenance)Moisture meters for all types of materials•

Angus EngineeringAutomation & ProtectionBarry Collier & CoBes Bollmann

Developing and realizing quality drying •solutions that add value to the wood and timber products of our customers Comprehensive assortment of •professional meters for measuring and controlling

Incomac S.r.lKara Energy SystemsNukor Group TF Design

Moisture meters – in kiln


Developing and realizing quality drying •solutions that add value to the wood and timber products of our customers Comprehensive assortment of •professional meters for measuring and controlling

Incomac S.r.lKara Energy SystemsMultisaw


Drying

338

New Century Sawmill Solutions Nukor Group

Moisture scanners – in line

Angus EngineeringBarry Collier & CoBes Bollmann New Century Sawmill Solutions Nukor GroupTF Design

Moisture scanners – in kiln

Angus EngineeringBarry Collier & CoNukor GroupTimbersoft

Spark detection systems

Automation & Protection

Spark/fire detection systems

Automation & Protection

Steam baths

Bes Bollmann Incomac S.r.lNew Century Sawmill Solutions Nukor GroupTF Design

Steam generators

Bes Bollmann Incomac S.r.lNew Century Sawmill Solutions Nukor GroupTF Design

Steam traps

Bes Bollmann Industrial Steam Products

Market, manufacture and install Maxiflo condensate removal •system

Kara Energy SystemsMultisaw

Trolleys

Angus EngineeringBes Bollmann GeerlingsInvestage 9 t/a Allan BrosKara Energy SystemsNew Century Sawmill Solutions Nukor GroupTF Design


Drying

339

2270

8 W

ood

06/2

013


Drying

340

Boilers and furnaces

NUKOR hOllaNdKara boilers

Three pass boiler withunderfeed system for wet fuels

rotary valve+

stoker screw

gas- oroil-burner

rotary valve+

stoker screw

Vertical three pass boiler withunderfeed system for dry fuels

rotary valve+

stoker screw

horizontal three pass boiler withunderfeed system for dry fuels

Three pass boiler with moving gratefor fuels with a high ash content

ash discharge system

Three pass boiler with underfeed system for wet fuels

rotary valve+

stoker screw

gas- oroil-burner

Three pass boiler with moving grate for fuels with a high ash content

ash discharge system

Vertical three pass boiler with underfeed system for dry fuels

horizontal three pass boiler with underfeed system for dry fuels

rotary valve+

stoker valverotary valve

+stoker valve

1. Wood Chip Silo2. Silo Outfeeder and Drive3. Intermediate Chip Hopper with Level Control4. Screw Conveyor with Adjustable Speed Drive5. Right-Angle Discharge Section with Safety Valve6. Rotary valve7. Stoker Feed-Screw8. Retort and Combustion Air-Box9. Combustion Air Fan

10. Triple-Pass Boiler11. Feed-Door for Waste Wood and Off-cuts12. Grit Arrester13. Induced Draught Fan14. Insulated Chimney15. Provision for Optional Oil- or Gas-boiler16. Sprinkler Protection17. Electrical Control Panel18. Base Frame

NUKOR hOllaNdKara boilers and furnaces

1

2

3

4

5

16

11

17 10 9

14

13

12

18

6 7 8

Design and installation of steam boilers and dutch ovens. Boiler system operate on sawmill waste. PLC or PC-based control systems are offered on installations.

TF dESIGN RSaSteam boiler systems

Dehumidifiers

Design and installation of compartment kiln systems for drying hardwood timbers. Dehumidifier system used with sophisticated control system. Each kiln system developed for specific client’s needs.

TF dESIGN RSaCompartment kiln - dehumidifier

Design and installation of dehumidifier units for drying timber. Systems designed to fit the client’s required drying capacity. Capacity of units range from 150 to 1000 litres per 24 hour period.

TF dESIGN RSadehumidifiers

Dryers - heat pump system

The system with Heat Pump is characterized by the use of electricity, as a source of energy.

Being a Heat Pump, the consumed electric energy is very low. If we compare it to the air conditioning or the refrigeration, the consumed energy is total, because we use both the produced cold, to condense the water coming out from the wood and the heat, to warm the wood itself

hINTECh ITalyINCOMaC Mac line


Drying

341

Fans

CMC GROUp TaIwaNSmartek 7,5 to 30 kw yhC cyclone fans

ModelMotor powerAir deliveryAir speedInlet sizeOutlet sizeFan diameterAir pressureOverall dimensions

Net weight

7,5 kw7,5 kW

9 816 m3/h30,3 m/s

ø 350mm300 x 300 mm

450 mm1 666 pa

1 200 x 1 100 x 900 mm

278 kg

11 kw11 kW

13 800 m3/h31,3 m/s400 mm

350 x 350 mm530 mm

2 009 pa1 320 x 1 180 x

1 000 mm304 kg

15 kw15 kW

17 520 m3/h30,5 m/s450mm

400 x 400 mm610 mm

2 303 pa1 500 x 1 230 x

1 100 mm434 kg

18,5 kw18,5 kW

21 600 m3/h30,0 m/s

ø 500 mm450 x 450 mm

680 mm2 499 pa

1 560 x 1 260 x 1 120 mm

490 kg

22 kw22 kW

27 180 m3/h30,2 m/s

ø 550 mm500 x 500 mm

760 mm2 724 pa

1 730 x 1 530 x 1 400 mm

550 kg

30 kw30 kW

32 640 m3/h30 m/s

ø 600 mm550 x 550 mm

960 mm2 940 pa

1 930 x 1 530 x 1 430 mm

675 kg

Motor (kW) 3Diameter (mm) 800Capacity (m3 air) 30 000 Fans are designed according to customer requirements

NUKOR aUSTRIaMühlböck fans

Design and installation of air circulation systems in drying chambers. Supply fully reversible impellers that reduce operating costs dramatically.

TF dESIGN RSaair circulation systems

Design and installation of steam heat exchanger systems in drying chambers. A wide selection of materials for the tubing and fins are offered.

Each heat exchanger is designed according to operating conditions and required capacity using optimisation software.

TF dESIGN RSaheat exchangers

Instrumentation/kiln control systems

IntelliVent® is a control system from Mühlböck which constantly adapts the speed of the ventilating fans to drying. IntelliVent® has no rigid speed setting. IntelliVent® decides on the basis of the optimum quantity of air.

• Kilnclimate• Heatingconditionand• Woodstacking• Between20%and50%ofelectricalenergyissavedby

IntelliVent®, depending on the type of timber and the dimensions, without the quality and drying time suffering.

NUKOR aUSTRIaMühlböck IntelliVent® for less electricity with a constant quality

Heat exchangers

Design and installation of kiln control systems for the timber industry. All systems include customised data acquisition and reduction software. Each control system developed for specific client’s needs.

TF dESIGN RSaInstrumentation


Drying

342

Kiln components

Swinging door(One or two sections) simple and economical, specially suitable for track loaded dry kilns.

Sliding doorsSpace saving, easy to move and operate manually.

hoist lifted doorsUsed for large kiln opening up to width of 14 m operated either manually or by power winch. Includes a safety drop device. This door design is also suitable for progressive dry kilns.

BaRRy COllIER & CO GERMaNyBrunner hildebrand kiln doors

Folding doors(3-6 sections). Inexpensive solution for large dry kilns

lifting-sliding doorsManual or power operated, suitable for multi kiln installations, excellent sealing is achieved by using the weight of the door

lifting-folding doorsSuitable for installations where space saving is important. Doors operate with the help of a counter weight and are counter balanced in all positions for safety

BaRRy COllIER & CO GERMaNyBrunner hildebrand kiln doors

In addition to complete kiln systems, Mahild also offers individual components and systems engineering.

Components include:- Heat exchangers- Fans- Control systems

MUlTISaw GERMaNyMahild - Kiln components

2051

6 W

ood

04/2

012


Drying

343

Kiln components (continued)

Design and installation of steam pipelines and steam control systems. Finite element analyses are used for the structural design of lines and supports. All steam pipe design and installation is in compliance with the OSC ACT. PLC or PC based control systems are offered on installations.

TF dESIGN RSaprocess lines and steam piping systems

Kilns – compartment

The compact kiln BTC, is suited for small wood working facilities. The basic model has an expandable capacity of 762 bm.

The kiln can be either direct fired by gas or oil, or heated with hot water, steam, hot oil or electricity

BaRRy COllIER & CO GERMaNyBrunner hildebrand BTC Compact kiln

The HTR forklift loadet kilns are available with door width up to 16,8 m and capacities of 36 580 bm. The large capacity HTR dry kiln with reversible fans is the most popular day kiln on the market. It is available as an individual compartment or as several kiln compartments, sharing common walls. The lifting-sliding doors are a easy to open and close and use very little space. Other door designs are also available. Most of these kilns are controlled by our high performance computer systems.

BaRRy COllIER & CO GERMaNyBrunner hildebrand hTR forklift loaded kiln

Brunner-Hildebrand supplies this standard kiln HTS for stacks of up to 1,5 m wide and 3 m high and any required length. An attractive price results from standardised mass production. This kiln has very low operating costs. The kiln is available for both, hardwoods and softwoods. It uses a double swinging door and can be heated with usual heating systems and use various different types of control systems. Additional kilns can be added without major modification

BaRRy COllIER & CO GERMaNyBrunner hildebrand hTS Standard kiln

AcceleratedDryKilnsforcapacitiesfrom30m3toover300m3withsingle,double,ortripletrackdesign,withdoorsononeorboth ends of the kiln. Each unit custom-designed and engineered for the specific situation of the customer. The way for cost oriented drying production.

Experience which pays back.

MUlTISaw GERMaNyMahild - accelerated dry kilns

Windsor High Temperature kilns can be designed to operate at temperatures up to 200oC. These elevated temperatures allow plantation pine to be dried for structural timber applications in 4 - 24 hours depending upon the drying schedule.

NEw CENTURy SS windsor hT kilns NEw zEalaNd


Drying

344

Kilns – compartment (continued)

Windsor MTS kilns will provide quality drying at schedule temperatures up to 110oC. These kilns have internal motors, high airflow and relatively high operating temperatures providing economic, good quality drying of plantation softwood species for both structural and appearance grades.

NEw CENTURy SS windsor MTS kilns NEw zEalaNd

A sophisticated drying process, perfected by Mühlböck. Tried and tested thousands of times.

Extensive accessories of the different drier types •Designed for the drying of coniferous or deciduous wood•All sizes, for kiln batches up to 1,000 m³ and in a •standard range of 60 to 165 m³ useful content for the most common timber lengths.

NUKOR aUSTRIaMühlböck conventional drying kilns

To attain shorter drying times, drying kilns can be •equipped with “turbo equipment” and a booster register.The technical possibilities are really converted into fast •dryings processesMühlböck also supplies the pertinent drying time tables.•For the optimum timber quality and final moisture •dispersion these lines are additionally equipped with the harmony system.

NUKOR aUSTRIaMühlböck single and double track kilns

Mühlböck pallet driers dries to the regulations of •ISPM 15 (International Standards for Phytosanitary Measures) Fast drying times at an economic price•Drying can be designed for individual demands and •conditions The integrated measuring technique MB 8000 allows the •

automatic, thorough and retraceable documentation of each batch.The recording is done in accordance with the ISO •standard.

NUKOR aUSTRIaMühlböck pallet driers

Design and supply of compartment kilns for sawn timber drying. Horizontal and vertical airflow circulation available. Capacities range from 20 to 120 m3 per drying chamber. Design optimised for client requirements.

TF dESIGN RSaCompartment kilns

Design and installation of compartment kiln systems for drying poles. Each kiln system developed for specific client’s needs.

TF dESIGN RSaCompartment kilns


Drying

345

Kilns – controlflow

Latest MAHILD CONTRALFLOW continuous kilns can provide production of over 100.000 m³/ year/ kiln.

The timber products from MAHILD CONTRALFLOW kilns have extremely uniform final moisture distribution and use upto30%lessthermalenergyconsumptioncomparedtoconventionalcontinuouskilns.

Mahild use Intelligent Multi Zone Control including conditioning phases to allow highest flexibility.

MUlTISaw GERMaNyMahild - Contraflow kilns

Kilns – gas

The TAG line is characterised by the direct use, as a source of energy, of natural gas, GPL gas, or gas oil.

A boiler, outside the kiln, burns the gas in a combustion chamber connected to the stainless steel pipes that constitute the heat exchanger. This is heated by the smokes and by the heat produced in the combustion chamber and it is touched by the air moving inside the chamber, which transfers all the produced heat.

The TAG line is suggested when the client has not the boiler.

hINTECh ITalyINCOMaC TaG line

NewandpatentedHildebrandGreenKilns®technology•Interconnected kiln system for unbeatable energy savings•No extra costs involved•All kiln systems can be retrofitted•

BaRRy COllIER & CO GERMaNyBrunner hildebrand Greenkilns

Kilns – green

The ICD line, is characterised by the use, as source of energy, of a thermal fluid as: hot water, overheated water, steam or diathermic oil.

The heat exchangers, manufactured with the help of a WELDER ROBOT, are composed of stainless steel pipes with extruded finning of aluminium.

INCOMAC design office adapts the technical characteristics of the drying units to the customers needs.

hINTECh ITalyINCOMaC – ICd line

Kilns – conventional

Single or double track kilns for optimal softwood drying•Available in medium or high temperature version•Various heat recovery options available for huge energy savings•Proved Hildebrand technology out of 15 000 installations world wide•

BaRRy COllIER & CO GERMaNyBrunner hildebrand single and double track kilns


Drying

346


Progressive kilns are well suited for very high production requirement of softwoods.

A special control and transfer system results in constant high quality drying results

BaRRy COllIER & CO GERMaNyBrunner hildebrand progressive kilns

Kilns – pallet

FAO ISPM 15 norms oblige to sterilise pallets and packing.

INCOMAC designs and manufactures kilns for the obligatory thermal treatment and, if required, for the drying process also.

The kilns are the same for the drying process, in all their variants, but with an electronic and a software that allow to do the thermal treatment at 56°C for 30 minutes, to record and certificate it.

hINTECh ITalyINCOMaC pal lINE

2385

9 W

ood

03/2

014


Drying

347

Design and installation of progressive kiln systems for drying hardwood timber species. Each kiln system developed for specific client’s needs.

TF dESIGN RSaprogressive kilns

Kilns – steaming

They are units suitable for the wood steaming, typical treatment to modify and keep uniform the original colour of some kinds of wood like Beech, Cherry, Walnut, Eucalyptus and so on.

These can have direct or indirect steaming.

The thermal fluid must be either saturated steam or overheated water or diathermic oil.

hINTECh ITalyINCOMaC – VaplINE

Colour nuances can be finely tuned, safely reproducible xeven for lighter shades of woodSteam-proof design in stainless steel xExact temperature distribution xIntelligent automation xExcellent results x

NUKOR aUSTRIaMühlböck steaming kilns

Kilns – thermally modiified timber kiln

High temperature and steam are used to modify the visual and physical properties of timber, allowing for timber to be used in applications for which it would otherwise be unsuitable.

These systems can be offered as stand-alone processes with their own heating systems.

These chambers are designed for temperatures of up to 250°C.

Specially designed control software is available to control and document the entire treatment process.

MUlTISaw GERMaNyMahild - TMT (Thermally modified timber)


Kilns – vacuum

Vacuum kilns are a product of Brunner – Hildebrand for 30 years. The high Vac® - S(S=Standard) has been manufactured since 1990. A new drying and quality improvement technology has been implemented in High Vac®-Master.

The steam pulsation technology switches between regular steam and saturated steam resulting in a continuously

conditioning / brake / reconditioning pattern profile which allows for absolute stress released lumber. The measured and controlled lumber internal steam pressure is responsible for the differentials necessary to assure targeted and controlled moisture drop from the core to shell of the lumber. The useless air pressure of conventional kilns is eliminated.

BaRRy COllIER & CO GERMaNyBrunner hildebrand highVac ® Master


Drying

348

COMBO 100 COMBO 200System microprocessor-moisture meterMethod electric resistorsApplication all known timber species, hygroscopic materials as well as set building materialsIndication multi-informative LCD-displayResolution 0,1%Measuringrange 4-120%(timbermoisture)Timber group compens. standard timber groups automaticallyCorrection storages 2 9Group of build. material 9 9No. of storages formeasured values - 256

COMBO 100 COMBO 200Material temp. compens. manual or from measured valueTemp. measuring range -10 up to + 110oCOperation film keyboardKeyfunctions 14 26Ambient temperature 0 - 45oCDimensions (mm) 18 x 78 x 27 Weight (g) 240 260Battery 9 V E-compound IEC G 6F 22Batterylevelindicator • •Real-timeclock - •Interface - •Statistics - •

NUKOR GERMaNyBollmann computerised moisture meters

Measuring method electrical resistorLength of electrodes 8 mmElectrodes integrated, exchangeableMeasuring range wood building materials 6-44% 0,2-2,0%Application wood, set building wood materials, veneers, materials, plaster, paper, cardboard floor finish, coatingsIndicationtolerance ±1% ±0,05%Battery battery 3 x Cr. 2032 exchangeable

Casing material impact resistant plastic materialAmbienttemperature 0-40%Ambientairhumidity 0-85%Dimensions (mm) 130 x 40 x 21 Weight (g) 98 Period of guarantee 12 monthsColour combinations black - blue

NUKOR GERMaNyBollmann Easy compact moisture meters

Static-safe – protectivecircuit againstcharged material tobe measured Outer casing with holding strips

AutomaticswitchingON/OFF

IntegratedmeasuringelectrodesLCD graphic with direct moisture display

for wood and building materials

Static-safe – protectivecircuit againstcharged material tobe measured

Outer casing with holding strips

LCD graphic with direct moisture display for wood and building materials

Integratedmeasuringelectrodes

AutomaticswitchingON/OFF

Moisture meters

Measuring principle electrical resistanceElectrodes integrated, replaceableContacts 2 x hardened special elecrodes, 9 mm length measureing cap for non-destructive measurementMeasuringrange timber5,0%-48,0%buildingmaterials0,3%- 100,0%(dependingonmaterial)Wood moisture A- woodgroup 3 (standard) B – woodgroup 4 (standard)Displayprecision timber±0,5%

Display LCD 3-digit display 65 symbols (Bar graph/special characters)Self test LCD/calibration/battery statusDimensions 160x53x33 mmWeight 135 g (incl. battery)Ambient temperature -10° C to +60° CDataHold-function yesTemperature compenstaiton with infrared measurement 0° C – 80° C (Easy Comfort only)

NUKOR GERMaNyBollmann Easy plus / Easy Comfort moisture meters

hdI 3.3 hdI 3.10Measuringrange: 4-40% 4-100%Application Wood, wood materials Wood, wood mat., build. mat.Measuring method electric resistor electric resistorDisplay LCD LCDResolution 0,1% 0,1%Timbergroupcompens. • •Temperaturecompens. - •Set switch 1 2

hdI 3.3 hdI 3.10Batterytest • •Instrumenttest - •Battery 9-V-compound batt./IEC 6F 22Dimensions (mm) 140 x 80 x 40 140 x 80 x 40 Weight (g) 210 220

NUKOR GERMaNyBollmann hdI moisture meters

Resistance technology recognised around the world as the most accurate method for measuring moisture.6%-30%moisturerangeAnalogue readoutBuilt-in calibration checkTemperature-stable circuit

Ergonomic case designEasy one-hand operation Includes (1) 9-Volt batteryIncludes sturdy carrying case

NUKOR USadelmhorst J-4 moisture meter

Excellent for x drying light-coloured deciduous woodsAlso larger sizes, fast, within a few days to the desired xfinal moisture levelMühlböck vacuum driers are easy to operate xExcellent drying results and high throughput xVacuum driers ready to be plugged in with a timber xcapacity of from 3 m³

NUKOR aUSTRIaMühlböck vacuum dryer

Kilns – vacuum (continued)


Drying

349

Resistance technology recognised around the world as the most accurate method for measuring moisture.6%-40%moisturerangeDigital readoutAverages up to 100 accumulated readings.Built-in correction for 48 different species.Built-in temperature compensation both fahrenheit and celsius.

Proven micro-controller circuit for increased reliability and accuracy.Easy one hand-operationIncludes (1) 9-Volt batteryIncludes sturdy carrying case

NUKOR USadelmhorst J-2000 moisture meter

Moisture meters (continued)

Resistance technology recognised around the world as the most accurate method for measuring moisture.6%-60%moisturerangeDigital readoutAverages up to 100 accumulated readings.Built-in correction for 48 different species.Built-in temperature compensation both fahrenheit and celsius.

Proven micro-controller circuit for increased reliability and accuracy.Includes (1) 9-Volt batteryIncludes sturdy carrying case

NUKOR USadelmhorst R-2000 moisture meter

Delmhorst RC-1E meter complete with 26E hammerhoused in a durable hardwood case. The RC-1E is the latest in the line of RC models that have been a favourite among dry kiln operators for years. It’s three-rangeanaloguescalemeasures%mcovertherange6-80%

- temperature stable circuit- built-in battery and calibration checks- auto shut-off timer

NUKOR USadelmhorst RC-1E moisture meter in case

Dimension, weight (g) 120 x 60 x 25, 60Sensor dimension (mm) 78 x 45Display LCD - digital, with low battery display and out of accuracy range displayRepetitionaccuracy ±1%displayindicationMeasurementrange 4-20%indicationaccuracy over20%outofaccuracyrangeScanning depth (mm) 13 (min thickness)

Calibration (kg/m3) 6 step wood selection from 370 - 670Temperature range (oC) +5 up to +50 (overheating damages battery)Power 9V Alkaline battery or NiCd AkkuPower consumption ca. 5 mA every use, after 90 sec. shut off automatically

NUKOR aUSTRIaMerlin pin free moisture meters

World first - includes adjustable scanning depth.Wood species Direct - selectable, 01-08 preprogrammed extensibility up to 99 speciesDensity range Adjustable from 0,30 up to 1,10 g/cm3 specific densityScanning depth Direct - selectable 10, 20, 30, 40 mm or adjustable from 1 up to 40 mmCasing Solid aluminium casing with wear-resistant rubber protector

NUKOR aUSTRIaMerlin pin free moisture meters

• Built-inelectrodepins,protectedbyacap,canbeconvertedto‘touchsensor’• Socketforaccessories,including2-pinhead-and-leadforawkwardcorners(supplied),andfortheoptional

deep wall probes, hammer electrode, and touch sensor• Displayby20green,yellowandredlightemittingdiodes,oneofwhichlightsuptoshowvalue,with• High-rangefacility• Includescalibration-check• Digitalversionalsoavailable

NUKOR ENGlaNdprotimeter Mini C moisture meters


Drying

350

Steam traps

Continuous condensate removal•Stainless steel construction•Proven life span since 1990•No moving parts•Low maintenance•

Operating benefitsThe Maxiflo® is a condensate ejector system which harnesses kinetic energy from steam to draw condensate, air and non-condensable gases from process coils, faster than conventional steam traps. This boosts the performance of kilns, which results in higher production output.

INdUSTRIal STEaM pROdUCTS SOUTh aFRICaMaxiflo® ejector system

drying - wood sa & timber times · blowers angus engineering cfw industries • a full range of...

Documents