draft test report - debarbifold-hardware.com/.../2015/09/p15139-signed-final-test-report.pdf ·...
TRANSCRIPT
Test Report
Sponsor:
Debar Limited
Unit 7
Whitehall Properties
Towngate, Wyke
Bradford
BD12 9JQ
CONFIDENTIAL
Report: BMT/MTP/F15139
Report on testing of a bi-folding doorset to BS 6375 Part 1
Issue date: June 2015
1762
Page 1 of 5
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation. This document is confidential and remains
the property of Chiltern International Fire Ltd T/A BM TRADA. The legal validity of this report can only be claimed on the presentation of
the complete report.
Page 2 of 5
Results of Test: BMT/MTP/F15139
Debar Limited Unit 7
Whitehall Properties
Towngate, Wyke
Bradford BD12 9JQ
This document confirms that performance testing was conducted on 11 May 2015. Testing was conducted to the following standard:
• BS 6375 Part 1: 2009 Performance of windows and doors – Part 1: Classification for weathertightness and guidance on selection and specification
The following results were achieved:
Product tested Dewall T1 Timber Bi-Fold Hardware Doorset
Summary of testing procedure Result
Test Standard Classification Standard
Air permeability BS EN 1026: 2000 BS EN 12207: 2000 600Pa (Class 3)
Watertightness BS EN 1027: 2000 BS EN 12208: 2000 200Pa (Class 5A)
Wind resistance BS EN 12211: 2000 BS EN 12210: 2000 1200Pa (Class A3)
Exposure category BS 6375: Part 1: 2009 1200
Air leakage at 50pa was 7.24mᶟ/h positive pressure and 32.25mᶟ/h negative pressure. The perimeter length of opening light was 13.15m.
The results relate only to the specimens tested, as detailed in the technical specification
Issued by: James Bacchus Technical Officer
Authorised by: Lee Grant-Riach Technical Officer
Issue date: 19th June 2015 BM TRADA
Chiltern House, Stocking Lane, Hughenden Valley, High Wycombe, HP14 4ND, UK
Tel: 01494 569800 Fax: 01494 564895
Web: www.bmtradagroup.com Email: [email protected]
This document is confidential and remains the property of Chiltern International Fire Ltd, trading as BM TRADA
1762
The legal validity of this report can only be claimed on presentation of the complete report
Sponsor: Debar Limited Ref: BMT/MTP/F15139
Page 3 of 5
Technical specification Report: BMT/MTP/F15139
Test For: Debar Limited, Unit 7, Whitehall Properties, Towngate, Wyke, Bradford, BD12 9JQ.
Performance testing to BS 6375 Part 1: 2009 was conducted on your doorset on 11 May 2015. The technical specification is detailed below. The specimen was delivered to BM TRADA laboratory on 10 May 2015.
Description of construction The specimen was identified as a Dewall T1 Timber Bi-Fold Hardware Doorset. The overall frame dimensions were 2700mm wide x 2100mm high x 77mm deep and leaves dimensions were 858mm wide x 2018mm high x 66mm thick. The specimen was locked with a removable key.
Door leaves
Material/type Dimensions (mm)
Density (kg/m3)
Stiles Master lock side
Sapele engineered timber* 66 x 113 640*
Slave leaves & master hinge side
Sapele engineered timber* 66 x 78 640*
Rails Sapele engineered timber* 66 x 78 640*
Adhesive Polyurethane emulsion adhesive*
No further details provided by sponsor
- -
Joints Tongue and grooved lap jointed - -
* As stated by sponsor, not checked by laboratory
Door frame
Material/type Dimensions (mm)
Density (kg/m3)
Head Sapele engineered timber* 77 x 73 640*
Jambs Sapele engineered timber* 66 x 81 640*
Tracks Top Debar (Ref. DBE-9008)* fixed with 9No. 4.5 x 20 screws into frame head
24 x 20 -
Bottom Integral with threshold - -
Threshold Debar (Ref. DBE-9004)* aluminium threshold
73 x 20 -
Sub-cill Debar (Ref. DBE-157)* timber sub-cill 150 x 30 -
Joints Tongue and grooved lap jointed with adhesive
- -
Adhesive PVA adhesive* - -
* As stated by sponsor, not checked by laboratory
The legal validity of this report can only be claimed on presentation of the complete report
Sponsor: Debar Limited Ref: BMT/MTP/F15139
Page 4 of 5
Hardware
Make/type Size (mm) Fixing details (dimensions in mm)
Hinges 4No. Debar (Ref. DBTI-250/SA)* silver anodised hinges per leaf
97.5 x 40 2No. 4 x 25 screws, 1No. 4 x 16 self tapping screw and 2No. M5 x 7 machine screws into each leaf and hinged side of frame
Hinge clamp plate
Debar (Ref. DBE-9007)* aluminium extrusion, anodised natural AA25
175 x 58 Clamped to top and bottom hinge joining master leaf to first slave leaf
Locking mechanism
Debar (Ref. DBLK-50)* multi-point lock
22 wide 17No. 4 x 40 screws
Keeps Debar (Ref. DBLK-50)* one piece keep
28 wide 15No. 4 x 20 screws
Shootbolt mechanism
Debar (Ref. DBLK-05)* steel shootbolt lock with Nylon 6 moulded shoots
16Ø Lock secured through handle plates with 2No. M5 x
35 machine screws
Shootbolt
keep
Shootbolts engage into top and bottom tracks
- -
Shootbolt handle
Debar (Ref. DBHL-06)* vivo short turn handle with 7mm spindal
155 lever length
2No. M5 x 35 machine screws
Bottom roller
Debar (Ref. DBA1-251/SA)* Tandem wheel set, guides and hinge unit
65 x 65 Fixed to lower hinge clamp plate with 1No. M10 x 30 bolt
Top guide Debar (Ref. DBSP-252/SA)* guides and hinge unit
65 x 65 Fixed to upper hinge clamp plate with 1No. M10 x 30 bolt
Cylinder Mila (Ref. 4510EHPCM6)* 60 length 1No. M5 x 55 machine screw
Handle Hoppe Atlanta* 120 lever length
2No. 5 x 50 screws
* As stated by sponsor, not checked by laboratory
The legal validity of this report can only be claimed on presentation of the complete report
Sponsor: Debar Limited Ref: BMT/MTP/F15139
Page 5 of 5
Perimeter sealing details
Make/type Size (mm) Location
Leaf Edges 2No. Debar (Ref. DBTI-121)* EPDM extruded contact seal
14 x 5.5 To each edge of leaf stiles only
Debar (Ref. DBTI-125)* co-extruded PVC closing seal with fin
18 x 5.5 To top rail of all leaves and lead edge of master leaf
Debar (Ref. DBAI-141)* fin pile 12.5 x 5 To bottom rail of all leaves
Frame reveal None present - -
Seal continuity Interrupted by hinges only - -
* As stated by sponsor, not checked by laboratory
Glazing for door leaves
Make/type/size (mm) Location
(dimensions in mm)
Glass type & configuration
4 glass, 20 spacer, 4 glass -
Overall size 715 wide x 1920 high -
Sight size 685 wide x 1890 high -
Packers 1No. 100 x 28 x 3 plastic glazing packer All corners and centres of stiles only
Gaskets Debar (Ref. DBTI-126)* self adhesive EPDM foam
Between upstand and glazing
Debar (Ref. DBAI-136)* wedge gasket Between beading and glazing
Beads Sapele engineered timber* 17 x 17 Internally beaded
Bead fixings 42No. 1 x 30 steel pins 40 from all corners and Between 30 minimum and 190 maximum centres
Sealants Silicone backfill To all edges
* As stated by sponsor, not checked by laboratory
REGISTERED IN ENGLAND NO. 3125010