Download - The Tyndall - Bidders Addendum 01

The Tyndall at Robertson HillAddendum 001

22-Jul-15

Contents:1. Tyndall Precon RFI List2. RFI 02 attachment - Concrete Details3. RFI 04 attachment - Finish Schedules4. RFI 05 attachment - Plumbing Schedule5. RFI 06 attachment - Light Fixture Schedule6. RFI 014 attachment - Flush Wood Door Specification7. RFI 015 attachment - Hardware Schedule8. Project Schedule (7.19.15): 6 day work week through concrete structure

markhTypewritten Text*Bidders Note: Bid Date is moved to August 11, 2015 at 2pm.

Job Name:

Job No.:

Drawing Date Date Date Number Initiated Required Completed Answer / Direction

1 CG101 07/13/15 07/20/15

2 GS1.00 07/13/15 07/20/15 07/20/15 50% CD progress sheet GS3.14 was received by WCC on 7/20/15.

3GS3.11, GS3.12 07/13/15 07/20/15

4

A3.01 - A3.40, and Specs 07/13/15 08/01/15 07/20/15 interior finish schedule emailed to WCC 7/20

5 P1.00 07/13/15 08/01/15 07/20/15 plumbing fixture schedule emailed to WCC 7/206 E1.00 07/13/15 08/01/15 07/20/15 light fixture scheduled emailed to WCC 7/20

7

Geotech Report & GS 3.12 07/13/15 08/01/15

8

Geotech Report & GS dwgs. 07/13/15 07/20/15 07/20/15

Answered by Rik Haden 7.20.15: The project geotechnical engineering report does not provide any recommendation for spread footings to support principal column and wall loads. Geotechnical Engineer recommends that straight-sided drilled piers bearing in Stratum III Austin Chalk be used to support the building. Pier diameters and lengths are based on foundation design loads versus combination of prescribed net allowable bearing and net allowable side friction pressures provided in the geotech report.

9 L102 07/13/15 08/01/15

10 L102 07/14/15 08/01/15 07/21/15

Response (Answered) from: Owen Snell (DWG.)Remarks: In earlier drawings we were proposing to salvage the existing tree material for benches and other wood features. The current drawings do not have these designs. We will remove this note for the future submittal, sorry for the confusion.

11Spec 03300 07/14/15 07/20/15 07/20/15

Answered by HPA 7/20/15: The garage will be insulated underneath the units so HPA takes no exception to Level C finish at garage. Owner to verify with contractor the finish level that is expected.

12 Civil 07/14/15 08/01/15

Need approval from Owner or Engineer to use SD35 PVC pipe instead of SDR40. Per Utility Contractor, 18 schedule 40 pipe is not manufactured.

The 03300 Specs call for a Class A finish at areas exposed to public view and Class C for areas not exposed to public view. Are the under-sides of the parking levels considered exposed to public view?

Item #

Note 31 on drawings A3.01 thru A3.40 refers to interior designer finish schedule for finishes, for additional room finish notes and specifications. Please provide.

Is it possible to re-route the 12"/18" storm sewer line currently shown to be outside of the building approximately 15 to 20 feet plan east into the building footprint? This would allow us to schedule this work in one mobilization and excavate for the wall and the storm drain at the same time in lieu of two separate mobilizations and two excavation activities at two different times. This will also alleviate possible soil retention and property line clearance issues.

Please provide a complete light fixture schedule.The Geotechnical Report recommends that the perimeter wall drainage system be designed by the MEP engineer. Structural drawing GS3.12 detail 1 calls for drainage mat & waterproofing (re: architectural). Please provide details and specifications.

Is it feasible to use spread footings in lieu of drilled piers? This could potentially save some money, especially if the piers are required to be 36" dia. X 10 deep. The geotech recommended minimum 24" dia x 4' deep piers. Re: Note 1, sheet L102. Please provide complete MEP drawings, details, and specifications for the 40,000 gallon water harvesting irrigation supply systemRe. Note 1, sheet L102. Please provide locations for 30" and 37.5" post oak trees to be salvaged for re-use - via a plan drawing or marked on site. Also, please provide a drawing showing the location and details of benches where the reclaimed post oak wood is to be utilized.

Preconstruction RFI List

Request / Question

Structural Drawing GS1.00 refers to section 4/GS3.14 but we do not find sheet GS3.14 in plan set. Please provide sheet GS3.14 with referenced details.

Please provide a complete plumbing fixture schedule.

The Tyndall at Robertson Hill

3368

Detail 1 on sheets GS3.11 and 3.12 calls out a perforated collection pipe (RE: Plumbing). Please reference and/or provide a specific plumbing drawing with additional information as needed for pricing, routing, and installation.

Job Name:

Job No.:

Drawing Date Date Date Number Initiated Required Completed Answer / DirectionItem #


Request / Question


3368

13L Series, A Series 07/15/15 07/20/15

14 Spec 07/15/15 07/20/15 07/20/15 wood door default spec emailed to WCC 7/20 KN ADDED15 Spec 07/15/15 07/20/15 07/20/15 hardware schedule emailed to WCC 7/20 KN ADDED

16GS3.11, GS3.12 07/17/15 07/24/15

17A4.10c, E4.11cp 07/17/15 07/24/15

18 Spec 27 07/17/15 07/24/15

19 07/20/15 07/27/15

20 E6.01 07/20/15 07/27/1521 E 07/20/15 07/27/15

22Civil, Arch, MEP, LS 07/20/15 07/27/15

23 MEP 07/20/15 07/27/15

Please identify types and locations for each exterior skin system (ex: dimensioned elevation drawings showing where different skin systems start and stop)

Additional details, elevations, cut sections, specifications for the "green roof" on the 2nd floor are needed. The landscape drawings show the most information but its not real cleararchitectural drawings showing details and sections should follow.Please provide a specification section for Wood DoorsPlease provide a specification section for hardwareDetails 1, 1A on sheets GS3.11 & 3.12 notes a "Drainage Mat & Waterproofing ref: Arch. We cannot find any additional information on the architectural drawings. Please provide detailed dimensional drawings, sections, and specifications as needed for pricing and installation.On sheet A4.10c, the room at the bottom left area of the plan is noted as "Generator". Sheet E4.11cp does not show a generator or that room. Please advise.

We do not find any plans or specs for the low voltage communications cabling. In the specs it indicates division 27 not used. Please advise if this information will be provided.

Riser note 1 calls for underground primary electric system conduits Re: Sheet MPE-? For additional info. Please provide missing sheet. Please provide an electrical load distribution schedule

It is our understanding that the building will be occupied in three separate vertical phases. Please provide drawings showing the demarcation between each phase and which areas make up each phase. For example, if phase 1 is comprised of the Clubhouse, Fitness Center, Sales Office, pool, pool deck, and 1/3 of the units, this will require the specific unit numbers for the 1/3 of the units to be occupied, which elevator(s) will be required for use, specific stair egress routes required, fire separation wall(s) locations between each phase, and any temporary or special fire alarm and fire sprinkler system requirements for certificate of occupancy for each phase.

Fire Protection Contractor question: the definition of a high-rise is a building that exceeds 75ft in height measured from the tires of the fire truck to the floor level of the upper most level. Basically Level 6 floor elev: shows 54 5-1/4. We are not sure of the elevation where the fire truck would sit to access the building which would also be the lowest point. Depending on the answer to this question, it may then require an Automatic Fire Pump, two (2) Fire dept. connections, and an upsized standpipe and drain system. Please advise.

Job Name:

Job No.:

Drawing Date Date Date Number Initiated Required Completed Answer / DirectionItem #


Request / Question


3368

24 07/20/15 07/20/15 07/20/15This is a confirming RFI issued and answered the same day by the Architect.

25Spec 07 81 23 07/21/15 07/28/15

26 GS 0.02 07/21/15 07/28/15

27123661.16 123661.19 07/21/15 07/28/15

28 A4.11a 07/21/15 07/28/152930313233343536


Overhead doors Mark, 111 & 112 at Garage Level 1, partial A, on sheet A4.11a: The specifications call for coiling grilles, but the door schedule spells out insulated service doors. Please clarify which type of overhead opening is required.

On sheet A2.02 (Window Schedule), Windows through are listed out as storefront. These windows are not storefront. They are a series of mulled together thermally broken aluminum windows. We discussed these window options with Thermal prior to issuing this set. looking at the window each column is a double hung window on top of a fixed window. This holds true for all the windows for this section of the schedule. The doors are also fabricated by thermal and integrated into the system. The transom above the doors will be a fixed window. Storefront Windows only happen at the first floor club areas.Spec 07 81 23 requires Intumescent Mastic Fire Resistive Coating System for interior structural steel applications. Please provide drawings and details showing locations where this coating system shall be applied.

Structural Note 9 requires the contractor to coordinate structural steel fireproofing requirements. WCC is not a licensed fire proofer and not qualified to coordinate these requirements nor can it tell what the requirements are based on the current documents. WCC recommends the owner engage the Architect or a Fireproofing Consultant to coordinate and complete the design as it relates to fire proofing requirements for structural steel.Specifications refer to Interior design drawings (none provided) for thickness and edges for stone countertops. Should stone counter top contractors price 2cm or 3cm thick material? Should we price standard eased edge, waterfall, or another type of edging?

RFI Transmittal

Humphreys & Partners Architects, L.P. | 5339 Alpha Road Suite 300 Dallas TX 75240 United States

Page 1 of 2

PROJECT 8TX13469

DATE SENT 7/20/2015

SUBJECT Structural Sheet RFI ID BID 002

TYPE RFI TRANSMITTAL ID 00058

PURPOSE Answered VIA Info Exchange

QUESTION: Structural Drawing GS1.00 refers to section 4/GS3.14 but we do not find sheet GS3.14 in plan set. Please provide sheet GS3.14 with referenced details.

SUGGESTION:

ANSWER: This RFI Response clarifies a question from the General Contractor regarding the Design Intent of the Contract Documents with no anticipated material effect on CONTRACT SUM or TIME. However, if Contract Sum or Time is affected, contact Architects Office immediately for further instructions and disposition of the following directive. July 20, 2015

Response (Answered) from: Rik Haden (Leap!Structures)Remarks:

50% CD progress sheet GS3.14 was forwarded to Kip Clark (WCC) and Kiel Siemonet (HPA) on 7/16 and is attached also here for reference.

FROM

NAME COMPANY EMAIL PHONE

Erik SanchezHumphreys & Partners Architects, L.P.

[email protected] 972.701.9636

TO


Mark Hutton White Construction Company [email protected] 512.583.9243

DESCRIPTION OF CONTENTS

QTY DATED TITLE NUMBER SCALE SIZE NOTES

RFI TransmittalDATE: 7/20/2015

ID: 00058

Page 2 of 2


1 7/20/2015

14014 Tyndall Garage GS3-14 - CONCRETE DETAILS.PDF

COPIES:

Aaron Webb (Matador Project Solutions) Terry Mitchell (Momark Development) Lydia Clay (Momark Development) Ken Harrison (White Construction Company) Jay Darwish (White Construction Company) Diana Wang (Big Red Dog) Kiel Siemoneit (Humphreys & Partners Architects, L.P.) Sionnis Pierre (Humphreys & Partners Architects, L.P.)

1ST LEVEL GARAGE

514' - 0"

GARAGE LEVEL 02

524' - 0"

K

R LEVEL 01 - PODIUM

536' - 0"

CONC. GRADE BM.

REINF. w/ (3) #7 HORIZ. CONT. T&B

#4 HORIZ. CONT. MID EA. FACE

#3 TIES @ 12" O.C.

CMU WALL,

REF. PLAN

CONVENTIONALLY REINFORCED

CONCRETE POUR STRIP, SEE PLAN.

CONT. SHEAR KEY w/

WATER STOP, TYP.

SLAB REINF. NOT SHOWN,

REF. PLAN

1ST LEVEL GARAGE

514' - 0"

GARAGE LEVEL 02

524' - 0"

L

R LEVEL 01 - PODIUM

536' - 0"

CONT. SHEAR KEY

CONT. SHEAR KEY

CONC. GRADE BM.



#3 TIES @ 12" O.C.



CONT. SHEAR KEY w/

WATER STOP, TYP.


REF. PLAN

#7 VERT. @ 12" I.F.

#5 @ 12" O.F.

#4 HORIZ. @ 12" EA. FACE

1ST LEVEL GARAGE

514' - 0"

GARAGE LEVEL 02

524' - 0"

L

R LEVEL 01 - PODIUM

536' - 0"

POND 00

507' - 0"



CONT. SHEAR KEY

CONT. SHEAR KEY

EARTH RETENTION SYSTEM

LAGGING BY OTHERS

DRAINAGE MAT &

WATERPROOFING,

REF. ARCH.

C.I.P. CONC. RETAINING WALL,

SEE 2/S3.11 FOR REINF. CONT.

THRU COLUMN

FLATWORK BY OTHERS,

REF. CIVIL

CONC. GRADE BM.



#3 TIES @ 12" O.C.

CONT. SHEAR KEY w/

WATER STOP, TYP.


REF. PLAN

#7 VERT. @ 12" I.F.

#5 @ 12" O.F.






1ST LEVEL GARAGE

514' - 0"

GARAGE LEVEL 02

524' - 0"

R LEVEL 01 - PODIUM

536' - 0"

POND 00

507' - 0"

F.3

CONC. GRADE BM.



#3 TIES @ 12" O.C.

EARTH RETENTION SYSTEM

LAGGING BY OTHERS

DRAINAGE MAT &

WATERPROOFING,

REF. ARCH.

C.I.P. CONC. RETAINING WALL,

SEE 2/S3.11 FOR REINF. CONT.

THRU COLUMN

FLATWORK BY OTHERS,

REF. CIVIL



CONT. SHEAR KEY

#7 VERT. @ 12" I.F.

#5 @ 12" O.F.






P

R

O

G

R

E

S

S

P

R

I

N

T

R

E

L

E

A

S

E

D

U

N

D

E

R

T

H

E

A

U

T

H

O

R

I

T

Y

O

F

:

E

R

I

K

J

H

A

D

E

N

,

P

.

E

.

T

E

X

A

S

R

E

G

I

S

T

R

A

T

I

O

N

N

o

:

1

0

0

0

1

8

(

N

O

T

I

N

T

E

N

D

E

D

F

O

R

B

I

D

D

I

N

G

,

P

E

R

M

I

T

,

O

R

C

O

N

S

T

R

U

C

T

I

O

N

P

U

R

P

O

S

E

S

)

D

A

T

E

:

SHEET NO.

Issue for Construction

Revisions:

Issue for Permit Application:

Drawn by:

Designed by:

Date Plotted:

#

Issue for Pricing / Bidding:

DATE COMMENTS

SHEET TITLE:

0

7

/

0

9

/

1

5

1 07/09/15 50% CD

CONCRETE DETAILS

GS3.14

07.09.15

T

H

E

T

Y

N

D

A

L

L

A

T

R

O

B

E

R

T

S

O

N

H

I

L

L

E

m

b

a

s

s

y

D

r

i

v

e

A

u

s

t

i

n

,

T

e

x

a

s

7

8

7

0

2

M

o

m

a

r

k

D

e

v

e

l

o

p

m

e

n

t

,

L

L

C

.

00000

SCALE: 3/4" = 1'-0"

Section 751SCALE: 3/4" = 1'-0"



Section 784

RFI Transmittal


Page 1 of 2

PROJECT 8TX13469

DATE SENT 7/21/2015

SUBJECT Finish Schedule RFI ID BID 004



QUESTION: Note 31 on drawings A3.01 thru A3.40 refers to interior designer finish schedule for finishes, for additional room finish notes and specifications. Please provide.

SUGGESTION:

ANSWER: This RFI Response clarifies a question from the General Contractor regarding the Design Intent of the Contract Documents with no anticipated material effect on CONTRACT SUM or TIME. However, if Contract Sum or Time is affected, contact Architects Office immediately for further instructions and disposition of the following directive. July 21, 2015 See attached schedules.

FROM




TO





1 7/21/2015 Tyndall Common Area FFE.XLSX

1 7/21/2015Copy of TYNDALL UNIT SCHEDULE.XLSX


ID: 00065

Page 2 of 2


1 7/21/2015 TYNDALL-PLUMBING.XLSX

COPIES:

Aaron Webb (Matador Project Solutions) Terry Mitchell (Momark Development) Lydia Clay (Momark Development) Ken Harrison (White Construction Company) Jay Darwish (White Construction Company) Kiel Siemoneit (Humphreys & Partners Architects, L.P.) Sionnis Pierre (Humphreys & Partners Architects, L.P.)

TYNDALL AT ROBERTSON HILL: UNIT SCHEDULEJOEL MOZERSKY DESIGN

ITEM LOCATION FROM QTY PPU SHIPPINGDARK OPTION

FLOORING

Wood Floor: 7.5'' Wirebrushed Black Tea European Oak living areas Hardwood Bargains

Carpet: Milliken - Imagine, Stratum - Velour Bedrooms Schroeder Carpet or Milliken

PAINT

SW 7004: Snowbound All walls, ceiling, and cabinets: satin on walls, semi gloss on woodwork Sherwin Williams

SW 7067: Cityscape Cabinet Alternate Paint Color Sherwin Williams

COUNTERTOPS

Caesarstone: 5003 Piatra Grey All countertop locations Caesarstone

TILE

Foundation: Black Kitchen Backsplash Ann Sacks

Grout: 335 Winter Grey Kitchen Tile Custom Building Products

Natucer:10" Hex Tile in Oslo Bathroom Floor and Walls Architerra

Natucer: 9"X10" Tile in Oslo Bathroom Floor and Walls Architerra

Grout: 335 Winter Grey Bathroom Tile Custom Building Products

LIGHTING

Minka Aire: Artemis with light kit - Black All fan Locations Lumens

Beat Stout Light Dining table area (Option 1) Tom Dixon

#46679 Tenley Large Pendant in Bronze Dining table area (Option 2) Arteriors Home


Beat Light tall Kitchen Island (Option 1) France and Son

#74738 Javier Pendant Kitchen Island (Option 2) Arteriors Home

Iifa Modo wall sconce Bathrooms (Option 1) DH gate

Alto Sconce in Modern Black with Opal shade Bathrooms (Option 2) Cedar and Moss

HARDWARE

Lews Hardware Ceramic Collection - 1'' Bishop Knob in Matte Black (LEW-45955)

All knob hardware locations Myknobs.com

Lews Hardware Bar Pull Collection - 3'' Bar Pull 5.0'' O/A Matte Black - (LEW-45928)

All pull hardware locations Myknobs.com

Emtek: Athena Lever - Flat Black US19 All Door lever Locations Emtek

Emtek: Key in Hanover Lever - Flat Black US19 Unit entry doors Emtek

Emtek: Brass Square Style Single Sided Dead Bolt - Flat Black

Front Door Emtek

GRAY OPTION

FLOORING

Wood Floor: Hand Scraped Alaska White Oak Living Areas Hardwood Bargains

Carpet: Milliken, Imagine - Stratum - Denim Bedrooms Schroeder Carpet

PAINT



COUNTERTOPS

Caesarstone: 5003 Piatra Grey All countertop locations Caersarstone

TILE


Foundation: Fox Kitchen Backsplash Ann Sacks


Natucer: Roma Hex Bathroom Floor and Walls Architerra

Natucer: 9"X10" Tile in Roma Bathroom Floor and Walls Architerra


LIGHTING

Minka Aire: Artemis with light kit - Black All fan locations Lumens







HARDWARE







Emtek: Key in Hanover Lever - Flat Black US19 Front Door Emtek


Front Door Emtek

LIGHT OPTION

FLOORING

Wood Floor: Hnad Scraped and Wire Brushed Andora White Oak Living Areas Hardwood Bargains

Carpet: Milliken, Imagine - Stratum - Manilla Bedroom Schroeder Carpet

PAINT



COUNTERTOPS

Caesarstone: 4235 Shitake All countertop locations Caesarstone

TILE

Foundation: Desert Kitchen Backsplash Ann Sacks

Grout:386 Oyster Grey Kitchen Tile Custom Building Products

Natucer: Londres Hex Bathroom Floor and Walls Architerra

Natucer: 9"X10" Tile in Londres Bathroom Floor and Walls Architerra

Grout: 386 Oyster Grey Bathroom Tile Custom Building Products

LIGHTING









HARDWARE








Front Door Emtek

6TH FLOOR

FLOORING

Hardwoods throughout Hardwood Bargains

COUNTERTOPS

Caesarstone Selections All Countertop locations Caesarstone


Carrara MarbleBathroom Countertops if Owner chooses Carrara 3'' Hex on walls and floors in Bathroom

TILE

Foundation Brick Bathroom: walls and floor Ann Sacks

Carrara Marble 3'' Hex Bathroom: all walls and floors

LIGHTING


Mara Large Pendant Dining Area Arteriors Home

IC - S Pendant Kitchen Pendants Lumens

IC - Wall/Ceiling Light Bathroom Sconces Lumens

PAINT



HARDWARE








Front Door Emtek

TYNDALL AT ROBERTSON HILL: COMMON AREAS FFE

JOEL MOZERSKY DESIGN

ITEM LOCATION FROM QTY PPU SHIPPING TOTAL STATUS LOCATION ORDER BY/NOTES

CLUBHOUSE $0.00

$0.00

FLOORING $0.00

Ogassian Concrete, Penta Clubhouse and Conference Rooms Ann Sacks $8.16

$0.00

PAINT $0.00

SW 7004: SnowboundAll walls, ceiling, and cabinets: satin on

walls, semi gloss on woodworkSherwin Williams

$0.00

LIGHTING $0.00

Marimba LED Pendant, white Clubhouse Lumens 4 $659.00

$2,636.00

$0.00

HARDWARE $0.00

FURNITURE $0.00

Bank Mink Velvet 80" Sofa Sofa BluDot 3 $2,070.00

$6,210.00

U Turn Lounge Chairs Design Within Reach 8 $3,357.50

$26,860.00

New Standard Leather Lounge

ChairLounge Chairs by sofa and window BluDot 6 $1,799.00

$10,794.00

Prouve Armchair, black gunmetal

and black leather seatDining Chairs Industry West 8 $175.00

$1,400.00

Sculpted Drum Coffee Table Coffee Table, Round West Elm 2 $340.00

$680.00

Strut Square Coffee Table, black Coffee Table, Square BluDot 1 $270.00

$270.00



Eric Trine Ochtahedron Side

Table, blackSide Table West Elm 2 $255.00

$510.00

Marble Tulip Dining Table, 36" Dining Table France & Son 2 $995.00

$1,990.00

TBD Rug

$0.00

Punk Lamp, Charcoal Lamps BluDot 2 $242.10

$484.20

SMALL CONFERENCE ROOM $0.00

$0.00

FLOORING $0.00


$0.00

PAINT $0.00


walls, semi gloss on woodworkSherwin Williams $0.00

LIGHTING $0.00

Marimba LED Pendant, white conference room fixture Lumens 1 $659.00

$659.00

HARDWARE $0.00

FURNITURE


$1,990.00



$1,400.00

CONFERENCE ROOM $0.00

FLOORING $0.00




$0.00

PAINT $0.00



$0.00

COUNTERTOPS $0.00

Caesarstone: 4030 H Pebble

HonedBar countertop Caersarstone $0.00

LIGHTING $0.00


$659.00

FURNITURE $0.00



$2,450.00

Aegean Dining Table 84" Dining Table Restoration Hardware 2 $1,610.00

$3,220.00

CAVE $0.00

$0.00

FLOORING $0.00

Concrete Cave Floor

$0.00

PAINT $0.00



$0.00

COUNTERTOPS $0.00


HonedAll countertop locations Caersarstone $0.00

TILE $0.00

Diagonal Black and White Cabana Tile Concrete Tile Shop $0.00



122, Linen Cabana Grout Custom Building Products $0.00

$0.00

LIGHTING $0.00

20" Cave Pendants 10 $400.00 $4,000.00

$0.00

HARDWARE $0.00

Lews Hardware Ceramic

Collection - 1'' Bishop Knob in

Matte Black (LEW-45955)

All knob hardware locations Myknobs.com $0.00

Lews Hardware Bar Pull Collection

- 3'' Bar Pull 5.0'' O/A Matte

Black - (LEW-45928)

All pull hardware locations Myknobs.com $0.00

FURNITURE $0.00

TBD Booth Fabric

TBD Booth Upholstery

Side Table

Cradle Barstool, Black Barstool Industry West 8 $135.00 $1,080.00

GYM $0.00

$0.00

FLOORING $0.00

Gym Floor $0.00

PAINT $0.00


walls, semi gloss on woodworkSherwin Williams $0.00

LIGHTING $0.00



Minka Aire: Artemis with light kit -

BlackAll fan locations Lumens $0.00

Emperor Suspension Lamp Hive Modern 8 $2,909.00 $23,272.00

HARDWARE $0.00

WOMEN'S $0.00

FLOORING $0.00


$0.00

WALLS $0.00

Rio, Dove/ Milk Bathroom Walls Ann Sacks $18.00 $0.00

COUNTERTOPS $0.00



LIGHTING $0.00

FIXTURES

Purist Wall Mount Commercial

Bathroom Sink FaucetFaucet Kohler 2 $0.00

Verticyl, white, K-2882-0 Sink Kohler 2 $0.00

Commercial Flushometer High

Efficiency Toilet, 1.28 GPF,

Elongated Bowl

Toilet Toto 3 $0.00

$0.00

$0.00

MEN'S $0.00

FLOORING $0.00


$0.00

PAINT $0.00



$0.00

COUNTERTOPS $0.00





LIGHTING $0.00

FIXTURES

Purist Wall Mount Commercial

Bathroom Sink FaucetFaucet Kohler 2 $0.00


Commercial Flushometer High

Efficiency Toilet, 1.28 GPF,

Elongated Bowl

Toilet Toto 3 $0.00

$0.00

COFFEE BAR $0.00

FLOORING $0.00


$0.00

PAINT $0.00



$0.00

COUNTERTOPS $0.00



LIGHTING $0.00

$0.00

HALLWAYS $0.00

LIGHTING $0.00

103040 - QB LED Wall Sconce,

white, bruck lightingall hall lights Y Lighting $183.75 $0.00

$0.00

MISCELLANEOU

S DCOR1 $20,000.00 $20,000.00

$0.00

TOTAL $110,564.20

RFI Transmittal


Page 1 of 2

PROJECT 8TX13469

DATE SENT 7/21/2015

SUBJECT Plumbing Fixture Schedule RFI ID BID 005



QUESTION: Please provide a complete plumbing fixture schedule.

SUGGESTION:

ANSWER: This RFI Response clarifies a question from the General Contractor regarding the Design Intent of the Contract Documents with no anticipated material effect on CONTRACT SUM or TIME. However, if Contract Sum or Time is affected, contact Architects Office immediately for further instructions and disposition of the following directive. July 21, 2015 See attached schedules

FROM




TO



COPIES:

Aaron Webb (Matador Project Solutions) Terry Mitchell (Momark Development) Lydia Clay (Momark Development) Ken Harrison (White Construction Company) Jay Darwish (White Construction Company) Kiel Siemoneit (Humphreys & Partners Architects, L.P.)


ID: 00064

Page 2 of 2

Sionnis Pierre (Humphreys & Partners Architects, L.P.)

TYNDALL AT ROBERTSON HILL: PLUMBING AND APPLIANCE SCHEDULEJOEL MOZERSKY DESIGN

ITEM LOCATION FROM QTYE1KITCHEN

Brizo Solna Single Handle pull out kitchen faucet Model # 63220LF-Bl in Matte Black

Kitchen Sink Brizo 1

Vault 25" x 22" x 9-5/16" top-mount/under-mount medium single-bowl kitchen sink with single faucet hole

Kitchen Sink Kohler 1

BATH

Brizo Odin Two handle widespread Lav faucet Model # 65375LF-BL in Matte Black

Lav sink Brizo 1

K2215-0 Ladena undermount sink in white Bathroom sink Kohler 1

Brizo Odin Tub Shower- Med Flow Model # T60475-BL in Matte Black

Shower baths Brizo 1

MIREDS6030LWH "Edenton" 60'' x 30'' Shower Tub Mirabelle 1

Evergreen Dual Flush Wash Down 2 Piece Toilet, 1.6 GPF/ 0.8 GPF HET Elongated Bowl, Extended Height ADA Compliant; 5055BXXX-5219

Bathroom Toilet Vitra 1

Odin Tissue Holder, 695075-BL Tissue Paper Holder Brizo 1


ITEM LOCATION FROM QTY

Odin Towel Bar 18" Towel Bar Brizo 1

A1KITCHEN



K-3823-1-NA Vault Double Bowl with single Faucet Hole Kitchen Sink Kohler 1

BATH


Lav sink Brizo 2











A2KITCHEN




BATH


Lav sink Brizo 2






ITEM LOCATION FROM QTYEvergreen Dual Flush Wash Down 2 Piece Toilet, 1.6 GPF/ 0.8 GPF HET Elongated Bowl, Extended Height ADA Compliant; 5055BXXX-5219




A3KITCHEN




BATH


Lav sink Brizo 2











A4KITCHEN




BATH


Lav sink Brizo 1











A5KITCHEN




BATH


Lav sink Brizo 2











B1KITCHEN




BATH




Lav sink Brizo 4









B2KITCHEN






BATH


Lav sink Brizo 4









B3KITCHEN






BATH


Lav sink Brizo 3





Odin Shower Only- Medium Flow Shower Faucet Brizo 1







B4KITCHEN




BATH


Lav sink Brizo 3












B5KITCHEN




BATH


Lav sink Brizo 3












B6KITCHEN




BATH




Lav sink Brizo 4










B7KITCHEN






BATH


Lav sink Brizo 3












P1KITCHEN




BATH


Lav sink Brizo 5












P2KITCHEN




BATH


Lav sink Brizo 5












P3KITCHEN




BATH




Lav sink Brizo 5










P4KITCHEN






BATH


Lav sink Brizo 5












P5KITCHEN




BATH


Lav sink Brizo 5












P6KITCHEN




BATH


Lav sink Brizo 5












P7KITCHEN




BATH




Lav sink Brizo 5










P8KITCHEN






BATH


Lav sink Brizo 4












P9KITCHEN




BATH


Lav sink Brizo 5






ITEM LOCATION FROM QTYEvergreen Dual Flush Wash Down 2 Piece Toilet, 1.6 GPF/ 0.8 GPF HET Elongated Bowl, Extended Height ADA Compliant; 5055BXXX-5219




P10KITCHEN




BATH


Lav sink Brizo 4












FIXTURE OPTION 2

MIRXCRA100CP "Ravenel" Pull-Out Spray Kitchen Faucet, polished chrome

Kitchen Sink Mirabelle

MIRWSED800HCP "Edenton" 8'' Widespread Bathroom Sink Faucet, polished chrome

Lav Sink Mirabelle

MIRED8030ECP/MIR3001 "Edenton" Single Handle Tub & Shower Faucet, polished chrome

Shower Bath Mirabelle

MIRED8020ECP/MIR3001 "Edenton" Single Handle Shower Faucet, polished chrome

Shower Faucet Mirabelle



Mirabelle MIRMLEDTHCP "Edenton" Paper Holder, polished chrome

Tissue Paper Holder Mirabelle

MIRMLED24TBCP "Edenton" Towel Bar, polished chrome Towel Bar Mirabelle

RFI Transmittal


Page 1 of 2

PROJECT 8TX13469

DATE SENT 7/21/2015

SUBJECT Light Fixture Schedule RFI ID BID 006



QUESTION: Please provide a complete light fixture schedule.

SUGGESTION:

ANSWER: This RFI Response clarifies a question from the General Contractor regarding the Design Intent of the Contract Documents with no anticipated material effect on CONTRACT SUM or TIME. However, if Contract Sum or Time is affected, contact Architects Office immediately for further instructions and disposition of the following directive. July 21, 2015 See attached schedules

FROM




TO





1 7/21/2015Copy of Tyndall Common Area FFE.XLSX

1 7/21/2015Copy (2) of TYNDALL UNIT SCHEDULE.XLSX


ID: 00063

Page 2 of 2

COPIES:




FLOORING



PAINT



COUNTERTOPS


TILE






LIGHTING









HARDWARE






Emtek: Key in Hanover Lever - Flat Black US19 Unit entry doors Emtek


Front Door Emtek

GRAY OPTION

FLOORING

Wood Floor: Hand Scraped Alaska White Oak Living Areas Hardwood Bargains

Carpet: Milliken, Imagine - Stratum - Denim Bedrooms Schroeder Carpet

PAINT



COUNTERTOPS

Caesarstone: 5003 Piatra Grey All countertop locations Caersarstone

TILE


Foundation: Fox Kitchen Backsplash Ann Sacks


Natucer: Roma Hex Bathroom Floor and Walls Architerra

Natucer: 9"X10" Tile in Roma Bathroom Floor and Walls Architerra


LIGHTING








HARDWARE









Front Door Emtek

LIGHT OPTION

FLOORING

Wood Floor: Hnad Scraped and Wire Brushed Andora White Oak Living Areas Hardwood Bargains

Carpet: Milliken, Imagine - Stratum - Manilla Bedroom Schroeder Carpet

PAINT



COUNTERTOPS

Caesarstone: 4235 Shitake All countertop locations Caesarstone

TILE

Foundation: Desert Kitchen Backsplash Ann Sacks

Grout:386 Oyster Grey Kitchen Tile Custom Building Products

Natucer: Londres Hex Bathroom Floor and Walls Architerra

Natucer: 9"X10" Tile in Londres Bathroom Floor and Walls Architerra

Grout: 386 Oyster Grey Bathroom Tile Custom Building Products

LIGHTING









HARDWARE








Front Door Emtek

6TH FLOOR

FLOORING

Hardwoods throughout Hardwood Bargains

COUNTERTOPS

Caesarstone Selections All Countertop locations Caesarstone


Carrara MarbleBathroom Countertops if Owner chooses Carrara 3'' Hex on walls and floors in Bathroom

TILE

Foundation Brick Bathroom: walls and floor Ann Sacks

Carrara Marble 3'' Hex Bathroom: all walls and floors

LIGHTING


Mara Large Pendant Dining Area Arteriors Home

IC - S Pendant Kitchen Pendants Lumens

IC - Wall/Ceiling Light Bathroom Sconces Lumens

PAINT



HARDWARE








Front Door Emtek

TYNDALL AT ROBERTSON HILL: COMMON AREAS FFEJOEL MOZERSKY DESIGN

ITEM LOCATION FROM QTY PPU SHIPPING TOTAL STATUS LOCATION ORDER BY/NOTESCLUBHOUSE $0.00

$0.00

FLOORING $0.00


$0.00

PAINT $0.00


$0.00LIGHTING $0.00

Marimba LED Pendant, white Clubhouse Lumens 4 $659.00

$2,636.00

$0.00HARDWARE $0.00

FURNITURE $0.00

Bank Mink Velvet 80" Sofa Sofa BluDot 3 $2,070.00

$6,210.00

U Turn Lounge Chairs Design Within Reach 8 $3,357.50

$26,860.00

New Standard Leather Lounge Chair Lounge Chairs by sofa and window BluDot 6 $1,799.00

$10,794.00

Prouve Armchair, black gunmetal and black leather seat Dining Chairs Industry West 8 $175.00

$1,400.00

Sculpted Drum Coffee Table Coffee Table, Round West Elm 2 $340.00

$680.00

Strut Square Coffee Table, black Coffee Table, Square BluDot 1 $270.00

$270.00


Eric Trine Ochtahedron Side Table, black Side Table West Elm 2 $255.00

$510.00


$1,990.00

TBD Rug

$0.00

Punk Lamp, Charcoal Lamps BluDot 2 $242.10

$484.20

SMALL CONFERENCE ROOM $0.00$0.00

FLOORING $0.00


$0.00PAINT $0.00

SW 7004: Snowbound All walls, ceiling, and cabinets: satin on walls, semi gloss on woodwork Sherwin Williams $0.00

LIGHTING $0.00


$659.00HARDWARE $0.00

FURNITURE


$1,990.00


$1,400.00

CONFERENCE ROOM $0.00FLOORING $0.00



$0.00PAINT $0.00


$0.00COUNTERTOPS $0.00

Caesarstone: 4030 H Pebble Honed Bar countertop Caersarstone $0.00

LIGHTING $0.00


$659.00

FURNITURE $0.00


$2,450.00

Aegean Dining Table 84" Dining Table Restoration Hardware 2 $1,610.00

$3,220.00

CAVE $0.00$0.00

FLOORING $0.00

Concrete Cave Floor

$0.00PAINT $0.00



Caesarstone: 4030 H Pebble Honed All countertop locations Caersarstone $0.00

TILE $0.00

Diagonal Black and White Cabana Tile Concrete Tile Shop $0.00


122, Linen Cabana Grout Custom Building Products $0.00

$0.00

LIGHTING $0.00

20" Cave Pendants 10 $400.00 $4,000.00

$0.00

HARDWARE $0.00


All knob hardware locations Myknobs.com $0.00


All pull hardware locations Myknobs.com $0.00

FURNITURE $0.00

TBD Booth Fabric

TBD Booth Upholstery

Side Table

Cradle Barstool, Black Barstool Industry West 8 $135.00 $1,080.00

GYM $0.00$0.00

FLOORING $0.00

Gym Floor $0.00

PAINT $0.00

SW 7004: Snowbound All walls, ceiling, and cabinets: satin on walls, semi gloss on woodwork Sherwin Williams $0.00

LIGHTING $0.00


Minka Aire: Artemis with light kit - Black All fan locations Lumens $0.00

Emperor Suspension Lamp Hive Modern 8 $2,909.00 $23,272.00

HARDWARE $0.00

WOMEN'S $0.00FLOORING $0.00


$0.00WALLS $0.00

Rio, Dove/ Milk Bathroom Walls Ann Sacks $18.00 $0.00

COUNTERTOPS $0.00


LIGHTING $0.00

FIXTURES

Purist Wall Mount Commercial Bathroom Sink Faucet Faucet Kohler 2 $0.00


Commercial Flushometer High Efficiency Toilet, 1.28 GPF, Elongated Bowl

Toilet Toto 3 $0.00

$0.00$0.00

MEN'S $0.00FLOORING $0.00


$0.00PAINT $0.00





LIGHTING $0.00

FIXTURES

Purist Wall Mount Commercial Bathroom Sink Faucet Faucet Kohler 2 $0.00


Commercial Flushometer High Efficiency Toilet, 1.28 GPF, Elongated Bowl

Toilet Toto 3 $0.00

$0.00COFFEE BAR $0.00FLOORING $0.00


$0.00PAINT $0.00




LIGHTING $0.00$0.00

HALLWAYS $0.00

LIGHTING $0.00

103040 - QB LED Wall Sconce, white, bruck lighting all hall lights Y Lighting $183.75 $0.00

$0.00MISCELLANEOUS DCOR 1 $20,000.00 $20,000.00

$0.00

TOTAL $110,564.20

RFI Transmittal


Page 1 of 2

PROJECT 8TX13469

DATE SENT 7/20/2015

SUBJECT Wood Door Spec RFI ID BID 014



QUESTION: Please provide a specification section for Wood Doors

SUGGESTION:

ANSWER: This RFI Response clarifies a question from the General Contractor regarding the Design Intent of the Contract Documents with no anticipated material effect on CONTRACT SUM or TIME. However, if Contract Sum or Time is affected, contact Architects Office immediately for further instructions and disposition of the following directive. July 20, 2015 See attached default spec.

FROM


Kiel SiemoneitHumphreys & Partners Architects, L.P.

[email protected] 972-701-9636

TO





1 7/20/2015

081416-Flush Wood Doors_2014-10-05.pdf

COPIES:


ID: 00062

Page 2 of 2


__________________________________________________________________________________________________________________________________________________________________________

Humphreys & Partners Architects, LP **Date** **Project** 08 14 16 - 1 Flush Wood Doors

SECTION 08 14 16

FLUSH WOOD DOORS

PART 1 - GENERAL

1.1 SUMMARY

A. Section Includes: 1. Interior hollow core wood doors. 2. Interior solid core doors. 3. Interior French doors. 4. Unit entry doors. 5. Factory fitting wood doors to frames and factory machining for hardware.

1.2 SUBMITTALS

A. Product Data: Submit manufacturers data for each type of door, including details of edge construction and trim for openings.

B. Shop Drawings: Submit drawings showing schedule of doors indicating location, size, and hand of each door; elevation of each kind of door; construction details not covered in product data; location and extent of hardware blocking; and other pertinent data. Note discrepancies between the Drawings and door schedules, and the requirements of regulatory and testing agencies.

C. Samples: 1. Opaque Finishes: Submit 2 samples, 8 inches x 10 inches, for each type of finish.

1.3 QUALITY ASSURANCE

A. Coordination: Contractor shall be responsible for coordinating and obtaining necessary information from hardware manufacturers. Door manufacturer shall be responsible for coordinating necessary information received by Contractor from hardware and metal frame manufacturers in order that doors shall be properly prepared to receive hinges and hardware. Contractor shall provide door supplier with approved frame schedule, hardware schedule, and hardware templates. Furnish to door supplier 60 days prior to desired delivery date of doors.

1.4 DELIVERY, STORAGE, AND HANDLING

A. Comply with requirements of referenced standard and manufacturer's written instructions.

B. Package doors individually in plastic bags or cardboard cartons or as required to protect door edges and faces.

C. Mark each door on top and bottom rail with opening number used on shop drawings.

D. Store doors flat and protect from construction activity, dirt, and exposure to sunlight.

E. Handling: 1. Always handle doors with clean hands or gloves. 2. Do not drag doors across one another. 3. Maintain factory packaging or other means of protection on doors, until date of Substantial

Completion.

__________________________________________________________________________________________________________________________________________________________________________


1.5 PROJECT CONDITIONS

A. Environmental Limitations: Do not deliver or install doors until building is enclosed, wet work is complete, and HVAC system is operating and will maintain temperature and relative humidity at occupancy levels during the remainder of the construction period.

1.6 WARRANTY

A. Warranty: Manufacturer's standard form, signed by manufacturer, Installer, and Contractor, in which manufacturer agrees to repair or replace doors that are defective in materials or workmanship. 1. Warranty shall also include removal of defective door, hanging, installation or hardware and

finishing that may be required due to repair or replacement of defective doors. 2. Warranty shall be in effect during the following period of time from date of Substantial

Completion: a. Hollow-Core Interior Doors: Five years. b. Solid-Core Interior Doors: Lifetime warranty for interior doors; five year warranty for

exterior doors.

PART 2 - PRODUCTS

2.1 MANUFACTURERS

A. Manufacturers: Subject to compliance with requirements, available manufacturers offering products that may be incorporated into the Work include, but are not limited to the following: 1. Craftsmen in Wood. 2. Jeld-Wen/Craftmaster. 3. Masonite.

2.2 FLUSH WOOD DOORS, GENERAL

A. Hollow-Core Doors: 1. Construction: Standard hollow core.

B. Fire-Rated Wood Doors: Doors complying with NFPA 80 that are listed and labeled by a qualified testing agency, for fire-protection ratings indicated, based on testing at positive pressure according to UL 10C. 1. Cores: Provide core specified or mineral core as needed to provide fire-protection rating

indicated. 2. Edge Construction: Provide edge construction with intumescent seals concealed by outer

stile except where surface-applied intumescent seals are indicated. Comply with specified requirements for exposed edges.

3. Pairs: Provide fire-retardant stiles that are listed and labeled for applications indicated without formed-steel edges and astragals. Provide stiles with concealed intumescent seals. Comply with specified requirements for exposed edges

C. Smoke- and Draft-Control Door Assemblies: Listed and labeled for smoke and draft control, based on testing according to UL 1784.

D. Mineral-Core Doors: 1. Core: Noncombustible mineral product complying with requirements of referenced quality

standard and testing and inspecting agency for fire-protection rating indicated. 2. Blocking: Provide composite blocking with improved screw-holding capability approved for

use in doors of fire-protection ratings indicated as needed to eliminate through-bolting hardware.

__________________________________________________________________________________________________________________________________________________________________________


3. Edge Construction: At hinge stiles, provide laminated-edge construction with improved screw-holding capability and split resistance. Comply with specified requirements for exposed edges

E. Particleboard-Core Doors: 1. Particleboard: ANSI A208.1, Grade LD-2, made with binder containing no urea-

formaldehyde. 2. Blocking: Provide wood blocking in particleboard-core doors as needed to eliminate through-

bolting hardware.

F. Structural-Composite-Lumber-Core Doors: 1. Structural Composite Lumber: WDMA I.S.10.

a. Screw Withdrawal, Face: 700 lbf (3100 N). b. Screw Withdrawal, Edge: 400 lbf (1780 N).

2.3 DOORS FOR OPAQUE FINISH

A. Veneers: One piece paint grade hardboard with smooth surface, 1/8 inch thick, bonded to core with water-resistant adhesives.

B. Hollow-Core Doors: 1. Grade: Custom. 2. Core: Expanded honeycomb made of corrugated fiberboard. Meet or exceed the

requirements of WDMA I.S.1A Series. 3. Blocking: Provide wood blocking with minimum dimensions as follows:

a. 5-by-18-inch lock blocks. 4. Configuration as indicated on Drawings.

C. Solid-Core Doors: 1. Grade: Custom. 2. Core:

a. Rated Interior Doors: Mineral board. b. Nonrated Interior Doors: Particleboard. Meet or exceed the requirements of

WDMA I.S. 1A Series. c. Protected Exterior Doors: Particleboard. Meet or exceed the requirements of

WDMA I.S. 1A Series. d. Doors Receiving Exit Devices: Structural-composite-lumber.

3. Construction: Three plies. Stiles and rails are bonded to core, then entire unit is abrasive planed before veneering. Faces are bonded to core using a hot press. a. Adhesives (Exterior Doors): Type I in accordance with WDMA T.M.-6.

2.4 FABRICATION

A. Fabricate doors with stile width and blocking to receive door hardware.

B. Factory-Fitting (Prehanging): All doors shall be prehung. 1. Prehang doors at factory in accordance with tolerance requirements of the WDMA

Standards with allowances for specific undercuts as indicated on the door schedule. 2. Provide standard bevel or radius to edge of door as required for the installation. 3. Butt hinges: Comply with Section 08 71 00 Door Hardware. 4. Hinge doors with clearance of not more than 3/32 inch at each side, and head; clearance at

bottom 1/2 inch or as required for threshold. 5. Mortise, drill or otherwise work doors for finish hardware as scheduled, beveling lock edge to

allow for proper clearance in opening and closing doors.

__________________________________________________________________________________________________________________________________________________________________________


2.5 SHOP PRIMING

A. Doors for Opaque Finish: Shop prime faces and edges of doors, including cutouts, with one coat of wood primer to receive paint finish as specified in Section 09 91 00 - Painting.

PART 3 - EXECUTION

3.1 EXAMINATION

A. Examine doors and installed door frames before hanging doors. 1. Verify that frames comply with indicated requirements for type, size, location, and swing

characteristics and have been installed with level heads and plumb jambs. 2. Reject doors with defects.

B. Proceed with installation only after unsatisfactory conditions have been corrected.

3.2 INSTALLATION

A. Install doors to comply with manufacturer's written instructions, referenced quality standard, and as indicated. 1. Install fire-rated doors in accordance with NFPA 80. 2. Install smoke- and draft-control doors according to NFPA 105.

B. Factory-Fitted Doors: Prehung door and frame units shall be hung true and plumb with standard bevel and with uniform 3/32 inch clearance at jambs and head, and 1/2 inch bottom clearance, unless otherwise required. Mortise, drill or otherwise prepare doors for finish hardware specified in Section 08 71 00 Door Hardware.

C. Job-Fitted Doors: Align and fit doors in frames with uniform clearances and bevels as indicated below; do not trim stiles and rails in excess of limits set by manufacturer or permitted for fire-rated doors. Machine doors for hardware. Seal edges of doors, edges of cutouts, and mortises after fitting and machining. 1. Clearances: Provide 1/8 inch (3.2 mm) at heads, jambs, and between pairs of doors. Provide

1/8 inch (3.2 mm) from bottom of door to top of decorative floor finish or covering unless otherwise indicated. Where threshold is shown or scheduled, provide 1/4 inch (6.4 mm) from bottom of door to top of threshold unless otherwise indicated. a. Comply with NFPA 80 for fire-rated doors.

D. Doors that are cut or planed for fitting shall be immediately resealed with a transparent wood sealer. Doors shall operate freely without sticking or binding, without hinge-bound conditions and with hardware installed, properly adjusted and functioning.

E. Paint doors if unfinished as specified in 09 91 00 Painting. Door color may vary between corridor face and unit interior face.

3.3 FIELD QUALITY CONTROL

A. Manufacturer's representative shall inspect fire rated doors (including frames and hardware as a unit) and verify compliance with UL 10C (positive pressure testing) as required by IBC for Fire Tests of Door Assemblies. Fire rated doors (including frames and hardware as a unit) which do not comply with UL 10C (positive pressure testing) as required by IBC for Fire Tests of Door Assemblies shall be removed and replaced at no additional cost to Owner.

3.4 ADJUSTING

__________________________________________________________________________________________________________________________________________________________________________


A. Operation: Rehang or replace doors that are warped or do not swing or operate freely.

3.5 CLEANING

A. During the course of the Work and on completion of the Work, remove excess materials, equipment and debris and dispose of away from premises. Leave Work in clean condition.

END OF SECTION



FLOORING



PAINT



COUNTERTOPS


TILE






LIGHTING



#46679 Tenley Large Pendant in Bronze Dining table area (Option 2) Arteriors H

Download - The Tyndall - Bidders Addendum 01

Top Related