Download - The Barton Catalogue - Emotion Yachting · The Barton Catalogue Barton Marine Equipment Limited Marine House · Tyler Way · Whitstable · Kent CT5 2RS UK t+44 (0)1227 792979 f +44

The Barton Catalogue

Barton Marine Equipment Limited

Marine House · Tyler Way · Whitstable · Kent CT5 2RS UK

t +44 (0)1227 792979

f +44 (0)1227 793555

e [email protected]

www.bartonmarine.com



new

pro

duc

ts Welcome to the new Barton catalogue...At Barton we have continued to improve and widen our choice of product lines.

All of our products are now supplied on attractive backing cards which give full technicaldetails of each item. These include details of safe working loads, maximum line capacities,recommended boat sizes and much more.

We have also included more complete packaged kits for mainsheettravellers, the Boomstrut and lazy jacks to name a few. All the partsrequired together with full fitting instructions are provided in each kit.

New products featured in this catalogue include:DO 550 rope clutches – not only good looking, but a completelynew design to incorporate the latest materials and manufacturingprocesses. Details on page 39.

Backstay tensioner blocks in high load stainless steel.Suitable for yachts with split backstays. Details on page 19.

Fuel Whistle – an environmentally friendly new product that preventsfuel spills when refuelling. This not only keeps your boat clean, buthelps to prevent pollution. Details on page 52.

The award-winning, patented ClamSeal™ – a glue-less repairsystem that instantly repairs small tears or splits in inflatables above orbelow the waterline – regardless of the fact that the material may be wet.Details on page 51.

Our Barton Merchandiser Racks have been updated to bring them in line with our new packaging. This year a newcompact version has been introduced for the smaller chandler that may be limited for space.

The Barton website continues to expand and holds a far greater breadth of technical information than can be containedin this catalogue. Visit us at www.bartonmarine.com to help with your choice of the best product to suit yourrequirements, or we would be pleased to take your telephone call for any information or advice on our products.

Our new home, pictured below, continues to make us more efficient and allow for continued expansionand product development.

We are proud to be based in Whitstable, Kent, UK and from here supply our growing global customer base.

1

contents


The Barton Catalogue – contentsBarton Boomstrut .................................................................................................................................................................page 4Blocks

Size 1 (30mm sheave) standard blocks..............................................................................................page 5Size 2 (35mm sheave) standard blocks .....................................................................................pages 6-7Size 3 (45mm sheave) standard blocks .....................................................................................pages 8-9Size 4 (58mm sheave) standard blocks..............................................................................pages 10-11Size 5 (54mm sheave) cruiser blocks ...................................................................................pages 12-13Size 6 (64mm sheave) cruiser blocks ...................................................................................pages 14-15Size 7 (70mm sheave) cruiser blocks ...................................................................................pages 16-17Stainless steel blocks...................................................................................................................................page 18Wire rope blocks ...........................................................................................................................................page 19Snatch blocks...................................................................................................................................................page 20High load & foot blocks............................................................................................................................page 21

Track & travellers – recirculating ball bearing systems

Recirculating ball bearing mainsheet & genoa traveller systems .......................pages 22-29Complete pack mainsheet traveller systems................................................................................page 24Modular components.................................................................................................................................page 25Travellers – single take off .......................................................................................................................page 26Travellers - double take off .....................................................................................................................page 27End fittings........................................................................................................................................................page 28Track; drilled, sliding bolt and beam................................................................................................page 29

‘I’ track & travellers

19mm ‘I’ track & travellers .....................................................................................................................page 3024mm ‘I’ track & travellers .....................................................................................................................page 3128mm ‘I’ track & travellers .....................................................................................................................page 32

‘T’ track genoa cars and accessories

20mm ‘T’ track genoa cars ....................................................................................................................page 3325mm ‘T’ track genoa cars........................................................................................................pages 34-3532mm ‘T’ track genoa cars........................................................................................................pages 36-37

Deck organiser blocks.....................................................................................................................................................page 38DO 550 clutches.................................................................................................................................................................page 39Winch handles ....................................................................................................................................................................page 40Barton composite winches and the Barton ‘Wincher’ ..............................................................................page 41Sail Handling

– lazy jack kits; reefing kits, gooseneck hooks, mast steps ..................................pages 42-43Special cleats & Barton Line Tamer ........................................................................................................................page 44Fairleads, cleats & thimbles ........................................................................................................................................page 45Dinghy & dayboat fittings ...........................................................................................................................................page 46Tiller extensions ..................................................................................................................................................................page 47‘K’ cam cleats.......................................................................................................................................................................page 48Dinghy mast support ......................................................................................................................................................page 49Inspection covers ...............................................................................................................................................................page 50Barton ClamSeal™ ............................................................................................................................................................page 51Barton Fuel Whistle..........................................................................................................................................................page 52Bullseyes, pad eyes & deck eyes...............................................................................................................................page 53Clevis pins, split pins, springs & sheaves............................................................................................................page 54Shackles & ‘S’ hooks .......................................................................................................................................................page 55Part number index ............................................................................................................................................................page 56

The Barton Ball Bearing OptionAll Barton blocks from size 1 to size 7 offer the

option of a high-performance, low-friction ballbearing sheave version. Our design features

twin rows of acetal balls running on a largediameter centre boss. This enables theload bearing surface to be maximised overthe greatest number of bearings, givinghigher performance in all directions.

Ball bearing blocks to the unique Bartondesign bring you the possibility of upgrading

your block systems at a realistic cost.

Barton blocks – a comprehensive rangeto suit every requirement


ab

out b

lock

s

2

Barton blocks

Fixed EyeClevis PinA simple, low-priced fixedeye block with removableclevis pin for attachment.

Fixed EyeWith a plainattachment eye.

Reverse ShackleRemovable shackle thatcan be set in-line or at90° to the sheave.

SwivelFully swivelling head withremovable shackle.

Snap ShackleWith a cast stainlesssteel swivelling snapshackle – ideal forquick-release downhaulsor vang tackles.

BecketAll the appropriateblocks are availablewith or without becket.

A wide range of attachment heads areavailable on Barton blocks, including:

Probably one of the most comprehensive ranges of blocks available from anymanufacturer – these compact, high strength products are manufactured from the most

modern materials and are suitable for use on dinghies, dayboats, cruising and racing yachts.

Designed for high performance, strength and light weight, these products provide maximumefficiency and a long working life.

With sheaves ranging from 30mm to 85mm, safe working loads up to 2700kg, rope capacity up to 14mm and a widevariety of sheave permutations, you are sure to find the right product to suit your requirements.

Although we madeour name worldwidewith the design andmanufacture ofblocks, at Barton ourongoing programmeof R&D means wehave developed amuch wider range of state-of-the-art deck hardware.

From complete packaged mainsheet systems to genoa track andtravellers, the 2008 Barton range covers virtually all your deckrigging requirements, and more.

See page 39 of this new catalogue for details of our brand newclutch – available in single, double and triple and ideal for cruisingor racing yachts.

Variloc Multi HeadAllows swivel to be locked at30° positions in relation tosheave. Inverting the plasticlocking piece converts toswivel mode. Supplied withscrew pin strip shackle.

Barton PlainBearing BlocksAll Barton plain bearing blocks have aprecision moulded acetal sheave running a

large diameter brass bearing, ensuring freerunning under the highest of loads.

We don’t just make blocks...

3control the power

ab

out blocks

Barton blocks

Some tips when selectingand fitting blocks...• Choose carefully, ensuring the block is strong

enough for the job required. Rope capacitydoes not denote strength.

• Check line capacity is sufficient. A tight fitwill cause friction, side plate and line wear.

• Always ensure a fair lead. Blocks are designedto run at maximum load bearing and efficiencywith the load running directly through thecentral axis.

• Never load one sheave of a double block.This will cause the block to fall to one sideand create side plate and line wear.

• When fitting blocks to the masthead alwaysensure that there is sufficient articulation.

• When fitting mainsheet cam cleat blocks,ensure that the cam cleat is set at the correctangle to allow easy release in an emergency.

• Foot blocks & cheek blocks should always bethrough-bolted for maximum strength.

Care of blocks and deck fittings...• Regularly rinse blocks and deck fittings

with fresh water to remove salt.

• Ensure that sheaves run freely.

• Check all masthead blocks on a regular basis.

• Check shackles for signs of strain or overload.

• Inspect cam cleats (where fitted) forexcessive wear.

The comprehensiveBarton range includes:

• Single

• Single & cam cleat

• Double

• Triple

• Triple & cam cleat

• Fiddle

• Fiddle & cam cleat

• Snatch blocks

• Foot blocks

• Foot blocks with jamming cam

• High load blocks

• Wire sheave blocks.

control the power4

boo

mst

rut

Barton Boomstrut

*The maximum amount the boomstrut rods can beshortened to fit inside the vang area.

** The maximum amount of available pin-to-pin travelwhen flexed.

*** The downward force the boomstrut will support atthe point of the boom fitting attachment.

These are approximate measurements which may varydepending on boat type.

Max Max Maxpin-to-pin rods can be initial full stroke at full

Suggested boat length (m) Part length reduced by* adjustment** adjustment Force***No. mm mm mm mm kg

Barton BoomstrutUp to 6.0m 44 010 960 150 300 150 90

6.0m to 7.5m 44 020 1070 150 300 150 140

7.5m to 9.0m 44 030 1180 150 300 150 185

9.0m to 10.5m 44 035 1320 150 400 200 230

10.5m to 12m 44 040 1450 150 400 200 270

Boomstrutextended

Boomstrutcompressed

• Five sizes to suit yachts up to 12m/40ft LOA

• Patented flexing spring provides fast responseand a constant force for vang efficiencyThe boomstrut’s lightweight, low-profile design featurestwo flexible coated fibreglass rods which provide the forceto support the boom. Pulling the boom down with aconventional kicker causes the Boomstrut to flex upwards;releasing straightens the rods, thereby lifting andsupporting the boom.

• Maintenance-free, durable designEliminates friction and sliding parts.

• Improved performanceLess weight and windage.

• Easy installationThere’s no need to replace your existing hardware – theBoomstrut mounts independently inside the existingkicking strap tackle.

• Simple-to-follow instructionsThe Boomstrut is supplied with complete fitting instructionsand more comprehensive details are available on ourwebsite, www.bartonmarine.com.

• Mast fitting can use existing luff grooveTo eliminate drilling, the Boomstrut’s mast bracketcan be slotted into your mast’s luff groove.

• Contoured boom fittingThe Boomstrut’s boom bracket is contoured to fit bothround and flat boom profiles.

• Carefully designed & constructedThe Barton Boomstrut has been carefully designed andconstructed to eliminate sharp edges, minimise parts andprovide trouble-free installation and use.

All parts are from high-grade stainless steel and Spectrogrey anodised aluminium for good looks and durability.

You’ll find many reasons to appreciate theBarton Boomstrut – no more topping lift hassles,

no adjustments and no hang-ups – neveragain will your boom fall

accidentally.

Back-to-back swivelA useful doubleswivelling blockwith a variety ofapplications,especially dinghymainsheet/horse blocks.

Plain Ball-bearing Length Weight (g)sheave sheave mm plain ball

Single size 1 blocksSingle – fixed eye clevis pin 01 090 11 090 78 48 46

Single – fixed eye clevis pin + becket 01 091 11 091 87 52 51

Single – fixed eye 01 110 11 110 70 41 40

Single – fixed eye + becket 01 111 11 111 80 46 44

Single – reverse shackle 01 120 11 120 82 51 49

Single – reverse shackle + becket 01 121 11 121 93 56 55

Single – swivel 01 130 11 130 85 57 55

Single – swivel + becket 01 131 11 131 98 61 60

Single – upright 01 150 11 150 53 64 62

Single – upright with fairlead 01 151 11 151 63 70 78

Lightweight cheek block 01 160 11 160 55 21 20

Single – stand up block 01 170 11 170 79 62 60

Single – spinnaker lead 01 180 11 180 114 59 57

Lightweight lead block 01 190 11 190 44 20 18

Double size 1 blocksDouble – fixed eye 01 210 11 210 69 65 63

Double – fixed eye + becket 01 211 11 211 78 71 69

Double – reverse shackle 01 220 11 220 83 77 73

Double – reverse shackle + becket 01 221 11 221 91 82 78

Double – swivel 01 230 11 230 90 83 80

Double – swivel + becket 01 231 11 231 99 88 85

Double – upright 01 250 11 250 53 89 86

Back to back swivel 01 280 11 280 118 81 78

Triple size 1 blocksTriple – reverse shackle 01 320 11 320 81 102 97

Triple – reverse shackle + becket 01 321 11 321 94 109 103

Triple – swivel 01 330 11 330 85 108 103

Triple – swivel + becket 01 331 11 331 98 112 108

5www.bartonmarine.com

size 1 blocks

30mm standard blocks

Fixed EyeClevis PinA simple, low-priced fixedeye block with removableclevis pin for attachment.Pin Ø 5mm. Widthbetween straps 13mm.



SwivelFully swivelling headwith removable shackle.

BecketAll the appropriate size1 blocks are availablewith or without becket.

A strong, lightweight range of blocks for use on dinghiesand dayboats or as lead blocks on larger craft.

All available with plain or ball bearing sheaves:

Ball bearing blocksWith our unique super-low friction ball racesystems, featuring acetal sheaves and delrin ballbearings, running on a large diameter centreboss. This allows us to fit more load-bearingballs, which ensure extremely low frictionperformance, even under high loads.

Plain bearing blocksBarton plain bearing blocks have a precisionmoulded acetal sheave running on a largediameter brass bearing, ensuring freerunning under the highest of loads.

Sheave size 30mm x 11mm (13/16 x 7/16”)

Important note – break loads:Where break and safe working loads are stated,it is assumed that all sheaves are evenly loadedas in a purchase tackle. Uneven loading, orloading of one sheave in a double or tripleblock, will severely effect strength quoted.If unsure, please seek further advice.

Maximum rolling load on ball bearing blocksis the maximum free running load beforeball bearings will distort.

Available with these heads and shackles...

SWL350kg (771lbs)

Max rolling load(ball bearing blocks)245kg (540lbs)

Max rope diameter

8mm (5/16”)

Break load700kg (1543lbs)

01 090 01 130

UprightWith or without fairlead.

Fairlead prevents linefalling away whennot under load.

Fastenings 5mm.

01 150

01 151

01 160Lightweight leadA handy lightweight blockfor use where high load isnot expected.

01 190

01 170

Spinnaker leadA useful block

mounted on astainless steel tang.

Fastenings 5mm.

01 280

01 230

01 250

01 330

01 180

Cam cleat blocksFitted with Kevlar ‘K’ cams

(unless otherwise stated).Cam arms are fullyadjustable by movingthe locking clevis pinto achieve the correct

cleating angle. Used inconjunction with the relevant

top block, this range of blocks isparticularly useful for mainsheet,vang tackles or downhauls ondinghies, dayboats or lightcruising yachts.

Fixed EyeClevis PinA simple, low-priced fixedeye block with removableclevis pin for attachment.Pin Ø 5mm. Widthbetween straps 13mm.




Snap ShackleWith a cast stainless steelswivelling snap shackle.Ideal for quick-releasedownhauls or vang tackles.

BecketAll the appropriate size 2blocks are available withor without becket.

Stand upFeatures aflexible plasticspring for anti-tumble action.Base Ø 58mm.

Fastenings5mm.

02 150

02 170

02 130

Stanchion leadDesigned for use

on 25mm Ø tubes,with a swivelling

action with up-downmovement allowing

for a fair lead oncontrol lines.

Note: A larger size 3should be used for

final take off onfurling lines.

UprightWith orwithout fairlead.

Fairlead preventsline falling awaywhen notunder load.

Fastenings 5mm.

02 161

02 571


size

2 b

lock

s A strong, lightweight range of blocks for use on dinghiesand dayboats or as lead blocks on larger boats.

A comprehensive range of multiple sheave options,together with fiddles and cam cleat blocks, allowpowerful, lightweight tackles to be achieved.

Sheave size

Single 35mm x 11mm (13/8 x 7/16”)

Fiddle 30/45mm x 11mm (13/16 ” /13/4” x 7/16”)

Important note – break loads:Where break and safe working loads are stated, it is assumed that all sheaves are evenlyloaded as in a purchase tackle. Uneven loading, or loading of one sheave in a double ortriple block, will severely effect strength quoted. If unsure, please seek further advice.

Maximum rolling load on ball bearing blocks is the maximum free running load beforeball bearings will distort.Available with these heads and shackles...

6

02 151

02 190

SWL

370kg (815lbs)

Max rolling load(ball bearing blocks)

260kg (573lbs)

Max rope diameter

8mm (5/16”)

Break load

740kg (1630lbs)

02 140Back-to-backswivel

A useful doubleswivelling block

with a variety ofapplications,

especially dinghymainsheet/

horse blocks.

02 280

Spinnaker leadA useful block

mounted on astainless steel tang.

Fastenings 5mm.

02 180

02 160

CheekWith a plastic

backing platestandard –

curved backingplate also

available (02161),to allow snug

attachment to spars etc.

Base size 79mm x 43mm.Fastenings 5mm.

35mm standard blocksAll available with plain or ball bearing sheaves:



7


Single size 2 blocks

Single – fixed eye clevis pin 02 090 12 090 87 56 54


Single – fixed eye 02 110 12 110 79 50 47




Single – swivel 02 130 12 130 97 64 62


Single – snap shackle 02 140 12 140 106 96 93

Single – snap shackle + becket 02 141 12 141 115 101 98

Single – upright 02 150 12 150 51 78 76


Single – cheek block 02 160 12 160 80 73 69

Curved backing plate (for cheek block) 02 161 – 80 15 –

Single – stand up 02 170 12 170 112 138 137

Single – stand up + becket 02 171 12 171 117 142 140

Single – spinnaker lead 02 180 12 180 122 68 66





Double – swivel 02 230 12 230 98 96 95


Double – upright 02 250 12 250 63 110 108

Back to back swivel 02 280 12 280 141 98 96



Triple – swivel 02 330 12 330 94 125 124


Fiddle size 2 blocksFiddle – fixed eye 02 410 12 410 128 98 97

Fiddle – fixed eye + becket 02 411 12 411 137 100 99

Fiddle – reverse shackle 02 420 12 420 140 109 108

Fiddle – reverse shackle + becket 02 421 12 421 150 113 112

Fiddle – swivel 02 430 12 430 147 113 112

Fiddle – swivel + becket 02 431 12 431 155 117 116

Fiddle – snap shackle 02 440 12 440 155 142 141

Fiddle – snap shackle + becket 02 441 12 441 163 150 147

Cam cleat size 2 blocksSingle – swivel + becket + cam 02 531 12 531 119 127 125

Single – snap shackle + becket + cam 02 541 12 541 122 157 155

Single – stand up + becket + cam 02 571 12 571 132 201 197

Fiddle – swivel + becket + cam 02 631 12 631 155 165 164

Fiddle – snap shackle + becket + cam 02 641 12 641 165 196 195

Fiddle – swivel + becket + plastic cam 02 731 12 731 157 167 166

Stanchion lead size 2 blocksSingle – stanchion lead 02 190 12 190 110 78 77

Double – stanchion lead 02 290 12 290 108 108 104

control the power

size 2 blocks

02 09002 230

02 290

02 330

02 430

02 531

02 440

02 541

02 631

02 731


02 250

Fixed EyeClevis PinA simple, low-pricedfixed eye block withremovable clevis pinfor attachment.Pin Ø 5mm. Widthbetween straps 13mm.


ReverseShackleRemovable shacklethat can be setin-line or at 90°to the sheave.


Snap ShackleWith a cast stainlesssteel swivelling snapshackle. Ideal forquick-release down-hauls or vang tackles.

VarilocMulti HeadAllows swivel to belocked at 30° positionsin relation to sheave.Inverting the plasticlocking piece convertsto swivel mode.Supplied with screwpin strip shackle.


Stand upFeatures a flexibleplastic spring foranti-tumble action.Base Ø 58mm.

Fastenings 5mm.

03 151

03 160

03 170

03180

Stanchion leadDesigned for use on25mm Ø tubes, with aswivelling action withup-down movementallowing for a fair leadon control lines.Note: A larger size 4 shouldbe used for final take off onfurling lines.

UprightWith or without fairlead.

Fairlead prevents linefalling away when notunder load.

Fastenings 5mm.

CheekWith a plastic backingplate standard - curvedbacking plate alsoavailable (03161),to allow snugattachment to spars etc.

Base size 92mm x52mm. Fastenings 5mm.

03161

03 511

Cam cleat blocksFitted with Kevlar ‘K’ cams(unless otherwise stated).Cam arms are fullyadjustable by movingthe locking clevis pin to

achieve the correct cleatingangle. Used in conjunction

with the relevant top block, this range ofblocks is particularly useful for mainsheet,vang tackles or downhauls on dinghies,dayboats or light cruising yachts.

control the power

size

3 b

lock

s A strong, lightweight range of blocks for use ondinghies, dayboats and light cruising yachts. Ideal formainsheet, vang, lead blocks or wherever a powerfuland compact purchase tackle is required.

A comprehensive range of cam cleat, fiddle, andfiddle & cam cleat versions are available.

Sheave size

Single 45mm x 13mm (13/4 x 1/2”)

Fiddle 30/54mm x 13mm (13/16 ” /13/4” x 1/2”)


8

03 150

03 190

03 090


SWL

385kg (848lbs)


270kg (595lbs)

Max rope diameter

10mm (3/8”)

Break load

770kg (1697 lbs)


Maximum rolling load on ball bearing blocks is the maximum free running load beforeball bearings will distort.




9




Single – fixed eye 03 110 13 110 90 77 79




Single – swivel 03 130 13 130 107 89 90




Single – upright 03 150 13 150 75 122 126



Curved backing plate (for cheek block) 03 161 – 92 19 –

Single – stand up 03 170 13 170 118 158 162


Single – variloc 03 180 13 180 104 90 92

Single – variloc + becket 03 181 13 181 117 98 100





Double – swivel 03 230 13 230 107 138 144


Double – upright 03 250 13 250 75 171 176



Triple – swivel 03 330 13 330 117 204 213






Fiddle – swivel 03 430 13 430 165 163 168




Fiddle – variloc 03 480 13 480 160 165 169

Fiddle – variloc + becket 03 481 13 481 175 163 188


Triple – swivel + becket + cam 03 531 13 531 137 306 315





Fiddle – variloc + becket + cam 03 681 13 681 170 253 257



03 140

03 250

03 440


size 3 blocks

03 330

03 130

03 230

03 430

03 631

03 641

03 731

03 531 03 571


Fixed EyeClevis PinA simple, low-pricedfixed eye block withremovable clevis pinfor attachment.Pin Ø 6mm. Widthbetween straps 13mm.


ReverseShackleRemovable shacklethat can be setin-line or at 90°to the sheave.


Snap ShackleWith a cast stainlesssteel swivelling snapshackle. Ideal forquick-release down-hauls or vang tackles.

VarilocMulti HeadAllows swivel to belocked at 30° positionsin relation to sheave.Inverting the plasticlocking piece convertsto swivel mode.Supplied with screwpin strip shackle.


Cam cleat blocksFitted with Kevlar

‘K’ cams (unlessotherwise stated).Cam arms are fullyadjustable bymoving the locking

clevis pin to achievethe correct cleating angle.

Used in conjunction with therelevant top block, this range ofblocks is particularly useful formainsheet, vang tackles ordownhauls on dinghies, dayboatsor light cruising yachts.


Fastenings 5mm.

04 150

04 170

04 090

UprightWith or withoutfairlead.

Fairlead preventsline falling awaywhen notunder load.

Fastenings 5mm.

04 931


size

4 b

lock

s A strong, lightweight range of blocks for use on dayboatsand cruising yachts. Ideal for mainsheets, vang tackles,lead blocks or wherever a powerful and compact purchasetackle is required.

A comprehensive range of cam cleat, fiddle, and fiddle &cam cleat versions are available.

Sheave size

Single 58mm x 17mm (21/4 x 5/8”)

Fiddle 32/58mm x 17mm (11/14 ” /21/4” x 5/8”)


10

04190

SWL

630kg (1385lbs)


440kg (970lbs)

Max rope diameter

12mm (7/16”)

Break load

1260kg (2770lbs)

04 140


04 130

CheekWith plastic backing plate to eliminate

damage to spars or decks.

Base size 107mm x 67mm.Fastenings 5mm.

04 160

04 180

04 151

Stanchion leadDesigned for use on

25mm Ø tubes, with aswivelling action with

up-down movementallowing for afair lead oncontrol lines.






11




Single – fixed eye 04 110 14 110 114 156 150




Single – swivel 04 130 14 130 138 187 181




Single – upright 04 150 14 150 92 218 214



Single – stand up 04 170 14 170 135 243 237

Single – stand up block + becket 04 171 14 171 152 262 253

Single – variloc 04 180 14 180 131 189 181






Double – swivel 04 230 14 230 138 291 283


Double – upright 04 250 14 250 92 321 314



Triple – swivel 04 330 14 330 139 391 380






Fiddle – swivel 04 430 14 430 185 254 244




Fiddle – variloc 04 480 14 480 177 259 243


Fiddle – triple 04 930 14 930 192 359 344




Fiddle – double swivel + cam 04 630 14 630 150 532 503







control the power

size 4 blocks

04 230

04 330

04 430

04 531

04 440

04 631

04 641


04 250

04 571

04 630

04 930





Variloc Multi HeadAllows swivel to be locked at 30°positions in relation to sheave.Inverting the plastic locking piececonverts to swivel mode. Suppliedwith screw pin strip shackle.

BecketAll the appropriatesize 5 blocks areavailable with orwithout becket.


Fastenings 6mm.

05 170

05 631

control the power

size

5 b

lock

s This range of high load cruiser blocks are of ruggedconstruction, featuring high quality injection moulded sideplates with all load-carrying components from 316 gradestainless steel. Side plates are through-bolted and rivetedfor added strength and security.

This good looking and versatile range is designed for useon larger cruising and racing yachts. All are designed forease of use with our ball-bearing mainsheet travellersystems – see pages 22-27.

A comprehensive range of cam cleat, fiddle, and fiddle& cam cleat versions are available.

Sheave size

Single 54mm x 17mm (21/8 x 5/8”)

Fiddle 38/64mm x 17mm (11/2 ” /21/2” x 5/8”)


12

54mm cruiser blocks

SWL750kg (1650lbs)


Max rope diameter

12mm (7/16”)


Cam cleat blocksFitted with Kevlar ‘K’ cams.Stainless steel cam arms arefully adjustable by moving thelocking clevis pin to achieve thecorrect cleating angle. Used inconjunction with the relevanttop block, this range of blocksis particularly useful formainsheet, vang tackles orpowerful downhauls.

05 641

05 430

05 440




13


Single size 5 blocksSingle – fixed eye 05 110 15 110 107 154 140




Single – swivel 05 130 15 130 130 197 183




Single – stand up 05 170 15 170 140 347 329


Single – variloc 05 180 15 180 125 195 181


Double size 5 blocksDouble – reverse shackle 05 220 15 220 125 274 247




Triple – swivel 05 330 15 330 150 490 475


Fiddle size 5 blocksFiddle – reverse shackle 05 420 15 420 185 278 255


Fiddle – swivel 05 430 15 430 185 300 278




Fiddle – variloc 05 480 15 480 185 295 275


Cam cleat size 5 blocksFiddle – swivel + becket + cam 05 631 15 631 209 469 449



Triple – swivel + cam 05 930 15 930 150 660 645



size 5 blocks

05 130

54mm cruiser blocks

05 140

05 180

05 220

05 320

05 930

05 330










size

6 b

lock




Sheave size

Single 64mm x 17mm (21/2 x 5/8”)

Fiddle 44/70mm x 17mm (13/4 ” /23/4” x 5/8”)


14

64mm cruiser blocks

SWL1000kg (2200lbs)


Max rope diameter

12mm (7/16”)


06 930

Cam cleatblocksFitted with Kevlar ‘K’ cams. Stainlesssteel cam arms are fully adjustableby moving the locking clevis pin toachieve the correct cleating angle.Used in conjunction with the relevanttop block, this range of blocks isparticularly useful for mainsheet,vang tackles or powerful downhauls.


Fastenings 6mm.

06 170

Important note – break loads:Where break and safe working loads are stated, it is assumed that allsheaves are evenly loaded as in a purchase tackle. Uneven loading, orloading of one sheave in a double or triple block, will severely effectstrength quoted. If unsure, please seek further advice.

Maximum rolling load on ball bearing blocks is the maximum free runningload before ball bearings will distort.




15






Single – swivel 06 130 16 130 142 227 217




Single – stand up 06 170 16 170 150 369 361


Single – variloc 06 180 16 180 138 228 217






Triple – swivel 06 330 16 330 170 686 662




Fiddle – swivel 06 430 16 430 210 357 346




Fiddle – variloc 06 480 16 480 205 356 335







06 631

control the power

size6 b

locks06 130

64mm cruiser blocks

06 140

06 180

06 641

06 220

06 43006 440

06 320

06 330







07 631

control the power

size

7 b

lock




Sheave size

Single 70mm x 20mm (23/4 x 3/4”)

Fiddle 44/70mm x 17mm (13/4 ” /23/4” x 5/8”)


16

70mm cruiser blocks

SWL1500kg (3300lbs)


875kg (1929lbs)

Max rope diameter

14mm (9/16”)


07 641

07 430

07 440

Cam cleat blocksFitted with Kevlar ‘K’ cams. Stainless steel cam arms are fullyadjustable by moving the locking clevis pin to achieve thecorrect cleating angle. Used in conjunction with the relevanttop block, this range of blocks is particularly useful formainsheet, vang tackles or powerful downhauls.

Important note – break loads:Where break and safe working loads are stated, it is assumed that allsheaves are evenly loaded as in a purchase tackle. Uneven loading, orloading of one sheave in a double or triple block, will severely effectstrength quoted. If unsure, please seek further advice.

Maximum rolling load on ball bearing blocks is the maximum free runningload before ball bearings will distort.




17






Single – swivel 07 130 17 130 163 354 345




Single – stand up 07 170 17 170 162 444 439


Single – variloc 07 180 17 180 163 328 317






Triple – swivel 07 330 17 330 163 734 725




Fiddle – swivel 07 430 17 430 220 449 406




Fiddle – variloc 07 480 17 480 220 417 405







Stand upFeatures a flexible plasticspring for anti-tumbleaction. Base Ø 67mm.

Fastenings 6mm.

07 170


size7 b

locks07 180

70mm cruiser blocks

07 140

07 130

07 220

07 320

07 930

07 330

Specifications Size 1 Size 2 Size 3

Sheave Ø 30mm 35mm 45mm

Sheave width 11mm 11mm 13mm

Max rope Ø 8mm 8mm 10mm

Break load 560kg 800kg 800kg

SWL 280kg 400kg 400kg

Max rolling load 200kg 280kg 280kg(ball bearing blocks)

95 102


sta

inle

ss s

teel

blo

cks For lines up to 10mm diameter.

Available with plain or ball bearing sheaves.A robust range of stainless steel blocks with a multitude ofuses on all types of sailing boats.

Highly polished side plates with flared cheeks prevent thepossibility of chafing the line whilst giving added strength.

A range of jamming blocks is also available – giving the abilityto make up strong, powerful, compact and lightweight tackles.

These are ideal for use on dinghies and dayboats forkicking straps or wherever a compact and powerfulrope tackle is required.

18

30/35/45mm stainless blocks


Single size 1 S/S blocks

Single 95 100 95 400 50 34 32

Single + becket 95 101 95 401 67 45 43

Single – Fixed Eye 95 102 95 402 68 39 37

Single – Fixed Eye + becket 95 103 95 403 85 48 46

Single – Swivel 95 104 95 404 86 53 51

Single – Swivel + becket 95 105 95 405 100 63 61

Double size 1 S/S blocksDouble – Fixed Eye 95 120 95 420 68 60 54

Double – Fixed Eye + becket 95 121 95 421 85 70 66

Double – Swivel 95 122 95 422 83 76 72

Double – Swivel + becket 95 123 95 423 100 86 82

Triple size 1 S/S blocksTriple – Fixed Eye 95 130 95 430 68 82 76

Triple – Fixed Eye + becket 95 137 95 437 85 93 87

Triple – Swivel 95 138 95 438 83 99 93

Triple – Swivel + becket 95 139 95 439 100 109 103

Jamming size 1 S/S blocksSingle Jamming + becket 95 131 95 431 100 95 93

Double Jamming + becket 95 132 95 432 100 117 113

Triple Jamming + becket 95 133 95 433 100 140 134

Single size 2 S/S blocksSingle 95 200 95 500 61 45 45

Single + becket 95 201 95 501 84 60 60

Single – Fixed Eye 95 202 95 502 76 48 48


Single – Swivel 95 204 95 504 96 63 63




Double – Swivel 95 222 95 522 95 92 92




Triple – Swivel 95 232 95 532 97 121 121


Single size 3 S/S blocksSingle 95 300 95 600 80 61 64

Single + becket 95 301 95 601 112 80 83

Single – Fixed Eye 95 302 95 602 93 71 74


Single – Swivel 95 304 95 604 107 87 90




Double – Swivel 95 322 95 622 107 129 135




Triple – Swivel 95 332 95 632 167 135 144


95 100

95 10495 105

95 121

95 122

95 130

95 123

95 137

95 138 95 132

95 120

19control the power

Important note – break loads:Where break and safe working loads are stated, it is assumed that all sheaves are evenly loaded with a straight lead.

Loads are not given for cheek blocks or upright blocks as this is dependent on fastenings used.To ensure maximum strength and load capabilities, fastenings must pass through hollow centre rivets of cheek blocks.

wire rop

e blocks

Wire Rope blocks

Part Sheave Sheave Rope Wire Break SWL WeightNo. Ø mm width mm Ø mm Ømm Load kg kg g

Aluminium blocksSingle – Fixed Eye 91 600 51 15 12 4 1750 875 155

Single – Fixed Eye 91 700 63 18 16 5 3000 1500 248

Cheek 91 650 51 15 12 4 – – 141

Cheek 91 750 63 18 16 5 – – 227

Brass sheave blocksSingle – Fixed Eye 91 200 35 8 4 4 400 200 67

Single – Fixed Eye 91 300 45 8 5 5 750 375 106

Upright blocksSingle – Fixed Eye 91 400 38 12 8 4 – – 92

Single – Fixed Eye 91 500 51 15 12 5 – – 160

High load wire rope blocksFixed Eye 91 301 45 8 5 5 1300 650 163

Swivel Eye 91 302 45 8 5 5 1300 650 212

Backstay tensionerBackstay tensioner system 02 740 45 8 5 5 1300 650 163

Backstay tensioner block 91 020 35 8 – 5 – – 277

Backstay tensioner block 91 040 50 15 – 10 – – 585

Aluminium high load blocksA range of high strength blocksdesigned for use with wire ropes orin exceptionally rugged conditions.

Cheeks are manufactured frommarine-grade aluminium, ‘Spectro’grey anodised for high UV-resistanceand durability.

Sheaves are precision-turned fromsolid aluminium bar, silver anodisedand running on nylon bearings toreduce friction under load.

Reinforcing plates, rivets andshackle straps are all from 316stainless steel.

Cheek block dimensions

91650 base 103 x 53mmfastenings 5mm

91670 base 120 x 65mmfastenings 6mm

Upright blocksWith heavy-duty 316 stainless steel side plates.Sheaves are precision turned from solidaluminium bar, silver anodised and running onnylon bearings to reduce friction under load.

91 600

91 700

91 650

91 750

91 301

High load wire rope blocksAvailable in fixed eye or swivel head.Cheeks are manufactured from 316stainless steel and sheaves are precisionturned from solid brass bar, runningon a stainless steel centre bush.

91 302

91 200

91 300

Brass SheaveBlocksA simple lead blockwith turned brasssheave and stainlesssteel fixed eye strap.

91 400

91 500

02 740Upright block dimensions

91 400 Base 38 x 45mm Fastenings 5mm91 500 Base 51 x 55mm Fastenings 6mm

BackstaytensionersystemA block andtackle systemdesigned foruse on split ortwin backstays.Features stainlesssteel double blockwith brass sheaves,together withtensioning blocksfrom our size2 range.

Backstay tensioner blocksFeaturing laser-cut stainless steel sideplates with precision turned brass shaves.For use on twin or split backstays – forbackstay wire of up to 10mm Ø.

91 020

91 040

control the power

sna

tch

blo

cks

20

Snatch blocks

Part Sheave Sheave Rope Break SWL Length WeightNo. Ø mm width mm Ø mm Load kg kg mm g

Medium snatch blocksSnatch block + bronze snap 90 400 48 20 16 900 450 429 422

Snatch block + S/S snap 90 401 48 20 16 1100 550 362 378

Snatch block + S/S ‘D’ shackle 90 402 48 20 16 1300 650 370 316

Small snatch blocksSmall snatch block + bronze snap 90 300 35 17 12 500 250 120 203

Small snatch block + S/S snap 90 301 35 17 12 800 400 110 170

Lightweight snatch blocksSnatch block + S/S ‘D’ shackle 90 100 45 13 10 190 95 120 148


Snatch block + S/S ‘D’ shackle 90 200 57 16 12 460 230 155 227


Four sizes – acceptinglines up to 16mm Ø (5/8”)Our ever popular range of snatchblocks - of rugged constructionwith an easy open/close action.

The range features a choice ofstainless snap shackles, chromedbronze snap shackle or stainlesssteel ‘D’ shackle.

Small snatch blocksUnique to Barton, these areprobably the smallest block ofthis type available.

Extremely compact and strong,with a multitude of uses oncruising or racing yachts wherea large unit is not required.

Available with a stainless steel orchromed bronze snap shackle.

Lightweightsnatch blocksDesigned for applications ondinghies, dayboats or light cruisingyachts where a high load capacityis not required. A pivoting sideopening action allows for easyentry of sheets and lines.

Available with a stainless steelsnap shackle or ‘D’ shackle.

Important note– snatch blocks:When using snatch blocks on a toerail, a bungee line should be attachedto the becket to prevent the block‘tumbling’ and causing damageby snagging.

90 201

90 200

90 10090 101

90 402 90 401 90 400

90 30090 301


high loa

d b

locksHigh Load and Foot blocks

Part Sheave Sheave Rope Break SWL Length WeightNo. Ø mm width mm Ø mm Load kg kg mm g

High load blocksHigh load block – 50mm 82 100 50 15 12 1000 500 116 146

High load block – 65mm 82 200 65 18 16 1600 800 142 267

High load block – 85mm 82 300 85 21 18 3000 1500 185 551

Foot blocksFoot block – 50mm 82 995 50 15 12 1000 500 79 114

Foot block – 65mm 82 996 65 18 16 1600 800 100 211

Foot block – 85mm 82 997 85 21 18 3000 1500 132 427

Foot blocks with camsFoot block – 50mm 82 998 50 15 12 1000 500 84 130

Foot block – 65mm 82 999 65 18 16 1600 800 105 230

High load blocksManufactured from marine gradealuminium and ‘Spectro’ grey anodisedfor high UV stability and durability.• Sheaves are precision turned from

solid ‘Ertalyte’ bar with a profilethat is kind to modern ropes.

• Running on a large diametercentre bearing for easy runningunder high loads.

• Fitted with a stainless steelbow shackle to allow forsnag-free operation.

• Bolt-together constructionnot only adds to good looks,but allows for easydismantling shouldservicing become necessary.

• Available in three sizes, theseblocks are compatible with thetoggle connections on our ballbearing mainsheet travellers(pages 22-27).

82 100

Foot blocksFeaturing the same side plate and sheave constructionas the high load blocks detailed above.

• Hollow stainless steel rivets allowfor through-bolt fastening, givingadded strength.

• Through-bolt mounting also means thatthese blocks can easily be stacked toachieve double block capabilities. Note;stacking blocks will reduce working loads.

• Fastenings of the minimum diametersuggested should be used to gain fullload capability.

• Ensure that suitable mounting pads areused under deck.

Foot blocks with camAvailable in two sizes; specifications as perour high load foot block range. Suitablefor a multitude of uses, including lockingcontrol lines on headsail furling gear.

Max holding power of cams: 50mm – 250kg; 65mm – 300kg

82 200

82 99882 999

82 997 82 99682 995

82 300

Important note – foot blocks:Fastenings of the minimum diametersuggested should be used to gain fullload capacity. Ensure that suitablemounting pads are provided under deck.

Stacking blocks to achieve doubles willseverely reduce working loads quoted.

Barton travellers can be easily built up frommodular components to give a wide variety ofcontrol line purchase, either cleated on track ends,traveller or remotely.

The following pages explain how to make up yourown individual system by putting together modularcomponents, including a choice of three types of track.

When selecting which system will suit your requirements,ask the following questions:

1. Size of boat?

2. Control line purchase (2:1, 3:1 or 4:1)?

3. Shackle or toggle take-off?

4. Single or double take-off?

5. Cleating on car, end fittings or remote?

6. End fitting cleats straight or angled?

Guide to choice of size:

Size 1 for yachts up to 8.5m (28.5ft)

Size 2 for yachts up to 11.0m (36ft)



ma

insh

eet &

gen

oa c

ar s

yste

ms

22

Recirculating ball bearing mainsheet systems

A unique way to select the best traveller and genoa car system for yourboat and personal requirements – a truly low friction system, realisticallypriced and designed for use on both cruising and racing yachts.

Travellers, end fittings and track are all extruded from top qualitymarine grade aluminium and finished in our unique ‘Spectro’ greyanodised finish.

• Recirculating precision ground delrin ball system

• Three sizes for yachts up to 14m LOA (46ft)

• Three track options

• Construct your own system from modular components(pages 25-28) or choose one of our new pre-packagedcomplete systems (page 24)

• Single or double take off travellers

• Shackle or toggle take off travellers

• Multiple control line purchase (2:1, 3:1, 4:1)

• Cleating on end fitting or car

• Kevlar ‘K’ cam with 70° or 90° angled cleating options

• Torlon ball option

• Towable genoa cars.

TravellersAesthetic design, clean lines, high-techmaterials and finishes all go to make thisrange of traveller cars a functional andpractical enhancement to any sailboat.

All end fittings feature a soft rubberisedmoulded cap, designed to withstandhigh impact without causing damage.

Standard travellers run onprecision ground delrin balls.

A Torlon ball package is offeredwhere higher load applications arerequired. Torlon balls give up to40% more load bearing capacity.These packages are availablein all three sizes and for longor short travellers.

Double take off travellersWith either shackle or toggleattachments, these allow coarse/finetune mainsheet systems to be achieved.They can also be used with a link plate(page 27) to allow for increasedrolling load with the longer cars.

Control line sheavesIn sizes 2 and 3 these feature ourlow friction large diameter ballbearing sheave system.

Shackle take offFeature a high load forgedstainless steel pivoting shackle.

Toggle take offFeatures a solid cast stainless steelupstand with a soft rubber anti-tumblebearing fitted, preventing damage whenblocks are not under load. These takeoffs accept the swivel post from ourcruiser blocks and help achieve atruly low profile system.

Cam cleatsFrom our Kevlar ‘K’ cam range.

See page 48 for full details.

2:1 purchase system

3:1 purchase system

4:1 purchase system;cleating on end fittings

4:1 purchase system;cleating on traveller

Towable genoa carsAvailable in three sizes for yachts up to 14m LOA (46ft)– all three run on the three track profiles available.

2:1, 3:1 and 4:1 systems can beachieved with the unique Bartonmodular system. Modular componentsare listed on the following 6 pages.

Featuring a precision-turnedErtalyte sheave running on a largediameter bearing.

The bolt-through sheave design notonly looks good, but gives addedstrength to these rugged units.

Technical Length Length Weight Weight Width with Height Height MaxDetails single take off double take off single take off double take off Width control line 2:1 4:1 SWL control line

mm mm g g mm cleats mm mm mm kg Ø mm

TravellersSize 1 132 204 252 411 57 98 30 43 500 6

Size 2 166 254 547 923 70 120 44 57 700 8

Size 3 198 292 872 1378 87 130 47 65 1000 8

Length Weight Width Height SWL Sheave Ø Sheave widthmm g mm mm kg mm mm

Genoa carsSize 1 118 400 57 97 500 50 36

Size 2 145 775 70 116 700 60 36

Size 3 170 1181 87 133 1000 70 45

Width with Height Height MaxLength Weight Width control line 2:1 4:1 control line

mm g mm cleats mm mm mm Ø mm

End fittingsSize 1 67 117 59 100 39 50 6

Size 2 88 234 72 127 50 65 8

Size 3 96 362 85 137 60 74 8

Length Weight Width Sheave Ø Max control linemm g mm mm Ø mm

Control line sheave cageSize 1 41 15 38 20 6

Size 2 52 27 49 30 8

Size 3 65 42 57 35 8 23control the power

ma

insheet & g

enoa ca

r systems

Recirculating ball bearing genoa car systems

Important note: boat sizesSuggested boat sizes are given as a guidance only and assume a monohullwith boom end sheeting, loaded vertically to the traveller.Mid-boom sheeting, severely angled take offs and curved tracks can impose greaterloads and suitable allowances should be made for this. If at all unsure of your choiceit is important to seek further advice.If you are close to the maximum boat size suggested, we would advise upgradingto a torlon package, long car or the next size up.

2:1 purchase system

4:1 purchase system

control the power

ma

insh

eet &

gen

oa c

ar s

yste

ms

24

Complete pack recirculating ball bearing traveller systems

Important note: boat sizesSuggested boat sizes are givenas guidance only and assume amonohull with boom end sheeting,loaded vertically to the traveller.

Mid-boom sheeting and severelyangled take offs can impose greaterloads and suitable allowances shouldbe made for this. If at all unsure ofyour choice it is important to seekfurther advice.

If you are close to the maximumboat size suggested, we would adviseupgrading to the next size up.

Complete pack kits are not suitable foropen span applications as they requirebeam section track – see page 29.




Pre-packaged mainsheet systems with all components required in onecomplete kit – sliding bolt track, traveller, end fittings, plastic end caps, pilottrack and full fitting instructions.

Travellers, end fittings and track are all extruded from top quality marine gradealuminium and finished in our unique ‘Spectro’ grey anodised finish.

Sliding bolt track allows for a smooth, clean profile and also makes retro-fittingeasier as bolts can be slid along the extrusion to match existing fastening holes.

• Two sizes – for yachts up to 11m LOA (36ft)

• 2:1 or 4:1 purchase systems

• Recirculating precision ground delrin ball system.

Specifications Size 1 Size 2

Max boat size 8.5m 11.0m28.5ft 36ft

Track width 20mm 26mm

Track length 1.4m 1.6m

Max control line Ø 6mm 8mm

SWL 500kgs 700kgs

Fastenings 5mm 6mm

2:1 Purchase Kitwith cleats at 70° on end fittings

• 1.4m (size 1) /1.6m (size 2)sliding bolt track

• Traveller car with singleshackle take off

• End fittings (pair)• Plastic end caps (pair)• Pilot track & fitting instructions.

Size 1 Size 2

20 900 24 900

4:1 Purchase Kitwith cleats at 70° on end fittings

• 1.4m (size 1) /1.6m (size 2)sliding bolt track

• Traveller car with singleshackle take off

• End fittings (pair)• Plastic end caps (pair)• Pilot track & fitting instructions.

Size 1 Size 2

20 901 24 901

4:1 Purchase Kitincorporating cleats on traveller • 1.4m (size 1) /1.6m (size 2)

sliding bolt track• Traveller car with single

shackle take off• End fittings (pair)• Plastic end caps (pair)• Pilot track & fitting instructions.

Size 1 Size 2

20 902 24 902

24 900

24 901

24 902


ma

insheet & g

enoa ca

r systems

Traveller Carwith single shackle take offand internal control line sheaves

Size 1 Size 2 Size 3

20 101 24 101 30 101

see page 23 for specifications.

Modular Components for recirculating ball bearing traveller systems

• Recirculating precision grounddelrin ball system

• Three sizes for yachts up to 14mLOA (46ft)

• Build your choice of traveller,cleating system and end fittings.





Important note: boat sizesSuggested boat sizes are given as a guidance only and assume amonohull with boom end sheeting, loaded vertically to the traveller.Mid-boom sheeting, severely angled take offs and curved trackscan impose greater loads and suitable allowances should be madefor this. If at all unsure of your choice it is important to seekfurther advice.If you are close to the maximum boat size suggested, we wouldadvise upgrading to a torlon package, long car or the next size up.

Choose the individual components required to build the system of your choice which is the most suitable for your boat.See pages 26-28 for pre-designed combinations available.

Traveller Carwith double shackle take offand internal control line sheaves


20 103 24 103 30 103


Traveller Carwith single toggle take offand internal control line sheaves


20 105 24 105 30 105


End Fittingwith integral sheaves(supplied in pairs).


20 110 24 110 30 110


Traveller Carwith double toggle take offand internal control line sheaves


20 107 24 107 30 107


Genoa CarWith integral sheaves(2:1, 3:1 or 4:1)


20 300 24 300 30 300


End Fittingwith cleat at 90° to track(supplied in pairs).


20 113 24 113 30 113


End Fittingwith cleat at 70° to track(supplied in pairs).


20 114 24 114 30 114


Traveller CleatPlate Assembly(supplied in pairs)


20 117 24 117 30 117

Control LineSheave Cagefor use on travellersand end fittings(supplied in pairs)


20 112 24 112 30 112



ma

insh

eet &

gen

oa c

ar s

yste

ms

26

The unique Barton modular system allows a wide variety of systems to be constructed, giving multiplecontrol line options.In the following tables, order both part numbers listed (where appropriate) for the traveller illustrated.

Travellers recirculating ball bearing – single take off

Traveller Carwith single shackle take off andintegral control line sheaves 2:1 or 3:1 purchase.


20 101 24 101 30 101

Traveller Carwith single toggle take off andintegral control line sheaves 2:1 or 3:1 purchase.


20 105 24 105 30 105

Genoa CarWith integral controlline sheaves2:1 or 3:1


20 300 24 300 30 300


Traveller Carwith single shackle take off 4:1 purchase. Comprises:-


20 101 24 101 30 101

20 112 24 112 30 112Order both part numbers to achievethe product shown.

Traveller Carwith single toggle take off 4:1 purchase. Comprises:-


20 105 24 105 30 105


Traveller Carwith cleats and singleshackle take off 4:1 purchase. Comprises:-


20 101 24 101 30 101


Traveller Carwith cleats and singletoggle take off 4:1 purchase. Comprises:-


20 105 24 105 30 105


Genoa CarWith integral control line sheaves(4:1) Comprises:-


20 300 24 300 30 300


27control the power

ma

insheet & g

enoa ca

r systems

Travellers recirculating ball bearing – double take off

Traveller Carwith double shackle take off 4:1 purchase. Comprises:-


20 103 24 103 30 103


Traveller Carwith double shackle take offand integral control line sheaves

2:1 or 3:1 purchase.


20 103 24 103 30 103

Traveller Carwith double toggle take offand integral control line sheaves

2:1 or 3:1 purchase.


20 107 24 107 30 107

Traveller Carwith double toggle take off 4:1 purchase. Comprises:-


20 107 24 107 30 107


Traveller Carwith cleats and doubleshackle take off 4:1 purchase. Comprises:-


20 103 24 103 30 103


Traveller Carwith cleats and doubletoggle take off 4:1 purchase. Comprises:-


20 107 24 107 30 107


Link PlateFor long double toggle take off cars.Heavy-duty stainless plate that spanstoggles - for heavy-duty applications.


20 202 24 202 30 202

control the power

ma

insh

eet &

gen

oa c

ar s

yste

ms

28

The unique Barton modular system allows a wide variety of systems to be constructed, giving multiple control lineand cleating options for track end fittings.In the following tables, order both part numbers listed (where appropriate) for the end fitting illustrated.

End Fittings recirculating ball bearing

End Fitting4:1 purchase.

(supplied as a pair of each p/no.).


20 110 24 110 30 110


End Fittingwith cleat at 90°2:1 or 3:1 purchase.



20 110 24 110 30 110


End Fitting2:1 or 3:1 purchase.

(supplied in pairs).


20 110 24 110 30 110


End Fittingwith cleat at 70°2:1 or 3:1 purchase.



20 110 24 110 30 110


End Fittingwith cleat at 90°4:1 purchase.



20 110 24 110 30 110

20 113 24 113 30 113

20 112 24 112 30 112Order all part numbers to achievethe product shown.

End Fittingwith cleat at 70°4:1 purchase.



20 110 24 110 30 110

20 114 24 114 30 114

201 12 24 112 30 112Order all part numbers to achievethe product shown.

Torlon BallsTorlon ball packages available for all traveller sizes:

Size 1 Size 2 Size 3short long short long short long

20 200 20 201 24 200 24 201 30 200 30 201

Crash Stopfor genoa track.

(supplied in pairs).


20 310 24 310 30 310


ma

insheet & g

enoa ca

r systems

Per metre or in set lengths – choose fromthe adjacent table.Hollow section extruded aluminium track for light weight yetretaining high load capacity.

‘Spectro’ grey anodised finish is extremely durable and addsto the friction-free efficient performance of these products.


Drilled trackper metre 20 000 24 000 30 000

0.6 metre 20 010 24 010 30 010

1.2 metre 20 020 24 020 30 020

1.8 metre 20 030 24 030 30 030

2.4 metre 20 040 24 040 30 040

3.0 metre 20 050 24 050 30 050

5.0 metre 20 060 24 060 30 060

End cap (pair) 20 001 24 001 30 001

Sliding bolt trackper metre 20 002 24 002 30 002

0.6 metre 20 012 24 012 30 012

1.2 metre 20 022 24 022 30 022

1.8 metre 20 032 24 032 30 032

2.4 metre 20 042 24 042 30 042

3.0 metre 20 052 24 052 30 052

5.0 metre 20 062 24 062 30 062

End cap (pair) 20 001 24 001 30 001

Beam trackper metre 20 003 24 003 30 003

0.6 metre 20 013 24 013 30 013

1.2 metre 20 023 24 023 30 023

1.8 metre 20 033 24 033 30 033

2.4 metre 20 043 24 043 30 043

3.0 metre 20 053 24 053 30 053

5.0 metre 20 063 24 063 30 063

End cap (pair) 20 100 24 100 30 100

Track 20mm/26mm/30mm

Drilled trackThe most commonly used, drilled andcountersunk at 100mm centres, withthe first hole at 50mm from track end.


Width 20mm 26mm 30mm

Height 12mm 15mm 18mm

Fastenings 5mm 6mm 8mm

Sliding bolt trackTo allow for a smooth profile with no visiblefastenings. Also makes retro fit an easier job,as bolts can be slid along the extrusion tomatch existing fastening holes.

Ensure washers are fitted beneath track to ensure a good seal(see diagram).


Width 20mm 26mm 30mm

Height 12mm 16.5mm 19mm


Beam trackUse beam track when spanning cockpits or companionway hatches,where unsupported length is required. A minimum of threefastenings should be used on either side of the unsupported length– place fastenings at 100mm centres in supported sections.

Ensure washers are fitted under the head of the bolt and betweentrack & deck to ensure a secure seal (see diagram).


Max unsupported 400mm 700mm 800mmlength

Width W 20mm 26mm 30mm

Width W2 26mm 34mm 40mm

Height 27mm 34.5mm 40.5mm


Apply sealant

Fittingslidingbolt track

Fittingbeamtrack

Curved trackSome curving oftrack can beaccommodated,depending onwhich traveller/genoa caris selected.

Please contact usfor further advice.

24 000

24 003

24 002

20 001

24 100

Three styles of track are available– drilled, sliding bolt and beam:-

Part End Length Width Break SWL WeightNo. Fitting mm mm Load kg kg g

19mm traveller cars4 wheels plain 19 100 19900 52 38 1200 600 127

4 wheels, control line eyes 19 101 19 902 52 38 1200 600 136

4 wheels, control line sheaves 19 102 19902 52 38 1000 500 152

4 wheels, control cleats & sheaves 19 103 19902 122 75 1000 500 339

6 wheels, control line sheaves 19 105 19 902 85 38 2240 1120 284

Part Length Width WeightNo. mm mm g

19mm track end fittings (pairs)Adjustable plunger stops 19 900 38 29 83

Plastic track end 19 901 16

End fitting - horizontal sheave 19 902 45 22 44


I sec

tion

track

&tra

velle

rs

30

19mm ‘I’ section track & travellers

19 000

19mm ‘I’ section trackExtruded with a hollow section for lightweight and high load capacity.

Drilled for fastenings and plunger stops.

Supplied in metric lengths as shownin the table below.

Specifications & dimensions

Width W 19mm

Height 24mm

Width X 11mm

Fastenings Ø 5mm

Fastening centres 100mm

Plunger hole centres 50mm

Weight 479g per m

for yachts up to 7.3m (24ft) LOAA comprehensive range of traveller systems suitable for use on dinghies,dayboats and light cruising yachts.

Also ideal for use in self-tacking jib systems on larger yachts and catamarans.

Manufactured from marine grade aluminium and stainless steel. ‘I‘ sectiontrack is silver anodised. Fittings are black anodised.

• Stainless steel captive bearing ball race wheels

• Rugged, lightweight ‘I’ section track

• Various control line options

• Cam cleat versions feature ‘K cam’ Kevlar cleats.

PartNo.

19mm I section trackper metre 19 000

0.6 metre 19 010

1.2 metre 19 020

1.8 metre 19 030

2.4 metre 19 040

3.0 metre 19 050

5.0 metre 19 060

Track end cap (pair) 19 901

19 900

19 902

19 103

19 100

19 101

19 105

19 102

19 901

Curved track‘I‘ section track canbe custom curved tospecial requirements.Please enclose adetailed drawingwhen ordering,giving all dimensionsof curvature.

31control the power

Isection track &

travellers



4 wheels, control line sheave 26 102 26110 69 47 2560 1280 287

6 wheels, control blocks 2:1 purchase 26 103 26110+26902 226 47 3000 1500 560



24mm track end fittings (pairs)End fitting with sheave & cleat 26 110 90 75 412

End fitting with double sheave & cleat 26 111 90 75 96

Adjustable plunger stops 26 900 32 30 64


Crash stop 26 902 32 30 36


Important note: boat sizesSuggested boat sizes are given asguidance only and assume a monohullwith boom end sheeting, loaded verticallyto the traveller.

Mid-boom sheeting and severely angledtake offs can impose greater loads andsuitable allowances should be made forthis. If at all unsure of your choice it isimportant to seek further advice.

Crash stops should be used to preventcars from damaging track and end fittings.

26000

24mm ‘I’ section trackExtruded with a hollow section for light weightand high load capacity.

Silver anodised drilled for fastenings andplunger stops.

Supplied in metric lengths as shown in the table.


Width W 24mm

Height 28mm

Width X 16mm

Fastenings Ø 5mm



Weight 721g per m

for yachts up to 10.7m (35ft) LOAA mid range of traveller systems, manufactured from marine grade aluminiumand stainless steel. All feature heavy-duty attachments. Control line blocks (wherefitted) have low friction ball bearing sheaves, accepting lines up to 8mm diameter.‘I‘ section track is silver anodised. Fittings are black anodised.

End fittings are secured through track with track fastening bolts.

• Heavy duty take off attachments

• Four and six wheel options

• Stainless steel captive bearing ball race wheels

• Ball bearing control line blocks

• End fittings give varied control line options

• Cam cleat versions feature ‘K cam’ Kevlar cleats.

PartNo.


0.6 metre 26 010

1.2 metre 26 020

1.8 metre 26 030

2.4 metre 26 040

3.0 metre 26 050

5.0 metre 26 060


26101

26 102

Curved track‘I’ section track canbe custom curved tospecial requirements.Please enclose adetailed drawingwhen ordering,giving all dimensionsof curvature.

26902

26 900

26 901

26 110

26 103

26 104

26 111

I sec

tion

track

&tra

velle

rs

32

28mm ‘I’ section trackExtruded with a hollow section for lightweight and high load capacity.Drilled for fastenings and plunger stops.Supplied in metric lengths as shown inthe table below.


Width W 28mm

Height 34mm

Width X 17mm

Fastenings Ø 6mm



Weight 1041g per m

for yachts up to 15m (50ft) LOAA range of traveller systems for larger yachts up to 15m LOArunning on our heavy-duty track. Four and six wheel travellersshould be used on boats up to approximately 12m LOA;the eight wheel models are for larger craft. Please seenote marked *.

All feature heavy-duty attachments, through-bolted for addedsecurity. Control line blocks (where fitted) have low frictionball bearing sheaves, accepting lines up to 10mm diameter.‘I‘ section track is silver anodised. Fittings are black anodised.

End fittings are secured through track with trackfastening bolts.



4 wheels, control line sheaves 28 102 28110 88 54 2500 1250 472





28mm track end fittings (pairs)End fitting with sheave, becket & cleat 28 110 108 90 620

End fitting with double sheave & cleat 28 111 108 90 716

End fitting with double sheave, becket & cleat 28 112 108 90 724

Adjustable plunger stops 28 900 35 34 112


Crash stop 28 902 35 34 76

Curved track‘I’ section track canbe custom curved tospecial requirements.Please enclose adetailed drawingwhen ordering,giving all dimensionsof curvature.

28 10528 112

PartNo.


0.6 metre 28 010

1.2 metre 28 020

1.8 metre 28 030

2.4 metre 28 040

3.0 metre 28 050

5.0 metre 28 060


28 104

28 111

28 103

28 110

28 101

control the power


• Stainless steel captivebearing ball race wheels

• Four, six and eightwheeled options

• Rugged, lightweight‘I’ section track

• Cam cleat versions feature‘K’ cam Kevlar cleats

• End fittings give variedcontrol line options

• Ball bearing control line blocks.

*Note: for yachts over 12 metres our eight wheeled travellers must be used.These are made to order so please state requirements when ordering.

28 102

28 000

28 902

28 900

28 901

Important note: boat sizesSuggested boat sizes are givenas guidance only and assume amonohull with boom end sheeting,loaded vertically to the traveller.

Mid-boom sheeting and severelyangled take offs can impose greaterloads and suitable allowancesshould be made for this. If atall unsure of your choice it isimportant to seek further advice.

Crash stops should be used toprevent cars from damagingtrack and end fittings.

33

sliders &

genoa

cars for T tra

ck


20mm ‘T’ section track, sliders, genoa cars

Part Length Width Height Sheave Ø Max Rope Ø Break SWL WeightNo. mm mm mm mm mm Load kg kg g

Genoa cars & towable genoa carsGenoa car 22 100 60 34 65 30 10 1160 580 119

Towable genoa car 22 200 110 34 65 30 10 1160 580 127

Towable genoa car 2:1 purchase 22 220 138 34 65 30 10 1160 580 160

Towable car end fittingsTrack end 22 210 80 32 36 30 8 – – 97

Track end + becket 22 221 80 32 47 30 8 – – 99

Mainsheet/genoa slides & stopsMainsheet slide 22 300 60 32 35 – – 1200 600 55

Genoa slide 22 301 60 32 35 – – 1200 600 68

Plunger stop 22 900 30 32 30 – – – – 30

Bullseye & fairlead slidesBullseye slide 22 310 80 32 60 – 14 400 200 150

Fairlead slide 22 311 90 32 42 – 12 400 200 102

Stand up blockStand up block 22 312 75 32 115 35 8 740 370 195

Track end caps (pair)Track end caps (supplied in pairs) 22 901 20 – – – – – – 55

20mm ‘T’ section trackFor use with all slidersfeatured on this page.Drilled for fastenings andplunger stops. ‘Spectro’grey anodised and suppliedin metric lengths.


Width W 20mmWidth X 11mm

Height H 8mmHeight J 2.5mm

Fastenings Ø 5mm



Weight 270g per m

Plain bearing genoa cars and slidersA lightweight and compact range of plain bearingextruded aluminium sliders, running on 20mm (3/4”)‘T’ track and finished in our unique ‘Spectro’ greyanodised finish.

This useful range will find a wide variety ofapplications on larger dinghies, dayboats andlight cruiser/racers.

PartNo.

20mm T section trackper metre 22 000

0.6 metre 22 010

1.2 metre 22 020

1.8 metre 22 030

2.4 metre 22 040

3.0 metre 25 050

5.0 metre 22 060

Track end caps (pair) 22 901

22 312

22 901

22 900

22 221

22 220

22 300

22 200

22 310

22 311

22 100

22 301

22 210

22 000

Genoa car withplunger stopFeatures a precision turned Ertalytesheave, through-bolted for extrastrength. The positive actionplunger mechanism has aneasy-grip knob.

Towable genoa carsWith tow eye or sheave in place ofplunger, allowing a control line tobe lead aft so that genoa caradjustments can be made fromthe cockpit. Use in conjunctionwith end fittings shown.

Genoa andmainsheet slidesA strong unit which will acceptmost Barton blocks – with astainless steel attachment loop,through-bolted for strength.

Bullseye slideWith a swivelling bullesye that willalways accommodate the correctangle of sheeting. Accepts linesup to 14mm diameter. A stainlesssteel insert is provided toprevent wear.

Fairlead slideFeatures a plain moulded plasticfairlead fitted to an adjustableslide. Accepts lines up to 12mmdiameter; not suitable forhigh loads.

Stand up blockHas a stainless eye fitted to astainless loop, through-bolted forstrength. The moulded plasticspring/gaiter prevents the blocktumbling or ropes snagging.Supplied with a size 2 blockaccepting lines up to8mm diameter.

Plunger stopsFor use with mainsheet orgenoa track sliders. Sold singly.

slid

ers

&g

enoa

ca

rs fo

r T tr

ack

34

Plain bearing genoa cars, sliders andspinnaker pole slides

A popular range of genoa cars and sliders designed to run on25mm (1”) ‘T’ track. All are manufactured from high qualitymarine grade aluminium and finished with our unique‘Spectro’ grey anodised finish for added protection.

All cars and sliders featured on these pages have mouldednylon inserts to ensure free, smooth running under load andprevent damage to finish or potential corrosion.

• ‘Spectro’ grey anodised finish

• Stainless plunger stops with positive action

• Moulded nylon slide inserts ensure free running

• Large, easy-grip plunger knobs.

Important note – foot blocks:Fastenings of the minimum diameter suggested should be used to gain full load capacity. Ensure that suitable mounting pads are provided underdeck. Stacking blocks to achieve doubles will severely reduce working loads quoted.



25mm ‘T’ section trackFor use with all sliders featuredon this page. Drilled forfastenings and plunger stops.‘Spectro’ grey anodised andsupplied in metric lengths.


Width W 25mm

Width X 14mm

Height H 10mm

Height J 4mm

Fastenings Ø 5mm



Weight 441g per m

25 000

25 900

Part Sheave Sheave Rope Break SWL Length Fastenings WeightNo. Ø mm width mm Ø mm Load kg kg mm mm g

Foot blocksFoot block – 50mm 82 995 50 15 12 1000 500 79 3 x M6 114

Foot block – 65mm 82 996 65 18 16 1600 800 100 2 x M6/1 x M8 211


Foot blocksDesigned for use with the genoa cars shown in this range,these strong foot blocks have a three-bolt fixing and can bestacked to achieve doubles (see note below). ‘Spectro’grey finish. Precision turned Ertalyte sheaves run on largediameter centre bearing to give low friction performanceunder high loads.

See page 21 for further details and our foot blockwith cam range.

25 901

82 996 82 995

25 220

25 100

25 200

25 221

25 210

35

sliders &

genoa

cars for T tra

ck

control the power



Genoa cars & towable genoa carsGenoa car 25 100 80 42 87 40 2 x 12 2280 1140 247

Towable genoa car 25 200 127 42 87 40 2 x 12 2280 1140 258

Towable genoa car 2:1 purchase 25 220 170 42 87 40 2 x 12 2280 1140 297


Track end + becket 25 221 88 37 50 35 8 – – 121


Genoa slide 25 301 80 42 40 – – 2860 1430 123

Plunger stop 25 900 30 33 34 – – – – 36

Bullseye slideBullseye slide 25 303 80 42 60 – 14 – – 184

Stand up blocksStand up block – size 3 25 310 80 42 120 45 10 980 490 223

Stand up block – size 4 25 311 80 42 142 57 12 1580 790 312


PartNo.


0.6 metre 25 010

1.2 metre 25 020

1.8 metre 25 030

2.4 metre 25 040

3.0 metre 25 050

5.0 metre 25 060


Part Length Width Height Eye internal WeightNo. mm mm mm Ø mm g

Spinnaker pole slidesSpinnaker pole slide 25 302 80 42 74 35 237

Towable spinnaker pole slide 25 304 80 42 74 35 253

25 310

25 311

25 300

25 301

25 303

25 304

25 302

Genoa car with plunger stopsFeatures precision turned Ertalyte sheaves running ona large diameter centre bearing, for friction-freeperformance under load. Sheaves are designed withextra width to accept two sheets. The sheave axle isthrough-bolted and riveted for extra strength.

Towable genoa carsWith tow eye or sheave in place of plunger, allowing acontrol line to be lead aft so that genoa car adjustmentscan be made from the cockpit. Use in conjunction withend fittings shown.

Genoa and mainsheet slidesHave a heavy duty stainless steel attachment loop,through-bolted and riveted for extra strength. These unitswill accept most Barton blocks featured on pages 6-17.

Bullseye slideFeatures a swivelling bullseye that will alwaysaccommodate the correct angle of sheeting. A stainlesssteel insert is provided to prevent wear. Accepts linesup to 14mm diameter.

Spinnaker pole slideHave a heavy duty stainless steel ring welded to anattachment plate which is through-bolted to the slide.Generous ring opening to accept most pole ends.Towable spinnaker pole slide has eyes fitted toboth ends of the slide for the attachment of control lines.Use with 25 210 end fittings.

Stand up blocksHave a stainless steel eye fitted to a stainless steel loop,through-bolted for strength. The moulded plastic spring/gaiter prevents the block tumbling or ropes snagging.Two sizes are available – for 10mm and 12mm lines.

slid

ers

&g

enoa

ca

rs fo

r T tr

ack

36

Plain bearing genoa cars, slidersand spinnaker pole slides, plusstand up blocks

A popular range of genoa cars and sliders designed to runon 32mm (11/4”) ‘T’ track. All are manufactured from highquality marine grade aluminium and finished with ourunique ‘Spectro’ grey anodised finish for added protection.

All cars and sliders featured on these pages have mouldednylon inserts to ensure free, smooth running under loadand prevent damage to finish or potential corrosion.

All genoa cars in this range are available in a heavy-dutyversion for larger craft or for larger load applications.

• ‘Spectro’ grey anodised finish

• Stainless steel plunger stops with positive action

• Moulded nylon slide inserts ensure free running

• Large, easy-grip plunger knobs

• Heavy-duty genoa car options.

control the power


32mm ‘T’ section trackFor use with all sliders featuredon this page. Drilled forfastenings and plunger stops.‘Spectro’ grey anodised andsupplied in metric lengths.


Width W 32mm

Width X 20mm

Height H 15mm

Height J 5mm

Fastenings Ø 6mm



Weight 756g per mtre

32 000

32 900

Part Sheave Sheave Rope Break SWL Length Fastenings WeightNo. Ø mm width mm Ø mm Load kg kg mm mm g

Foot blocksFoot block – 50mm 82 995 50 15 12 1000 500 79 3 x M6 114



32 901

82 996 82 995

32 100

32 221

32 220

32 101

32 200

32 201

32 211

Important note – foot blocks:Fastenings of the minimum diametersuggested should be used to gain fullload capacity. Ensure that suitablemounting pads are provided underdeck. Stacking blocks to achievedoubles will severely reduceworking loads quoted.

32 210

Foot blocksDesigned for use withthe genoa cars shown inthis range, these strongfoot blocks have athree-bolt fixing and canbe stacked to achievedoubles (see note below).‘Spectro’ grey finish. Precisionturned Ertalyte sheaves run on largediameter centre bearing to give low frictionperformance under high loads.See page 21 for further details and our foot block with cam range.

32 301

Part Length Width Height Eye internal WeightNo. mm mm mm Ø mm g

Spinnaker pole slidesSpinnaker pole slide 32 302 109 52 80 40 357

Towable spinnaker pole slide 32 304 109 52 80 40 359

37

sliders &

genoa

cars for T tra

ck




Genoa cars & towable genoa carsGenoa car 32 100 109 52 102 50 2 x 16 3280 1640 469

Genoa car – heavy-duty 32 101 127 55 117 60 2 x 16 5970 2985 728

Towable genoa car 32 200 170 52 102 50 2 x 16 3280 1640 503

Towable genoa car – heavy-duty 32 201 190 55 117 60 2 x 16 5970 2985 749

Towable genoa car 2:1 purchase 32 210 220 52 102 50 2 x 16 3280 1640 561

Towable genoa car 2:1 purchase – heavy-duty 32 211 235 55 117 60 2 x 16 5970 2985 820


Track end + becket 32 221 109 47 58 45 10 – – 236


Genoa slide 32 301 109 52 50 – – 2980 1490 254

Plunger stop 32 900 35 42 40 – – – – 70

Stand up blocksStand up block – size 5 32 310 109 52 150 54 12 1800 900 450




PartNo.


0.6 metre 32 010

1.2 metre 32 020

1.8 metre 32 030

2.4 metre 32 040

3.0 metre 32 050

5.0 metre 32 060


Genoa cars with plunger stopsFeature precision turned Ertalyte sheaves running ona large diameter centre bearing, for friction-freeperformance under load. Sheaves are designed withextra width to accept two sheets. The sheave axle isthrough-bolted and riveted for extra strength.

Towable genoa carsWith tow eye or sheave in place of plunger, allowing acontrol line to be lead aft so that genoa car adjustmentscan be made from the cockpit. Use in conjunction withend fittings shown.

Genoa and mainsheet slidesWith a heavy-duty stainless steel attachment loop,through-bolted and riveted for extra strength. These unitswill accept most Barton blocks featured on pages 6-17.

Spinnaker pole slideHas a heavy duty stainless steel ring welded to anattachment plate which is through-bolted to the slide.Generous ring opening to accept most pole ends.

Towable spinnaker pole slide has eyes fitted toboth ends of the slide for the attachment of control lines.Use with 32 220 end fittings.

Stand up blocksHave a stainless steel eye fitted to a stainless steelloop, through bolted for strength. The mouldedplastic spring/gaiter prevents the block tumbling orropes snagging. Three sizes are available – for linesup to 14mm.

32 311

32 310

32 304

32 302

32 300

32 312

Rope clutchesManufactured from high grade plastics and aluminium with ‘Spectro’grey anodised finish.

Lines can be drawn through the clutch in the locked position as the linemoves freely in the direction of pull and is restricted from returning bya spring-loaded cam mechanism.

This compact range is suitable for securing halyards and control lineson yachts up to approx 30ft – or for lighter duties on large craft.

dec

kor

ga

nise

rs


38

Deck organisers and clutches

Part Length Width Height WeightNo. mm mm mm g

Size 1 deck organisers2-sheave 81 582 115 28 25 108

3-sheave 81 583 157 28 25 155

4-sheave 81 584 200 28 25 200

5-sheave 81 585 244 28 25 244

6-sheave 81 586 287 28 25 295

Size 2 deck organisers2-sheave 81 682 148 38 28 205

3-sheave 81 683 205 38 28 290

4-sheave 81 684 262 38 28 378

5-sheave 81 685 318 38 28 465

6-sheave 81 686 376 38 28 555

Specifications Size 1 Size 2

Sheave Ø 32mm 44mmSheave width 16mm 17mm

Fastenings 6mm 8mm

Max line Ø 12mm 14mm

Hole centres 43mm 58mm

Available in two sheave sizes andin 2, 3, 4, 5 and 6-sheave modelsDesigned for use when leading control lines andhalyards across the coach roof and back tothe cockpit.

This range features aluminium construction with‘Spectro’ grey anodised finish. Sheaves are frommoulded acetal with hollow stainless rivets toallow easy and tidy fitting.

81 586

81 585

815 84

81 582

815 83

80 500

80 501

80 502

Specifications

Max holding capacity 350kg

Max rope capacity 10mm

Fastenings 6mm


Rope ClutchSingle rope clutch 80 500 107 28 62 250

Double rope clutch 80 501 107 54 62 480

Triple rope clutch 80 502 107 80 62 710

Locking levers comein grey, red andwhite and a set ofmarking stickersis included.

39control the power

clutchesBarton D0550 clutches

An all-new design for cruising andracing yachts, offering a holding powerof up to 550kgs (see chart below).

Modern, high-performance materialsManufactured from modern lightweight materials, the DO550 mouldedparts are from high-grade plastics which are strong, light and impact-resistant. Cams and bases are from marine grade aluminium, ‘Spectro’anodised for long life in the harsh marine environment.

True clutch mechanismThis true clutch mechanism allows line to be adjusted through theunit in the closed, locked position with minimal slippage. Releaseunder load is positive and requires little effort.

The mechanism’s opening and closing action is precise and easy tooperate, even with cold wet hands. A positive handle lock in theclosed position is also featured.

Kind to linesThe clutch’s cam and base, manufactured from high grade extrudedaluminium, feature a specially tempered tooth design which allows formaximum grip with minimal slippage, whilst being kind to your lines.

Stainless steel rope fairleads are fitted to both line entry and exit points;a feature which help to prevent wear to both clutch and lines.

Bolt-together constructionfor straighforward servicingThe DO 550 clutch range features the advantage of a bolt-togetherconstruction which allows for ease of servicing and replacement of parts.A full range of components is available from your Barton stockist.

Ergonomically designed handleThe handle is strong and easy to grip, with a positive smooth lockand unlock action.

A unique feature of this new design is the removable insert on thetop face of the handle. These inserts are available packaged separatelywith a selection for both cruising and racing yachts.

81 540 ‘Cruiser’ insert pack contains: Main, Genoa 1, Spin Halyard 1,Topping Lift, Spin pole up, Spin pole down, Blank.

81 540 ‘Racer’ insert pack contains: Reef 1, Cunningham, Reef 2, Kicker,Mainsheet, Genoa Furling, Genoa 2, Spin Halyard 2, Backstay, Outhaul,Downhaul, Blank.

Specifications

Max holding power 550kg

Rope capacity up to 12mm

Fastening diameter 6mm


Important fitting notes: rope clutches

• When fitting ensure a fair lead straight through the clutch to prevent wearto side plates and/or reduced load capabilities.

• For best performance site clutch approximately 2ft (600mm) forward ofthe winch to ensure a fair lead both vertically and horizontally.

• Use Barton deck organisers forward of the clutch to gain perfect alignment.• Always use a bolt-through fastening with a suitable sealant.• A drilling template is provided on our packaging for your convenience.

PartNo.

Printed handle inserts‘Cruiser’ handle insert pack (7 inserts) 81 540

‘Racer’ handle insert pack (12 inserts) 81 541

Spare partsHandle 81 545

Cam 81 546

Base 81 547

Set of 4 x pan head machine screws & nuts 81 548

8mm

10mm

12mm

0 200 400 600

line Ø

DO550 clutches – holding power

kg


DO550 clutchesSingle DO 550 clutch 81 500 133 38 68 343

Double DO 550 clutch 81 501 133 65 68 544

Triple DO 550 clutch 81 502 133 91 68 754

81 500

81 501

81 502

81 54181 540

control the power

win

ches

& w

inch

ha

ndle

s

40

Winch handles & accessories

Part Length WeightNo. mm g

Aluminium winch handles8” Aluminium handle 21 001 225 290

8” Aluminium handle – locking 21 011 225 302

10” Aluminium handle 21 002 280 335

10” Aluminium handle – locking 21 022 280 347

Floating winch handles10” Floating handle – locking 21 033 290 267

8” Floating handle – locking 21 034 235 306

Special handlesHandle for 602 winch 21 000 250 420

Reefing gear handle 21 323 – 160

Winch handle pocketFabric winch handle pocket 21 050 300 70

Winch handle holderWinch handle holder 21 055 52mm Ø base

A range of light duty winch handles and accessories,manufactured from quality modern materials.All designed to fit international star socketsand standard deck filler caps.

Extruded aluminium handlesLight duty, inexpensive handles in two lengths andeither plain or locking. Both styles have easy-griproller handle and ‘Spectro’ grey anodised finish.

Important note:These handles should not be used on large, two-speedwinches as they are not designed for high loads in ananti-clockwise direction. SWL 40kg.

Floating handlesFeaturing a moulded body with an integralmoulded handle shaft. The bright red handleroller is mounted on ball bearing for friction-freeoperation. Locking mechanism is with a positive,easy action thumb switch. Handle floats in saltand fresh water.

Important note:Floating winch handles have a SWL of 40kg andare intended for lightweight use only.

Chrome handleFor use with the now-discontinued ‘602’bottom handle winch.

Winchhandle pocketManufactured fromhard-wearing syntheticfabric which will notdegrade like mouldedplastic versions.

Winchhandle holder

Utilises the star socketsystem to provide a

unique way of stowingwinch handles.

Mounts ontobulkheads or

locker lids.Requires 3 x 4mm

fastenings.

Base Ø 52mm

21 050

21 055

21 000

Reefinggear handleFor use with the now-discontinued ‘323’roller reefing gear.

21 323

21 001

21 011

21 002

21 022

21 034

21 033


winches &

winch ha

ndles

Barton composite winches & the Barton ‘Wincher’

Part Base Ø Drum Ø WeightNo. mm mm g

Sheet winchesSingle speed 8:1 21 200 101.6 66.7 835

Twin speed 16:1 21 201 114.3 66.7 1264

Twin speed 23:1 21 202 114.3 66.7 1600

Spares kitsSingle speed 8:1 21 210

Twin speed 16:1 21 211

Twin speed 23:1 21 212

Snubbing winchesSnubbing winch 21 100 64 37 175

Snubbing winch 21 101 75 50 230

Barton composite winchesA versatile alternative to conventional aluminium winches, the Bartonrange of composite winches offer significant cost and weight savingsand are truly low maintenance.

Virtually self-lubricating, friction-free and corrosion resistant, theingenious use of advanced materials ensure consistent performanceand reliability.

• Three models available – a single-speed 8:1 and twotwin-speeds; 16:1 and 23:1

• Suitable as primaries for yachts up to 10m (30ft) or asspinnaker /halyard winches on larger craft

• Red, blue and green coloured top rings are included,giving you the ability to colour-code winches to controllines, port or starboard, or just to match the colourscheme of your boat

• Comprehensive spares kits available.

Part Max drum Ø Max rope Ø WeightNo. mm mm g

Barton ‘Winchers’Wincher small (pair) 21 641 64-70 8-10 202

Wincher medium (pair) 21 642 70-80 10-14 223

Wincher large (pair) 21 643 80-90 12-14 278

Wincher ex large (pair) 21 644 90-100 12-16 387

21 202

Snubber winchesNeat, lightweight units which are ideal for use onlarger dinghies and dayboats. Manufacturedfrom glass fibre reinforced nylonwith anodised aluminium ribs.

21 201

21 200

The Barton ‘Wincher’A specially designed rubber moulding which fits over the topof standard winches, converting them to self-tailing.

This simple operation works when the line is sheeted under load,which means the coils climb up the winch drum and then becomegripped by the underside of the Wincher’s rubber body.

Cleating is achieved by lockingthe sheet into the Wincher’s

ribbed central groove.

Barton ‘Winchers’ are easyto fit and available in foursizes to suit a wide rangeof popular winches.

Full fitting instructionsare included.

21 101

21 100

Self-TailingFor self-tailing, the entirewinch must be stacked

with line.

Cleating...To cleat, lock sheet into

ribbed groove.

21 643


sail

hand

ling

42

Lazy jack kits

PartNo.

Lightweight lazy jack kitsFor yachts up to 9m (30ft) 41 140

Cascade system for yachts up to 10.5m (35ft) 41 143

Lazy jack kitsFor yachts up to 9m (30ft) 41 150

For yachts up to 12m (40ft) 41 151

For yachts over 12m (40ft) 41 152

Cascade system for larger yachts 41 153

Lazy jack kitsAllow mainsails to be reefed or dropped with ease, byretaining the sail between lines running from the mast(near the hounds) to the boom. These lines can be slackenedwhilst sailing to avoid restricting sail shape.

Ideal for use with fully battened or conventional mainsails,these complete kits contain stainless steel, plastic-coatedwires with blocks and fixing eyes attached. High qualitybraided line, all fixings and comprehensive fittinginstructions are also included.

A unique feature of Barton lazy jack kits is the softplastic block covers which prevent sail chafe andenhance appearance.

Lightweight lazy jack kitsThese all-rope kits still feature our unique block covers butare intended for smaller yachts or lightweight use.

Not recommended for large yachts or fully battened mains.We also recommend that the use of a topping lift is retained.

Cascade lazy jack kitsAvailable in standard and lightweight format. For use withlonger boom lengths or where more sail control is required.

Standard lazy jack kitsNo modifications to sail, mast orboom required.

Blocks, cleats, mounting eyes andfixings included in the kit.

Chafe coversprevent blocksfrom wearing sail Nylon-coated

stainless wire

High qualitybraided line

High qualitycheek block

Adjustmentcleat

Stainless steelpad eyes

Cascade lazy jack kitsBlocks, cleats, mounting eyes and

fixings included in the kit.

60 750

PartNo.

Mast stepMast step (stainless steel) 60 750

Important note:mast stepsMast steps shouldalways be used inconjunction with abosun’s chair.

Always have a crewmember at hand tocontrol the halyard.

Do not go aloft barefootand always put safetyfirst when going aloft.

Mast stepLow profile, lightweight hinged mast step, manufacturedfrom bright polished stainless. Featuring a secure and positive

hinge action to ensure that the product is rattle-free. The foot hold area has a toothed non-slipsurface and the profile turns up at the out-

board end for a firm and secure foothold.

Secure using 4 x 5mm pop rivets and fitat 500mm spacing (as shown in theadjacent diagram).

41 150

41 140

41 143

43control the power

sail ha

ndling

Reefing kits & hooks

41 496

Single line reefing kitA boxed complete single-line reefing kit thatallows reefing lines to be led aft to the safetyof the cockpit.

This system makes reefing your mainsail a quickand easy operation – just lower the main to apredetermined mark on the halyard, tensionthe reefing line and re-trim the sail.

Supplied as a complete set with all the partsand fixings required, together with full fittinginstructions. All you need to provide is a lineand a cleat or stopper.

Slab reefing kitsSupplied with sliding blocks which are held in placewith spring-loaded plungers. Manufactured fromstainless steel and ‘Spectro’ anodised aluminium.Available in two sizes and complete with sufficientlength of ‘T’ track and end stops.

Specifications

41 483 – supplied with 60cm of 25mmanodised ‘T’ track

41 496 – supplied with 100cm of 32mm

anodised ‘T’ track

PartNo.

Single line reefing kitFor yachts up to 9m (30ft) 41 130

Slab reefing kitsFor yachts up to 8.5m (28ft) 41 483

Spare slider for above 41 484

For yachts up to 12m (39ft) 41 496

Spare slider for above 41 497

Plain Ball-bearing Sheave Ø Max line Ø Max tube Øsheave sheave mm mm mm

Stanchion lead blocks

Single stanchion – size 2 02 190 12 190 35 8 25

Double stanchion – size 2 02 290 12 290 30 10 25



Stanchion bullseye

Stanchion bullseye 60 142 bullseye internal diameter 17mm

PartNo.

Reefing hooksBoom fitting (pair) 41 517

Gooseneck or stemhead fitting 41 518

Reefing/gooseneck hooksManufactured in stainless steel, both thesetypes of hook are used in conjunction with slabreefing kits for securing the mainsail tack.

Type 41 517 is supplied in pairs and is intendedfor mounting either side of the boom atgooseneck level.

Type 41 518 can be mounted above thegooseneck or can be used at the stemheadto accept a jib tack.

Stanchion lead blocksMainly used for leading headsail furling linesaft, Barton stanchion blocks are available inthree sizes to suit most applications.

Double blocks are designed for use with endlessline systems and can easily be taken apart toaccept pre-spliced lines.

A larger size 4 block should be used for finaltake-off, especially if the furling line is to belead to a winch.

All stanchion blocks are available with eitherplain or ball-bearing sheave.

41 130

41 483 41 517

41 518

02 190

03 190

04 190

60 142

02 290

control the power

44

Special cleats

51 250

Clamp-on cleatsExclusive to Barton, this unique design features an opening basewhich fits over existing ‘T’ track. The clamp design then screwsfirmly into place, allowing this cleat to be fixed in any positionon your track in seconds.

• Leaves deck clear when not in use• Fitted, adjusted or removed in seconds• Position exactly where required along existing ‘T’ track• Available for 25mm and 32mm ‘T’ track.

51 320

Part Cleat Length T track WeightNo. material mm width mm g

Clamp-on cleatsClamp-on cleat 51 250 Ali 175 25 260

Clamp-on cleat 51 320 Ali 205 32 389

Sliding cleats165mm sliding cleat 51 253 Nylon 165 25 134

200mm sliding cleat 51 254 Nylon 200 25 178

175mm sliding cleat 51 322 Ali 175 32 328

205mm sliding cleat 51 323 Ali 205 32 402

Stanchion cleatStanchion cleat 52 100 Nylon 111 – 90

Shroud cleatsShroud cleat 52 110 Nylon 100 – 26

Shroud cleat with eye 52 111 Nylon 100 – 26

Stanchion bullseyeStanchion bullseye 60 142 Nylon bullseye int. Ø 17mm

Line TamerLine tamer grey (pair) 52 000 Nylon 73 – 12

Line Tamer white (pair) 52 001 Nylon 73 – 12

51 253

51 254

51 323

51 322

Fits standardsection ‘T’ trackAll stainless construction

with cast aluminium cleat

Heavy-dutyhinge allowseasy positioningover track

Easy to use,clamp-on action

Sliding cleatsA cost-effective solution to fitting a mid-ship spring cleat whereaccess under the side deck is limited - simply remove a genoa trackend stop, slide on the cleat and lock it in the desired position.When not in use, slide the cleat to one end of the track, or leaveoff one track end permanently to enable easy removal of cleat.Alternatively, fit a short length of track in the desired position sothat cleats can be fitted when required and removed when not inuse – reducing deck clutter and rope snags.

• Available for 25mm and 32mm ‘T’ track, eachin two sizes

• 25mm cleats have an extruded aluminium basewith a moulded nylon cleat and screw lock

• 32mm cleats have an extruded aluminium base,cast aluminium cleat and plunger type lock.

The Barton ‘Line Tamer’A new line storage device designed to keep cockpits free fromun-used lines and halyards. A smooth profile ensures no snaggingas crew members brush past. Sold in pairs in grey or white.

Full fitting instructions are included. Suitable for rope coils ofup to 20cm diameter.

Important note:clamp-on cleatClamp-on cleats will only work correctlyand safely with ‘T’ section track.

Stanchion cleatDesigned to fit stanchions orpushpit/pullpit tubes – fits inseconds and features softnylon jaws that will notdamage the tube.

52 111

60 142

52 100

52 110

Shroud cleatsTwo handy cleats that simply clamponto shroud wire (max 8mm Ø)without causing damage.

52 110 is a plain cleat for flaghalyards etc.

52 111 features a wide eye openingfor stowage of halyard shackles.

clea

ting

52 000


cleating

Fairleads, cleats and thimbles

Part Length Width Fastenings Ø Weight Max Rope ØNo. mm mm mm g mm

Fairleads (pairs)Nylon fairleads (pair) 60 160 115 25 5 72 10

Nylon fairleads (pair) 60 161 155 34 6 140 12

Part Length Fastenings Ø Weight Bore (int Ø)No. mm mm g mm

Tubular CleatsTube cleat 52 120 55 4 4 8

Tube cleat 52 121 80 6 13 13

Part Max rope Ø Fastening centres Fastenings Ø Holding powerNo. mm mm mm kg

Aluminium cam cleatsAluminium cam cleat midi 70 400 10 37 5 180

Ali cam cleat midi + f/lead 70 401 10 37 5 180

Aluminium cam cleat maxi 70 500 14 50 5 230

Ali cam cleat maxi + f/lead 70 501 14 50 5 230

Budget cam cleatsBudget cam cleat mini 70 600 10 30 4 –

Budget cam cleat midi 70 601 6-12 40 5 –

Budget cam cleat maxi 70 602 10-14 50 5 –

Part Length Fastenings Ø WeightNo. mm mm g

Open nylon cleatsOpen nylon cleat 52 140 75 3 6

Open nylon cleat 52 141 100 4 12





Part Length Width Max rope ØNo. mm mm mm

Nylon thimblesNylon thimble 60 404 35 26 6

Nylon thimble 60 405 38 28 8



Nylon fairleadsMoulded from tough black nylon with smooth,snag-free design. Supplied in handed pairs.

Tubular cleatsAvailable in 2 sizes, these handy cleats havemany uses where light loads are expected.

Aluminium cam cleatsAvailable in two sizes, accepting lines up to14mm. A well-proven design; extremely strongand rugged, with a hard anodised satin finish.Bases on the fairlead models are fromstainless steel.

Budget cam cleatsOf the same design as our ‘K’ cam range (page48), this low cost range features camsmoulded from light grey glass-reinforced nylon.

All ‘K’ cam accessories shown on page 48are compatible.

Open (horn) cleatsA wide range of open horn cleats mouldedfrom high strength black nylon.

ThimblesA range of thimbles mouldedin white nylon.

52 14552 144

52 143

52 142

52 141

52 140

52 120

52 121

60 161

60 160

70 400

70 401

70 500

70 501

60 404 60 40760 405 60 406

70 602 70 601 70 600


46

Dinghy & dayboat fittingsd

ing

hy s

aili

ngFurling gearSingle line operation for dinghies, dayboatsand light cruising yachts – two drum sizeswork with a common top head swivel. All havestainless steel ball races for smooth operation.

Drums are moulded from glass fibre reinforcednylon with stainless steel swivel and ballbearing assemblies.

Top head swivel is from machine-turned solidaluminium with stainless steel ball bearing.

Mainsheet swivelswith cam cleatSwivel block accepts lines up to 10mm Øand features a fully articulated block withanti-tumble spring and ‘K’ cam cleat.

Swivel bullseye accepts lines up to12mm Ø and features a stainless steelinsert and ‘K’ cam cleat.

Part Drum Ø Sail area Break load SWL WeightNo. mm sq ft kg kg g

Furling gearsFurling drum 42 334 76 60 1108 554 218Furling drum 42 335 95 100 1108 554 281Top swivel 42 336 25 100 1108 554 55

Part Max line Ø Base Ø Fastenings Ø WeightNo. mm mm mm g

Mainsheet swivels with camSwivel block with cam 42 600 10 58 5 250Bullseye swivel with cam 42 601 12 58 5 217

Part Length Fastenings Ø Max line Ø WeightNo. mm mm mm g

FairleadsFairlead + cam (handed pair) 42 102 90 5 12 732Sheet fairlead 42 200 65 5 14 16Spinnaker fairlead 42 201 75 4 8 8

Part Bore Ø Cutting Ø Fastenings Ø WeightNo. mm mm mm g

Drain bungs & socketsBung & socket – black 42 356 15 22 4 11Bung only – black 42 357 15 – – 7Bung & socket – white 42 358 15 22 4 11Bung only – white 42 359 15 – – 7

Part Strap width Pintle Ø Fastenings Ø WeightNo. mm mm mm g

Rudder & transom fittingsRudder pintle 42 419 19 9.5 5 91Rudder pintle 42 422 22 9.5 5 95Rudder pintle 42 435 35 9.5 5 104Rudder pintle 42 450 50 9.5 5 114Rudder gudgeon 42 519 19 – 5 81Rudder gudgeon 42 522 22 – 5 82Rudder gudgeon 42 535 35 – 5 91Rudder gudgeon 42 550 50 – 5 101Transom pintle 42 400 – 9.5 5 70Transom gudgeon 42 500 – – 5 30

Rigging adjusterRigging adjuster 42 700

42 334 42 335

42 357 42 356

42 400

42 500

42 519

42 700

42 419

42 359 42 358

42 600

42 336

42 201

42 601

42 102

42 200

FairleadsFairleads with plunger andcam cleat for use on 20mm ‘T’ track(see page 33 for complete range of20mm ‘T’ track fittings). Sold in handedpairs. Includes budget cam cleat fixedon stainless steel plate.

Sheet fairlead – a moulded plasticfixed fairlead.

Spinnaker fairlead – a mouldedplastic sheet fairlead with snap in/outhook design.

Drain bungs & socketsThis screw-type drain bung andsockets is still among the best available.Supplied with rubber ‘O’ ring fora watertight seal. Available inblack or white.

Rudder & transom fittingsManufactured from stainless steel with tough nylonsurrounds. A wide range of rudder fitting widthsare available.

Rigging adjusterManufactured from 16mm stainless steel plate– allows for total 50mm adjustment in 10mm steps.Clevis pin 5mm Ø. Overall length 91mm.

47control the power

tiller extensionsTiller extensions

43 103

PartNo.

Ali extensions – plain buttonTiller extension – ali – plain button 600mm 43 101

Tiller extension – ali – plain button 700mm 43 102





Ali extensions – golf gripTiller extension – ali – golf grip 600mm 43 201

Tiller extension – ali – golf grip 700mm 43 202





Plastic extensions – plain buttonTiller extension – plastic – plain button 600mm 43 001

Tiller extension – plastic – plain button 700mm 43 002



Plastic extensions – golf gripTiller extension – plastic – golf grip 600mm 43 011

Tiller extension – plastic – golf grip 700mm 43 012



Part Length Tube int Ø WeightNo. mm mm g

Flexible tiller jointsFlexible tiller joint 43 600 58 13 20

Light flexible tiller joint 43 601 58 13 20

43 102

43 101

43 10443 204

43 203

43 202

43 201

43 600

Barton tiller extensionsManufactured from 15mm diameter aluminium orextruded PVC tube and available in a wide varietyof lengths.

All Barton tiller extensions feature our flexible joint whichcan easily be removed from the tiller when required.

• Aluminium extensions in ‘Spectro’ greyanodised material.

• Plastic extensions in heavy-duty, UV-stabilisedgrey PVC tube, manufactured especiallyfor Barton.

• Both types available with either golf gripor plain button end options.

Flexible tiller joints

Manufactured from high-tech polymers to withstandcountless tiller flexings. The joint can easily be removedfrom the tiller assembly by popping off the snap-on cover.

Two versions are available – the smaller diametergiving a softer action for shorter extensions.

control the power

48

‘K’ cam cleatsca

m c

lea

ts

Specifications ‘K’ cam mini ‘K’ cam midi ‘K’ cam maxi

Max line Ø 10mm 6-12mm 10-14mm

Fastenings Ø 4mm 5mm 5mm

Fastening 30mm 40mm 50mmcentres

Holding power 190kg 230kg 260kg

Weight 17g 34g 50g

‘K’ cam ‘K’ cam ‘K’ cammini midi maxi

‘K’ cam cleat only‘K’ cam cleat only 70 100 70 200 70 300

‘K’ cam cleat with wire front fairlead

‘K’ cam cleat with wire front fairlead 70 101 70 201 70 301

Wire front fairlead onlyWire front fairlead, stainless steel 70 104 70 204 70 304

Pillar fairlead onlyPillar fairlead, grey 70 105 70 205 70 305

Pillar fairlead, green 70 115 70 215 70 315

Pillar fairlead, red 70 125 70 225 70 325

Pillar fairlead, yellow 70 135 70 235 70 335

Top fairlead onlyTop fairlead, grey 70 106 70 206 70 306

Top fairlead, green 70 116 70 216 70 316

Top fairlead, red 70 126 70 226 70 326

Top fairlead, yellow 70 136 70 236 70 336

Wedge mountWedge mount 70 140 70 240 70 340

Cam top capsPack cam top caps, 2 x red, green, yellow 70 141 70 241 70 341

70 300

70 200

70 100

70 30170 304

70 104

70 340

70 204

70 140

70 240

‘K’ cam cleatsManufactured from a composite Kevlar/Zytal material and available in 3 sizes toaccept lines up to 14mm in diameter. This advanced material offers performanceadvantages over carbon fibre and conventional glass-reinforced resins; ‘K’ camsare very strong, lightweight and have excellent wear-resistance. A progressive toothdesign ensures maximum holding power on all types of line, whilst maintainingminimum wear to both cam and line.

‘K’ Cam bases feature a stainless steel wear bar for prolonged life.

Cams utilise stainless steel leaf springs which give a smooth but positive action.They are also stronger and have a longer life than conventional wire springs.

‘K’ cam cleats are supplied as cleat only plus separate accessories in grey, green, redor yellow where appropriate, to allow colour co-ordination for port, starboard etc.

Wire front fairleadsFrom stainless steel.

Pillar fairleadsThese add-ons enable the cam cleat to be engaged from a variety of angles.Cams can be fitted either way around to achieve a lead from in front or behind.Stainless steel pillars add strength and wear resistance.

Top fairleadsIncorporating stainless steel reinforcing for added strength and wear resistance.

Wedge mountsAngled wedge mounts to suit the 3 sizes of ‘K’ cam cleat.

Cam top capsSupplied in packs containing 2 each of red, green and yellow cam top caps.


ma

st supp

ort‘K’ cam cleats Dinghy mast support

PartNo.

Dinghy mast supportDinghy mast support 42 300

70 135

70 215

70 205

70 325

70 206 70 226 70 21670 236

70 241

Dinghy mast supportDesigned to support the aft end of a dinghy mast when towing.Simply fits onto standard transom fittings and is instantly ready foruse. Fully adjustable for different transom heights and features aremovable pintle to accommodate different transom layouts.

The yolk features a soft neoprene pad to protect the mast, shroudsand lines. Generous eyelets in the yolk allow for a securing line to beeasily attached. A trailer board can be fitted to the cross plate with2 x 6mm screws (not supplied).

• Easy to fit• No fastenings required• Fully and easily adjustable• Increases towing safety• Prevents damage to mast and deck.

Neat mouldedtop cap assembly

Cams mouldedfrom Kevlar/Zytalcomposite – ensureshigh strength andwear resistance

Mouldedbase platepreventsharmfulbuild-upof dirtand gritin movingparts

Stainlesssteel barpreventsbaseburn-out

Progressivetoothdesign formaximumholdingpower andease ofentryand release

Self-lubricating,low frictionslotted cambearing

Base mouldedfrom long-fibrereinforcedengineeringpolymer

Stainless steelleaf springsensure alightweight,smooth camaction

Adjustablemax/minheight

Adjustableheight

Removablepintle

Adjustbottomfitting andheight ofyolk to suittransomfittings andtransomheight, thentighten thelocking nut.

Remove bottompintle if transomhas 2 gudgeons.

Attach trailer lightingboard with 2 x 6mmfastenings

42 300


50

Inspection coversin

spec

tion

cove

rs

Part No. Part No. Part No. Aperture Ø Cutting Ø Overall Ø Fastenings Ø WeightWhite Black Clear mm mm mm mm g

Screw inspection covers – round

Screw inspection cover – round 40 040 40 041 40 042 103 114 145 4 84




Push-fit inspection covers – round

Push-fit inspection cover – round 40 220 40 221 – 195 205 240 5 326

Push-fit inspection cover – round + ‘T’ lock 40 240 40 241 – 185 217 268 5 508

Push-fit inspection cover – round + ‘T’ lock 40 250 40 251 – 257 267 317 5 739

Hinged inspection covers – rectangular

Hinged insp cover – rectangular + ‘T’ lock 40 320 – – 178 x 279 208 x 310 260 x 362 5 900

Hinged insp cover – rectangular + ‘T’ lock 40 340 – – 216 x 289 273 x 329 318 x 394 5 1134

40 051

Inspection coversBarton offer a wide range of inspection covers in screw, push-fit,and locking versions. Round and rectangular covers are available.

Screw inspection covers

Manufactured from high-impact polycarbonate, these coversfeature a course, easy-start thread and a built-in ‘O’ ring seal.

Available in four diameters and in white, back and clear window.

Push-fit inspection covers

A range of larger-sized covers with a firm push-fitaction which seals onto a soft rubber ‘O’ ring.The two largest models are fitted with a lock-downsystem which operates by lifting the ‘T’ bar andturning it through 90°. UV and acetone-resistant.

Hinged rectangular inspection covers

Hinged on the top edge, these covers featurethe ‘T’ lock system and a soft rubber seal.Available in white only. UV and acetone-resistant.

40 042

40 04140 050

40 062

40 240

40 320

40 221

40 08040 061

51control the power

inflata

ble rep

air

ClamSeal™

Dame award category winnerWinner of a National MarineManufacturer’s Association ProductInnovation Award

Pull theplates of theClamSeal™together,across thesplit, usingthe lanyard

With the 2plates pulledtogether,simply hand-tighten thenut for aClam-tightseal!

Reinflate andyou’re safeto continueon yourway!

The award-winning, patentedClamSeal™ – repairs inflatablesfast – even when wet

The ClamSeal™ can instantly repair splits and tears up to 90mm (31/2”) in lengthwithout the use of any hand tools, or adhesive.

ClamSeal™ is a patented glue-less repair system that instantly repairs small tears orsplits in inflatables above or below the waterline – regardless of the fact that thematerial may be wet.

The system works by using two half ‘shells’ that screw together tightly, using theinflatable material itself as a water and air-tight seal. It is quick and easy to fit andeffects an immediate repair which can keep you afloat until a more permanentrepair can be made.

• Quick and easy to fit

• Requires no adhesive or tape

• Can be used above or below the waterline

• Can be used on wet materials

• Provides an instant repair

• Re-useable again and again.

PartNo.

ClamSeal™

Barton ClamSeal™ 60 001

ClamSeal™ is suitable for use on:

• RIBs

• Dinghies

• Liferafts

• Buoyancy bags

• Virtually any inflatable product.

Open theClamSeal™and insertthe baseplateinto thesplit.

1

The ClamSeal™ can be carried as part of your emergency equipment on board. Itcan be used at sea, on shore; even underwater as no adhesive or tape is involved.The clever mechanics of the ClamSeal™ design mean this simple product cankeep you safely afloat.

The ClamSeal™ has now become a permanent part of the safety kit on many RIBsaround the world and is continuing to amaze those who have used them – aneffective, low cost solution to an otherwise complicated problem.

2

3 4

Pat pending GB0329522.7

60 001

60 001

control the power

52

Fuel Whistlefu

el w

hist

le

fuel tank

The Barton Fuel WhistleA simple device to prevent accidentalspillages whilst refuelling

This unique patented product has been designed to give anaudible warning to prevent fuel spills during the refuelling ofyour boat. This helps prevent marine pollution and ensuresthat your topsides and deck are kept free from spills.

Tens of thousands of boats are refuelled every day and each timeup to half a gallon of fuel is potentially spilled into our waterways.For the most part this environmental hazard goes unreportedand unchecked.

Disturbed by an oily sheen on the surface of the water,some boat-owners may spray a liquid soap on the slickto break up the mess. This is actually even more harmfulto the environment, as the soap carries the oil to thesediment at the bottom where it builds up year after year.This sediment threatens all sea bed-dwelling life.

Until now, controlling these fuel spills has been difficult.Barton Marine has produced a simple and inexpensive fuelspill prevention device to warn that the fuel tank isapproaching full without spilling a single drop of fuel.

With the ‘Fuel Whistle’, there will be no more guess work, nowaste, no pollution. Every boat-owner can be a partner inprotecting our precious resources.

Installing the Fuel Whistle

• The 16mm (5/8") fuel vent line iscut approx 300mm (12”) fromthe fuel tank

• The ‘Fuel Whistle’ is inserted withthe arrows facing the hull vent.

• The Fuel Whistle is thensecured with 2 x hose clamps(not supplied).

• If required, the device can be heldin place with 2 stainless steelscrews inserted into the mouldedmounting ears.

• The ‘Fuel Whistle’ should beoriented within 45° of the verticalto allow for proper drainage.

Specifications

Overall length 95mm

Installed length 50mm

Width (including lugs) 50mm

How it works...

While the tank is being filled a‘whistling’ sound is producedby the ‘Fuel Whistle’.

The sound is loud enough tobe heard from any point onthe boat. It will be audible ina strong breeze or with anynormal surrounding sounds.

As the tank approaches full,the sound turns to a ‘warble’and when completely full itstops altogether – giving anearly warning to stop fillingBEFORE a fuel spill occurs.

• Eco-friendly

• Simple to fit

• Protects the environment and your deck

• Suitable for sail and power boats

• Fitting instructions included

• Cost-effective.

PartNo.

Barton fuel whistleFuel whistle 60 010

60 010

BullseyesA range of four bullseyes for through-deck or on-deck screw mounting. All featurea strong, moulded plastic eye, reinforced with a stainless steel bar. Two models alsofeature a stainless steel eye insert to limit wear to the line. All accept lines up to16mm Ø.

Pad eyesA wide range of attachment eyes/fairleads manufactured from stainless steel.Featuring a solid stainless steel bar welded for extra security.

Folding pad eye – stainless steel pad eye with anti-vibration rubber pad.Folds flat to deck when not in use.

Double folding pad eye – with anti-vibration rubber pads and two fixingeyes which fold flat when not in use.

Deck eyes (stainless steel)Two stainless steel deck eyes with generous eye capacity.

Fairlead eyesMoulded from glass fibre reinforced nylon with stainless steel reinforcing.Available in 3 sizes and in a choice of grey, green, red or yellow.

Part of our ‘K’ cam range - see pages 48-49 for further details.


sailing

hard

wa

reBullseyes, pad eyes, deck eyes

Part Max line Ø D L1 L2No. Insert? sq ft mm mm mm

BullseyesThrough-deck 60 420 ✔ 16 6 57 18

Through-deck 60 421 ✔ 16 6 77 35

Through-deck 60 422 ✘ 16 6 105 60

Screw-to-deck 60 423 ✘ 16 6 40 –

Part Dia Ø Height Hole centre Width Fastenings ØNo. ‘A’ ‘B’ mm ‘C’ mm ‘D’ mm mm

Pad eyesPad eye – fixed 60 305 4 16 30 40 5

Pad eye – fixed 60 306 6 24 44 60 5

Pad eye – fixed 60 307 8 28 55 80 6

Pad eye – fixed 60 308 10 35 60 95 8

Pad eye – folding 60 309 6 42 36 54 6

Pad eye – dble folding 60 304 6 42 – – 6

Part Height Width Fastenings ØNo. ‘A’ mm ‘B’ mm mm

Deck eyes/fairlead eyesDeck eye – S/S 60 410 14 14 5

Deck eye – S/S 60 411 18 16 6

Deck eye – plastic, grey 70 106 9 15 4

Deck eye – plastic, green 70 116 9 15 4

Deck eye – plastic, red 70 126 9 15 4

Deck eye – plastic, yell 70 136 9 15 4









60 422 60 421

60 423

60 420

60 305

60 30760 306

60 308

60 309 60 304

70 23670 21670 22670 206

60 411

60 410

L1


54

Clevis pins, split pins, springs and sheavessh

eave

s

PartNo.

Split ringsSplit rings – 10mm Ø - pack of 10 60 190

Split rings – 14mm Ø - pack of 10 60 191

Part Dia Ø Width BoreNo. ‘D’ mm ‘W’ mm mm

Sheaves – plain bearingPlain bearing sheave 64 801 30 11 8

Plain bearing sheave 64 802 32 14 8















Sheaves – ball bearingBall bearing sheave 64 901 30 12 4

Ball bearing sheave 64 902 30 14 4













Part Diameter Ø LengthNo. ‘D’ mm ‘L’ mm

Clevis pinsClevis pins – pack of 2 60 203 5 15

Clevis pins – pack of 2 60 204 5 18






Part Diameter Ø HeightNo. ‘D’ mm ‘H’ mm

Stand-up springsSpring – S/S 60 120 20 35

Spring – S/S 60 121 30 30

Spring – plastic 60 122 40 50

Spring – plastic 60 123 48 55

Clevis pinsA comprehensive selection of clevis pins manufactured from 316 stainlesssteel – as used throughout the Barton range of blocks.

Supplied in packs of two.

Stand-up springsIdeal for mounting blocks on decks to prevent tumbling or causing ropesnags and deck damage. Either in stainless steel or soft plastic.

Available in two sizes.

Split ringsEasy-fit stainless steel split rings for use with our clevis pins.

Supplied in two sizes and in packs of 10.

SheavesA comprehensive range of plain and ball bearing sheaves as used throughoutthe complete Barton block range. Moulded from acetal resin, our unique,super-low friction ball race system features delrin balls running on a largediameter centre boss, which ensures an extremely low friction performance.

64 901

64 801

60 210

60 20960 208

60 203

60 207

60 204

60 123

60 120

60 121

60 122

60 191

60 190

55control the power

shackles

Shackles and ‘S’ hooks

Part Pin Ø Length WidthNo. mm ‘L’ mm ‘W’ mm

Screw pin shackles (strip)Strip shackle 60 310 5 27 10

Strip shackle 60 311 6 38 13

Strip shackle 60 312 8 50 16

Screw pin shackles (bar)Bar shackle 60 320 6 38 13

Bar shackle 60 321 6 44 20

Bar shackle 60 322 8 49 16

Bar shackle 60 323 8 55 20

Rigging linksRigging link 60 343 5 30 14

Rigging link 60 344 6 37 18

Rigging link 60 350 6 50 19

SwivelsSwivel 60 700 5 33 8

Swivel 60 701 5 33 9

Swivel 60 702 5 33 11

Swivel 60 703 6 45 14

ShacklesA range of screw pin strip and forged bar shackles instainless steel – as used throughout the Barton range.

Pin diameters up to 8mm available.

Rigging linksPressed stainless steel rigging links with clevis pinand ring in pin.

Sizes up to 6mm pin diameter.

SwivelsStainless steel swivels as used throughout our blocks.

Four sizes available.

‘S’ hooksA handy fitting with a multitude of uses. Manufacturedfrom stainless steel. Supplied as either a plain hook orwith spring latch fitted.

Part Bar Ø Length WidthNo. mm ‘L’ mm ‘W’ mm

‘S’ hooks‘S’ hook plain 60 708 6 73 19

‘S’ hook with latch 60 709 6 73 19

60 312

60 310

60 311

60 32360 322

60 32060 321

60 35060 343

60 344

60 703

60 70260 700 60 701

60 708 60 709


56

Part number indexin

dex 01090 ............5

01091 ............501110 ............501111 ............501120 ............501121 ............501130 ............501131 ............501150 ............501151 ............501160 ............501170 ............501180 ............501190 ............501210 ............501211 ............501220 ............501221 ............501230 ............501231 ............501250 ............501280 ............501320 ............501321 ............501330 ............501331 ............5

02090 ............702091 ............702110 ............702111 ............702120 ............702121 ............702130 ............702131 ............702140 ............702141 ............702150 ............702151 ............702160 ............702161 ............702170 ............702171 ............702180 ............702190 ............702210 ............702211 ............702220 ............702221 ............702230 ............702231 ............702250 ............702280 ............702290 ............702320 ............702321 ............702330 ............702331 ............702410 ............702411 ............702420 ............702421 ............702430 ............702431 ............702440 ............702441 ............702531 ............702541 ............702571 ............702631 ............702641 ............702731 ............702740 ..........19

03090 ............903091 ............903110 ............903111 ............903120 ............903121 ............903130 ............903131 ............903140 ............903141 ............903150 ............903151 ............903160 ............903161 ............903170 ............903171 ............903180 ............903181 ............903190 ............903210 ............903211 ............903220 ............903221 ............903230 ............903231 ............903250 ............903320 ............903321 ............903330 ............903331 ............903410 ............903411 ............903420 ............903421 ............903430 ............903431 ............903440 ............903441 ............903480 ............903481 ............903511 ............903531 ............903541 ............903571 ............903631 ............903641 ............903681 ............903731 ............9

04090 ..........1104091 ..........1104110 ..........1104111 ..........1104120 ..........1104121 ..........1104130 ..........1104131 ..........1104140 ..........1104141 ..........1104150 ..........1104151 ..........1104160 ..........1104170 ..........1104171 ..........1104180 ..........1104181 ..........1104190 ..........1104210 ..........1104211 ..........1104220 ..........1104221 ..........1104230 ..........1104231 ..........1104250 ..........11

04320 ..........1104321 ..........1104330 ..........1104331 ..........1104410 ..........1104411 ..........1104420 ..........1104421 ..........1104430 ..........1104431 ..........1104440 ..........1104441 ..........1104480 ..........1104481 ..........1104531 ..........1104541 ..........1104571 ..........1104630 ..........1104631 ..........1104641 ..........1104681 ..........1104731 ..........1104930 ..........1104931 ..........11

05110 ..........1305111 ..........1305120 ..........1305121 ..........1305130 ..........1305131 ..........1305140 ..........1305141 ..........1305170 ..........1305171 ..........1305180 ..........1305181 ..........1305220 ..........1305221 ..........1305320 ..........1305321 ..........1305330 ..........1305331 ..........1305420 ..........1305421 ..........1305430 ..........1305431 ..........1305440 ..........1305441 ..........1305480 ..........1305481 ..........1305631 ..........1305641 ..........1305681 ..........1305930 ..........1305931 ..........13

06110 ..........1506111 ..........1506120 ..........1506121 ..........1506130 ..........1506131 ..........1506140 ..........1506141 ..........1506170 ..........1506171 ..........1506180 ..........1506181 ..........1506220 ..........1506221 ..........1506320 ..........1506321 ..........1506330 ..........1506331 ..........15

06420 ..........1506421 ..........1506430 ..........1506431 ..........1506440 ..........1506441 ..........1506480 ..........1506481 ..........1506631 ..........1506641 ..........1506681 ..........1506930 ..........1506931 ..........15

07110 ..........1707111 ..........1707120 ..........1707121 ..........1707130 ..........1707131 ..........1707140 ..........1707141 ..........1707170 ..........1707171 ..........1707180 ..........1707181 ..........1707220 ..........1707221 ..........1707320 ..........1707321 ..........1707330 ..........1707331 ..........1707420 ..........1707421 ..........1707430 ..........1707431 ..........1707440 ..........1707441 ..........1707480 ..........1707481 ..........1707631 ..........1707641 ..........1707681 ..........1707930 ..........1707931 ..........17

11090 ............511091 ............511110 ............511111 ............511120 ............511121 ............511130 ............511131 ............511150 ............511151 ............511160 ............511170 ............511180 ............511190 ............511210 ............511211 ............511220 ............511221 ............511230 ............511231 ............511250 ............511280 ............511320 ............511321 ............511330 ............511331 ............5

12090 ............712091 ............7

12110 ............712111 ............712120 ............712121 ............712130 ............712131 ............712140 ............712141 ............712150 ............712151 ............712160 ............712170 ............712171 ............712180 ............712190 ............712210 ............712211 ............712220 ............712221 ............712230 ............712231 ............712250 ............712280 ............712290 ............712320 ............712321 ............712330 ............712331 ............712410 ............712411 ............712420 ............712421 ............712430 ............712431 ............712440 ............712441 ............712531 ............712541 ............712571 ............712631 ............712641 ............712731 ............7

13090 ............913091 ............913110 ............913111 ............913120 ............913121 ............913130 ............913131 ............913140 ............913141 ............913150 ............913151 ............913160 ............913170 ............913171 ............913180 ............913181 ............913190 ............913210 ............913211 ............913220 ............913221 ............913230 ............913231 ............913250 ............913320 ............913321 ............913330 ............913331 ............913410 ............913411 ............913420 ............9

13421 ............913430 ............913431 ............913440 ............913441 ............913480 ............913481 ............913511 ............913531 ............913541 ............913571 ............913631 ............913641 ............913681 ............913731 ............9

14090 ..........1114091 ..........1114110 ..........1114111 ..........1114120 ..........1114121 ..........1114130 ..........1114131 ..........1114140 ..........1114141 ..........1114150 ..........1114151 ..........1114160 ..........1114170 ..........1114171 ..........1114180 ..........1114181 ..........1114190 ..........1114210 ..........1114211 ..........1114220 ..........1114221 ..........1114230 ..........1114231 ..........1114250 ..........1114320 ..........1114321 ..........1114330 ..........1114331 ..........1114410 ..........1114411 ..........1114420 ..........1114421 ..........1114430 ..........1114431 ..........1114440 ..........1114441 ..........1114480 ..........1114481 ..........1114531 ..........1114541 ..........1114571 ..........1114630 ..........1114631 ..........1114641 ..........1114681 ..........1114731 ..........1114930 ..........1114931 ..........11

15110 ..........1315111 ..........1315120 ..........1315121 ..........1315130 ..........1315131 ..........1315140 ..........1315141 ..........1315170 ..........13

15171 ..........1315180 ..........1315181 ..........1315220 ..........1315221 ..........1315320 ..........1315321 ..........1315330 ..........1315331 ..........1315420 ..........1315421 ..........1315430 ..........1315431 ..........1315440 ..........1315441 ..........1315480 ..........1315481 ..........1315631 ..........1315641 ..........1315681 ..........1315930 ..........1315931 ..........13

16110 ..........1516111 ..........1516120 ..........1516121 ..........1516130 ..........1516131 ..........1516140 ..........1516141 ..........1516170 ..........1516171 ..........1516180 ..........1516181 ..........1516220 ..........1516221 ..........1516320 ..........1516321 ..........1516330 ..........1516331 ..........1516420 ..........1516421 ..........1516430 ..........1516431 ..........1516440 ..........1516441 ..........1516480 ..........1516481 ..........1516631 ..........1516641 ..........1516681 ..........1516930 ..........1516931 ..........15

17110 ..........1717111 ..........1717120 ..........1717121 ..........1717130 ..........1717131 ..........1717140 ..........1717141 ..........1717170 ..........1717171 ..........1717180 ..........1717181 ..........1717220 ..........1717221 ..........1717320 ..........1717321 ..........1717330 ..........1717331 ..........1717420 ..........1717421 ..........17

17430 ..........1717431 ..........1717440 ..........1717441 ..........1717480 ..........1717481 ..........1717631 ..........1717641 ..........1717681 ..........1717930 ..........1717931 ..........17

19000 ..........3019010 ..........3019020 ..........3019030 ..........3019040 ..........3019050 ..........3019060 ..........3019100 ..........3019101 ..........3019102 ..........3019103 ..........3019105 ..........3019900 ..........3019901 ..........3019902 ..........30

20000 ..........2920001 ..........2920002 ..........2920003 ..........2920010 ..........2920012 ..........2920013 ..........2920020 ..........2920022 ..........2920023 ..........2920030 ..........2920032 ..........2920033 ..........2920040 ..........2920042 ..........2920043 ..........2920050 ..........2920052 ..........2920053 ..........2920060 ..........2920062 ..........2920063 ..........2920100 ..........2920101 ..........2520103 ..........2520105 ..........2520107 ..........2520110 ..........2520112 ..........2520113 ..........2520114 ..........2520117 ..........2520200 ..........2820201 ..........2820202 ..........2720300 ..........2520310 ..........2820900 ..........2420901 ..........2420902 ..........24

21000 ..........4021001 ..........4021002 ..........4021011 ..........4021022 ..........4021033 ..........40

Part No Page Part No Page Part No Page Part No Page Part No Page Part No Page Part No Page Part No Page


57

Part number indexind

ex21034 ..........4021050 ..........4021055 ..........4021100 ..........4121101 ..........4121200 ..........4121201 ..........4121202 ..........4121210 ..........4121211 ..........4121212 ..........4121323 ..........4021641 ..........4121642 ..........4121643 ..........4121644 ..........41

22000 ..........3322010 ..........3322020 ..........3322030 ..........3322040 ..........3322050 ..........3322060 ..........3322100 ..........3322200 ..........3322210 ..........3322220 ..........3322221 ..........3322300 ..........3322301 ..........3322310 ..........3322311 ..........3322312 ..........3322900 ..........3322901 ..........33

24000 ..........2924001 ..........2924002 ..........2924003 ..........2924010 ..........2924012 ..........2924013 ..........2924020 ..........2924022 ..........2924023 ..........2924030 ..........2924032 ..........2924033 ..........2924040 ..........2924042 ..........2924043 ..........2924050 ..........2924052 ..........2924053 ..........2924060 ..........2924062 ..........2924063 ..........2924100 ..........2924101 ..........2524103 ..........2524105 ..........2524107 ..........2524110 ..........2524112 ..........2524113 ..........2524114 ..........2524117 ..........2524200 ..........2824201 ..........2824202 ..........2724300 ..........2524310 ..........28

24900 ..........2424901 ..........2424902 ..........24

25000 ..........3525010 ..........3525020 ..........3525030 ..........3525040 ..........3525050 ..........3525060 ..........3525100 ..........3525200 ..........3525210 ..........3525220 ..........3525221 ..........3525300 ..........3525301 ..........3525302 ..........3525303 ..........3525304 ..........3525310 ..........3525311 ..........3525900 ..........3525901 ..........35

26000 ..........3126010 ..........3126020 ..........3126030 ..........3126040 ..........3126050 ..........3126060 ..........3126101 ..........3126102 ..........3126103 ..........3126104 ..........3126110 ..........3126111 ..........3126900 ..........3126901 ..........3126902 ..........31

28000 ..........3228010 ..........3228020 ..........3228030 ..........3228040 ..........3228050 ..........3228060 ..........3228101 ..........3228102 ..........3228103 ..........3228104 ..........3228105 ..........3228110 ..........3228111 ..........3228112 ..........3228900 ..........3228901 ..........3228902 ..........32

30000 ..........2930001 ..........2930002 ..........2930003 ..........2930010 ..........2930012 ..........2930013 ..........2930020 ..........2930022 ..........2930023 ..........2930030 ..........2930032 ..........29

30033 ..........2930040 ..........2930042 ..........2930043 ..........2930050 ..........2930052 ..........2930053 ..........2930060 ..........2930062 ..........2930063 ..........2930100 ..........2930101 ..........2530103 ..........2530105 ..........2530107 ..........2530110 ..........2530112 ..........2530113 ..........2530114 ..........2530117 ..........2530200 ..........2830201 ..........2830202 ..........2730300 ..........2530310 ..........28

32000 ..........3732010 ..........3732020 ..........3732030 ..........3732040 ..........3732050 ..........3732060 ..........3732100 ..........3732101 ..........3732200 ..........3732201 ..........3732210 ..........3732211 ..........3732220 ..........3732221 ..........3732300 ..........3732301 ..........3732302 ..........3732304 ..........3732310 ..........3732311 ..........3732312 ..........3732900 ..........3732901 ..........37

40040 ..........5040041 ..........5040042 ..........5040050 ..........5040051 ..........5040052 ..........5040060 ..........5040061 ..........5040062 ..........5040080 ..........5040081 ..........5040082 ..........5040220 ..........5040221 ..........5040240 ..........5040241 ..........5040250 ..........5040251 ..........5040320 ..........5040340 ..........50

41130 ..........4341140 ..........42

41143 ..........4241150 ..........4241151 ..........4241152 ..........4241153 ..........4241483 ..........4341484 ..........4341496 ..........4341497 ..........4341517 ..........4341517 ..........43

42102 ..........4642200 ..........4642201 ..........4642300 ..........4942334 ..........4642335 ..........4642336 ..........4642356 ..........4642357 ..........4642358 ..........4642359 ..........4642400 ..........4642419 ..........4642422 ..........4642435 ..........4642450 ..........4642500 ..........4642519 ..........4642522 ..........4642535 ..........4642550 ..........4642600 ..........4642601 ..........4642700 ..........46

43001 ..........4743002 ..........4743003 ..........4743004 ..........4743011 ..........4743012 ..........4743013 ..........4743014 ..........4743101 ..........4743102 ..........4743103 ..........4743104 ..........4743105 ..........4743106 ..........4743201 ..........4743202 ..........4743203 ..........4743204 ..........4743205 ..........4743206 ..........4743600 ..........4743601 ..........47

44010 ............444020 ............444030 ............444035 ............444040 ............4

51250 ..........4451253 ..........4451254 ..........4451320 ..........4451322 ..........4451323 ..........4452000 ..........4452001 ..........44

52100 ..........4452110 ..........4452111 ..........4452120 ..........4552121 ..........4552140 ..........4552141 ..........4552142 ..........4552143 ..........4552144 ..........4552145 ..........45

60001 ..........51

60010 ..........52

60120 ..........5460121 ..........5460122 ..........5460123 ..........5460142 ..........4360142 ..........4460160 ..........4560161 ..........4560190 ..........5460191 ..........5460203 ..........5460204 ..........5460207 ..........5460208 ..........5460209 ..........5460210 ..........5460212 ..........5460304 ..........5360305 ..........5360306 ..........5360307 ..........5360308 ..........5360309 ..........5360310 ..........5560311 ..........5560312 ..........5560320 ..........5560321 ..........5560322 ..........5560323 ..........5560343 ..........5560344 ..........5560350 ..........5560404 ..........4560405 ..........4560406 ..........4560407 ..........4560410 ..........5360411 ..........5360420 ..........5360421 ..........5360422 ..........5360423 ..........5360700 ..........5560701 ..........5560702 ..........5560703 ..........5560708 ..........5560709 ..........5560750 ..........42

64801 ..........5464802 ..........5464803 ..........5464804 ..........5464805 ..........5464806 ..........5464807 ..........54

64808 ..........5464809 ..........5464810 ..........5464811 ..........5464812 ..........5464813 ..........5464814 ..........5464815 ..........5464816 ..........5464901 ..........5464902 ..........5464903 ..........5464904 ..........5464906 ..........5464907 ..........5464908 ..........5464909 ..........5464910 ..........5464912 ..........5464913 ..........5464914 ..........5464915 ..........5464916 ..........54

70100 ..........4870101 ..........4870104 ..........4870105 ..........4870106 ..........4870115 ..........4870116 ..........4870125 ..........4870126 ..........4870135 ..........4870136 ..........4870140 ..........4870141 ..........4870200 ..........4870201 ..........4870204 ..........4870205 ..........4870206 ..........4870215 ..........4870216 ..........4870225 ..........4870226 ..........4870235 ..........4870236 ..........4870240 ..........4870241 ..........4870300 ..........4870301 ..........4870304 ..........4870305 ..........4870306 ..........4870315 ..........4870316 ..........4870325 ..........4870326 ..........4870335 ..........4870336 ..........4870340 ..........4870341 ..........4870400 ..........4570401 ..........4570500 ..........4570501 ..........4570600 ..........4570601 ..........4570602 ..........45

80500 ..........3880501 ..........3880502 ..........38

81200 ..........2181500 ..........3981501 ..........3981502 ..........3981540 ..........3981541 ..........3981545 ..........3981546 ..........3981547 ..........3981548 ..........3981582 ..........3881583 ..........3881584 ..........3881585 ..........3881586 ..........3881682 ..........3881683 ..........3881684 ..........3881685 ..........3881686 ..........38

82100 ..........2182200 ..........2182300 ..........2182995 ..........2182996 ..........2182997 ..........2182998 ..........2182999 ..........21

90100 ..........2090101 ..........2090200 ..........2090201 ..........2090300 ..........2090301 ..........2090400 ..........2090401 ..........2090402 ..........20

91020 ..........1991040 ..........1991200 ..........1991300 ..........1991301 ..........1991302 ..........1991400 ..........1991500 ..........1991600 ..........1991650 ..........1991700 ..........1991750 ..........19

95100 ..........1895101 ..........1895102 ..........1895103 ..........1895104 ..........1895105 ..........1895120 ..........1895121 ..........1895122 ..........1895123 ..........1895130 ..........1895131 ..........1895132 ..........1895133 ..........1895137 ..........1895138 ..........1895139 ..........1895200 ..........1895201 ..........1895202 ..........1895203 ..........18

95204 ..........1895205 ..........1895220 ..........1895221 ..........1895222 ..........1895223 ..........1895230 ..........1895231 ..........1895232 ..........1895233 ..........1895300 ..........1895301 ..........1895302 ..........1895303 ..........1895304 ..........1895305 ..........1895320 ..........1895321 ..........1895322 ..........1895323 ..........1895330 ..........1895331 ..........1895332 ..........1895333 ..........1895400 ..........1895401 ..........1895402 ..........1895403 ..........1895404 ..........1895405 ..........1895420 ..........1895421 ..........1895422 ..........1895423 ..........1895430 ..........1895431 ..........1895432 ..........1895433 ..........1895437 ..........1895438 ..........1895439 ..........1895500 ..........1895501 ..........1895502 ..........1895503 ..........1895504 ..........1895505 ..........1895520 ..........1895521 ..........1895522 ..........1895523 ..........1895530 ..........1895531 ..........1895532 ..........1895533 ..........1895600 ..........1895601 ..........1895602 ..........1895603 ..........1895604 ..........1895605 ..........1895620 ..........1895621 ..........1895622 ..........1895623 ..........1895630 ..........1895631 ..........1895632 ..........1895633 ..........18

Part No Page Part No Page Part No Page Part No Page Part No Page Part No Page Part No Page Part No Page

Download - The Barton Catalogue - Emotion Yachting · The Barton Catalogue Barton Marine Equipment Limited Marine House · Tyler Way · Whitstable · Kent CT5 2RS UK t+44 (0)1227 792979 f +44

Top Related