Download - Nox-Crete Product Information Guide

PRODUCT GUIDEDivision 3

Form SealersForm Release AgentsMaintenance & Protection For Forms & EquipmentEvaporation Reducers/Surface Set RetarderCures, Sealers & HardenersTilt-Up Cure & BondbreakersConcrete CleanersConcrete Adhesives/Patching Materials

Division 7Dampproofing Sealers/Water Repellents

Division 9Decorative Floor/Wall Stains & SealersJoint FillersResinous Flooring/OverlaymentsFloor Coatings - Low, Medium & High BuildFloor Coating Stripper

Application Equipment

Form Sealers

Clear Pre-Form Transparent, Penetrating, Solvent Based Polyurethane Wood SealerExtends the life of plywood forms by reducing the absorption of alkaline bleed water. Improves concrete surface appearance by preventing soluble wood sugar migration which can cause concrete surface retardation. Ideal for use with dimensional lumber, plywood, wafer- wood, OSB, fiberboard and particle board concrete forms and rustication strips.

Treated

Untreated

Edge-Flex 645 Tough, Flexible, Water Based Wood Edge SealerExtends concrete forming panel life and reduces edge swell by reducing the absorption of alkaline bleed water through panel edges. Ideal for use with all types of plywood, wafer-wood and OSB concrete forming panels.

Pre-Form HB Pigmented, High Build, Solvent-Free Polyurethane Coating SystemCreates uniformly smooth, planar concrete surfaces by covering the imperfections, rough surfaces and screw holes of concrete forming surfaces. Prevents wood grain pattern telegraphing of plywood forms onto formed concrete surfaces. Ideal for use in gang-forming applications, on precast plywood tables or to resurface damaged wood and steel forms.

This symbol indicates products which are part of our Tilt-Up Partner Products system. These products are designed to work together for optimal performance on tilt-up projects.

• compatibility •

Tilt-Up Partner Products

• chemical•

Additional product information and full Product Data Sheets for all Nox-Crete products are available online atwww.nox-crete.com.

Division 3

This symbol indicates products which offer a version for building green, respecting the environment and protecting people.

� PRECAUTIONS �

DURO-NOX deeply penetrates the pores of concrete surfaces where it can chemically react with the available lime to densify and harden the surface from within.

u Use to seal, harden and dustproof new concrete or existingconcretefloors.

u Ideal for use in warehouses, distribution centers, large retailcenters,officecomplexes,foodprocessing plants, dairies, breweries, slaughtering plants, food lockers, animal pens, bottling plants, chemical plants, etc.

u Use to dustproof vertical concrete surfaces in situations where dust formation would pose an appearance problem or a contamination problem with building contents, equipment and/or occupants, such as concrete tanks for potable water and other liquid or bulk contents, basements and garages.

u Increases abrasion resistance up to 39% and increases surface hardness up to 12%.

u Hardens and increases the abrasion, impact and wearresistanceofconcretefloorswherehigh volumesofpedestrianand/orvehiculartrafficare expected.

u Provides permanent protection to the depth of penetration.

u Reduces the porosity of concrete surfaces, providing chemical resistance to most organic acids, alkalis, salts, foods, fats, oils, greases and solvents and sufficientresistancetoinorganicacidstopermit successful cleanup of spillage.

u Densifies,strengthens,sealsanddustproofssoftor dustyconcretefloors.

u Improves the adhesion of subsequently applied line stripes, paints and coatings to soft or weak concrete surfaces.

u Overall performance and life far surpasses that of conventional membrane forming acrylic cure and seal type products.u Green Engineered™ – better for health and the environment.

u Allowsthefloortobreath,preventinghydrostatic pressure related adhesion failure.

u May be used in conjunction with all NOX-CRETE SILCOSEAL bondbreakers for tilt-up construction.

u Meets all federal and state VOC requirements and is USDA approved.

u Donotuseonlatexorepoxypolymermodified concrete.

u Do not use on concrete previously treated with wax or resin cures, sealers and bondbreaker compounds without their prior removal by chemical or mechanical means as their presence interferes with the penetrating properties of DURO-NOX.

u Apply at substrate temperatures above 40° F (4° C) and below 120° F (49° C).

u Avoid contact with glass, aluminum and steel. If exposureoccurs,immediatelyflushwithwater.Failure to do so may result in permanent surface discoloration.

u Before using on colored concrete, contact NOX- CRETEforspecificproceduresrequired.Incorrect application procedures could result in unacceptable discoloration of the concrete surface.

u If considering the use of DURO-NOX to cure freshly placed concrete, contact NOX-CRETE prior to use for specificlimitationsanduseinstructions.

u Some form of surface preparation is generally requiredpriortotopcoatingDURO-NOXtreatedfloor surfaces with a subsequently applied paint or coating. Forspecificsurfacepreparationprocedure recommendations see ICRI guideline No. 03732.

u Request current product literature, labels and material safety data sheets from manufacturer and read thoroughly before product use.

u Site environmental conditions, substrate conditions and concrete mix design have a major effect on product selection, application methods, procedures and rates, appearance and performance. Product literature provides general information applicable to

APPLICATIONS

USE INSTRUCTIONS

HOW IT WORKS

ADVANTAGES

DURO-NOXMaximum performance, chemically reactive, water based,

silicate type sealer, hardener and dustproofer.

DU

RO

-NO

X

3

cures, sealers & hardeners


Tilt-Up Partner Products • chemical•

n o x - c r e t etm

chemical solutions to concrete problems

P R O D U C T • D A T A

1

Form Release Agents

Bio-Nox Maximum Performance, Biodegradable Form Release Agent 100% biodegradable, water based formulation. Produces architectural concrete surfaces free of staining and with substantially fewer surface defects. Ideal for forming substrates sensitive to solvents and petroleum.

Chembeton Economical, General Purpose Form Release Agent Combines both chemically active and physical barrier type release properties in a petroleum based formulation. Fast-drying. Resists removal by normal rain showers.

Alumi-Nox Maximum Performance Form Release Agent For Aluminum FormsAvailable in both petroleum and water based versions. Produces improved concrete surfaces free of staining and with reduced spalling, bugholes and surface voids. Minimizes concrete buildup on form surfaces and panel edges. Performs well with concrete mix designs utilizing chemical and mineral admixtures such as fly ash and blast furnace slag.

Alumi-Con Economical, Super Concentrated Form Release Agent For Aluminum FormsEconomical alternative to petroleum based specialty form release agents. Dilutes easily with water using Nox-Crete’s Mix Station. Variable dilution rate allows user to maximize product performance and economy. Improved emulsion technology keeps product well mixed to minimize separation.

Form Clean Dual Purpose Form Cleaner And Form Release Agent Available in both petroleum and water based formulations. Removes hardened concrete buildup through repeated use while forms are in service while also acting as a release agent. Cost effective alternative to abrasive blasting, acid washing and scraping and will not damage forms. Extremely effective on aluminum and steel forms.

Nox-Crete Form Coating Maximum Performance Form Release Agent The world’s first chemically active form release agent. Available in petroleum, water based and biodegradable water based versions. Unparalleled performance. Extends form life on non-overlaid plywood, dimensional lumber and MDO plywood concrete forms. Improves concrete surface appearance with no staining and reduced surface voids (bugholes).

Division 3

Nox-Crete PCE Maximum Performance Architectural Form Release Agent100% biodegradable, water based formulation. Produces architectural concrete surfaces free of staining and with substantially fewer surface defects. Dries to form a non-slippery film which resists removal by rain, foot traffic and scouring during concrete placement. Ideal for use with low slump, high density or superplasticized concrete mix designs.

Pro-Release Economical, General Purpose Form Release Agent Low odor, chemically reactive, ready-to-use water based product incorporates improved emulsion technology to keep product well mixed. Specifically formulated for today’s concrete mix designs incorporating fly ash. Contains no diesel fuel or kerosene.

Pallet-Nox Precast Pipe, Block And Paver Form Release Agent100% biodegradable, water based formulation for precast pipe head rings and block and paver pallets. Combines chemical and barrier type release properties for easy removal of pallet and header rings. Produces improved concrete surfaces with no staining and fewer surface voids (bugholes). Ideal for dip tank applications.

Precast Release #80 Maximum Performance Precast Form Release AgentAvailable in both petroleum and water based formulations. Combines chemical and barrier type release properties. Produces architectural concrete surfaces free of staining and with substantially fewer surface defects. Ideal for steam-cured precast concrete and precast mix designs using high amounts of cement, fly ash, silica fume or high-range water reducers.

Release Agent #10 Maximum Performance Architectural Form Release AgentAvailable in both petroleum and water based formulations. Produces architectural concrete surfaces free of staining and with substantially fewer surface defects. Ideal for forms which see daily use or aggressive stripping schedules.

Utility Release Concentrate Economical, Super Concentrated Form Release AgentDilutes easily with water using Nox-Crete’s Mix Station. Variable dilution rate allows user to maximize product performance and economy. Improved emulsion technology keeps the product well mixed to minimize separation.

2

Maintenance & Protection For Forms & Equipment

Deactivator Maintenance Coating And Cleaning CompoundThe world’s first chemically active maintenance coating and cleaning compound. Available in both petroleum and water based formulations. Softens hardened concrete buildup for easy removal and helps prevent accumulation of new buildup on treated steel surfaces. Will not damage paint or rubber hoses. Ideal for use on laser screeds, paving machines, concrete pumps, concrete mixers and other concrete placing equipment.

Form Clean Dual Purpose Form Cleaner And Form Release Agent Available in both petroleum and water based formulations. Cleans forms while they are in service without the application of an additional product to act as a release agent. Through repeated use, concrete buildup is softened and removed. Cost effective alternative to abrasive blasting, acid washing and scraping and will not damage forms.

Formgard TJ Specialized Rust Inhibitor For Steel FormsProtects steel forms in storage from rusting for up to six months. Can also be used as a release agent in precast yard applications.

Seasonox Seasoning Compound For Aluminum Forms Minimizes the natural reactivity between aluminum and fresh concrete by creating a protective barrier that reduces buildup and sticking. Can be used on new aluminum concrete forms or used forms which have been acid cleaned, abrasive blasted or high-pressure power washed.

Evaporation Reducers/Surface Set Retarder

Crete-Nox TA Concrete Surface Set Retarder For Exposing Horizontal AggregateProduces decorative exposed aggregate surfaces without the critical time requirement of the “wet wash” method. More economical than mechanical texturing and produces a true aggregate finish without the dulling of other methods.

Monofilm Concentrated Surface Water Evaporation ReducerExtends the time available for concrete finishing during hot/dry/windy conditions. Reduces surface moisture evaporation on freshly placed concrete up to 80% in wind and 40% in sunlight. Reduces surface crusting, shrinkage cracking and the development of moisture envelopes that lead to spalling. Also available in a ready-to-use formulation.

Division 3

Blast-Off Fast Acting, Non-Corrosive, Biodegradable Concrete Remover Fast acting; contains no mineral-based acids. Quickly removes cement and concrete buildup on concrete mixers, pumps, paving machines, screeds, saws, tools and more. Non-corrosive to equipment, safe for workers and environmentally 100% biodegradable.

3

Cure & Seal 1315 A High Solids Acrylic Copolymer Curing, Sealing And Dustproofing Compound Solvent based formulation provides high gloss and meets the moisture retention requirements of ASTM C 1315, Type 1, Class A & B; ASTM C 309, Type 1, Class A & B; and, AASHTO M 148, Type 1, Class B.

Cures, Sealers & HardenersBro-Cure Silicate Based Concrete Curing, Hardening And Sealing Compound Use on surfaces which will receive subsequent coatings or coverings when water curing, burlap or polyethylene are not viable alternatives. Treated surfaces will have increased compressive strength and resistance to staining. Reduces concrete surface crazing and cracking. Contains a red fugitive dye for easy application.

Division 3

Cure & Seal 100, 150 & 250 E Acrylic Copolymer Resin Type Curing And Sealing Compounds Water based formulations provide an economical, medium- gloss finish. Non-yellowing. All comply with ASTM C 309, Type 1, Class A & B and AASHTO M 148, Type 1, Class B. Cure & Seal 250 E also complies with ASTM C 1315, Type 1, Class A & B. Solids content by version is 10%, 15% and 25% respectively.

Cure & Seal 1200 E 100% Methyl Methacrylate Acrylic Curing And Sealing Compound Water based formulation provides superior film integrity with a high-gloss finish. Non-yellowing. Complies with ASTM C 309, Type 1, Class A & B and, AASHTO M 148, Type 1, Class B.



• chemical•

Duro-Nox Silicate Type Liquid Floor Hardener, Sealer And Densifier High performance formulation hardens, seals, densifies and dustproofs new and existing concrete floors. Increases abrasion, impact and wear resistance. Develops a lustrous sheen through regular use. 20-year performance warranty available.

Duro-Nox LS Lithium Based, Silicate Type Liquid Floor Hardener, Sealer And Densifier High performance formulation hardens, seals, densifies and dustproofs new and existing concrete floors. Increases abrasion, impact and wear resistance. Does not require the costly and environmentally-damaging rinse removal step necessary with application of traditional silicate type liquid floor hardeners. Develops a lustrous sheen through regular use. 20-year performance warranty available.



• chemical•

Duro-Floor Classic System Transparent Liquid Floor Hardener And Polish System For Concrete Floors Designed primarily for industrial and commercial warehouse floors. System combines the application of a liquid floor hardener and an ultra-high gloss polish to achieve a tough, durable, high-gloss floor finish.

Duro-Nox LSC Standard Performance, Lithium Based, Silicate Type Liquid Floor Hardener, Sealer And Densifier Economically hardens, seals, densifies and dustproofs new and existing concrete floors. Increases abrasion, impact and wear resistance. Does not require the costly and environmentally-damaging rinse removal step necessary with application of traditional silicate type liquid floor hardeners. Particularly well-suited for use on colored, dyed or stained concrete without causing white surface discoloration.



• chemical•

4

Ecoseal Economical, General Purpose, UV-Light Resistant Acrylic SealerEconomical, solvent-based, transparent, UV light resistant acrylic sealer produces an abrasion resistant film that protects concrete. Enhances surface colors with a high-gloss, “wet look” sheen. Primarily designed for exterior applications. Available in two lower VOC formulations using VOC exempt solvents. Complies with ASTM C 309, Type 1, Class A & B and AASHTO M 148, Type 1, Class B.

Tilt-Up Cure & Bondbreakers

Sparkl-Seal E Medium Gloss, Acrylic Sealer For Decorative ConcreteTransparent, penetrating, water based, non-yellowing, U.V. light resistant acrylic sealer for decorative concrete. Produces a tough, abrasion-resistant film that protects surfaces from absorption and damage from water, dirt, deicing salts, oil and grease. Enhances surface colors and appearance with a medium-gloss sheen. Can be used in interior or exterior applications. Complies with ASTM C 309, Type 1, Class A & B and AASHTO M 148, Type 1, Class B.

Sparkl-Seal VOC High Gloss, Acrylic Sealer For Decorative Concrete Transparent, penetrating, solvent based, non-yellowing, UV light resistant acrylic sealer for decorative concrete. Produces an abrasion-resistant film that protects surfaces from absorption and damage from water, dirt, food, deicing salts, oil and grease. Enhances surface colors and appearance with a high-gloss, “wet look” sheen. Primarily designed for exterior applications. Complies with ASTM C 309, Type 1, Class A & B and AASHTO M 148, Type 1, Class B.

Division 3

Duro-Polish Concentrated, Synthetic Polymer Floor Polish Water based formulation gives an immediate high-gloss finish that requires no buffing. The finish is scuff and scratch resistant and adds slip-resistance. Use on liquid silicate or siliconate hardened concrete floors, acid stained concrete, concrete sealed with acrylic, epoxy and polyurethane and on stone, tile and terrazzo. Meets the static coefficient of friction requirements of ASTM D 2047.



• chemical•

Duro-Polish Plus Concentrated, Synthetic Polymer Floor Polish With Stain Blocker The same benefits of Duro-Polish with the added advantage of stain resistance. Provides stain protection from the most common stain-causing agents found in grocery stores, restaurants, warehouses and distribution centers. Use on concrete floors previously treated with liquid silicate or siliconate hardeners.



• chemical•

Resin Cure E Synthetic Resin Polymer Curing Compound Economical, water based formulation for effective curing of horizontal concrete surfaces. Minimizes concrete surface crazing and cracking. Complies with ASTM C 309, Type 1, Class A & B and AASHTO M 148, Type 1, Class B.

Silcoseal Select Tilt-Up Cure And Bondbreaker Water based, wax-free formulation offers the latest advances in bondbreaker technology, emulsion stability and job site safety. Produces uniformly colored wall panels with exceptional surface appearance. Offers improved resistance to the “osmotic effect.” Meets all current state and federal VOC requirements.



• chemical•

Silcoseal 2000F Tilt-Up Cure And Bondbreaker Water based, wax-free formulation sets the industry standard for performance. Produces uniformly colored wall panels with exceptional surface appearance. Offers improved resistance to the “osmotic effect.”



• chemical•

Silcoseal Classic Tilt-Up Cure And Bondbreaker The world’s first chemically active cure and bondbreaker. Solvent based and wax-free formulation dries quickly and resists rain wash-off. Produces uniformly colored wall panels with exceptional surface appearance. Also available in a low VOC formulation.

5

Concrete CleanersBio-Clean/Bio-Clean Ready Citrus Based Cleaner And Degreaser Fast acting, 100% biodegradable, non-toxic formulation. Removes many organic contaminants, tire marks and oil and grease drippings. Also removes bondbreaker and curing compound residue. Bio-Clean is a concentrated, dilutable formulation and Bio-Clean Ready is ready-to-use.

Bio-Strip Concentrated, Citrus Based Floor Coating Stripping Gel Fast acting, 100% biodegradable, non-toxic formulation removes acrylic curing and sealing compounds, oil and latex paints, varnish, lacquer, enamels and more. Softens most paints and coatings in less than 40 minutes. Gel consistency is ideal for use on horizontal and vertical surfaces.

Concrete Adhesives/Patching Materials

Acryl-Binder Acrylic Copolymer Admixture And Bonding Agent Improves the physical strength and bonding properties of all portland cement based mortars and concrete. Use in horizontal, vertical and overhead applications. Self-curing and non-reemulsifiable.

Acrylic Patch Acrylic Polymer Modified Repair Mortar Fast-setting, portland cement based repair mortar for patching spalls, honeycombs, holes, cracks and surface defects over 1/2 inch in depth. Complies with ASTM C 928 Rapid Hardening Type.

Construction Grout Shrinkage Controlled, Multi-Purpose Construction Grout Portland cement based, high strength, non-corrosive formulation. Use to grout voids and anchor heavy equipment, bolts and dowel bars. Can be used in dry pack, plastic or flowable consistencies and is easily pumped. Complies with CRD-C621, ASTM C 1090 and ASTM C 1107 Grade C, Combination Pre-Hardening and Post-Hardening Volume-Adjusting (Non-Shrink) Grout.

Dauergrout E Epoxy/Polyurethane Copolymer Mortar Extremely tough, high strength, chemical and abrasion resistant formulation. Trowel applied, two component system for patching, grouting, reprofiling and topping concrete floors. Offers exceptional bond to existing cementitious materials. Meets USDA and FDA requirements.

Feather Patch Acrylic Polymer Modified Repair Mortar Portland cement based repair mortar for patching and restoring concrete floors, walls, precast members and tilt wall panels with shallow defects and spalls less than 1/2 inch in depth. Can be smoothly featheredged.

Hydroplug Non-Shrink, Expansive Type Hydraulic Cement Extremely fast-setting formulation for the repair of underwater concrete or concrete subject to hydrostatic pressure. Seals the flow of water in 3-6 minutes and sets up underwater and in temperatures below 320 F (00 C).

Panel Patch Polymer Modified Concrete Resurfacing And Finishing Compound Portland cement based formulation has a smooth, creamy consistency that is grit-free and can be featheredged for smooth transitions. Drys fast - in as little as 15 minutes. Ideal for repair of tilt-up, precast and cast-in-place wall surfaces.

Precision Grout Shrinkage Compensated Precision GroutContains a special blend of shrinkage compensating cements and special mineral aggregates for controlled expansion and maximum strength. Use to grout voids and anchor heavy equipment, bolts and dowel bars. Complies with CRD-C621, ASTM C 1090 and ASTM C 1107 Grade C, Combination Pre-Hardening and Post-Hardening Volume-Adjusting (Non-Shrink) Grout.

Quick Patch Fiber Reinforced Repair MortarFormulated with fast-setting cements that allow repaired surfaces to be returned to service in as little as 2 hours. Up to 3,000 psi strength gain in 3 hours. Use to repair spalls over 1/4 inch in depth on driving surfaces, bridge decks and industrial floors. Can also be used in cold weather or refrigerated environments. Complies with ASTM C 928.

Rapid Rock Expansive Type, Calcium Aluminate Cement Based Anchoring/Repair MortarDevelops high early strength - sets in 20 minutes. Use to anchor bolts, dowels, pipe, rod, posts and other fixtures into concrete. Gypsum-free.

Vertical Patch Vertical And Overhead Repair MortarPortland cement based formulation. Thixotropic viscosity allows overhead and vertical repairs without the need for forming. Use to repair spalls, honeycombs, cavities and voids more than 1/2 inch in depth.



• chemical•

Division 3

Vinyl-Hesive Polyvinyl Acetate Bonding Agent And AdmixtureReemulsifiable and rewettable for longer working time. Improves the physical and bond strength properties of cement based repair products and stucco. Minimizes shrinkage and increases the service life of repair mortars. Water based formulation. 6

Decorative Floor/WallStains & Sealers

Acryl Pen Acrylic And Silane Sealer And Stain For Exterior Horizontal Concrete Penetrates and bonds permanently with exterior broom-finished or textured concrete to provide long-lasting color and protection that will not fade, chalk or flake. Contains a patented silane for outstanding water repellency. Surfaces are protected from abrasion, delamination, freeze/thaw damage and staining from food and oil. Minimal surface film accumulation allows excellent water vapor transmission. Available in 11 standard colors and custom colors.

Stifel VC Economical Silane Sealer For Vertical Concrete, Concrete Masonry & Brick MasonryWater based formulation incorporates a low molecular weight silane that does not evaporate under site application conditions, allowing for deep penetration (up to 1/2 inch). Treated surfaces are protected from damage from freeze/thaw cycles, deicing salts and the absorption of water. The appearance of treated surfaces is not affected and surfaces breathe naturally.

Stifel SC Maxiumum Performance Silane Sealer For Horizontal Concrete Water based formulation incorporates a low molecular weight silane that does not evaporate under site application conditions, allowing for deep penetration (up to 1/2 inch). Treated surfaces are protected from damage from freeze/thaw cycles, deicing salts and the absorption of water. The appearance of treated surfaces is not affected and surfaces breathe naturally.

Dampproofing Sealers/Water Repellents

Stifel GC Silane Sealer For Horizontal & Vertical Concrete, Concrete Masonry & Brick Masonry Water based formulation incorporates a low molecular weight silane that does not evaporate under site application conditions, allowing for deep penetration (up to 1/2 inch). Treated surfaces are protected from damage from freeze/thaw cycles, deicing salts and the absorption of water. The appearance of treated surfaces is not affected and surfaces breathe naturally.

Division 7 Division 9

7

Dynaflex 502 Epoxy/Polyurethane Concrete Floor Joint Filler For Heavy Duty Service100% solids, moisture insensitive, semi-rigid formulation. Develops strength quickly by curing from the inside out.Protects industrial floor saw cut crack control joint edge shoulders from edge fractures. Flexibilized for minimal movement without debonding. Use in heavy duty service applications requiring a minimum Shore Hardness of 80A.

Joint Fillers • compatibility

•


• chemical•

Dynaflex JF-85 Polyurea Concrete Floor Joint Filler For Heavy Duty Service100% solids, self-leveling formulation is fast-setting and tack-free in less than 5 minutes. Protects industrial floor saw cut crack control joint edge shoulders from edge fractures. Combines high Shore Hardness (85A) with good elongation (500%). For use in heavy duty service applications.



• chemical•

Nox-Carb Acrylic And Silane Sealer And Stain For Exterior Vertical Concrete Penetrating, breathable, water repellent sealer/stain offers maximum protection for exterior vertical concrete surfaces.Formulated with 100% methyl methacrylate acrylic resin and a patented silane for enduring color and outstanding water repellency. Will not fade, flake or peel. Available in 10 standard colors and custom colors. 10-year warranty available.



• chemical•

Division 9

Versacryl Acrylic And Silane Stain For Interior And Exterior, Vertical And Horizontal Concrete Methyl methacrylate acrylic resin and water repellent silane formulation penetrates deep into concrete’s micro-pores. Improves the appearance of concrete with durable color that will not fade, chalk or peel. Protects concrete from water absorption and stain discoloration while allowing water vapor transmission. Available in 11 standard colors and custom colors.

Clean Shave Stain Blocking Film For Joint Filler Application Water based, low odor, low VOC, copolymer stain blocking film. Protects concrete from stains caused by joint filler overfill during joint filler application. Also facilitates the joint shaving process, helping to minimize chatter. Removes easily with water once joint filler application has been completed.

Unprotected Protected With Clean Shave

8

Floor CoatingsLow, Medium & High Build

Dauerseal 30E Low Build, Transparent, Epoxy Resin SealerWater based, self-priming formulation. Creates a smooth, glossy coating that improves attractiveness of substrates and improves the light reflectivity of interior environments. Coating is tough and durable with abrasion and chemical resistance.

Dauerseal 60E Low Build, Pigmented, Epoxy Resin Coating And SealerWater based, self-priming formulation. Creates a smooth, glossy coating that adds color to substrates and improves the light reflectivity of interior environments. Coating is tough and durable with abrasion and chemical resistance.

Resinous Flooring/OverlaymentsDauercast DQ Transparent, Epoxy Resinous Flooring System With Multi-Colored, Ceramic-Coated Decorative Quartz AggregateProduces a seamless, high-impact flooring system with an integral cove base. Includes the broadcast application of a ceramic-coated decorative quartz aggregate with a transparent, epoxy resin binder and top coat. Provides excellent chemical, abrasion and slip resistance with a customized decorative appearance.

Dauercast SQ Pigmented, Epoxy Resinous Flooring System With Standard Quartz AggregateProduces a seamless, high-impact flooring system with an integral cove base. Includes the broadcast application of a quartz aggregate with a pigmented, epoxy resin binder and top coat. Provides excellent chemical, abrasion and slip resistance with a customized pigmented, decorative appearance.

Dauergrout E Epoxy/Polyurethane Copolymer Flooring System Extremely tough, high strength, chemical and abrasion resistant formulation. Trowel applied, two component system for patching, grouting, reprofiling and topping concrete floors. Offers exceptional bond to existing cementitious materials. Meets USDA and FDA requirements.

TP-Joint Temporary Joint Filler For Concrete SlabsPatented. Flexible and pre-molded for quick, economical installation. Installed using the TP-Joint Roller, over 1,000 feet can be easily installed in 1 hour. Masks casting/floor slab saw cut crack control joints for production of tilt wall panels without a concrete fin, reducing costly panel surface grinding. Helps minimize joint contamination and joint edge shoulder damage during construction.

Division 9



• chemical•

Staldec SLF Pigmented, Polyurethane, High Build, Self-Leveling Floor Coating Reactive, rapid curing, self-leveling, non-shrinking, solvent-free, two component floor coating for interior applications. Provides a smooth, seamless, highly abrasion resistant surface which is easily cleaned.

Dauerseal S Medium Build, Epoxy Resin Coating And Sealer Pigmented or transparent, 100% solids, light stable, non-gassing, rapid curing. Creates a smooth, glossy coating which improves the attractiveness of substrates and the light reflectivity of interior environments. Coating is tough and durable with abrasion and chemical resistance.

9

Application Equipment

Parts and service for all Nox-Crete hand pump sprayers, power sprayers and mix stations

are available directly from Nox-Crete.

Ideal Form And Concrete Sprayer Economical Handpump Sprayer Equipped with a polypropylene tank and trigger valve, brass wand and chemical resistant hose, seals and gaskets. Includes discharge filter in the tank and an eight foot coiled hose. Uniformly applies concrete form release agents, tilt-up bondbreakers, curing compounds, floor sealers and other construction chemicals.

Perfect Form And Concrete Sprayer Contractor Grade Handpump Sprayer Equipped with a heavy-duty stainless steel tank, brass wand and trigger valve, a high-capacity, 100-mesh filter in the trigger valve, air pressure gauge, spare parts container and chemical resistant hose, seals and gaskets. Options include compressed air valve, pressure regulator on wand, wheeled cart and more. Uniformly applies concrete form release agents, tilt-up bondbreakers, curing compounds, floor sealers and other construction chemicals.

Perfect Power Sprayer Drum Mounted Power Sprayer Equipped with electric powered heavy-duty motor on a powder-coated steel base which rests securely on top of a 55-gallon drum or 275-gallon tote. Equipped with chemical resistant pickup and mixing tubes and 25 feet of hose and brass wand and fittings. Quickly and uniformly applies concrete form release agents, tilt-up bondbreakers, curing compounds, floor sealers and low viscosity water repellent sealers.

Mix Station Combination Mix And Dilute Station For Super Concentrated Form Release Agents Specifically designed to simultaneously mix and dilute Nox-Crete super concentrated form release agents. Provides consistent, reliable dilution ratios and eliminates labor-related mixing and diluting errors.

Perfect Power Sprayer

Mix StationPerfect Form And Concrete Sprayer

Ideal Form And Concrete Sprayer

Floor Coating Stripper

NOx-CRETE PRODUCTS GROUPOmaha, NE • USA • www.nox-crete.com • (800) 669-2738

Division 9

Bio-Strip Concentrated, Citrus Based Floor Coating Stripping Gel Fast acting, 100% biodegradable, non-toxic formulation removes acrylic curing and sealing compounds, oil and latex paints, varnish, lacquer, enamels and more. Softens most paints and coatings in less than 40 minutes. Gel consistency is ideal for use on horizontal and vertical surfaces.

Pump Foamer

Pump Foamer Handpump FoamerHeavy-duty polypropylene tank and gun specifically designed to produce a rich foam that clings to veritcal surfaces. Maximizes performance of Blast-Off Concrete Buildup and Splatter Remover and other maintenance products. 10

REV 12/2011

Download - Nox-Crete Product Information Guide

Top Related