© 2011 Anite Finland Ltd

Quick Guide for Nemo Handy

1. Switch on the Bluetooth (BT) GPS receiver (if used). Activate BT on your Nemo Handy mobile. See Nemo Handy manual for instructions for first-time use of a GPS receiver.

2. Select the Nemo Handy icon from the Menu view. Nemo Handy detects the available BT devices. If you have used the GPS receiver before with Nemo Handy, the connection will be established automatically.

3. If you want to use scripts, load a script by selecting Options | Script | Load. Run a script by selecting Options | Script | Run.

4. To start recording manually, select Options | Start Logging or activate auto logging to start recording automatically when a script is started.

5. With the right and left arrow buttons, browse through the different views. With the up and down arrow buttons, you can scroll up and down the views. Press the navigator button to select different parameters visible in the view.

6. While Nemo Handy is logging, you can use the mobile normally for making calls, sending SMS messages, etc. Use the button to switch between different applications or press the green button to make a call.

7. Stop the recording by selecting Options | Stop Logging. Select Keep to save the file with the default name, Rename to save the file with a new name, Delete to the delete the file, Send via FTP to send the measurement file to an FTP server, or Send via e-mail to send the measurement file to an email address.

8. Export the measurement file for post-processing and analysis, or play it back with Nemo Handy.

© 2011 Anite Finland Ltd

Quick Guide for Nemo Handy

1. Switch on the Bluetooth (BT) GPS receiver (if used). Activate BT on your Nemo Handy mobile. See Nemo Handy manual for instructions for first-time use of a GPS receiver.

2. Select the Nemo Handy icon from the Menu view. Nemo Handy detects the available BT devices. If you have used the GPS receiver before with Nemo Handy, the connection will be established automatically.

3. If you want to use scripts, load a script by selecting Options | Script | Load. Run a script by selecting Options | Script | Run.

4. To start recording manually, select Options | Start Logging or activate auto logging to start recording automatically when a script is started.

5. With the right and left arrow buttons, browse through the different views. With the up and down arrow buttons, you can scroll up and down the views. Press the navigator button to select different parameters visible in the view.

6. While Nemo Handy is logging, you can use the mobile normally for making calls, sending SMS messages, etc. Use the button to switch between different applications or press the green button to make a call.

7. Stop the recording by selecting Options | Stop Logging. Select Keep to save the file with the default name, Rename to save the file with a new name, Delete to the delete the file, or Send via FTP to send the measurement file to an FTP server, or Send via e-mail to send the measurement file to an email address.

8. Export the measurement file for post-processing and analysis, or play it back with Nemo Handy.

IMPORTANT!

READ THIS BEFORE TAKING NEMO HANDY INTO USE!

Do not upgrade your Nemo Handy measurement terminal firmware with Nokia PC Suite.

Upgrading will cause the terminal to permanently lose its measurement capability.

File locations:

Script files (.nsf): mobile memory (C:\Nokia\Nemo\Script) or memory card: (E:\Nemo\Script)

Configurations (.xml): mobile memory (C:\Nokia\Nemo\Config) or memory card (E:\Nemo\Config)

Measurement data (.nbl): memory card (E:\Nemo\Results)

Before you start logging with Nemo Handy, please check that the mobile is in idle mode, i.e. that

there are no data connections or calls ongoing. If there is a call on when you start logging, it may

affect the measurement results.

Use the mobile memory to store the test files downloaded from the FTP server and the memory

card for storing the Nemo Handy log file. This is to prevent log file writing problems in cases

where fi les are downloaded and the log file is written simultaneously on the memory card.

When exporting measurement files from the memory card to a PC, do not insert the memory card

directly into the USB converter. Use the card adapter provided in the package.

IMPORTANT!

READ THIS BEFORE TAKING NEMO HANDY INTO USE!

Do not upgrade your Nemo Handy measurement terminal firmware with Nokia PC Suite.

Upgrading will cause the terminal to permanently lose its measurement capability.

File locations:

Script files (.nsf): mobile memory (C:\Nokia\Nemo\Script) or memory card: (E:\Nemo\Script)

Configurations (.xml): mobile memory (C:\Nokia\Nemo\Config) or memory card (E:\Nemo\Config)

Measurement data (.nbl): memory card (E:\Nemo\Results)

Before you start logging with Nemo Handy, please check that the mobile is in idle mode, i.e. that

there are no data connections or calls ongoing. If there is a call on when you start logging, it may

affect the measurement results.

Use the mobile memory to store the test files downloaded from the FTP server and the memory

card for storing the Nemo Handy log file. This is to prevent log file writing problems in cases

where fi les are downloaded and the log file is written simultaneously on the memory card.

When exporting measurement files from the memory card to a PC, do not insert the memory card

directly into the USB converter. Use the card adapter provided in the package.