QATAR TECHNICAL PETROLEUM CENTER, P.O. Box 9955, Salwa Road, Doha, Qatar.Tel: +974 4458 1440. Fax: +974 4458 0414 Email: [email protected] URL: www.qtpc.qa
NACE: CIP Level I
DescriptionThe CIP Level I Course is an intensive presentation of the basic technology of coating application and inspection over a full 60 hours of personal instruction and practice. This course provides both the technical and practical fundamentals for coating inspection work on structural steel projects.
Who Should AttendAlthough specifically designed for coating inspectors new to the coatings industry, this course will benefit anyone interested in gaining a better understanding of coatings application and inspection including: project engineers, quality assurance manag-ers, contractors, technical sales representatives, blasters, paint applicators, and maintenance personnel.
PrerequisitesThere are no prerequisites for this course.
Course Highlights (include but are not limited to)• Coatings Introduction• Curing Mechanisms• Role of the Inspector• Environmental Test Instruments• Inspection Procedures• Nondestructive Test Instruments• Coating Specifications• Documentation• Surface Preparation and Standards• Application Procedures• Coating Failures• Field Lab• Pre-job Conference• MSDS and Product Data Sheet Review• Logbook Documentation• Measurement of Ambient Conditions• Nondestructive Testing and Inspection• Team Exercises•Case Studies
QATAR TECHNICAL PETROLEUM CENTERQTPC - AN ISO 9001:2008 Regd.
NACE CIP LEVEL 3 (Peer)QATAR TECHNICAL PETROLEUM CENTER
QATAR TECHNICAL PETROLEUM CENTER, P.O. Box 9955, Salwa Road, Doha, Qatar.Tel: +974 4458 1440. Fax: +974 4458 0414 Email: [email protected] URL: www.qtpc.qa
About the Instructor
EXPERIENCE
ROBERT M. ROYNATIONAL ASSOCIATION OF COATINGS ENGINEERS, Houston, TexasPORTSMOUTH TECHNICAL INSTITUTE, Portsmouth, New Hampshire Study Emphasis– Drafting and Architecture
• UNIVERSAL INSPECTION GROUP, LLC – Sept 2006 – PRESENT -- President• 1994 to PRESENT NACE INTERNATIONAL COATINGS LEAD INSTRUCTOR National Association of Coating Engineers (NACE), 1440 South Creek Drive, Houston, Texas 77084• 1993 to PRESENT – NACE INTERNATIONAL CERTIFIED COATING INSPECTOR (# 2487)• NOVEMBER 1997 TO PRESENT – CEO KMA• JANUARY 1990 TO NOVEMBER 1997 – INDUSTRIAL SALES REPRESENATIVE Carboline Company, 350 Hanley Industrial Court, Saint Louis, Missouri 63144• JANUARY 1983 TO JANUARY 1990 – INDUSTRIAL SALES REPRESENATIVE Tnemec East, Incorporated/Righter Corporation, 100 Unicorn Park Drive, Woburn, Massachusetts.• 1981 to 1983 – INDUSTRIAL SALES COORDINATOR PPG Industries Incorporated, Silas Dean Highway, Rocky Hill, Connecticut• 1973 to 1981 – MANAGER PPG Industries Incorporated, Bank Street, New London, Connecticut• 1971 to 1973 – ASSISTANT MANAGER PPG Industries, Incorporated, Bank Street, New London, Connecticut• October 1967 to October 1971 – TM2/SS (Highest Grade Held) United States Navy – Submarine Service Nuclear
PROFESSIONAL ASSOCIATIONS• NATIONAL ASSOCIATION OF COATINGS ENGINEERS (NACE), Member Since 1992
• CONNECTICUT FIRE MARSHAL’S ASSOCIATION, Member Since 1985
• CONSTRUCTION SPECIFICATION INSTITUTE (CSI), Member since 1975
Past Member of Board of Directors, Hartford Chapter & Housatonic Chapter
• STEEL STRUCTURES PAINTING COUNCIL (SSPC), Member Since 1972
COMMUNITY ACTIVITIES AND AWARDS• PENSION COMMITTEE, City of New London, 1996 to 1998
• PLANNING AND ZONING COMMISSION, City of New London, 1983 to 1998
• MARINE COMMERCE DEVELOPMENT COMMITTEE, City of New London, Member since 1984
• BIG BROTHERS & SISTERS, New London Chapter, Since 1975. Past Member of the Board of Directors,
Awarded – Big Brother Emeritus and Big Brother of New England – 1984.
QTPC - AN ISO 9001:2008 Regd.
