Download - Monogram EA-6A Intruder

decal placement19

Flat Black

Green

Olive Drab

Flat Dk. Gull Gray

Gloss Gull Gray

Flat Tan

Red

Gloss Yellow

Gloss White

Silver

* REPEAT SEVERAL TIMES* A REPETER PLUSIEURS FOIS

* CEMENT TOGETHER* A COLLER

* ALTERNATIVE ASSEMBLY* ENSEMBLAGE ALTERNATIVE

* REMOVE AND THROW AWAY* A RETIRER ET JETER

* DO NOT CEMENT* NE PAS COLLER

* OPTIONAL PARTS* PIECES EN OPTION

* DECAL * DECAL COMANIE

this paint guide is provided to complete this kit as shown on the box.

Ce guide de peintures est fourni pour reproduire le modèle réduit qui apparaît sur la boîte.

Noir mat

Vert

Gris vert

Gris cendré fonce mat

Gris cendré clair brillian

Havane mat

Rouge

Jaune brilliant

Blanc brilliant

Argent

* Study the assembly drawings.* Each plastic part is identified by a number.* In the assembly drawings, some parts will be

marked by a star (★) to indicate chrome plated plastic.

* For better paint and decal adhesion, wash the plastic parts in a mild detergent solution. Rinse and let air dry.

* Check the fit of each piece before cementing in place.

* Use only cement for polystyrene plastic.* Scrape plating and paint from areas

to be cemented.* Allow paint to dry thoroughly before

handling parts.* Any unused parts may be discarded.

decal applIcatIOn InStRUctIOnS

1. Cut desired decal from sheet.2. Dip decal in water for a few seconds.3. Place wet decal on paper towel.4. Wait until decal is movable on paper backing.5. Place decal in position on model, face up and

slide backing away.6. Press out air bubbles with a soft damp cloth.7. Milkiness that may appear is for better decal

adhesion and will dry clear. Wipe away any excess adhesive.

8. Do not touch decal until fully dry.9. Allow the decals 48 hours to dry before

applying clear coat.

nOte: decals are compatible with setting solutions or solvents.

Read tHIS BeFORe YOU BeGIn lIRe ce QUI SUIt aVant de cOmmenceR

* Etudier les schémas de montage.* Chaque pièce en plastique est identifiée par un numéro.* Sur les schémas de montage, certaines pièces sont

marquées d'une étoile (★) pour indiquer qu'elles sont en plastique chromé.

* Pour une meilleure prise de la peinture et des autocollants, laver les pièces en plastique avec une solution détergente peu concentrée. Les rincer et les laisser sécher à l'air.

* Vérifier que chaque pièce s'ajuste bien avant de la coller en place.

* N'utiliser que de la colle pour polystyrène.* Gratter les parties à coller pour enlever le chrome et la peinture.* Laisser la peinture bien sécher avant de manipuler les pièces.* Toute pièce inutilisée peut être jetée.

dIRectIVeS d'applIcatIOn deS aUtOcOllantS

1. Découper l'autocollant désiré de la feuille.2. Tremper l'autocollant dans de l'eau pendant quelques secondes.3. Placer l'autocollant mouillé sur une serviette en papier.4. Attendez que l'autocollant puisse être déplacé sur son

support en papier.5. Mettre l'autocollant en position sur le modèle face sur

le dessus et faire glisser le support pour l'enlever.6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.7. La substance laiteuse qui peut apparaître est destinée à

améliorer l'adhésion de l'autocollant et devient incolore au séchage. Essuyer pour enlever tout excédent d'adhésif.

8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.9. Laisser l'autocollant sécher pendant 48 heures avant

d'appliquer une couche transparente.

RemaRQUe: les autocollants sont compatibles avec les solutions de fixage ou les solvants.

ea-6a WIld WeaSel KIT 5623 85562300200

If you have any questions or comments, call our hotline at: (800) 833-3570or, please write to:

Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007Be sure to include the plan number (85562300200), part number, description, your return address and phone number.

Visit our website: www.revell.com

Revell Inc Elk Grove Village, IL. Copyright © 2009. All rights reserved.

Kit 5623 - 2

Developed as an evolutionary vari-ant of the original Grumman A2F-1H, the sophisticated EA-6A was con-struction in the mid-sixties as a dedi-cated Electronic Intelligence (ELINT) and Electronic Countermeasures (ECM) aircraft. Its primary mission was to "jam" enimy surface-to-air missile radar emissions to protect U.S. Navy and Marine attack aircraft. Your Revell model features exter-nal ornance such as ALQ-76 jam-ming pods, two shrike missiles, ALE-41 chaff dispenser pod plus external fuel tanks, detailed land-ing gear and cockpit with two crew figures. Authentic decal markings for two versions is also included.

cOcKpIt aSSemBlY1 decal placement18

Kit 5623 - Kit 5623 - Page 11

45SEAT TOPFLAT BLACK

FLAT BLACK

SILVER

44RIGHT

SEAT SIDEFLAT BLACK

43LEFT

SEAT SIDEFLAT BLACK

46SEAT FRONT

OLIVE DRAB

YELLOW WITH BLACK STRIPS

41INSTRUMENT PANELDARK GULL GRAY WITH

BLACK PANELS, GRAY KNOBS AND SILVER SWITCHES

39INTERIOR BUCKET

DARK GULL GRAY(FLAT BLACK CONSOLES WITH SILVER SWITCHES)

47CONTROL STICKDARK GULL GRAY

(PAINT FLAT BLACK GRIP)

77PILOT ARM

79ELECTRONIC WARFARE

OFFICERS ARM


OFFICER

76PILOT

PAINT NOTE:FLIGHT SUITS AND GLOVES ARE OLIVE GREEN,

BOOTS AND VISORS ARE BLACK, HELMETS ARE USUALLY WHITE, BUT CAN BE OF ANY COLOR.

DECAL NOTE:SEE STEP 18

FOR INSTRUMENT PANEL DECAL PLACEMENT

FUel tanK aSSemBlY16 FUSelaGe aSSemBlY2

FUSelaGe BOttOm aSSemBlY3

enGIne aSSemBlY4

Kit 5623 - Page 10 Kit 5623 -

pOd / mISSIle aSSemBlY17

RIGHT

RIGHT

RIGHT

LEFT

LEFT

61LEFT

NOSE DOORGLOSS WHITE

(INSIDE SURFACE PAINT EDGE RED)

60 RIGHT



16INTAKE

GLOSS WHITE INSIDE

17INTAKE

GLOSS WHITE INSIDE

18SPLITTER PLATEGLOSS WHITE INSIDE

81FUEL TANK

BOTTOM HALFGLOSS WHITE

81FUEL TANK


52 TANK FIN

GLOSS WHITE

52 TANK FIN

GLOSS WHITE

80FUEL TANKTOP HALF

GLOSS WHITE

80FUEL TANKTOP HALF

GLOSS WHITE

116RIGHT

INBOARD PYLONGLOSS WHITE

96CHAFF POD HALF

GLOSS WHITE

95CHAFF POD HALF

GLOSS WHITE

102SHRIKE MISSILE

HALFGLOSS WHITE

100SHRIKE MISSILE

HALFGLOSS WHITE

51STEADY BRACES

GLOSS WHITE

111PYLON

GLOSS WHITE 90LEFT

PYLONGLOSS WHITE

111RIGHTPYLON

GLOSS WHITE

101RIGHTRAIL

GLOSS WHITE

114LEFTRAIL

GLOSS WHITE

92LEFT



STEELSTEEL

11FUSELAGE BOTTOM

15TAIL

HOOK

1RIGHT

FUSELAGE HALF

2LEFT

FUSELAGE HALF

PAINT NOTE:SHADED AREA

DARK GULL GRAY(BOTH HALVES)

CUT OUT HOLE IF USING STEADY BRACE # 210 IN STEP 12

WInG aSSemBlY5 pOd / tanK / mISSIle aSSemBlY14

Kit 5623 - Kit 5623 - Page 9

ecm pOd aSSemBlY15

20RIGHT

STABILIZER21

LEFT STABILIZER

14ACTUATOR

ECM PODSTEP 15

ECM PODSTEP 15

MISSILESTEP 17

MISSILESTEP 17

FUEL TANKS

STEP 16

PODSTEP 17

14ACTUATOR

22RIGHTSPEED BRAKE

23LEFT

SPEED BRAKE

30LEFT

WING TOP

104LEFT

WING BOTTOM

29RIGHT

WING TOP

105RIGHT

WING BOTTOM

RIGHT LEFT98

RIGHTPOD HALF

GLOSS WHITE

97RIGHT

POD HALFGLOSS WHITE

117RIGHT


94LEFT


98LEFT

POD HALFGLOSS WHITE

97LEFT

POD HALFGLOSS WHITE

99ROTOR

STEEL BLADES WITH WHITE HUB

99ROTOR


FUSelaGe aSSemBlY12

tanK / lIGHt aSSemBlY13

nOSe WHeel aSSemBlY6

maIn WHeel aSSemBlY7

Kit 5623 - Kit 5623 - Page 8

65NOSE WHEEL

FLAT BLACK TIRES WITH

GLOSS WHITE WHEELS

67LEFT

MAIN OLEOGLOSS WHITE

66RIGHT


HYDRAULIC LINES FLAT BLACK


SILVER(OLEO PORTION)


126MAIN WHEELOUTER HALF

FLAT BLACK TIRES WITHGLOSS WHITE WHEELS



125MAIN WHEEL INNER HALF




64SHIMMY DAMPER

GLOSS WHITE

58NOSE STRUTGLOSS WHITE

203REFUELING

LIGHTCLEAR

124PITOT TUBES

STEEL

27BOARDING

LADDERGLOSS RED

(INSIDE ONLY)

210STEADY BRACE

CLEAR

89TANK HALFGLOSS WHITE


123ANTENNA

122ANTENNA

28ANTENNA

COVER

123ANTENNA

121AIR SCOOP

55AIR SCOOP

118RUDDER PLATE

GLOSS RED

SILVER204

LANDING LIGHTCLEAR

SILVER

113BLADE

ANTENNACLEAR

RIGHTLEFT

CLOSED

ANGLE OF PITOT TUBES ANGLE OF RUDDER PLATE

OPEN

208COLLISION LIGHT

CLEAR

63NOSE WHEEL DOOR

GLOSS WHITE(INSIDE SURFACE PAINT EDGE RED)

canOpY aSSemBlY11

RIGHt dOOR aSSemBlY9

maIn WHeel aSSemBlY cOntInUed8 leFt dOOR aSSemBlY10

Kit 5623 - Kit 5623 - Page 7

69LEFT

SUPPORT STRUTGLOSS WHITE

68RIGHT


75RIGHT

RETRACTING MECHANISMGLOSS WHITE

75LEFT


SILVER

SILVER

GLOSS WHITE

GLOSS WHITE

70RIGHT FRONTWHEEL DOOR

GLOSS WHITE WITH RED EDGES

71LEFT FRONT WHEEL DOORGLOSS WHITE WITH RED EDGES

72RIGHT REARMAIN DOOR


73LEFT REARMAIN DOOR


209SIGHTGLASSCLEAR

201CANOPY

CLEAR

200WINDSHIELD

CLEAR

103MIRRORS

SILVER ON AFT SIDE, DARK GRAY ON FORWARD SIDE

FRAMES ON WINDSHIELD AND

CANOPY IS FUSELAGE COLOR

53INSTRUMENT

HOODFLAT BLACK

26CANOPY SHROUDFUSELAGE

COLOR

DARK GULL GRAY

FRONT VIEWWITH

MIRRORSIN PLACE

canOpY aSSemBlY11

RIGHt dOOR aSSemBlY9

maIn WHeel aSSemBlY cOntInUed8 leFt dOOR aSSemBlY10

Kit 5623 - Page 6 Kit 5623 -

69LEFT


68RIGHT


75RIGHT


75LEFT


SILVER

SILVER

GLOSS WHITE

GLOSS WHITE

70RIGHT FRONTWHEEL DOOR


71LEFT FRONT WHEEL DOORGLOSS WHITE WITH RED EDGES

72RIGHT REARMAIN DOOR


73LEFT REARMAIN DOOR


209SIGHTGLASSCLEAR

201CANOPY

CLEAR

200WINDSHIELD

CLEAR

103MIRRORS

SILVER ON AFT SIDE, DARK GRAY ON FORWARD SIDE

FRAMES ON WINDSHIELD AND

CANOPY IS FUSELAGE COLOR

53INSTRUMENT

HOODFLAT BLACK

26CANOPY SHROUDFUSELAGE

COLOR

DARK GULL GRAY

FRONT VIEWWITH

MIRRORSIN PLACE

FUSelaGe aSSemBlY12

tanK / lIGHt aSSemBlY13

nOSe WHeel aSSemBlY6

maIn WHeel aSSemBlY7

Kit 5623 - Page 5Kit 5623 -

65NOSE WHEEL

FLAT BLACK TIRES WITH

GLOSS WHITE WHEELS

67LEFT


66RIGHT














64SHIMMY DAMPER

GLOSS WHITE

58NOSE STRUTGLOSS WHITE

203REFUELING

LIGHTCLEAR

124PITOT TUBES

STEEL

27BOARDING

LADDERGLOSS RED

(INSIDE ONLY)

210STEADY BRACE

CLEAR



123ANTENNA

122ANTENNA

28ANTENNA

COVER

123ANTENNA

121AIR SCOOP

55AIR SCOOP

118RUDDER PLATE

GLOSS RED

SILVER204

LANDING LIGHTCLEAR

SILVER

113BLADE

ANTENNACLEAR

RIGHTLEFT

CLOSED

ANGLE OF PITOT TUBES ANGLE OF RUDDER PLATE

OPEN

208COLLISION LIGHT

CLEAR

63NOSE WHEEL DOOR

GLOSS WHITE(INSIDE SURFACE PAINT EDGE RED)

WInG aSSemBlY5 pOd / tanK / mISSIle aSSemBlY14

Kit 5623 - Page 4 Kit 5623 -

ecm pOd aSSemBlY15

20RIGHT

STABILIZER21

LEFT STABILIZER

14ACTUATOR

ECM PODSTEP 15

ECM PODSTEP 15

MISSILESTEP 17

MISSILESTEP 17

FUEL TANKS

STEP 16

PODSTEP 17

14ACTUATOR

22RIGHTSPEED BRAKE

23LEFT

SPEED BRAKE

30LEFT

WING TOP

104LEFT

WING BOTTOM

29RIGHT

WING TOP

105RIGHT

WING BOTTOM

RIGHT LEFT98

RIGHTPOD HALF

GLOSS WHITE

97RIGHT

POD HALFGLOSS WHITE

117RIGHT


94LEFT


98LEFT

POD HALFGLOSS WHITE

97LEFT

POD HALFGLOSS WHITE

99ROTOR


99ROTOR


FUel tanK aSSemBlY16 FUSelaGe aSSemBlY2

FUSelaGe BOttOm aSSemBlY3

enGIne aSSemBlY4

Kit 5623 - Kit 5623 - Page 3

pOd / mISSIle aSSemBlY17

RIGHT

RIGHT

RIGHT

LEFT

LEFT

61LEFT



60 RIGHT



16INTAKE

GLOSS WHITE INSIDE

17INTAKE

GLOSS WHITE INSIDE


81FUEL TANK


81FUEL TANK


52 TANK FIN

GLOSS WHITE

52 TANK FIN

GLOSS WHITE

80FUEL TANKTOP HALF

GLOSS WHITE

80FUEL TANKTOP HALF

GLOSS WHITE

116RIGHT


96CHAFF POD HALF

GLOSS WHITE

95CHAFF POD HALF

GLOSS WHITE

102SHRIKE MISSILE

HALFGLOSS WHITE

100SHRIKE MISSILE

HALFGLOSS WHITE

51STEADY BRACES

GLOSS WHITE

111PYLON

GLOSS WHITE 90LEFT

PYLONGLOSS WHITE

111RIGHTPYLON

GLOSS WHITE

101RIGHTRAIL

GLOSS WHITE

114LEFTRAIL

GLOSS WHITE

92LEFT



STEELSTEEL

11FUSELAGE BOTTOM

15TAIL

HOOK

1RIGHT

FUSELAGE HALF

2LEFT

FUSELAGE HALF

PAINT NOTE:SHADED AREA

DARK GULL GRAY(BOTH HALVES)

CUT OUT HOLE IF USING STEADY BRACE # 210 IN STEP 12

cOcKpIt aSSemBlY1 decal placement18

Kit 5623 - Page 2 Kit 5623 -

45SEAT TOPFLAT BLACK

FLAT BLACK

SILVER

44RIGHT

SEAT SIDEFLAT BLACK

43LEFT

SEAT SIDEFLAT BLACK

46SEAT FRONT

OLIVE DRAB

YELLOW WITH BLACK STRIPS

41INSTRUMENT PANELDARK GULL GRAY WITH

BLACK PANELS, GRAY KNOBS AND SILVER SWITCHES

39INTERIOR BUCKET

DARK GULL GRAY(FLAT BLACK CONSOLES WITH SILVER SWITCHES)

47CONTROL STICKDARK GULL GRAY

(PAINT FLAT BLACK GRIP)

77PILOT ARM


OFFICERS ARM


OFFICER

76PILOT

PAINT NOTE:FLIGHT SUITS AND GLOVES ARE OLIVE GREEN,

BOOTS AND VISORS ARE BLACK, HELMETS ARE USUALLY WHITE, BUT CAN BE OF ANY COLOR.

DECAL NOTE:SEE STEP 18

FOR INSTRUMENT PANEL DECAL PLACEMENT

decal placement19

Flat Black

Green

Olive Drab

Flat Dk. Gull Gray

Gloss Gull Gray

Flat Tan

Red

Gloss Yellow

Gloss White

Silver

* REPEAT SEVERAL TIMES* A REPETER PLUSIEURS FOIS

* CEMENT TOGETHER* A COLLER

* ALTERNATIVE ASSEMBLY* ENSEMBLAGE ALTERNATIVE

* REMOVE AND THROW AWAY* A RETIRER ET JETER

* DO NOT CEMENT* NE PAS COLLER

* OPTIONAL PARTS* PIECES EN OPTION

* DECAL * DECAL COMANIE

this paint guide is provided to complete this kit as shown on the box.

Ce guide de peintures est fourni pour reproduire le modèle réduit qui apparaît sur la boîte.

Noir mat

Vert

Gris vert

Gris cendré fonce mat

Gris cendré clair brillian

Havane mat

Rouge

Jaune brilliant

Blanc brilliant

Argent

* Study the assembly drawings.* Each plastic part is identified by a number.* In the assembly drawings, some parts will be

marked by a star (★) to indicate chrome plated plastic.

* For better paint and decal adhesion, wash the plastic parts in a mild detergent solution. Rinse and let air dry.

* Check the fit of each piece before cementing in place.

* Use only cement for polystyrene plastic.* Scrape plating and paint from areas

to be cemented.* Allow paint to dry thoroughly before

handling parts.* Any unused parts may be discarded.

decal applIcatIOn InStRUctIOnS

1. Cut desired decal from sheet.2. Dip decal in water for a few seconds.3. Place wet decal on paper towel.4. Wait until decal is movable on paper backing.5. Place decal in position on model, face up and

slide backing away.6. Press out air bubbles with a soft damp cloth.7. Milkiness that may appear is for better decal

adhesion and will dry clear. Wipe away any excess adhesive.

8. Do not touch decal until fully dry.9. Allow the decals 48 hours to dry before

applying clear coat.

nOte: decals are compatible with setting solutions or solvents.

Read tHIS BeFORe YOU BeGIn lIRe ce QUI SUIt aVant de cOmmenceR

* Etudier les schémas de montage.* Chaque pièce en plastique est identifiée par un numéro.* Sur les schémas de montage, certaines pièces sont

marquées d'une étoile (★) pour indiquer qu'elles sont en plastique chromé.

* Pour une meilleure prise de la peinture et des autocollants, laver les pièces en plastique avec une solution détergente peu concentrée. Les rincer et les laisser sécher à l'air.

* Vérifier que chaque pièce s'ajuste bien avant de la coller en place.

* N'utiliser que de la colle pour polystyrène.* Gratter les parties à coller pour enlever le chrome et la peinture.* Laisser la peinture bien sécher avant de manipuler les pièces.* Toute pièce inutilisée peut être jetée.

dIRectIVeS d'applIcatIOn deS aUtOcOllantS

1. Découper l'autocollant désiré de la feuille.2. Tremper l'autocollant dans de l'eau pendant quelques secondes.3. Placer l'autocollant mouillé sur une serviette en papier.4. Attendez que l'autocollant puisse être déplacé sur son

support en papier.5. Mettre l'autocollant en position sur le modèle face sur

le dessus et faire glisser le support pour l'enlever.6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.7. La substance laiteuse qui peut apparaître est destinée à

améliorer l'adhésion de l'autocollant et devient incolore au séchage. Essuyer pour enlever tout excédent d'adhésif.

8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.9. Laisser l'autocollant sécher pendant 48 heures avant

d'appliquer une couche transparente.

RemaRQUe: les autocollants sont compatibles avec les solutions de fixage ou les solvants.

ea-6a WIld WeaSel KIT 5623 85562300200

If you have any questions or comments, call our hotline at: (800) 833-3570or, please write to:

Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007Be sure to include the plan number (85562300200), part number, description, your return address and phone number.

Visit our website: www.revell.com

Revell Inc Elk Grove Village, IL. Copyright © 2009. All rights reserved.

Kit 5623 -

Developed as an evolutionary vari-ant of the original Grumman A2F-1H, the sophisticated EA-6A was con-struction in the mid-sixties as a dedi-cated Electronic Intelligence (ELINT) and Electronic Countermeasures (ECM) aircraft. Its primary mission was to "jam" enimy surface-to-air missile radar emissions to protect U.S. Navy and Marine attack aircraft. Your Revell model features exter-nal ornance such as ALQ-76 jam-ming pods, two shrike missiles, ALE-41 chaff dispenser pod plus external fuel tanks, detailed land-ing gear and cockpit with two crew figures. Authentic decal markings for two versions is also included.

Download - Monogram EA-6A Intruder

Top Related