Download - Leading through passion Cold Milling Machinesmedia.wirtgen-group.com/media/02_wirtgen/media_1/media_1_01_cold... · – Ergonomic multifunctional armrest with color control screen

Leading through passion

Cold Milling MachinesW 100 CF i | W 120 CF i | W 130 CF i

The outstanding innovations of the new, compact front loaders

5 Time-saving pivoting mechanism – Quick, automatic pivoting of the right-hand rear track unit or

wheel without having to lower the milling drum to the ground – Heavy-duty swivel joint via large friction bearing – Additional third position of right-hand rear track unit or wheel

6 Quick and dynamic maneuvering – Larger steering angle for small turning circles – Highly precise steering via fi ngertip steering system – Travel speed of up to 4.7 mph (7.5 km / h) – “Stop” and “Go” system for truck driver

Innovations in driving and steering Pages 6 / 7

2 Multifunctional armrest boosts effi ciency – Ergonomic multifunctional armrest with color control screen – User-programmable “Favorites” keys – Additional machine height adjustment included in armrest – Record and display the job data on the control screen

1 Intuitive, precise leveling with LEVEL PRO PLUS – Simple, intuitive handling – Many new additional features and automated functions – Management system fully integrated into the machine – New hydraulic cylinders at the side plates with integrated

displacement sensors for leveling control

3 Unmatched visibility concept – Reduced width of the machine frame on the right for an

optimized view to the front – Side-moving operator’s platform for signifi cantly optimized

visibility – High-quality camera system including display of the milling

edge

Innovations in operationPages 4 / 5

4 Operator comfort – Heated driver’s seat swiveling to either side – Convenient machine access including “Welcome” and

“Go home” lights – Additional height adjustment in increments of 1/16” (1 mm)

or 3/16” (5 mm) – Scraper position is displayed on the control screen – Wind and weather protection equipment – Electro-hydraulic power pack

1

2

3

4

5

6

2 //3

10 High traction ensured by optimized weight and automatic lowering of the milling drum into working position

– Many new automated functions signifi cantly reduce operator interventions

– Automated process of lowering the milling drum into working position including relief sensors

– Transport made easy by compact dimensions and low weight

9 High effi ciency ensures tremendous productivity – Most environmentally friendly engine technology in

emission standard EC Stage 4 / US Tier 4 Final – Tremendous engine power with increased maximum torque – Three different milling drum speed options – State-of-the-art engine control for lowest diesel consump-

tion rates – Minimized noise emissions

Innovations in performance and productivity Pages 10 / 11

8 Unrivaled discharge conveyor fl exibility – Extremely wide conveyor slewing angle of 60° to the

left and right – Two slewing speeds for precise loading of the milled

material – Quick-release coupling for easy mounting and

removal of the discharge conveyor

7 Maximum performance with new milling drum unit – Overload sensor at the scraper and active fl oating position

at the side plates, left and right – Active control of the scraper height by means of an

ultrasonic sensor – Milling fl ush to curb on the right at maximum milling depth – Quick replacement of tools via the milling drum turning device

Innovations in milling and loading Pages 8 / 9

10

8

9

7

Innovations in operation

INTUITIVE LEVELING

The new LEVEL PRO PLUS leveling sys-

tem offers simple and intuitive operation,

guaranteeing high-quality, highly precise

milling results.

FULLY INTEGRATED LEVELING SYSTEM

Full integration of the LEVEL PRO PLUS leveling

system into the machine management system

allows a high degree of automation.

4 //5

“FAVORITES” KEYSFour “FAVORITES” keys can be programmed with 15 different functions.

ELECTRO-HYDRAULIC POWER PACKThe electro-hydraulic power pack caters to functions such as canopy height adjustment, drum turning device, cutting tool extractor and various emer-gency functions, thus increasing the machine’s fl exibility on site.

WEATHER PROTECTIONAdditional wind and weather protection equipment offers protection from exposure to rain and wind.

CAMERA SYSTEMThe optimized camera system provides the machine operator with a high-resolution image of the milling drum or point of material discharge.

JOB DATAPertinent job details are provided automatically to allow logging of daily performance rates.

ERGONOMIC DRIVER’S SEATThe driver’s seat, with integrated seat heating, can be swiveled to the left and right to offer an excellent view to the side and to the rear.

“WELCOME” AND “GO HOME” LIGHTSAccess and operator’s platform are fully illuminated when approaching or walking away from the machine.

HEIGHT ADJUSTMENT IN INCREMENTSA new feature on the left control console enables precise adjustment of the milling depth in increments of 1/16” (1 mm) or 3/16” (5 mm) respectively.

SIDE-MOVING OPERATOR’S PLATFORMThe operator’s platform can be moved outwards by 8” (200 mm) hydraulical-ly, enabling an optimal view of the area ahead of the milling drum unit and of the right-hand front track unit or wheel.

4 //5

EXCELLENT VISIBILITY

The slender design of the machine

frame provides a free view to the

front and of the milling edge.

MULTIFUNCTIONAL ARMREST

The multifunctional, individually ad-

justable armrest combines innovative

design and user-friendliness. Impor-

tant information is displayed on the

color control screen.

SCRAPER POSITION

The position of the scraper is

measured via a displacement

sensor and then displayed on the

control screen.

LEVELING OPERATION

High-precision displacement sensors

installed in the hydraulic cylinders of

the side plates measure the milling

depth which is then displayed on the

high-resolution LEVEL PRO PLUS

control screen.

LEVEL PRO PLUS leveling system. View of the area ahead of the milled surface.

Innovations in driving and steering

AUTOMATIC TRACKING FEATURE

Automatic tracking of the right-hand rear wheel when pivoted

in front of the drum gives the machine unrivaled maneuverability.

AUTOMATIC PIVOTING FEATUREThe right-hand rear track unit or wheel is pivot-ed quickly and automatically without having to lower the milling drum to the ground or unlock a bolt manually.

FINGERTIP STEERING

The highly precise hydraulic steering system

enables the machine to be steered quickly and

smoothly via the steering wheel as well as the

right-hand armrest.

6 //76 //7

LARGE STEERING ANGLE

The steering angle of the front

axle has been increased to

ensure the smallest possible

turning circles.

STOPLIGHT SYSTEM

The “stop-and-go” system folds

out hydraulically and enables

visual, silent communication with

the truck driver driving in front.

MASSIVE FRICTION BEARING The robust, wear-resistant friction bearing minimizes the amount of kine-matic play to ensure consistently precise milling results.

MAXIMUM SPEED OF 4.7 MPH (7.5 KM / H)The driving dynamics package, offering travel speeds of up to 4.7 mph (7.5 km / h), ensures an especially quick completion of construction projects even when fi tted with track units.

THREE POSITIONS OF THE RIGHT-HAND REAR TRACK UNIT OR WHEEL (FOR MILLING WIDTHS OF 39” (1,000 MM) AND 48” (1,200 MM) ONLY)The operator can choose between three different positions: neutral, extend-ed and pivoted-in. In extended position, the track unit or wheel runs inside the cutting circle which enables easy positioning right next to the neighbor-ing milled cut on the right.

Track unit or wheel in pivoted-in position.

Track unit or wheel in extended position.Track unit or wheel in neutral position.

Innovations in milling and loading

QUICK-RELEASE COUPLING

The quick-release coupling ensures

easy plugging of hydraulic

connections when mounting or

removing the discharge conveyor.

SIDE PLATE LIFT OF 18” (450 MM), RIGHT

Milling flush to curb is possible also at large working depths. The large side plate

lift enables a curb to be used as a level reference.

HEAVY-DUTY CONVEYOR SUSPENSION

The flexibility of the discharge conveyor is

increased by the innovative, heavy-duty

conveyor suspension.

8 //9

OVERLOAD SENSORS AND ACTIVE FLOATING POSITIONThese smart automated functions prompt the scraper or side plates to be raised briefl y, for example, to prevent sinking in on soft ground.

ACTIVE SCRAPER HEIGHT CONTROLActive control of the scraper height by means of an ultrasonic sensor op-timizes productivity and minimizes wear and tear of the milling drum and milling drum housing when leaving the milled material in the cut.

OPTIMIZED VACUUM CUTTING SYSTEMThe suction channel of the vacuum cutting system is designed for optimal fl ow.

MILLING DRUM TURNING DEVICEThe hydraulically operated milling drum turning device and cutting tool extractor make easy work of tool replacement even with the engine switched off.

WEAR PROTECTION SEGMENTSThe durability of the side plates is improved by welded-in wear protection segments.

MILLING DEPTH OF 13” (330 MM)The new cold milling machine achieves maximum milling depths of 13” (330 mm).

The intelligently designed milling drum is the core element of the 39” (1,000 mm) cold milling machine.

EXTREMELY LARGE

CONVEYOR SWING ANGLE

Large conveyor swing angles of 60°

to each the left and right enable the

material to be loaded even in diffi cult

situations, for example, in road junc-

tions or turning bays.

VARIABLE SWING SPEED

Swing the discharge conveyor at slow

speed to allow precise loading of the

milled material or at high speed opti-

mizes the entire milling process.

8 //9

Innovations in performance and productivity

EXHAUST GAS AFTER-TREATMENT

The environmentally friendly diesel engine

uses SCR to comply with the strict require-

ments of the currently highest emission

standards EC Stage 4 / US Tier 4 Final.

ADBLUE / DEF TANK

Storage container for urea solution

with easily accessible filling port.

10 //11

COMPACT DIMENSIONSOptimized machine weight and compact dimensions ensure easy transport.

FEWER OPERATOR INTERVENTIONSThe WIDRIVE machine management system includes many new automated features for simple operation.

AUTOMATED LOWERING OF THE DRUM INTO WORKING POSITIONThe automated process of lowering the milling drum into working position uses relief sensors to prevent inadvertent lifting of the rear wheels or track units.

DIFFERENT MILLING DRUM SPEEDSThree different milling drum speeds enable optimum milling performance in a wide range of applications.

LOAD-DEPENDENT WATER SPRAY SYSTEMThe amount of water injected to cool the cutting tools increases auto-matically in relation to the increase in engine load. It can, however, also be directly adjusted electrically from the operator’s platform.

LARGE WATER TANKThe larger water tank volume increases the productivity of the cold milling machine.

MINIMUM NOISE LEVELS

Optimized machine settings and

an even more effective sound-

proofing significantly reduce

noise emissions.

STATE-OF-THE-ART

ENGINE CONTROL

The engine speed is governed in

accordance with the load to ensure

the lowest fuel consumption rates.

Top-performing, yet fuel-efficient and environmentally friendly engine technology.

HIGH ENGINE POWER

Significantly higher engine

power and increased maxi-

mum torque guarantee fast,

productive operation even at

the maximum milling depth.

10 //11

Technical specification

Milling drum W 100 CF i W 120 CF i W 130 CF iMilling width 39” (1,000 mm) 48” (1,200 mm) 51” (1,300 mm)Milling depth *¹ 0 – 13” (0 – 330 mm) 0 – 13” (0 – 330 mm) 0 – 13” (0 – 330 mm)Tool spacing 5/8” (15 mm) 5/8” (15 mm) 5/8” (15 mm)Number of cutting tools 99 115 121 Drum diameter with tools 39” (980 mm) 39” (980 mm) 39” (980 mm)EngineEngine manufacturer CumminsType QSL 9Cooling WaterNumber of cylinders 6Rated power at 2,100 rpm 248 kW / 332 HP / 337 PSMaximum output at 1,900 rpm 257 kW / 345 HP / 350 PSDisplacement 2.4 gal (8.9 l)Fuel consumption at rated power 17.7 gal / h (67 l / h)Fuel consumption in field mix 7.1 gal / h (27 l / h)Emission standards EC Stage 4 / US Tier 4f Electrical system 24 VTank capacitiesFuel tank 162 gal (610 l)Hydraulic oil tank 34 gal (130 l)Water tank 370 gal (1,400 l) 423 gal (1,600 l) 423 gal (1,600 l)Driving propertiesMax. milling speed 0 to 105 ft (0 to 32 m / min) (1.2 mph (1.9 km / h))Max. travel speed in wheeled design 0 to 410 ft (0 to 125 m / min) (4.7 mph (7.5 km / h))Max. travel speed in tracked design 0 to 410 ft (0 to 125 m / min) (4.7 mph (7.5 km / h))Track units or wheelsWheel size, front and rear (Ø x W) 26” x 11” (660 x 280 mm)Track units, front and rear (L x W x H) 52” x 10” x 22” (1,330 x 260 x 550 mm)Loading of the milled materialBelt width of primary conveyor 26” (650 mm)Belt width of discharge conveyor 24” (600 mm)Theoretical capacity of discharge conveyor 230 yd3 / h (176 m³ / h)Shipping dimensionsMachine, track unit or wheel pivoted outMilling width 39” (1,000 mm) (L x W x H) 20’ 10” x 8’ 4” x 9’ 10” (6,350 x 2,540 x 3,000 mm)Milling width 48” (1,200 mm) (L x W x H) 20’ 10” x 8’ 9” x 9’ 10” (6,350 x 2,660 x 3,000 mm)Milling width 51” (1,300 mm) (L x W x H) 20’ 10” x 9’ 1” x 9’ 10” (6,350 x 2,760 x 3,000 mm)Machine, track unit or wheel pivoted inMilling width 39” (1,000 mm) (L x W x H) 20’ 10” x 7’ x 9’ 10” (6,350 x 2,120 x 3,000 mm)Milling width 48” (1,200 mm) (L x W x H) 20’ 10” x 7’ 4” x 9’ 10” (6,350 x 2,240 x 3,000 mm)Milling width 51” (1,300 mm( (L x W x H) 20’ 10” x 7’ 8” x 9’ 10” (6,350 x 2,340 x 3,000 mm)Discharge conveyor (L x W x H) 26’ 11” x 48” x 59” (8,200 x 1,200 x 1,500 mm)

*1 = The maximum milling depth may deviate from the value indicated, due to tolerances and wear.

*2 = Weight of machine with half-full water tank, half-full fuel tank, driver (165 lbs (75 kg)) and on-board tools

Machine weights W 100 CF i W 120 CF i W 130 CF i

Empty weight of machine without tank contents 39,242 lbs (17,800 kg)

41,226 lbs(18,700 kg)

42,108 lbs (19,100 kg)

Operating weight, CE *2 41,667 lbs (18,900 kg)

43,872 lbs (19,900 kg)

44,754 lbs (20,300 kg)

Maximum operating weight (full tanks, full range of equipment) 50,486 lbs (22,900 kg)

53,352 lbs (24,200 kg)

54,234 lbs (24,600 kg)

Weights of tank contents

Water tank filling in lbs (kg) 3,087 lbs (1,400 kg)

3,527 lbs (1,600 kg)

3,527 lbs (1,600 kg)

Diesel tank filling in lbs (kg) (6.93 lbs / gal (0.83 kg / l)) 1,116 lbs (506 kg)

Optional equipment features increasing / reducing empty weight

Driver and tools

Driver 165 lbs (75 kg)

Weight of 5 cutting tool containers 276 lbs (125 kg)

On-board tools 66 lbs (30 kg)

Optional milling drum assemblies in lieu of standard

Milling drum housing, milling width 39” (1,000 mm), FCS 617 lbs (280 kg)



Tandem scraper 397 lbs (180 kg)

Optional milling drums in lieu of standard

Milling drum, milling width 39” (1,000 mm), tool spacing 5/8” (15 mm), HT22, FCS 132 lbs (60 kg)





Milling drum, milling width 51” (1,300 mm), tool spacing 5/16” (8 mm), HT22, FCS 1,014 lbs (460 kg)

Milling drum, milling width 39” (1,000 mm), tool spacing 1/4 x2” (6x2 mm), HT5, FCS 706 lbs (320 kg)



Optional additional equipment

Track units in lieu of wheels 2,866 lbs (1,300 kg)

Canopy in lieu of standard 441 lbs (200 kg)

Short folding conveyor in lieu of standard 88 lbs (40 kg)

Long folding conveyor in lieu of standard 198 lbs (90 kg)

VCS – vacuum cutting system 331 lbs (150 kg)

Supplementary weight, milling width 39” (1,000 mm) 882 lbs (400 kg)

Supplementary weight, milling width 48” (1,200 mm) or 51” (1,300 mm) 1,135 lbs (515 kg)

12 //13

Technical specifi cation

Dimensions in American standard and mm

W 100 CF i, W 120 CF i, W 130 CF i

FB A1 A2 B C D E F

39” (1,000)

8’ 4”(2,540)

7’(2,120)

6’ 5”(1,945)

13” (330)

25” (625)

6”(145)

-2”(-50)

48”(1,200)

8’ 9”(2,660)

7’ 4”(2,240)

6’ 11” (2,095)

13” (330)

23”(575)

6”(145)

4”(100)

51”(1,300)

9’ 1”(2,760)

7’ 8”(2,340)

7’ 2”(2,195)

13” (330)

23”(575)

10”(245)

4”(100)

40’ 11” (12,480) (38’ 8” * (11,780 *))

34’ 9” (10,580) (31’ 9” * (9,680 *))

20’ 10” (6,350)

49”(1,240)

10’ 5”(3,185)

12’ 4

” (3

,750

)

9’ 1

0” (3

,000

)

9’ 1

0” (3

,000

)

30”

(770

) (2

6” *(

650

*))

18’ 1

” (5

,500

) (1

6’ 5

” * (5

,000

*))

6’ 4”(1,925)

* = short conveyor in folding design

4’ 7

” (1

,400

)

E

3 /8”

(10)23

” (5

85)

Rmin =

5’ 3” (1,600)

A1

A2

BC D F

FB

60°

60°

43”

(1,0

80)

51”

(1,2

85)

24”

(600

)

Basic machine Water-cooled engine with three selectable operating speed

ranges Water cooler with temperature-related fan speed Highly effective soundproofing of entire engine compartment Automatic engine speed control in accordance with the driving

situation Anti-vibration mounted engine station for low vibration and noise

levels Standard painting in Wirtgen white with orange stripes

Milling drum assembly Hard-wearing milling drum housing Reinforced, hard-wearing milling drum gearbox Hydraulically lifting side plates, left and right Milling drum housing can simply be opened on the right for

maintenance procedures or tool replacement Hydraulically operated scraper with mechanical locking

mechanism Water spray bar in the milling drum housing Right-hand side plate lift of 18” (450 mm)

Milling drums Milling drum, milling width 39” (1,000 mm), 48” (1,200 mm) or

51” (1,300 mm), HT22 quick-change toolholder system, tool spacing 5/8” (15 mm)

Full set of point-attack cutting toolsLoading of the milled material

Machine including hydraulic pre-installation for discharge conveyor including hydraulic screw coupling

Discharge conveyor, 26’ 9” (8,150 mm) long with 24” (600 mm) wide belt, in non-folding design

Discharge conveyor slewing angle 60° to the left, 60° to the right Discharge conveyor with adjustable conveying speed and two

slewing speeds for precise loading operationsMachine and leveling control

Digital milling depth display on the control screen. Measurement is effected via cylinder sensors in the lifting columns. Three each user-programmable milling depth memory locations for both machine sides.

Four user-programmable “FAVORITES” keys in right-hand multifunctional armrest

Precise machine height adjustment in increments of 1/16” (1 mm) or 3/16” (5 mm) at the main control panel

Digital load control and additionally engageable differential lock via hydraulic flow divider

Machine pre-installed for retrofitting with WITOS FleetView

Operator’s platform Ergonomic multifunctional armrest, right, including display

of all important operation parameters on color screen Standard driver’s seat, shock-absorbing and with longitudinal

adjustment Operator’s platform side-movable by 8” (200 mm) hydraulically

to allow an optimum view of the working area Slender machine design enables a full view of the right-hand

milling edge and working area in front of the milling drum Convenient access to the operator’s platform including

“Go home” night lighting and low-rise bottom edge Robust anti-vandalism control covers Mirror package comprising rear-view mirrors at the front left and

right, as well as one forward-facing mirror to the left of the operator’s platform

Reversing horn with clearly audible sound Illuminated control panel / night design

Chassis and height adjustment Wheeled design with four driven wheel units achieving a travel

speed of max. 4.7 mph (7.5 km / h) Hydraulically pivotable, self-steering rear-right wheel unit Hydraulic proportional height adjustment at the rear wheel units

offering two different speed settings Hydraulic height adjustment at the front wheel units

Miscellaneous Halogen lighting package, 24 V, including flashing beacon Comprehensive tool kit Generously dimensioned water and fuel tanks Comprehensive safety package with several emergency

stop switches European design type certification, GS mark (Geprüfte

Sicherheit = Tested Safety) and CE conformity Standard warranty of 12 months or 1,000 engine operating hours Machine commissioning by qualified personnel

Standard equipment features

Equipment features

Basic machine Air compressor system Special painting in one, two or several colors

Milling drum assembly Wear-resistant FCS milling drum housing including

pre-installation kit for the quick and easy replacement of milling drums

FCS tandem scraper for use with milling drums of reduced milling widths

Adapter set for installation of the milling drum on the left to ensure optimum material loading at reduced milling widths

“Milling” performance package: - Sensors for active floating position at the side plates, left and right - Overload sensor at the scraper to initiate automatic raising when

encountering an obstacle - Active control of scraper height by means of an ultrasonic sensor - Display of scraper height on control screen - Reversing with milling drum engaged

Pneumatically driven tool extractor with tools for the simple extraction and insertion of cutting tools

Hydraulically driven tool extractor, complete with holder and the relevant electric and hydraulic connections

Hydraulic milling drum turning device for tool replacementFCS milling drums (Flexible Cutter System)

FCS milling drum, milling width 12” (300 mm), tool spacing 7/16” (12 mm), HT22 quick-change toolholder system, in-cluding scraper bottom part for milling width 12” (300 mm)

FCS milling drum, milling width 20” (500 mm), tool spacing 5/8” (15 mm), HT22 quick-change toolholder system, includ-ing scraper bottom part for milling width 20” (500 mm)

FCS milling drum, milling width 24” (600 mm), tool spacing 7/16” (12 mm), HT22 quick-change toolholder system, in-cluding scraper bottom part for milling width 24” (600 mm)

FCS milling drum, milling width 35” (900 mm), tool spacing 5/8” (15 mm), HT22 quick-change toolholder system, includ-ing scraper bottom part for milling width 35” (900 mm)

FCS milling drum, tool spacing 1/4 x2” (6x2 mm), HT5 Plus welded toolholder system

FCS milling drums, tool spacing 5/16” (8 mm), HT22 quick-change toolholder system

FCS milling drums, tool spacing 11/16” (18 mm), HT22 quick-change toolholder system

FCS milling drums, tool spacing 1” (25 mm), HT22 quick-change toolholder system

Mounting carriage for milling drums with a milling width of up to 51” (1,300 mm)

Loading of the milled material Machine including hydraulic pre-installation for discharge

conveyor including hydraulic quick-release coupling Discharge conveyor, 26’ 9” (8,150 mm) long with

24” (600 mm) wide belt, in hydraulic folding design Short discharge conveyor, 23’ 9” (7,250 mm) long with

24” (600 mm) wide belt, in hydraulic folding design

VCS extraction system Fold-in stoplight system for trucks

Machine and leveling control LEVEL PRO PLUS leveling system, left and right, with

sensors installed in the hydraulic cylinders of the side plate lifting feature

SONIC SKI ultrasonic sensor for additional level scanning RAPID SLOPE sensor for additional cross slope leveling WITOS FleetView (available in approved countries)

Operator’s platform Hydraulically lowering canopy including additional weather

protection equipment for the operator’s platform Comfort driver’s seat including seat heating and swivel

feature, shock-absorbing and with longitudinal adjustment Screen system including two cameras and additional

screen Heated and electrically adjustable exterior mirror, front left

Chassis and height adjustment Tracked design with four driven track units achieving a

travel speed of max. 3.6 mph (5.8 km / h). Hydraulically pivotable, self-steering rear-right track unit.

Driving dynamics package, tracked model: - Optimized hydraulic motors for travel speeds of up to

4.7 mph (7.5 km / h) - Proportionally responsive fingertip steering included in

multi functional armrest

Miscellaneous Electro-hydraulic power pack to drive the milling drum

turning device, hydraulic cutting tool extractor and various hydraulic functions with the diesel engine switched off

High-pressure water cleaner, 2,756 psi (190 bar), 4 gal / min (15 l / min)

Hydraulically driven water filling pump (19 gal / min (72 l / min) at max. 87 psi (6 bar))

High-performance LED lighting package, 24 V, including flashing beacon

Supplementary weight of 882 lbs (400 kg) for milling width 39” (1,000 mm); supplementary weight of 1,135 lbs (515 kg) for milling widths 48” (1,200 mm) and 51” (1,300 mm)

Electrical preheating of fuel filter

Optional equipment features

14 //16

Wirtgen America Inc.6030 Dana Way · Nashville, TN 37013, USA

Phone: (615) 501-0600 · Fax: (615) 501-0691Internet: www.wirtgenamerica.com

Illustrations and texts are non-binding and may include customized fi ttings. Subject to technical changes. Performance data depend on operational conditions. No. 2442045 10-11 US-10/14 © by Wirtgen GmbH 2014 Printed in Germany

WI-2442045

Download - Leading through passion Cold Milling Machinesmedia.wirtgen-group.com/media/02_wirtgen/media_1/media_1_01_cold... · – Ergonomic multifunctional armrest with color control screen

Top Related