Handmade Designs-DIY Bridesmaid Jewelry
Earrings out of Pearls
Creating new jewelry handmade designs is about
more than spending money and being able to show off
what we’ve made; it’s about being connected to the
daily life and personal emotions. Here, in this post I
will show you how to make a pair of DIY bridesmaid
jewelry earrings using cost-effective acrylic pearl
beads. To complete this idea, you’ll merely need half
an hour of preparation.
Supplies needed in this bridesmaid jewelry:
6mm Acrylic Pearl Bead
12mm Crackle Glass Bead
10mm Faceted-round Glass Bead
(2 types) Bead Cap
Headpin
Eyepin
Earring Hook
Flat Nose Pliers
Round Nose Pliers
Side Cutting Pliers
How to create the jewelry handmade designs?
Step1: preparation of components Step 2: group the above parts
Want to create just-sweet-enough jewelry handmade designs for a girlfriends’ wedding? You can follow
these instructions for a pair of DIY bridesmaid jewelry earrings out of lightweight but vivid acrylic pearl
beads.
For one earring, you need: bead*3, eyepin*1,
headpin*2, bead cap*3.
Slide the bead and matching bead cap onto a pin
as picture the shows. Loop the end.
1. Hook a loop from the 10mm bead to the
12mm bead.
Step 4: make a complete pair
Repeat all the above steps and you will ac complete pair of DIY bridesmaid jewelry
These DIY bridesmaid jewelry earrings are so
adorable, aren’t they? All elements are handmade
and make use of simple yet affordable acrylic pearls
and transparent crackle glass beads. For those of you
who desire a remarkable and meaningful wedding,
you all deserve to make receive these jewelry
handmade designs!
Shop for a variety of beads and jewelry findings welcome to visit our webpage at:
http://www.pandahall.com/
2. Hang the pearl beads from the holes in the
bead cap. One hole can hold two dangles; use
about 12 pieces for an earring.
Step 3: add on earring hook
On the top loop, attach an earring hook.