How To Make: Twisted Copper Pendant

Materials:

7 inches of 20 gauge copper wire7 inches of 28 gauge copper wire (cut in half to attach pink beads to the base)1 glass bead - size 4 mm2 pink beads - size 2,5 mm

Tools:Round Nose PliersWire Cutters

Step 1:

Insert one glass bead onto the wire and make a little loop with bead inside

Step 2:Create two loops as shown on the photo

Step 3:

Trim one wire

Step 4:

Create two loops as shown on the photo

Step 5:

Bend wire as shown on the photo, then create a hook shape in order to make a final loop. Trim wire if you need to

Step 6:

Wrap one thin wire around the base as shown on the photo, then insert pink bead onto the wire

Step 7:

Now wrap the wire around the base as shown. Trim all the wires

Step 8:

Repeat step 6 and 7 with second pink bead. Add chain to your pendant. Your necklace is ready to wear!