How To Make: Dazzling Fall Necklace
Materials: 9.5 inches of 20 gauge copper wire, 5 inches of 22 gauge copper wire, 1 red barrel bead - size 10 mm x 6 mm, 1 orange bead - size 4 mm, 1 copper bead - size 3 mm, 1 copper bead - size 2 mm
Tools: Round Nose Pliers, Wire Cutters
Step 1: Bend wire as shown on the photos to create small loop
Step 2: Insert a bead onto the wire and unbend the wires as shown
Step 3: First bend wires as shown on the photo, then insert a copper bead onto both wires
Step 4: Wrap one wire around the other and cut the rest of it, with the second wire (which is left) create a hook shape in order to make a "hanging loop". Trim the wire which is left
Step 5: Take the 22 G wire, insert a small bead onto the wire and then bend it like on the photo
Step 6: Wrap this part around the base as it is shown
Step 7: Wrap wires which are left around the base, then insert a copper bead -size 2mm- onto both wires
Step 8: Create small loops at the ends of the wires, then attach the chain. Your necklace is ready to wear