How To Make: Bright Fun Earrings

Materials: 9” of 20 gauge copper Wire cut into 2 even piece, 2 copper beads – size 2 mm, 2 copper beads – size 3 mm, 2 stone beads - size 8 mm, 2 stone beads – size 12 mm, 6 beadcaps, pair of earwires

Tools: Round Nose Pliers, Wire Cutters

Step 1: Create small loop at the end of the wire

Step 2: Bend wire as shown in the photo and insert a bead

Step 3: Create 2 small loops as shown in the photo

Step 4: Create 3 rd , bigger loop and bend wire up (it should be located between 2 small loops)

Step 5: Insert the bead, bead caps and copper beads

Step 6: Create a loop, trim the wire if you need to and close the shape to create final loop. Repeat all the steps to create second earring. Now attach earwires. Your earrings are ready to wear!