Transcript
How To Make: Beaded Pearl Earrings
Materials: 6,3 inches of 20 gauge copper wire cut into 2 even pieces, 6,3 inches of 28 gauge copper wire cut into 2 even pieces, 2 faux/real pearl beads- size 10 mm, pair of earwires
Tools: Round Nose Pliers, Wire Cutters
Step 1: Create 1 loop in the middle of the wire
Step 2: Bend wire as shown in the photo. Wire should have a shape/size of the bead
Step 3: Wrap thin wire around the base then put the bead onto it. Wrap the rest of the wire around the base as shown in the photos. Trim wire which is left
Step 4: Create small loops as shown in the photos
Step 5: Repeat all steps to create second earring, then attach earwires. Your earrings are ready to wear!