HOW TO APPLY ISLAMIC WALL
ARTA very easy to follow instruction
By JR Decal http://www.jrdecal.com
PREPARATIONYou will need few things to start. Pencil to mark the place Dry cloth to clean the surface Masking tape to stick the wall
sticker temporarily (Optional) Scissor (Optional) ID card/Bank Card or a plastic
Squeegee
STEP 01
Step 01: Clean the surface with a dry cloth. Then
mark the desired place
STEP 02
Place the wall sticker on a plain table or hard surface then smooth out the backing paper using ID card/bank card or plastic squeegee, so that no bubble left.
STEP 03 Stick the wall sticker on the desired place using masking tape
STEP 04Carefully remove the backing paper at the flat angel to ensure that the decal remains adhere to the application tape
STEP 05Cut half of the backing paper .Then affix the decal to the desired location with the adhesive side facing the surface
STEP 06Smooth out the application tape using plastic squeegee or card, make sure the sticker is properly applied to the surface
STEP 07repeat step 03 to 06 for the rest of the sticker.
STEP 08Carefully peel off the application tape from the upper right corner at the flat angle. Peel completely. If any part is not affixed to the wall properly, press them using the squeegee.
STEP 09Done!
See your wall now.
