Download - Hafele Home Improvement Fittings

5/19/2018 Hafele Home Improvement Fittings

1/50

FF 6.1

CHAPTER 6Home Improvement Fittings


2/50

FF 6.2

6


3/50

Dimensions in mm

Inches are approximate

Prices Availability Ordering www.hafele.comCall +632 571 3683 - Manila +6332 345 3672 - Cebu

Dimensionaldata

notbinding.

Wereservetherighttoalterspecificationswithoutnotice.

Home Improvement Fittings

FF 6.3

6


Table of Contents

Wardrobe Fittings

TV and Hi - Fi Fittings

Bedroom Fittings

Ladders

Shelf System

Trouser racks

Sliding

Logo shelf system

Wardrobe rails

Hook-in

Tie and belt racks

Wardrobe lift

Pull-out storage system

Storage system

Lift systems

Furniture turntables

Wall and ceiling support brackets

Bed frame fittings

Foldaway bed fittings

6.37

6.43

6.4

6.39

6.6

6.9

6.10

6.14

6.15

6.25

6.29

6.36

6.31

6.21


4/50

Dimensionaldata

notbinding.


Dimensions in mm


Prices Availability Ordering www.hafele.comCall +632 571 3683 - Manila +6332 345 3672 - CebuFF 6.4

6


Wardrobe Fittings, wardrobe rails

Wardrobe rail

Wardrobe rail, welded

Rolled wardrobe ail with tightly closed seam

Material: Steel

Finish: Chrome plated

Material thickness: 0.8 - 1.5 mm

Height: 30 mm

Material thickness

mm

Cat. No.

0.8 801.03.220

1.0 801.13.220

1.2 801.10.229

1.5 801.09.226

Material: Steel

Finish: 1.0 mm Material thickness: 30 mm

Finish Cat. No.

Nickel plated 801.14.701

Brass plated 801.14.501

Finish Cat. No.

1,000 mm 801.33.902

2,000 mm 801.33.904

3,000 mm 801.33.906

Packing: 2.5 m

Packing: 2.5 m

Mounting pin: 5 mm

Packing: 10, 200 or 500 pieces

Packing: 10, 200 or 500 pieces

Rail end support, zinc alloy

Screw fixing to side panel in 32 mm series drilled holes

Screw fixing to side panel with mounting pin

Finish Cat. No.


Finish Cat. No.


Material: Aluminium

Finish: Aluminium anodized

Material thickness: 1.5 mm

Height: 30 mm

Packing: 1 piece

Wardrobe rail, aluminium

Packing: 10, or 200 pieces

Colour Cat. No.

White 803.21.740

Version: Screw fixing to side panel

Rail end support, plastic

Packing: 10, or 200 pieces

Colour Cat. No.

White 803.22.747

Version: Screw fixing to side panel, with mounting pin 10mm


5/50

Dimensions in mm



Dimensionaldata

notbinding.


FF 6.5

6


Wardrobe Fittings, wardrobe rails

Wardrobe rail, 20 mm

Finish Cat. No.


Colour Cat. No.

White 803.22.738

Finish Cat. No.


Rolled wardrobe rail with tightly closed seam

Material: Steel


Packing: 2.5 m

Supplied with

1 rail end support without thread

1 two-piece rail end support with thread

Rail end support, brass

Installation

Fix rail end supports to side panels.

Slide sleeve onto wardrobe rail.

Insert wardrobe rail into non-threaded rail end support.

Screw sleeve to threaded rail end support.

Version: Screw xing to side panel, three-piece

Packing: 5 or 50 pairs

Rail end support, plastic

Version: Screw xing to side panel

Installation: Plug in and screw xing

Packing: 10 or 200 pieces

Wardrobe rail, stainless steel 20 mm


Finish Cat. No.

Matt brushed 801.41.021

Finish Cat. No.

Nickel plated polished 801.11.741

Enamel polished 801.11.841

Finish Cat. No.


Bright 803.51.855

Finish Cat. No.


Packing: 2.5 m

Packing: 2.5 m

Rail end support, stainless steel 20 mm

Version: Screw xing to side panel

Packing: 2 pieces

Wardrobe rail, welded 25 mm

Material: Steel with brass coating


Rail end support 25 mm, stainless steel

Installation

Fix rail end supports to side panels.

Slide sleeve onto wardrobe rail.

Insert wardrobe rail into non-threaded rail end support.

Screw sleeve to threaded rail end support.

Version: Screw xing to side panel, three-piece

Supplied with

1 rail end support without thread

1 two-piece rail end support with thread

Packing: 5 or 25 pairs


6/50

Dimensionaldata

notbinding.


Dimensions in mm



6


Wardrobe Fittings, tie and belt racks

Material: Steel extension, plastic mounting block and spacer

Finish: Wire parts chrome plated polished,

silver coloured mounting block and spacer

Version: With glide and spacer for compensating for door

offsets, can be used right or left

Fixing material: Supplied

Extending rack, for 9 ties and 5 belts

Material: Steel

Finish: Polished chrome plated extension, runner cover

plastic coated white aluminium, RAL 9006

Version: For right and left hand use

Extending tie rack, for 17 ties

Packing: 1 piece

Packing: 1 piece

Packing: 1 piece

Packing: 1 piece

Installation width: 320 mm

Material: Steel rail, zinc alloy bearing

Finish: Chrome plated


Tie and belt rack, swivels by 90

Height Cat. No.

270 mm 807.16.203

Dimensions (W x D xH) Cat. No.

130 x 540 x 90 mm 807.41.206

Dimensions (W x D xH) Cat. No.74 x 455 x 118 mm 807.41.211

Extending rack, for 14 ties

Material: Steel extension, plastic mounting block and spacer

Finish: Wire parts chrome plated polished, silver coloured

mounting block and spacer

Version: With glide and spacer for compensating for door

offsets, can be used right or left


Dimensions (W x D xH) Cat. No.

74 x 455 x 87 mm 807.41.210


7/50

Dimensions in mm



Dimensionaldata

notbinding.


FF 6.7

6

Packing: 1 piece

Packing: 1 piece

Material: Aluminium support rack and rails,

plastic screw-on parts and hooks or clips

Finish: Support rack and rails silver coloured

Dimensions (W x D x H): 432 x 48 x 47 mm

Fixed mounted rack, for 7 belts

Colour Cat. No.

Plastic parts: Black 807.25.935

Plastic parts: Beige 807.25.945Plastic parts: Transparent 807.25.955

Extending rack, for 8 belts

Material: Aluminium support rack and rails,

plastic screw-on parts and hooks or clips

Finish: Support rack and rails silver coloured anodized

Dimensions (W x D): 500 x 76 mm

Colour Cat. No.

Plastic parts: Black 807.25.930

Plastic parts: Beige 807.25.940

Plastic parts: Transparent 807.25.950

anodized



Extending tie rack

Installation: For screw xing to side panel

Material: Prole: Aluminium,

holder: Plastic

Finish: Prole: Anodized

Dimensions (W x D x H): 410 x 70 x 88 mm

Colour Cat. No.

Support: Black 805.93.960

Packing: 1 piece


8/50

Dimensionaldata

notbinding.


Dimensions in mm



6

Rotating, with non-slip rails, for 12 ties Rotating, with 9 hooks

Material: Steel

Finish: Chrome plated polished Material: Steel

Finish: Chrome plated polished

Packing: 1 piece Packing: 1 piece

Packing: 1 piece

Basket

Extending

Material: Extension: Steel,

mounting block and spacer: Plastic

Finish: Wire parts: Chrome plated polished

Colour: Mounting block and spacer:

Silver coloured

Version: With glide and spacer to compensate for

door offset, can be used right or left

Fixing material supplied



Dimensions (W x D x H) Cat. No.

160 x 135 x 1325 mm 807.40.218


160 x 135 x 1325 mm 807.40.227


160 x 452 x 94 mm 805.47.200

Tie rack


9/50

Dimensions in mm



Dimensionaldata

notbinding.


FF 6.9

6

Extending wardrobe rails

Packing: 1 piece

Material: Profile: Steel,holder: Plastic

Finish: Profile: Chrome polished Colour: Holder: Black

Dimensions (W x D x H)mm

Cat. No.

40 x 305 x 50 805.04.690

Extending wardrobe rails for screw fixing

beneath shelves

Load capacity 30 35 kg, length 305 455 mm


Length Load bearing capacity Cat. No.

305 mm 30 kg 805.04.301

355 mm 805.04.356

405 mm 35 kg 805.04.409

455 mm 805.04.454

Material: Steel

Finish: Polished chrome plated extension,

runner cover plastic coated white aluminium,

Version: For right and left hand use, with non-slip rails

Extending trouser rack for 10 pairs of

trousers

Material: Steel

Finish: Chrome plated polished

Version: With non-slip rails

Swivelling trouser rack for 7 pairs of

trousers

RAL 9006


Wardrobe Fittings, trouser racks


430 x 430 x 75 mm 805.46.201


465 x 505 x 100 mm 805.45.204

Packing: 1 piece

Packing: 1 piece


10/50

Dimensionaldata

notbinding.


Dimensions in mm



6

Area of application: For hanging onto pull out frame

Material: Steel

Finish: White aluminium

Packing: 1 piece

Packing: 1 piece

Packing: 1 piece


Material: Steel


Version: Adjustable

Wire shelf

Wire basket

Pull-out wardrobe frame

Installation width Depth Height Cat. No.

410 550 mm 500 mm 86 mm 805.85.221

550 690 mm 805.85.222

690 830 mm 805.85.223

830 970 mm 805.85.224890 1,100 mm 805.85.225

Width Depth Height Cat. No.

330 mm 505 mm 150 mm 805.83.205

410 mm 805.83.201

490 mm 805.83.202

730 mm 805.83.203


330 mm 505 mm 90 mm 805.83.220

410 mm 805.83.221

490 mm 805.83.222

730 mm 805.83.223


Wardrobe Fittings, pull-out storage system


11/50

Dimensions in mm



Dimensionaldata

notbinding.


FF 6.11

6




Material: Plastic Finish: Transparent

Area of application: For placing into wire basket or wire shelf

Version: With tufted mat

Basket liner


Material: Plastic

Finish: Transparent

Object tray

Tray basket


Material: Steel


Packing: 1 piece

Packing: 1 piece

Packing: 1 piece

Packing: 1 piece

Shoe rack


300 mm 465 mm 5 mm 805.83.491

380 mm 805.83.492

460 mm 805.83.493

700 mm 805.83.494


100 mm 440 520 mm 40 mm 807.49.390


240 mm 525 mm 85 mm 805.83.481

320 mm 805.83.482

400 mm 805.83.483

480 mm 805.83.484


390 mm 505 mm 200 mm 805.84.201

470 mm 805.84.202

Installation

Width 560 1,000 mm, continuously adjustable

Packing: 1 piece

Material: Rail: Steel,supports: Plastic

Colour: Rail: Aluminium coloured or black,plastic parts: Black or grey

Installation: For installation in shoe cupboards Version: Continuously adjustable Fixing material supplied

Colour Cat. No.

Rail: Aluminium coloured

Plastic parts: Grey

892.11.901

Rail: BlackPlastic parts: Black 892.11.300


12/50

Dimensionaldata

notbinding.


Dimensions in mm



6

Installation: For mounting to the side panel


Version: Extending


Version: Extending for 13 ties


Pull-out rail for trousers

Pull-out tie and belt rack

Pull-out shoe rack unit

Packing: 1 piece

Packing: 1 piece

Packing: 1 piece

Packing: 1 piece

Pull-out storage unit


260 mm 536 mm 231 mm 807.47.210


145 mm 499 mm 98 mm 807.46.220

Tiers Width Depth Height Cat. No.

2 306 mm 504 mm 600 mm 805.81.251

3 790 mm 805.81.252

Tiers Width Depth Height Cat. No.

2 306 mm 505 mm 600 mm 805.81.241

3 790 mm 805.81.242




13/50

Dimensions in mm



Dimensionaldata

notbinding.


FF 6.13

6

Pull out wardrobe rail

Pull out clothes holder

Swing out hinge

Spacer

Under shelf mounting plate

Packing: 1 piece

Packing: 1 piece

Packing: 1 piece

Packing: 1 piece

Packing: 1 piece


85 mm 500 mm 175 mm 807.45.220

Version: Extending



506 mm 160 mm 365 mm 805.79.220

Version: Extending with swivelling with trays



190 mm 30 mm 90 mm 805.78.022

Area of application: For pull out tie and belt rack and

pull out for trousers


85 mm 151 mm 13 mm 805.78.032

163mm 27 mm 805.78.033


60 mm 270 mm 116 mm 805.78.002

Area of application: To compensate for door offset

Area of application: For mounting underneath shelves.

For pull out frame




14/50

Dimensionaldata

notbinding.


Dimensions in mm



6

Stackable, with eyes

Packing: 1 piece

Material: Steel Installation: For screw fixing


White Whitealuminium,RAL 9006

320 x 220 x 350 540.07.722 540.07.222

390 x 240 x 650 540.07.723 540.07.223

Collapsible

Supplied with

1 Laundry basket with fixing material

Packing: 1 piece

Material: Steel Finish/colour: Plastic coated, white Version: With feet and 2 suspension eyes


Cat. No.

330 x 255 x 360 540.08.721

330 x 255 x 640 540.08.722

Folds up to a small size

with little storage space requirement

Clothes Basket


Wardrobe Fittings, storage system


15/50

Dimensions in mm



Dimensionaldata

notbinding.


FF 6.15

6

Wardrobe liftFor mounting to side panel,

load bearing capacity 15 kg

Wardrobe liftFor mounting to side panel,

load bearing capacity 15 kg, electric with remote control

Area of application: For internal cabinet width of

870 1,190 mm

Material: Arm and clothes rail: Steel,

housing and connecting parts: Plastic

Finish: Arm and clothes rail: Nickel plated Colour: housing and connecting parts: Black

Installation: For screw xing to side panel into 32

mm series drilled holes

Clothes rail: 28 mm



830 1,200 mm


housing and connecting parts: Plastic

Finish: Arm and clothes rail: Nickel plated Colour: housing and connecting parts: Grey

Installation: For screw xing to side panel into 32

mm series drilled holes

Clothes rail: 22.4 mm

Up to 6 lifts can be operated with one remote control

Packing: 1 set Packing: 1 set

Note

Recommended load min. 5 kg for smoother movement.Increasing the load, reduces the pull force.

Load bearing capacity kg Cat. No.

15 805.24.330

Load bearing capacity kg Cat. No.

15 805.20.565


Wardrobe Fittings, wardrobe lifts


16/50

Dimensionaldata

notbinding.


Dimensions in mm



6

240

340

810

907

Finish

Arm, clothes rail, pull rod

Color Housing,

connecting parts

Cat. No.

For internal wardrobe width 450 - 600 mm

White aluminum Grey 805.20.515

Nickel plated Black 805.20.314

Nickel plated White 805.20.714

Black Black 805.20.414

For internal wardrobe width 600 - 830 mm

White aluminum Grey 805.20.542

Nickel plated Black 805.20.341



For internal wardrobe width 830 - 1,200 mm

White aluminum Grey 805.20.507Nickel plated Black 805.20.305



Colour Cat. No.

Grey 805.20.405

Black 805.20.378

White 805.20.778

2000 Wardrobe liftLoad capacity 10 kg

Fixing to side panel or NEW BASIC wardrobe system


Steel

nickel plated

Steel and plastic

white aluminum

Black steel

and plastic

Plastic grey Plastic white

Area of application: For internal wardrobe width 450 - 1,200 mm

or for side components of NEW BASIC

wardrobe system

Load capacity: minimum 1.6 kg

Material: Steel arm, clothes rail and pull rod, plastic

housing and connecting parts

Installation: Screw xing to side panel or sliding into NEW

BASIC side component

Note

Installation in rear row of

holes

Tilting device

Only use tilting device if the

wardrobe lift is fitted in the

rear row of holes

Packing: 2 pieces

Spacer frameFor 2000 wardrobe lift

Area of application: Compensating for door offset. e.g. with inset

doors

Distance 20 mm, stackable

Material: Plastic

Packing: 1 set

Installation in centre of wardrobes

side panel



830-1200

600-830

450-600810

30 30

907

140

520


17/50

Dimensions in mm



Dimensionaldata

notbinding.


FF 6.17

6

Wardrobe liftFixing to side panel,

load bearing capacity 12.5 and 18 kg

Installation

Area of application: For internal wardrobe width 800 - 1,100 mm

Material: Steel arm, clothes rail and pull rod, plastic

housing, screw-on and connecting parts

Finish: Arm, clothes rail and pull rod white aluminum,

housing, screw-on and connecting parts grey. Version: Adjusting mechanism for adapting to the ward

robe width

Installation: Screw xing to side panel in 32 mm series

drilled holes with 450 to 480 mm distance

between the rows of vertical holes


Version Load capacity Cat. No.

Super Wardrobe lift 12.5 kg 805.24.950

Super Pro Wardrobe lift 18 kg 805.24.960

Packing: 1 set




18/50

Dimensionaldata

notbinding.


Dimensions in mm



6

Wardrobe liftFor mounting to side panel or

New Basic wardrobe system or

Logo shelf system

2004 Wardrobe liftLoad bearing capacity 10 kg

Installation in centre of wardrobe

side panel

Note

Only use tilting device if the

wardrobe lift is fitted in the rear

row of holes.

Tilting device

Installation in rear row of holes


440 - 1200 mm or for side

components of New Basic wardrobe

system or Logo shelf system

Load bearing capacity: min. 1.6 kg, max. 10 kg

Material: Arm and clothes rail: Steel,Pull rod, housing and connecting

parts: Plastic

Installation: For screw xing to side panel with

New Basic wardrobe system or

Logo shelf system


Packing: 1 set

Finish/colour Cat. No.

For internal cabinet width of 600 - 1000 mm

Aluminium coloured/grey 805.20.532

Nickel plated/black 805.20.331

Nickel plated/white 805.20.731

Black 805.20.431

For internal cabinet width of 770 - 1200 mm



Nickel plated/white 805.20.755

Black 805.20.455




19/50

Dimensions in mm



Dimensionaldata

notbinding.


FF 6.19

6



Spacer frameFor 2004 wardrobe lift

Area of application: To compensate for door offset,

e.g. with inset doors

Distance: 20 mm, stackable

Material: Plastic


Packing: 2 pieces

Wardrobe lift InnominatoFor side panel mounting

Load bearing capacity 8 kg


screw-on plate, housing,

connecting parts and pull rod: Plastic

Adjustment facility: Clothes rail 620 950 mm

Packing: 1 piece




Colour Cat. No.

Grey 805.20.579Black 805.20.378

White 805.20.778


20/50

Dimensionaldata

notbinding.


Dimensions in mm



6

Getting the best from your bedroom.

Material: Steel

Colour: Black

Mattress support: Wooden slats

Version: Adjustable arm rest

Sofa bed with foldable brackets

Packing: 1 piece

Dimension (W x D) Cat. No.

192 x 130 mm 272.00.273


Bedroom Fittings, bed frame ttings


21/50

Dimensions in mm



Dimensionaldata

notbinding.


FF 6.21

6

Material: Steel

Colour: Black

Mattress support: Wooden slats

Version: Adjustable armrest

Divan sofa bed frame

Material: Steel

Colour: Black

Bed support: Polypropylene deck

Installation height: 120 mm from the floor

Sofa bed frame, 3 folds

Note:

Mattressnot included

Packing: 1 piece

Packing: 1 piece

Dimension (W x D) Cat. No.

130/198 x 80 mm 272.00.173

Dim. (L x W) Mattress Cat. No.

Length Width Thickness1,900 x 1,400 mm 1,830 mm 1,330 mm 60 mm 272.00.010




22/50

Dimensionaldata

notbinding.


Dimensions in mm



6



For max. bed size Cat. No.

1,000 x 2,000 mm 274.50.915

Swing-away for end opening couches and beds with bedding boxes

SWING for side opening beds and beds with bedding boxes

Area of application: For end opening couches and beds with

bedding boxes

Material: Steel

Swing-away spring loaded fitting

Finish: Galvanized

Version: With 2 removable tension springs

Packing: 1 set

For max. bed size Cat. No.

1,000 x 2,000 mm 274.50.924

Finish: Galvanized

Version: With 4 removable tension springs

Packing: 1 set

Installation

Screw fixing with raised head

bolts for through-hole installation

Bedding box

Lying area

Bedding box

Lying area

Information

Since the fitting swings upwards inside the bedding box,no additional space is required.

Information

Using the values in brackets reduces the amount of force that is

required when opening.

Since the fitting swings upwards inside the bedding box,

no additional space is required.


23/50

Dimensions in mm



Dimensionaldata

notbinding.


FF 6.23

6



Max. installation height Cat. No.

375 mm 274.01.930


300 mm 274.00.933


300 mm 274.07.710

Area of application: For slatted frames, couches and French beds

Material: Steel

Finish: Plastic coated, white or yellow chromatized

Installation height: Max. 300 375 mm

Version:W

ith mounting plates

Scissor jacks

Engaging positions of scissor jacks for

adjustable head and foot sections of

slatted frames, couches or French beds,

as well as in other application areas.

In 13 stages

In 18 stages

In 18 stages




Finish: White plastic coated

Finish:Yellow chromatized

Finish:Yellow chromatized


24/50

Dimensionaldata

notbinding.


Dimensions in mm




FF 6.24

6



Tavoletto Combi fittingFor beds with width of 900/1400 mm

Supplied with

1 Fitting set complete for 1 piece of furniture, without fixing material

1 Set of installation instructions

Packing: 1 set

Order reference

All foldaway beds must be prevented from tipping in accordance with

EN1129. To do this, the securing bracket 271.98.100 must be used.

Desk position Parallel upward and downward sliding of the

worktop

Bed position

Fitting for one side

Technical data

Desk position Bed position

For deks/bed

(W x L)

Width B

mm

Height H

mm

Depth

T

mm

Shear force

N

900 x 2000 mm 1050 >1447 650 1100

1400 x 2000 mm 1503 >1777 825 1200

Material: Steel Finish/colour: Lacquered, Black Installat ion: In accordance with the given furniture

structure (CAD data) Safety tested by the LGA in compliance with DIN EN 1129

Suitable for Cat. No.

Desk/bed 900 x 2000 mm (W x L) 271.97.300

Desk/bed 1400 x 2000 mm (W x L) 271.97.301


25/50

Dimensions in mm



Dimensionaldata

notbinding.



FF 6.25

6

Bettlift Built-in foldaway bedWith slatted frame and adjustable head section

Hardness degree regulation

Resilient wooden slat pockets

Standard height: 2100 mm

Standard lying area: 2000 mm

Area of application: For inset front

Material: Frame: Torsion-free tubular steel,

slatted frame: Laminated wood,

caps: Rubber

Finish: Slatted frame: Natural wood

Colour: Frame: Graphite black, RAL 9011,

foot linkage: White aluminium, RAL

9006

Version: With gas lled strut for easy opening

and closing, with integrated automatic

foot mechanism and mattress retainer,

frame with adjustable head and foot

section and 28 resilient wooden slats,

wooden slats in exible pockets with

cushioning support, with shoulder

comfort zone, 5 double slats for

central zone reinforcement and

centre strap, continuously adjustable

hardness degree

Installation: Quick xing system, bearing plates,

gas filled strut, pre-installed foot

linkage, note installation drawing and

installation instructions,ensure that the surface is suitable for

attaching the securing brackets,

secure foldaway beds with provided

securing brackets to prevent tipping,

use material that is at least 19 mm

thick for cabinet construction

With LGA quality certicate

Supplied with

1 BETTLIFT built-in foldaway bed

2 Securing brackets

3 Bedding straps


Note

All foldaway beds must be prevented from

tipping in accordance with EN1129.

2 Securing brackets are provided in

each fitting set.

Bed weight

The gas filled struts are designed for the specified bed weight.

The bed weight is calculated from the front panel, the mattress,

the bedding and the bed border, if applicable.

Order reference

Please indicate when ordering if the bed weight differs from

the specified weight.

Automatic foot mechanism

Angular feet automatically come out when the bed is opened and

are retracted when the bed is closed again.


Bedroom Fittings, foldaway bed ttings


26/50

Dimensionaldata

notbinding.


Dimensions in mm




FF 6.26

6


Bedroom Fittings, foldaway bed ttings

End mounted single (or double) bed

Packing: 1 set

Order reference

Order 2 single beds and 1 centre support for double bed.

Centre support

Packing: 1 piece

Side mounted single bed

Packing: 1 set

French bed

Packing: 1 set

The specified cabinet dimensions are internal cabinet dimensions

Area of application: Lying area: 900 x 2,000 mm (W x L),bed weight: 44 - 55 kg

Version Cat. No.

Single bed without mattress 271.91.114

Single bed with Hyperflex mattress 271.91.115

Area of application: For connecting two single beds tomake a double bed

Material: Steel


Powder coated, Graphite black, RAL 9011 271.87.101


Area of application: Lying area: 900 x 2,000 mm (W x L),bed weight: 44 - 55 kg

Version Cat. No.

Without mattress 271.91.145

With Hyperflex mattress 271.91.146


Area of application: Lying area: 1,400 x 2,000 mm (W x L),bed weight: 60 - 80 kg

Version Cat. No.


With mattress 271.91.136


27/50

Dimensions in mm



Dimensionaldata

notbinding.



FF 6.27

6



Bettlift Built-in foldaway bedWith electric drive and slatted frame with adjustable

head section

Supplied with

1 Bettlift built-in foldaway bed with electric drive

2 Securing brackets3 Bedding straps

1 Infrared remote control with battery (mains supply clearing)


Bed weight

The bed weight is calculated from the total weight of the front panel,

the mattress, the bedding and the bed border, if applicable.

The electric motor drive is designed for a maximum bed weight

End mounted single bed

Packing: 1 set

Electric motor drive for Bettlift

Operated using infrared remote control

Area of application: For inset front Material: Frame: Torsion-free tubular steel,

slatted frame: Laminated wood,

caps: Rubber Finish: Slatted frame: Natural wood Colour: Frame: Graphite black, RAL 9011,

foot linkage: White aluminium, RAL 9006 Version: Opening/closing using electric drive

via infrared remote control, integratedautomatic foot mechanism,mattress retainer and slatted frame,slatted frame with 28 resilient woodenslats, adjustable head section,with shoulder comfort zone,resilient wooden slats mounted in flexiblepockets with cushioning support,5 double slats for central zonereinforcement and centre strap,hardness degree continuously adjustable

Installation: Quick fix ing system; bearing plates,

electric motor drive, pre-installedautomatic foot mechanism,note installation drawing andinstallation instructions,use material that is at least 19 mmthick for cabinet construction,secure foldaway beds with securingbrackets to prevent tipping,ensure that the surface is suitable forattaching the securing brackets

Nominal voltage: 24V With LGA quality certificate


Area ofapplication: Lying area: 900 x 2,000 mm (W x L),bed weight: max. 60 kg

Version Cat. No.


With Hyperflex mattress 271.91.214

Standard height: 2100 mm

Standard lying area: 2000 mm

Electric drive


28/50

Dimensionaldata

notbinding.


Dimensions in mm




FF 6.28

6



Securing bracketFor Bettlift built-in foldaway bed

Supplied with

2 Securing brackets

Fixing material

Note

Packing: 2 pieces

Angular foot

Function

The angular feet must be pulled-out when the bed is opened,

turned by 90 and pushed back in again until the stop is reached.

Installation Screw fixing plate of angular foot to foot side of bed frame and

rear side of front panel.

Asquare beam measuring at least 40 x 40 mm is needed on all

four sides as slatted frame support.

Packing: 1 pair

Bedding strap

Packing: 1 set

Area of application: To prevent cabinet of foldaway beds fromtipping

Material: Steel Installation: For screw fixing

All foldaway beds must be prevented from

tipping in accordance with EN1129.

2 Securing brackets are provided in each

fitting set.

Finish/colour Cat. No.Powder coated, Anthracite coloured 271.98.100

Area of application: Supporting the open bed Material: Steel Finish: Powder coated Version: With fixing plate Diameter: Rail: 20 mm

Colour Cat. No.

Mounting plate: Black, RAL 9011

Angular bracket: White aluminium, RAL 9006

271.95.361

Area of application: For holding bedding when closing bed

Cat. No.

For bed widths up to 900 mm 271.87.920

For bed widths up to 1,200 mm 271.87.921For bed widths up to 1,400 mm 271.87.922


29/50

Dimensions in mm



Dimensionaldata

notbinding.


FF 6.29

6

Plasma Mini Lift

Installed to lower down the TV Installed to lift up the TV

Area of application: Used in cabinets raising and lowering

at screen television, Max. 30

Material: Steel

Finish: Silver (RAL 9006)

Mounting method: Suitable for below VESA standards

50 x 50

75 x 75 100 x 100

200 x 100

200 x 200

Height of mechanism: 645 mm (closed) to 1,105 mm (open)

Stroke: 460 mm

Weight capacity: 50 kg

Speed: 25mm/second

Installation depth: 70 mm

Supplied with: Radio frequency remote control

Cat. No.

Mini-Lift at screen lift 421.68.421

Cat. No.

Mini-Lift mounting bracket 421.68.431

Packing: 1 set

Packing: 1 piece


TV and Hi-Fi Fittings, lift systems


30/50

Dimensionaldata

notbinding.


Dimensions in mm



6


TV and Hi-Fi Fittings, lift systems

Maxi Lift Electronic Plasma Lift

Area of application: Used in cabinets for raising and

lowering flat screen television

Material: Steel Finish: Black

Mounting method: Suitable for below VESA standards 400 x 100

400 x 400

600 x 200

600 x 400

Height of mechanism: 715 mm (closed) to 1465

mm (open)

Stroke: 750 mm

Weight capacity: 100 kg

Speed: 28 mm / second

Cat. No.

Maxi Lift Electronic Plasma Lift 421.68.420

Front Side

Packing: 1 set

RF Module Remote

Power supply

Supplied with: Lift Unit

Mounting Brackets

Rocker Switch

RF Module

Remote Controller

Power Supply


31/50

Dimensions in mm



Dimensionaldata

notbinding.


FF 6.31

6


TV and Hi-Fi Fittings, wall & ceiling support brackets

TV Wall support brackets

Fixed version

Area of application: Wall mount xing for LCD/TFT

Material: Steel powder coated

Finish: Black Lines

Installation: Screw xing into wall

Suitable for TV sizes: 12-26

According to VESA:: 100x100, 200x100

Features: Safety lock, Lock release,

Shock absorbing

Load bearing capacity Cat. No.

30 kg 817.24.900


75 kg 817.24.910


Area of application: Wall mount xing for LCD/PLASMA/LED


Finish: Black Lines



According to VESA: 100x100mm to up

Features: Safety lock, Lock release, Shock absorbing


32/50

Dimensionaldata

notbinding.


Dimensions in mm



6

Tilt & Swivel version


Area of application: Wall mount xing for LCD/TFT/LED


Finish: Black Lines

Installation: Screw xing into wallSuitable for TV sizes: 26-42

According to VESA: 100x100, 200x100, 200x200

Features: Safety lock, Lock release,

Shock absorbing


35 kg 817.24.920


35 kg 817.24.930

Area of application: Wall mount xing for LCD/TFT/LED


Finish: Black Lines



According to VESA: 100x100, 200x100, 200x200


Packing: 1 set

Packing: 1 set




33/50

Dimensions in mm



Dimensionaldata

notbinding.


FF 6.33

6



75 kg 817.24.940


80 kg 817.24.941

Packing: 1 set

Packing: 1 set

Tilt & Slide version



Finish: Black Lines



According to VESA: 100-600mm x 100-400mm




Finish: Black Lines








34/50

Dimensionaldata

notbinding.


Dimensions in mm



6

Tilt & Slide & Swivel version




Finish: Black LinesInstallation: Screw xing into wall




Area of application: Ceiling mount or under shelves xing for

LCD/PLASMA/LED

Material: Steel powder coatedFinish: Black Lines





Tilt & Slide version for ceiling mount or under

shelves


60 kg 817.24.950


60 kg 817.26.900





35/50

Dimensions in mm



Dimensionaldata

notbinding.


FF 6.35

6 Area of application: For plasma TV from 30 - 63

Material: Steel

Installation: For screw fixing to wall

Material: Steel

Installation: Screw fixing on ceiling

Ceiling holder for projectors, load bearing capacity 15 kg

Wall support brackets for plasma TV, load capacity 75 kg

Finish Cat. No.

Plastic coated silver coloured 818.91.820

Finish Cat. No.

Plastic coated silver coloured 818.92.940

Packing: 1 set

Packing: 1 piece




36/50

Dimensionaldata

notbinding.


Dimensions in mm



6


Furniture Turntables

Turntable 90 rotation to right and leftLoad bearing capacity 100 kg

Turntable, rotates through 350Load bearing capacity 100 kg


Packing: 1 piece

Material: Steel Finish: Bright Version: Rotating mechanism:

Returned to original position by steel spring,ball cage assembly: Ball bearing mounted

Installation: To relieve springs, plea se install additionalstops.

Dimensions (L x W x H) Cat. No.mm

170 x 170 x 27 646.15.023

Material: Aluminium gravity die casting Finish: Bright Version: Ball cage assembly: Friction bearing mounted,

with stop and 86 mm opening forleading cables through, for example

Diameter

mm

Height

mm

Cat. No.

185 28 646.17.009

Turntable, rotates through 360With rollers, load bearing capacity 50 kg

Turntable

Roller

Turntable, rotates through 360Load bearing capacity 100 kg



Packing: 1 piece

Material: Turntable: Steel Finish: Galvanized turntable Colour: Rollers: Black Version: Ball cage assembly: Ball bearing mounted

Dimensions (L x W x H)mm

Cat. No.

57 x 57 x 11 646.12.102

Diametermm

Heightmm

Cat. No.

26 13 646.11.016

Version: Ball cage assembly: Ball bearing androller bearing mounted

Material: Plastic Colour: Black

Diametermm Heightmm Cat. No.

290.0 6.5 646.30.300


37/50

Dimensions in mm



Dimensionaldata

notbinding.


FF 6.37

6


Ladders

Stainless steel sliding ladder

Note

The ladder is braked at the top and bottom under load.

The sliding ladder is protected against unintentional unhooking.

The sliding ladder is also available without steps. Please ask for dimensioned drawing.

So that your own choice of steps can be individually adapted to the shelf's finish.

Ladder

Area of application: For library, hotel and residential areas Material: Frame, handrail and step holders: Stainless steel,

steps: Birch or beech veneer plywood

Finish: Frame matt brushed,steps clear lacquered Version: Hook-in element with three castors Installation: For hooking-in Thickness: Steps: 24 mm Rise 240 mm Load bearing capacity up to approx. 150 kg

Hook-in height

mm

Clearance

mm

Number of steps Cat. No.

Without steps

2000 2240 800 819.18.001

2250 2490 880 819.18.002

2500 2740 950 819.18.003

2750 2990 1030 819.18.004

3000 3250 1100 819.18.005

With steps, beech

2000 2240 800 8 819.18.031

2250 2490 880 9 819.18.032

2500 2740 950 10 819.18.033

2750 2990 1030 11 819.18.034

3000 3250 1100 12 819.18.035


38/50

Dimensionaldata

notbinding.


Dimensions in mm



6


Ladders

Hook-in track

Track holder

Stop

Packing: 1 piece

Order reference

Please specify the exact hook-in height as well as the catalogue number when ordering.

Packing: 1 m

Order reference

Please specify fixed length and po sition of track holders as

well as catalogue number when ordering. We recommend to

provide a drawing.

The maximum hook-in track length is 3,000 mm.

For lengths of more than 3,000 mm the hook-in tracks are

connected using the provided locating pin.

Note

Distance of track holders max. 800 mm

Packing: 1 piece

Packing: 1 piece

Hook-in height

mm

Clearance

mm

Number of steps Cat. No.

With steps, birch

2000 2240 800 8 819.18.081

2250 2490 880 9 819.18.082

2500 2740 950 10 819.18.083

2750 2990 1030 11 819.18.084

3000 3250 1100 12 819.18.085

Material: Stainless steel

Finish Cat. No.Matt brushed 819.17.099

Material: Stainless steel Installation: For screw fixing to intermediate/top shelf

and to centre/side panel

Finish Cat. No.


Material: Stainless steel Installation: For plug fitting and screw fixing

Finish Cat. No.



39/50

Dimensions in mm



Dimensionaldata

notbinding.


FF 6.39

6


Ladders

Hooks

Hook-in ladder

Dimension X (extension over top edge of hook-in tube)

In retracted position = 130 mm

In withdrawn position = 20 mm

Hook-in height = dimension floor to centre of tube holder + 22 mm

Area of application: For warehouse, workshop, hospital and laboratory areas

Material: Frame: Aluminium,

steps: Multiplex birch

Finish: Frame: Plastic coated white aluminium, RAL 9006,

steps: Natural lacquered

Width: 400 mm, with hook-in heights 3,000 3,250 mm: 450 mm

Version: With hooks to prevent toppling Installation: For hooking-in

Note

The hooks allow the sliding ladder being propped vertically against the shelf without the need of unhooking.

Hook-in ladder is s imply hooked on and off.

Hook-in height

mm

Clearance

mm

Number of steps Weight

kg

Cat. No.

2000 2240 approx. 600 7 13 819.14.212

2250 2490 approx. 650 8 16 819.14.221

2500 2740 approx. 700 9 18 819.14.230

2750 2990 approx. 750 10 21 819.14.249

3000 3250 approx. 800 11 23 819.14.258

Order reference


On request available:

Hook-in ladder with plastic coated frame in other RAL colours

Steps with non-slip, ribbed rubber coating available against extra charge (grey/black)

Multiplex beech steps

Solid wood steps type of wood as required

Glass steps Handrail (on one side/on both s ides)

Other hook-in heights


40/50

Dimensionaldata

notbinding.


Dimensions in mm



6


Ladders

Hook-in tube

Dimension A

mm

Cat. No.

2000 819.15.020

3000 819.15.030

Fixed length (max. 3,000 mm) 819.15.099


Finish: Matt brushed

Version: Without drill holes

Order reference

When ordering xed lengths, please specify the required

length as well as the catalogue number, max. 3 m per piece.




Installation Cat. No.

For mounting in drilled hole 11 mm 819.15.080

Note

Tube holder suitable for panel thickness of at least 19 mm.

Mount tube holders at approximately 800 mm intervals.

Packing: 1 piece

Tube holder

Connection piece

Material: Solid beech


For inserting into running tube 819.15.067

Packing: 1 piece

Packing: 1 piece

Cover cap

Material Finish/ colour Cat. No.

Plastic Black 819.15.374

Stainless steel Matt brushed 819.15.074

Installation: For inserting into running tube


41/50

Dimensions in mm



Dimensionaldata

notbinding.


FF 6.41

6


Ladders

Sliding ladder

Dimension x (extension over top edge of running tube)

In retracted position = 230 mm

In withdrawn position = 80 mm

Hook-in height = dimension floor to centre of tube holder + 22 mm

Area of application: For warehouse, workshop, hospital and laboratory areas

Material: Frame: Aluminium,

steps: Multiplex birch

Finish: Frame: Powder coated white aluminium, RAL 9006,

steps: Natural lacquered

Width: 400 mm, with hook-in heights 3,000 3,250 mm: 450 mm

Version: With top and bottom guide using plastic mounted rollers Installation: For hooking onto running tube with rollers

Note

The ladder can be propped vertically against the shelf without theneed of unhooking due to the automatically sliding-in top roller fitting.

The bottom castors brake automatically under load.

The sliding ladder is protected against unintentional unhooking.

Hook-in height

mm

Clearance

mm

Number of steps Weight

kg

Cat. No.

2000 2240 540 600 7 18 819.12.281

2250 2490 600 660 8 20 819.12.282

2500 2740 660 720 9 22 819.12.283

2750 2990 720 770 10 24 819.12.284

3000 3250 770 830 11 26 819.12.285

Packing: 1 piece

Order reference


On request available:

Sliding ladder with powder coated frame in other RAL colours

Steps with non-slip, ribbed rubber coating available against extra charge (grey/black)

Multiplex beech steps

Solid wood steps type of wood as required

Glass steps

Handrail (on one side/on both sides)

Other hook-in heights

Top roller fitting Bottom castors


42/50

Dimensionaldata

notbinding.


Dimensions in mm



6


Ladders

Hook-in tube

Dimension A

mm

Cat. No.

2000 819.15.020

3000 819.15.030

Fixed length (max. 3,000 mm) 819.15.099



Version: Without drill holes

Order reference

When ordering xed lengths, please specify the required

length as well as the catalogue number, max. 3 m per piece.

Connection piece

Material: Solid beech


For inserting into running tube 819.15.067

Packing: 1 piece

Packing: 1 piece



Version: With grub screw for xing


Installation Cat. No

For attaching to hook-in tube 819.15.050

Stop





For mounting in drilled hole 11 mm 819.15.080

Note

Tube holder suitable for panel thickness of at least 19 mm.

Mount tube holders at approximately 800 mm intervals.

Packing: 1 piece

Tube holder


43/50

Dimensions in mm



Dimensionaldata

notbinding.


FF 6.43

6

Information

Logo Shelf System

The Logo system is suitable for designing living areas, offices, wardrobes, dining rooms, etc. in an attractive and ideal way

Easy assembly and installation

Flexible configuration options using variably positioned support elements and adapters The use of different materials such as aluminium, wood or glass create variable design options

The column profiles of the shelf system can be mounted in four different ways:

Configuration options

Single column profile, mounted

between ceiling and floor

Wall mounted with

horizontal support

Single column profile,

mounted to sloping ceiling

Three column profiles assembled into a

frame


44/50

Dimensionaldata

notbinding.


Dimensions in mm



6

Information

Logo Shelf System

Cabinets, panels and shelves can be installed between the column profiles.

Configuration with aluminium shelves

Installation of cabinets Installation of wooden and glass shelves

Installation of aluminium shelves

A

B

C

D

E

F/G

Wardrobe rail length =

profile distance 12

Glass shelf width =

profile distance 1

Wooden shelf width =

profile distance 1

Aluminium shelf width =

profile distance 72

Cabinet width =

profile distance 1

Profile length = room height 98

with adjusting foot with plate

Profile length = room height 90

with adjusting foot without plate

Support elements Angled aluminium shelves Straight aluminium shelves Removable shelves with wooden

or glass inserts

Depth 180 mm Depth 180 mm Depth 180 mm

Depth 340 mm Depth 340 mm Depth 340 mm Depth 340 mm

Depth 500 mm Depth 500 mm Depth 500 mm Depth 500 mm


45/50

Dimensions in mm



Dimensionaldata

notbinding.


FF 6.45

6

Information

Logo Shelf System

Column profile

InteriorFitting SystemsShelf SystemsLogo Shelf systemPrices Availability OrderingPlanning and Construction

Cover profile for column profile

Mitre-joint connector

Ceiling and side connection

Packing: 1 piece

Order reference

mitre cut.

Packing: 1 piece

Supplied with

1 Mitre joint connector

Fixing material

Packing: 1 piece

Installation

Packing: 1 piece

Installation

Material: Aluminium Finish: Silver coloured anodized Version: With groove for fixing Supports

and adapters

Length mm Cat. No.

3,000 814.00.930

Area of application: For covering the groove on therear side of the column profile

Material: Plastic Colour: Grey

Length mm Cat. No.

3,000 814.01.908

Area of application: For connecting the column profilewhen wall mounted or framemounted

Material: Aluminium Finish: Bright

Cat. No.

814.01.920

Material: Zinc alloy Finish/colour: Plastic coated, silver coloured

Cat. No.Ceiling and side connection 814.01.900


46/50

Dimensionaldata

notbinding.


Dimensions in mm



6

Ceiling connection for sloping ceilings

Adjusting foot

Plate

For adjusting foot

Packing: 1 piece

Supplied with

1 Adjusting foot

1 Rubber disk, self adhesive

Fixing material

Packing: 1 piece

Supplied with

1 Plate

1 Rubber disk, self adhesive

Fixing material

Packing: 1 piece

90 90 26

56

36

28

58

58

4.

5


Cat. No.

Ceiling connection for sloping ceilings 814.01.901

Area ofapplication:

For adjusting height of columnprofiles by approx. 30 mm


Cat. No.

Adjusting foot 814.01.910


Cat. No.

Plate 814.01.911

Information

Logo Shelf System


47/50

Dimensions in mm



Dimensionaldata

notbinding.


FF 6.47

6

Information

Logo Shelf System


Support elements

For aluminium shelves, aluminium/glass shelves and aluminium/wood shelves

For cabinets, wooden shelves and glass shelves

Clamping pieceFor glass shelves

Material: Zinc alloy Finish/colour: Plastic coated, silver coloured Installation: For clamping in column profile

Supplied with

1 Support element

Fixing material

Packing: 1 piece

Load bearing capacity: 20 kg Adjusting facility: At 30 intervals

For shelf depth Cat. No.mm

180 814.01.931

340 814.01.932

500 814.01.933

Supplied with

1 Support element

Fixing material

Packing: 1 piece

Load bearing capacity: 50 kg Adjusting facility: At 30 intervals

Cat. No.

Support element 814.01.930

Supplied with

1 Clamping piece

2 Glass buffers for inserting into the shelf support

Fixing material

Packing: 1 piece


Cat. No.Clamping piece 814.01.980


48/50

Dimensionaldata

notbinding.


Dimensions in mm



6

Information

Logo Shelf System

For fixing to cabinet at top

Clamping element

For small, light cabinets

Support element

Load bearing capacity up to 100 kg

Adapter

For tie, belt, scarf, trouser and skirt rack

Packing: 1 piece

4.5


Cat. No.

Clamping element 814.01.981

Installation instructionsMount support element for cab inet to required height

before inserting the cabinet since adjustment

afterwards is not possible.

Supplied with

1Support element

M6 screws with countersunk head for fixing to cabin

Packing: 1 piece

Order reference

2 supports for cabinets, wooden and glass shelves

and 2 clamping elements or support elements are

required for each cabinet.

Load bearingcapacity:

100 kg (in combination withsupport for cabinets, wood orglass shelves)

Cat. No.

Support element 814.01.940

Material: Aluminium Finish/colour: Plastic coated, silver coloured Installation: For clamping in column profile

Packing: 1 piece

Cat. No.

Adapter for tie, belt, scarf, trouser and

skirt rack

814.01.960


49/50

Dimensions in mm



Dimensionaldata

notbinding.


FF 6.49

6

Information

Logo Shelf System

For wardrobe lifts, load bearing capacity 10 kg


Rail end support

Wardrobe rail

Packing: 1 piece

Supplied with

1 Rail end support

Fixing material

Packing: 1 piece

Packing: 1 piece

Cat. No.

Adapter for wardrobe lifts 814.01.970

15


Cat. No.

Rail end support 814.01.950

Material: Aluminium Finish: Silver coloured anodized

Length Cat. No.

1,000 mm 814.01.990


50/50

Dimensionaldata

notbinding.


Dimensions in mm


Prices Availability Ordering www.hafele.com

6

Download - Hafele Home Improvement Fittings

Top Related