Transcript
Page 1: EVK NINA W1/EVK NINA B2 - U-blox · EVK-NINA-W151 – Evaluation kit for NINA-W151 module, RF port available on U.FL connector (J21) EVK-NINA-W152 – Evaluation kit for NINA-W152

EVK-NINA-W1/EVK-NINA-B2 Evaluation kit for NINA-W1 and NINA-B2 modules User guide

Abstract

This document describes how to set up the EVK-NINA-W1/EVK-NINA-B2 evaluation kits to

evaluate NINA-W1 series and NINA-B2 series stand-alone modules. It also describes the different

options for debugging and the development capabilities included in the evaluation board.

www.u-blox.com

UBX-17011007 - R07

Page 2: EVK NINA W1/EVK NINA B2 - U-blox · EVK-NINA-W151 – Evaluation kit for NINA-W151 module, RF port available on U.FL connector (J21) EVK-NINA-W152 – Evaluation kit for NINA-W152

EVK-NINA-W1/EVK-NINA-B2 - User guide

UBX-17011007 - R07 Page 2 of 23

Document information Title EVK-NINA-W1/EVK-NINA-B2

Subtitle Evaluation kit for NINA-W1 and NINA-B2 modules

Document type User guide

Document number UBX-17011007

Revision and date R07 5-Sep-2019

Disclosure restriction

This document applies to the following products:

Product name Software version PCN reference

EVK-NINA-W101 N/A -

EVK-NINA-W102 N/A -

EVK-NINA-W131 N/A -

EVK-NINA-W132 N/A -

EVK-NINA-W151 N/A -

EVK-NINA-W152 N/A -

EVK-NINA-B221 N/A -

EVK-NINA-B222 N/A -

u-blox or third parties may hold intellectual property rights in the products, names, logos and designs included in this

document. Copying, reproduction, modification or disclosure to third parties of this document or any part thereof is only

permitted with the express written permission of u-blox.

The information contained herein is provided “as is” and u-blox assumes no liability for its use. No warranty, either express or

implied, is given, including but not limited to, with respect to the accuracy, correctness, reliability and fitness for a particular

purpose of the information. This document may be revised by u-blox at any time without notice. For the most recent

documents, visit www.u-blox.com.

Copyright © u-blox AG.

Page 3: EVK NINA W1/EVK NINA B2 - U-blox · EVK-NINA-W151 – Evaluation kit for NINA-W151 module, RF port available on U.FL connector (J21) EVK-NINA-W152 – Evaluation kit for NINA-W152

EVK-NINA-W1/EVK-NINA-B2 - User guide

UBX-17011007 - R07 Page 3 of 23

Contents Document information ................................................................................................................................ 2

Contents .......................................................................................................................................................... 3

1 Product description .............................................................................................................................. 4

1.1 Overview ........................................................................................................................................................ 4

1.2 Kit includes ................................................................................................................................................... 5

1.2.1 EVK-NINA-B221 and EVK-NINA-W1x1 .......................................................................................... 5

1.2.2 EVK-NINA-B222 and EVK-NINA-W1x2 .......................................................................................... 6

1.3 I/O allocation................................................................................................................................................. 6

1.4 Jumper description .................................................................................................................................... 7

1.4.1 Default jumper configuration ........................................................................................................... 9

1.4.2 RMII to PHY jumper configuration................................................................................................... 9

1.5 LEDs .............................................................................................................................................................10

1.5.1 RGB-LED jumper configuration .....................................................................................................10

1.6 Connectors .................................................................................................................................................11

1.7 Buttons ........................................................................................................................................................11

1.8 Configuration options ..............................................................................................................................12

1.8.1 Power supply ......................................................................................................................................12

2 Setting up the evaluation board ..................................................................................................... 13

2.1 EVK without software (open CPU) .........................................................................................................13

2.2 EVK with u-blox connectivity software .................................................................................................14

2.2.1 Starting up .........................................................................................................................................14

2.2.2 Getting the latest software ............................................................................................................14

Appendix ........................................................................................................................................................ 15

A Layouts.................................................................................................................................................... 15

B Schematic drawings ........................................................................................................................... 16

C Glossary .................................................................................................................................................. 21

Related documents .................................................................................................................................... 22

Revision history ........................................................................................................................................... 22

Contact .......................................................................................................................................................... 23

Page 4: EVK NINA W1/EVK NINA B2 - U-blox · EVK-NINA-W151 – Evaluation kit for NINA-W151 module, RF port available on U.FL connector (J21) EVK-NINA-W152 – Evaluation kit for NINA-W152

EVK-NINA-W1/EVK-NINA-B2 - User guide

UBX-17011007 - R07 Product description Page 4 of 23

1 Product description

1.1 Overview

The EVK-NINA-W1/EVK-NINA-B2 evaluation kit includes an evaluation board, which can be used as a

reference design for the NINA-W1 or NINA-B2 series modules, a quick start guide, and a USB cable.

For the NINA-B221 and the NINA-W1x1 module, the evaluation board is prepared with a U.FL coaxial

connector for connecting the external antenna. The NINA-B222 and the NINA-W1x2 modules have

an onboard antenna; thus the EVK-NINA-B222 and the EVK-NINA-W1x2 evaluation board does not

have a U.FL connector.

The main features of the EVK-NINA-W1/EVK-NINA-B2 are:

Available in several variants:

o NINA-B221 and NINA-B222

o NINA-W101 and NINA-W102

o NINA-W131 and NINA-W132

o NINA-W151 and NINA-W152

All of the module pins are available at connectors or jumpers

Can be powered through USB (J8) or external power supply (J23)

Equipped with a Quad High Speed USB to Multipurpose UART/MPSSE IC (FT4232) that allows

serial communication and flashing over USB.

The EVK-NINA-W1/EVK-NINA-B2 evaluation kits are available in the following variants, depending

on the NINA module that is mounted on the EVK:

EVK-NINA-B221 – Evaluation kit for NINA-B221 module, RF port available on U.FL connector

(J21)

EVK-NINA-B222 – Evaluation kit for NINA-B222 module with onboard antenna

EVK-NINA-W101 – Evaluation kit for NINA-W101 module, RF port available on U.FL connector

(J21)

EVK-NINA-W102 – Evaluation kit for NINA-W102 module with onboard antenna

EVK-NINA-W131 – Evaluation kit for NINA-W131 module, RF port available on U.FL connector

(J21)

EVK-NINA-W132 – Evaluation kit for NINA-W132 module with onboard antenna

EVK-NINA-W151 – Evaluation kit for NINA-W151 module, RF port available on U.FL connector

(J21)

EVK-NINA-W152 – Evaluation kit for NINA-W152 module with onboard antenna

This section describes the main connectors and settings that are required to get started. Figure 1

and Figure 2 show the two different antenna variants of the EVK-NINA-W1/EVK-NINA-B2 evaluation

board.

Page 5: EVK NINA W1/EVK NINA B2 - U-blox · EVK-NINA-W151 – Evaluation kit for NINA-W151 module, RF port available on U.FL connector (J21) EVK-NINA-W152 – Evaluation kit for NINA-W152

EVK-NINA-W1/EVK-NINA-B2 - User guide

UBX-17011007 - R07 Product description Page 5 of 23

Figure 1: EVK-NINA-W1/EVK-NINA-B2 evaluation board with U.FL connector for external antenna

Figure 2: EVK-NINA-W1/EVK-NINA-B2 evaluation board with internal antenna

⚠ Take care while handling the EVK-NINA-B222 and EVK-NINA-W1x2. Applying force to the NINA

module might damage the internal antenna.

1.2 Kit includes

1.2.1 EVK-NINA-B221 and EVK-NINA-W1x1

The EVK-NINA-B221 and EVK-NINA-W1x1 evaluation kits include the following:

EVK-NINA-B221 or EVK-NINA-W1x1 evaluation board

2.4 GHz foldable antenna (Ex-It 2400) with reverse polarity SMA connector

Page 6: EVK NINA W1/EVK NINA B2 - U-blox · EVK-NINA-W151 – Evaluation kit for NINA-W151 module, RF port available on U.FL connector (J21) EVK-NINA-W152 – Evaluation kit for NINA-W152

EVK-NINA-W1/EVK-NINA-B2 - User guide

UBX-17011007 - R07 Product description Page 6 of 23

RP-SMA - U.FL cable assembly, 100 mm length

USB cable

Quick Start guide

1.2.2 EVK-NINA-B222 and EVK-NINA-W1x2

The EVK-NINA-B222 and EVK-NINA-W1x2 evaluation kits include the following:

EVK-NINA-B222 and EVK-NINA-W1x2

USB cable

Quick Start guide

1.3 I/O allocation

The block diagram in Figure 3 provides a better understanding of how I/O signals from the module

are made available at connectors and/or interfaces of the EVK.

Sixteen (16) I/O signals are available at the middle row of the I/O allocator. These signals can be

distributed to connectors and/or interfaces on the EVK by use of jumpers to connect the associated

middle and outer row pin(s).

The signals IO-12, IO-13, IO-14 and IO-15 can be disconnected from the J4 connector by not

populating the corresponding jumpers at J18. This can be useful if the SDIO signals D2, D3, CLK,

and CMD are directed to the SD card reader (J19).

Eight signals are connected directly between the module and the J2 or J3 connector.

Figure 3: Block diagram of EVK-NINA-W10

☞ When reset-n is released, the module pin 27 is read as boot-n. When IO-0 is connected to the

module, it must be held high during start up.

Page 7: EVK NINA W1/EVK NINA B2 - U-blox · EVK-NINA-W151 – Evaluation kit for NINA-W151 module, RF port available on U.FL connector (J21) EVK-NINA-W152 – Evaluation kit for NINA-W152

EVK-NINA-W1/EVK-NINA-B2 - User guide

UBX-17011007 - R07 Product description Page 7 of 23

1.4 Jumper description

Parameter Description Name Default

Enable SW1 Jumper at J5-1_J5-2 connects switch 1 to module pin-7 J5

Enable SW2 Jumper at J6-1_J6-2 connects switch 2 to IO-27

(Jumper at J14-15_J14-16 must be populated to connect IO27 to module

pin-18)

J6

Enable RGB-LED Jumper at J7-1_J7-2 connects RED LED to IO-23

(Jumper at J15-3_J14-5 must be populated to connect IO23 to module pin-

1)

J7-RED

Jumper at J7-3_J7-4 connects BLUE LED to IO-21

(Jumper at J16-1_J16-2 must be populated to connect IO21to module pin-

8)

J7-BLUE

Jumper at J7-5_J7-6 connects GREEN LED to IO-33 J7-GREEN

IO/Interface

select

Module pin to IO/Interface distribution J14 See Table 3

IO/Interface

select

Module pin to IO/Interface distribution J15 See Table 3

IO/Interface

select

Module pin to IO/Interface distribution J16 See Table 3

IO/Interface

select

Module pin to IO/Interface distribution J17 See Table 3

IO/Interface

select

Module pin to IO/Interface distribution J18 See Table 3

Enable VCC_IO Connects EVK internal 3.3 V to module pin-9 to supply module VCC_IO J25

Enable VCC Connects EVK internal 3.3 V to modle pin-10 to supply module VCC J26

Table 1: EVK-NINA-W1/EVK-NINA-B2 jumper descriptions

Figure 4: Jumper positions on the EVK

Middle row jumper pin Connected to

J14-1 Module pin-28

J14-3 Module pin-29

J14-5 Module pin-1

J14-7 Module pin-21

J14-9 Module pin-20

J14-11 Module pin-16

J14-13 Module pin-17

J14-15 Module pin-18

J15 (pin-1)

J16 (pin-1)

J17 (pin-1)

J14 (pin-1)

J7 (pin-1)

J26 (pin-1)

J25 (pin-1)

J18 (pin-1)

J6 (pin-1) J5 (pin-1)

Page 8: EVK NINA W1/EVK NINA B2 - U-blox · EVK-NINA-W151 – Evaluation kit for NINA-W151 module, RF port available on U.FL connector (J21) EVK-NINA-W152 – Evaluation kit for NINA-W152

EVK-NINA-W1/EVK-NINA-B2 - User guide

UBX-17011007 - R07 Product description Page 8 of 23

Middle row jumper pin Connected to

J16-1 Module pin-8

J16-3 Module pin-27

J16-5 Module pin-25

J16-7 Module pin-24

J16-9 Module pin-31

J16-11 Module pin-35

J16-13 Module pin-32

J16-15 Module pin-36

Table 2: Available module pins at the middle row of jumpers J14 and J16

Connected to Left row

jumper pin

Middle row

jumper pin

Right row

jumper pin

Connected to Default

IO-5, J4 pin-3 J15-1 J14-1 J14-2 SPI_CS, U5-PB-3 [ J15-1_J14-1 ]

IO-18, J4 pin-6 J15-2 J14-3 J14-4 SPI_CLK, U5-PB-0 [ J15-2_J14-3 ]

IO-23, J4 pin-5 J15-3 J14-5 J14-6 SPI_MOSI, U5-PB-1 [ J15-3_J14-5 ]

reserved J15-4 J14-7 J14-8 J18 pin-1_3 [ J14-7_J14-8 ]

reserved J15-5 J14-9 J14-10 IO-22, J3 pin-6 (RTS) [ J14-9_J14-10 ]

reserved J15-6 J14-11 J14-12 IO-25, J3 pin-4 (DTR) [ J14-11_J14-12 ]

reserved J15-7 J14-13 J14-14 IO-26, J3 pin-3 (DSR) [ J14-13_J14-14 ]

reserved J15-8 J14-15 J14-16 IO-27, J3 pin-7 [ J14-15_J14-16 ]

reserved J17-1 J16-1 J16-2 IO-21, J2 pin-3 [ J16-1_J16-2 ]

reserved J17-2 J16-3 J16-4 IO-0, J3 pin-8 [ J16-3_J16-4 ]

reserved J17-3 J16-5 J16-6 reserved

reserved J17-4 J16-7 J16-8 reserved

Reserved J17-5 J16-9 J16-10 J18 pin-5 [ J16-9_J16-10 ]

Reserved J17-6 J16-11 J16-12 J18 pin-7 [ J16-11_J16-12 ]

Reserved J17-7 J16-13 J16-14 J18 pin-9 [ J16-13_J16-14 ]

Reserved J17-8 J16-15 J16-16 J18 pin-11 [ J16-15_J16-16 ]

Table 3: IO-allocation via jumpers J14, J15, J16, and J17

Connected to Left row

jumper pin

Right row jumper pin Connected to Default

J14-8 J18-1 J18-2 SPI_MISO, U5-PB-2

J14-8 J18-3 J18-4 IO-19, J4 pin-4 (CTS) [ J18-3_J18-4 ]

J16-10 J18-5 J18-6 IO-14, J4 pin-2 [ J18-5_J18-6 ]

J16-12 J18-7 J18-8 IO-13, J4 pin-9 [ J18-7_J18-8 ]

J16-14 J18-9 J18-10 IO-15, J4 pin-1 [ J18-9_J18-10 ]

J16-16 J18-11 J18-12 IO-12, J4 pin-10 [ J18-11_J18-12 ]

Table 4: IO-allocation via jumper J18

Page 9: EVK NINA W1/EVK NINA B2 - U-blox · EVK-NINA-W151 – Evaluation kit for NINA-W151 module, RF port available on U.FL connector (J21) EVK-NINA-W152 – Evaluation kit for NINA-W152

EVK-NINA-W1/EVK-NINA-B2 - User guide

UBX-17011007 - R07 Product description Page 9 of 23

1.4.1 Default jumper configuration

Figure 5: Jumper configuration to enable UART, IOs, and switches 1 and 2

1.4.2 RMII to PHY jumper configuration

The jumpers shown in Figure 6 must be inserted to connect the 10Base-T/100Base-TX PHY with the

associated module RMII interface pins.

When the RMII PHY is connected to the module, the “BLUE-LED” is not available at IO-21.

Figure 6: RMII to PHY jumper configuration

J18-10 to IO15

Mod pin-21 to J18-3

SW2 to IO27

Mod pin-20 to IO22 (RTS)

Mod pin-16 to IO25 (DTR)

Mod pin-17 to IO26 (DSR)

3.3V to Mod pin-10

3.3V to Mod pin-9

J18-6 to IO14

J18-8 to IO13

SW1 to IO33

J18-12 to IO12

Mod pin-31 to J18-5

Mod pin-35 to J18-7

Mod pin-32 to J18-9

Mod pin-36 to J18-11

J18-4 to IO19 (CTS)

Mod pin-18 to IO27

Mod pin-27 to IO0

Mod pin-29 to IO18

Mod pin-28 to IO5

Optional: Jumpers to connect

J20

with module JTAG interface Jumpers to connect Ethernet

PHY

with module RMII interface

Page 10: EVK NINA W1/EVK NINA B2 - U-blox · EVK-NINA-W151 – Evaluation kit for NINA-W151 module, RF port available on U.FL connector (J21) EVK-NINA-W152 – Evaluation kit for NINA-W152

EVK-NINA-W1/EVK-NINA-B2 - User guide

UBX-17011007 - R07 Product description Page 10 of 23

1.5 LEDs

Figure 7: Position of LEDs on EVK-NINA-W1/EVK-NINA-B2

Function Description Name Color

Power LED Supplied from the EVK 3.3 V DC/DC converter DS8 Green

UART TxD Flashing LED indicates UART Tx activity (output from the module) DS2 Green

UART RxD Flashing LED indicates UART Rx acitivty (input to the module) DS3 Amber

UART RTS LED indicates UART RTS status (output from the module) DS4 [ 1 ] Green

UART CTS LED indicates UART CTS status (input to the module) DS5 [ 1 ] Amber

UART DTR LED indicates UART DTR status (output from the module) DS6 [ 1 ] Green

UART DSR LED indicates UART DSR status (input to the module) DS7 [ 1 ] Amber

status RGB LED shows status for u-connectXpress

☞ See the data sheet for NINA-W10, NINA-W13, NINA-W15 and

NINA-B2 for additional information.

DS9 [ 1 ] RGB

Table 5: EVK-NINA-W1/EVK-NINA-B2 LEDs description

☞ [1] To control the LEDs, the corresponding signal jumper(s) must be populated.

1.5.1 RGB-LED jumper configuration

The jumpers shown in Figure 7 must be inserted to connect the RGB-LED driver with the associated

module pins.

Figure 8: RGB-LED to IO signals jumpers

DS2

DS4

DS8

DS5

DS6

DS9

DS7

DS3

IO-33 to GREEN LED

IO-21 to BLUE LED

IO-23 to RED LED

Mod pin-1 to IO-23

Mod pin-8 to IO-21

Page 11: EVK NINA W1/EVK NINA B2 - U-blox · EVK-NINA-W151 – Evaluation kit for NINA-W151 module, RF port available on U.FL connector (J21) EVK-NINA-W152 – Evaluation kit for NINA-W152

EVK-NINA-W1/EVK-NINA-B2 - User guide

UBX-17011007 - R07 Product description Page 11 of 23

1.6 Connectors

The available connectors on the EVK-NINA-W1/EVK-NINA-B2 board are shown in Figure 9.

Figure 9: EVK-NINA-W1/EVK-NINA-B2 connectors

Connector Description

J1, J2, J3, J4 Connectors for accessing the NINA-W1 IO signals (GPIO)

J8 USB connector; type Micro-B

J10 Reserved

J21 RF-port at U.FL coaxial connector for external antenna (not used on EVK-NINA-B221 or EVK-NINA-W1x2)

J22 RJ45 connector, RMII to PHY

J23 2.1 mm Power jack, positive center pin, 5 – 12 V

Table 6: EVK-NINA-W1/EVK-NINA-B2 connector descriptions

1.7 Buttons

The EVK-NINA-W1/EVK-NINA-B2 evaluation board has four buttons as explained in Table 7. Two of

them can be connected to NINA pins via jumper configuration.

Button Description

RESET Reset button, triggers the reset logic that pulls module pin-19 low

BOOT If reset is asserted pressing BOOT-switch will pull module pin-27 low

SW1 General function button connected to jumper J5 pin-2

SW2 General function button connected to jumper J6 pin-2

Table 7: EVK-NINA-W1/EVK-NINA-B2 buttons descriptions

Page 12: EVK NINA W1/EVK NINA B2 - U-blox · EVK-NINA-W151 – Evaluation kit for NINA-W151 module, RF port available on U.FL connector (J21) EVK-NINA-W152 – Evaluation kit for NINA-W152

EVK-NINA-W1/EVK-NINA-B2 - User guide

UBX-17011007 - R07 Product description Page 12 of 23

1.8 Configuration options

Module pin

number

IO- signal Primary

function

Accessible at

Jumper/Connector

Module pin

number

IO-

signal

Primary

function

Accessible at

Jumper/Connector

1 GPIO-23 J14-5, [J4-5, J7-1] ( 1

)

20 GPIO-22 UART_RTS J14-9, [J3-7] ( 1 )

2 GPI-34 J2-3 21 GPIO-19 UART_CTS J14-7, [J4-4] ( 1 ) ( 2 )

3 GPI-39 J2-1 22 GPIO-1 UART_TXD J3-2

4 GPI-36 J2-2 23 GPIO-3 UART_RXD J3-1

5 GPIO-32 J2-6, J11-2 24 GPIO-4 J16-7

6,12, 14 GND J1-6,-7, J4-7, J12-1,-

2

25 GPIO-2 J16-5

7 GPIO-33 J2-5, J5-1, J7-5 26, 30 GND J1-6,-7, J4-7, J12-1,-

2

8 GPIO-21 J16-1, [J2-4, J7-3] ( 1

)

27 GPIO-0 J16-3, [J3-8] ( 1 )

9 VCC_IO J25-2 28 GPIO-5 J14-1, [J4-3] ( 1 )

10 VCC J26-2 29 GPIO-18 J14-3, [J4-6] ( 1 )

13 RF-port Antenna J21 31 GPIO-14 J16-9, [J4-2] ( 1 ) ( 2 )

16 GPIO-25 UART_DTR J14-11, [J3-4] ( 1 ) 32 GPIO-15 J16-13, [J4-1] ( 1 ) ( 2 )

17 GPIO-26 UART_DSR J14-13, [J3-3] ( 1 ) 34 GPI-35 J3-5

18 GPIO-27 J14-15, [J3-6, J6-1] (

1 )

35 GPIO-13 J16-11, [J4-9] ( 1 ) ( 2 )

19 RESET-N RESET (J1-3 via logic) 36 GPIO-12 J16-15, [J4-10] ( 1 ) ( 2 )

Table 8: Module pin to IO signal conversion

☞ (1) Connector/jumper placed inside the brackets indicates that a jumper must be positioned at

the corresponding position of the IO distribution jumpers J14 – J17 if the IO-signal is to be

presented at the designated connector/jumper as mentioned in Table 3.

☞ (2) These IO signals require a second jumper to be positioned at the IO distribution jumper J18 as

mentioned in Table 4.

1.8.1 Power supply

The supply voltage to the EVK-NINA-W1/EVK-NINA-B2 evaluation board can be sourced from the

following connectors:

USB (J8)

☞ Depending on your USB source, the USB supply current may be insufficient.

External power supply (J23): The external supply voltage must be in the range 5 – 12 V

Page 13: EVK NINA W1/EVK NINA B2 - U-blox · EVK-NINA-W151 – Evaluation kit for NINA-W151 module, RF port available on U.FL connector (J21) EVK-NINA-W152 – Evaluation kit for NINA-W152

EVK-NINA-W1/EVK-NINA-B2 - User guide

UBX-17011007 - R07 Setting up the evaluation board Page 13 of 23

2 Setting up the evaluation board The EVK-NINA-W10 is delivered without any software (open CPU) and the software must be

developed by the user.

The EVK-NINA-B2, EVK-NINA-W13, and EVK-NINA-W15 are delivered with the u-blox connectivity

software pre-flashed on the module.

⚠ The module is designed to be used only with the applicable software and only compatible

software can be flashed on the module.

Before connecting the module, download and install the latest u-blox s-center evaluation software

from the u-blox website.

Plug in external supply power at connector J23 or connect J8 (USB type Micro B) to a USB host

using the USB cable. The status light (DS8) will turn green, indicating that the internal EVK 3.3 V is

on.

⚠ When using the evaluation board with external antenna, before powering up the EVK, ensure

that you have connected the 2.4 GHz antenna with the U.FL antenna connector (J21). Failing to

do so may cause undesired operation.

⚠ Be careful to check polarity before connecting external power supply to the evaluation board.

Center conductor is positive (+) and the ring is negative (-).

⚠ The current consumption during startup of the evaluation board can be high.

The operating system will install the correct COM port drivers automatically. The drivers will need to

be installed only when you connect the unit to a new computer for the first time. For more

information about the COM ports and their configuration, see the FTDI FT4232H Datasheet [6].

One COM port will automatically be assigned to the unit by the Windows OS. To view the assigned

COM ports on Windows 7, follow the steps mentioned below:

Open the Control Panel and click Hardware and Sound.

Click Device Manager in Devices and Printers. This will open the Device Manager window where

you can view the assigned COM ports.

2.1 EVK without software (open CPU)

The chapter is applicable to the following EVKs.

EVK-NINA-W101

EVK-NINA-W102

When using the NINA-W10 open CPU variant, it is not possible to download the u-blox connectivity

software. Use the software developed and compiled using the Espressif SDK on this variant.

Information on how to build and FLASH the module when using Espressif SDK is available at the

following URL - http://esp-idf.readthedocs.io/en/latest/get-started/index.html.

This URL webpage provides information on how to set up the software environment using the

hardware based on the Espressif ESP32 such as NINA-W10 and also how to use the ESP-IDF

(Espressif IoT Development Framework).

The following steps must be performed to compile, flash, and execute a program on NINA-W10:

Set up the Toolchain

o Windows, Mac, and Linux is supported

Page 14: EVK NINA W1/EVK NINA B2 - U-blox · EVK-NINA-W151 – Evaluation kit for NINA-W151 module, RF port available on U.FL connector (J21) EVK-NINA-W152 – Evaluation kit for NINA-W152

EVK-NINA-W1/EVK-NINA-B2 - User guide

UBX-17011007 - R07 Setting up the evaluation board Page 14 of 23

Get the ESP-IDF

o Download the GIT repository provided by Espressif

Setup Path to ESP-IDF

o The tool chain program can access the ESP-IDF using the IDF_PATH environment variable

Build and Flash

o Start a Project, Connect, Configure, Build and Flash a program

More information about this is available at http://esp-idf.readthedocs.io/en/latest/index.html

More information on this topic can be found in the NINA-W1 System Integration Manual [7].

2.2 EVK with u-blox connectivity software

This section is applicable for the following EVKs:

EVK-NINA-B221

EVK-NINA-B222

EVK-NINA-W131

EVK-NINA-W132

EVK-NINA-W151

EVK-NINA-W152

2.2.1 Starting up

Perform the following steps to enable communication with the module:

1. Start the u-blox s-center evaluation software.

2. Use the default baud rate 115200, 8N1 with flow control. Now, it is possible to communicate

with the module through AT commands.

For a list of available AT commands, see the u-blox Short Range AT Commands Manual [5].

2.2.2 Getting the latest software

Go to the u-blox support web page to obtain the latest available software. Instructions on reflashing

the evaluation board can be found in the Software section of the NINA-B2 System Integration

Manual [8] or the NINA-W1 System Integration Manual [7].

Page 15: EVK NINA W1/EVK NINA B2 - U-blox · EVK-NINA-W151 – Evaluation kit for NINA-W151 module, RF port available on U.FL connector (J21) EVK-NINA-W152 – Evaluation kit for NINA-W152

EVK-NINA-W1/EVK-NINA-B2 - User guide

UBX-17011007 - R07 Appendix Page 15 of 23

Appendix

A Layouts

Figure 10: Primary and secondary side layouts of EVK-NINA-W1/EVK-NINA-B2

R 1 0

D S 8

D 5

J 8

J 2 3

R 2 0

C 8

F 1

R 1 9

D 1

C 9

J 2 2

C3

4C

14

R 1 8R 1 7

D 4

C 4 0

D 3

S 4

C 4 2

L 1C 4 4

C4

1

C4

3

C 4 6

C4

5

R 7 2

R 6 9R 7 1

C2

6R

30

R2

1

R1

C 4 7

U 7

J 2 4

C1

5

F B 1

F B 2

Y 1

R 1 3

J 4

R2

R 7 4R 7 5

C2

1

R2

9

C1

6C

12

C1

3R

23

U 6R

37

R3

L 2

C1

7

C 2 3

C2

5

R2

5

R 2 2

C 1 0

J 1

C2

0

U 5

J 2 0

C 1 8

C 1 1

C2

2

C 1 9

C2

4

R 3 3

R 5 1

R 3 4

R 3 1

R 4 1

R1

6R

38

R 1 1

U 4

C3

R 3 2

D 6

R6

8

C 4

FB

3

R 5 2

D2

J 1 0

R4

0

J 3

J 2

J 7

C3

8 Y 3

C3

3C

32

R5

3

R3

9

R6

7

U 8

C 3 5C 3 6

C 4 9

C4

8R

43

R3

6

U 9

C 3 9

J 1 1

R 5 5

Y 2

C3

1

R 5 7

C3

0

R 6 4

R 6 5

R 5 9R 5 8

R 6 0

R3

5

C2

7

R4

7R

48

R 5 6R 6 2R 6 1R 6 3R 5 4

C3

7 R 4 2

R2

8

J 1 7

J 1 5

S 3

R2

7

J 1 6

J 1 4

R2

6

C 7

J 1 8

J2

5

J 5

C2

8

S 1

R 7 0

R 4 5

C2

9

J2

6

R 4 6R 7 8R 8 1R 7 3

R 6 6R 7 9

R8

0R

77

R 4 4R 7 6

C 5

J 6

U 1

U 3

C 1

U 2

C 2

S 2

D S 7

D S 6

D S 5

D S 4

D S 3

D S 2

C6

R 8

R 9

R 7

R 6

R 5

R 4

97

53

1

10

86

42

R2

4

R 5 0 R 4 9

J1

2

M 1

R 1 2R 1 4R 1 5

J 2 1

D S 1

J 1 9

1

T P 4

T P 3

T P 2

T P 1

T P 6T P 5

T P 7

R1

50

R1

49

Page 16: EVK NINA W1/EVK NINA B2 - U-blox · EVK-NINA-W151 – Evaluation kit for NINA-W151 module, RF port available on U.FL connector (J21) EVK-NINA-W152 – Evaluation kit for NINA-W152

EVK-NINA-W1/EVK-NINA-B2 - User guide

UBX-17011007 - R07 Appendix Page 16 of 23

B Schematic drawings

Page 17: EVK NINA W1/EVK NINA B2 - U-blox · EVK-NINA-W151 – Evaluation kit for NINA-W151 module, RF port available on U.FL connector (J21) EVK-NINA-W152 – Evaluation kit for NINA-W152

TXD

RTS

CTS

DTR

DSR

RXDMOP-23

ORANGE

GREEN

3V3

VCC=3V3;GND=GND

20%

IO-33/SW-1/GREEN_LED

IO-12/SDIO_D2/TDI

IO-13/SDIO_D3/TCK

IO-19/SPI_DO/CTS/RMII_TXD0

IO-15

IO-5

IO-19

IO-13

IO-12

5%

0

ORANGE

5%

ETH_RESET-DLY

LED_RED

LED_BLUEIO-215%220RGREEN

ORANGE

GREEN

GREEN

220R

100N

3V3

LED_GREEN

ETH_RESET-DLY

EVB_RESET-N

IO-3/RXD

IO-1/TXD

IO-26/DSR/RMII_RXD1

IO-25/DTR/RMII_RXD0

I-35

IO-27/SW-2/RMII_CRSDV

IO-22/RTS/SPI_WP/RMII_TXD1

VCC=3V3;GND=GND

VCC=3V3;GND=GND

3V3

IO-26

IO-25

IO-19

MOP-22

IO-22

3V3

IO-23

Wed Mar 15 16:05:40 2017

PAGE 1 OF 5

EVB-NINA-W1Ovik

u-blox AG $Change: 583817

B

04

I-39

I-36

I-34

IO-21/SPI_HD/BLUE_LED/RMII_TXEN

IO-32/LPO

10%

IO-0/SYS_BOOT/RMII_CLK

RESET-N

MOP-23

MOP-22

MOP-34

ARDUINO_1C

IO-0

IO-22

IO-25

IO-26

IO-27

IO-15/SDIO_CMD/TDOEVB_RESET-N

MOP-3

MOP-4

IO-21

ARDUINO_1B

MOP-7

MOP-2

5%

5%

NC

220R

100N

220R

10%

10%

3V3 5%

5%

220R

220R 5%

100N

10%

10%

100N

10K

IOREF

33R

220R

GND

IO-18/SPI_CLK

5%

0R

0VIN

10%

100N

SW2

2U2

VIN

10K

5%

IO-27

SW-1

MOP-7

5%1K0

1K0

5%2K7

10K

10K 5%

10K

VCC=3V3;GND=GND

RGB

5%

100N

IO-18

3V3

RESETIO-23

EVB_RESET-N

3V3

ETH_RESET-N

3V3

HEADERS/LED/SW

5%

3V3USB_5V

RESET-N

MOP-7

5%

NC

0R

ARDUINO_1A

GND

GND

5V0

3V3

MOP-5

IO-23/SPI_DI/RED/LED

IO-5/SPI_CS

IO-14/SDIO_CLK/TMS IO-14

ARDUINO_1D

1

1

1

1

1

1

1

1

1

1

1

1

R

G

B

A

65

43

21

U1

U2

U3

U4

J7

DS1

R26

R7

R8

R9 R10

R6

R5

R16

R1

R4

R14

R12

R15

R28

R27

R3

R2

DRAWING TITLE :

74LVC3G07

74LVC3G07

1

2

54

3

6

789

10

wurth_150141m173100

74LVC3G07

74LVC3G07

1

2

5

43

8

76

1

2

5

43

8

76

654

32

1

C1

C2

C6

C5

C7

R11

C3

C4

C

3

C

A

A

7

5

5

6

3

1 7

2

C

AC

AC

5

6

3

1 7

2

6

3

1

2

123

8

4567

3

163

8

C

2

4

4

2

A

1 2

1

3

3

A C

3

1

4

2

2

7

10

543

1

6

2

1

5 642

5

7

6 2

3

1

1 3

2

4

6

4

A

1

5

12

54

12

789

DS3

DS2

DS4

DS5

DS8DS7

DS6

J1

J3

S3

S2

S1J5

J6

J2

J4

E

D

C

B

A A

E

D

C

B

12345678

345678 2

U-BLOX AG

DATE :

SWITZERLAND

1

THALWIL

GROUP :

DESIGN BY :

ICM:

PCB_VER.:

VERSION :PROJECT :

A3

Page 18: EVK NINA W1/EVK NINA B2 - U-blox · EVK-NINA-W151 – Evaluation kit for NINA-W151 module, RF port available on U.FL connector (J21) EVK-NINA-W152 – Evaluation kit for NINA-W152

Wed Mar 15 07:44:12 2017EVB-NINA-W1

PAGE 2 OF 5

BOvik

u-blox AG

04

$Change: 583817

10%

100N

12MHZ

EVB_RESET-N

3P9

+/-0.5P

30R@100MHZ

10%

100N

100N

100N

5%

10K

5%

10K

5%

18P 5%

FTDI_SPI_CLK

FTDI_BOOT-N

5%

DNI

10%

20%

0

USB_5V

2K2

100N

10%

10%

100N

10%

100N

100N

10%

10%

10%

100N

10%

100N

10%

100N

30R@100MHZ

20%

4U7

10%

10%

FTDI_IO-D14U7

FTDI_TDI

FTDI_IO-D2

0R 0

0R

00R

0R

USB-FTDI INTERFACE

4U7

20%

3V3

3V3

FTDI_IO-D3

FTDI_IO-D4

FTDI_IO-D5

5%

0

IO-22

12K

10K

3V3

40PPM

3P9

00R

0R

USB_DM_D

FTDI_USB_DP

5%

18P

5%

1%

FTDI_SPI_CS

0FTDI_RESET-N

FTDI_TDO

FTDI_SPI_MISO

5%

0

0R

IO-25

IO-26

0

00R IO-19

FTDI_DSR

FTDI_IO-D0

0R

0R

0R 0 MOP-22FTDI_RXD

0R 0 MOP-23FTDI_TXD

FTDI_DTR

FTDI_CTS

FTDI_RTS

FTDI_SPI_MOSI

FTDI_IO-D7

FTDI_IO-D6

0

0

USB_DP_D

FTDI_TMS

0R

FTDI_TCK

+/-0.5P

5%

3V3

JTAG_BOOT-N

RESET-N

JTAG_TMS

JTAG_TDO

JTAG_TDI

JTAG_TCK

FTDI_USB_DM

100N

10K

10K

3V3

10M

100N

SGND=GNDA

USB_DP

USB_DM

USB_5V

DNI

10K

100K

5%

US

B M

ICR

O B

GN

D

AG

ND

GN

D

GN

D

GN

D

GN

D

GN

D

GN

D

GN

D

GN

D

DM

VUSB

GND

DP

N.C.

TXD/TCK/SCL

DTR#/GPIO0

CTS#/TMS/CS

DSR#/GPIO1

DCD#/GPIO2

RI#/TXDEN#/GPIO3

RTS#/TDO/DI

RTS#/TDO/DI

CTS#

RI#/TXDEN#

EECLK

EECS

DP

DM

RESET#

EEDATA

CTS#/TMS/CS

DTR#/GPIO0

RXD/TDI/DO

TXD/TCK/SCL

OSCI

TXD

DCD#

RXD

VCORE

DSR#/GPIO1

DCD#/GPIO2

TXD

CTS#

RI#/TXDEN#/GPIO3

RXD

RTS#

SUSPEND#

PWREN#

TEST

RI#/TXDEN#

RXD/TDI/DO

VCCIO

VCCIO

VCCIO

VCCIO

VCORE

DCD#

DSR#

RTS#

DSR#

DTR#

DTR#

VCORE

VREGOUT

OSCO

VPHY

VPLL

VREGIN

REF

93XX56X

GNDA

U6

J8

VCCGND

I/O1 I/O1

I/O2 I/O2

GND

DI

VCC

CS

CLK

DO

CAT AN

R1

9

R13

D6

C25

R40

C34

R18

R17

C26

R32

R39R38

R37R36R35

J10

C14

R30

R33R31

R41

R34

R29

R20

C8

DRAWING TITLE :

1

23

45

87

6

FT4232H

PO

WE

R

PO

RT

AP

OR

T B

PO

RT

CP

OR

T D

R23

R21

R25

R22

C13

C19

C18

C17

C23

C22

C21

C16

C15

C24

C12

C11

C20

C9

R24

C10

21

5

34

16

2119

222324

28

18

54

46

6263

87

14

61

2930

2726

2

48

45

5264

3233

38

41

34

3940

36

60

13

59

17

56423120

37

5857

53

4443

55

12

49

3

49

50

62

3

6

5

4

1

4

678

21

5

63

5

1

2

4

3

USBLC6 2SC6

FB2

FB1

J24

E

D

C

B

A A

E

D

C

B

12345678

345678 2

U-BLOX AG

DATE :

SWITZERLAND

1

THALWIL

GROUP :

DESIGN BY :

ICM:

PCB_VER.:

VERSION :PROJECT :

1

10

51

475

25

35

11

15

65

D1

Y1

U5

A3

Page 19: EVK NINA W1/EVK NINA B2 - U-blox · EVK-NINA-W151 – Evaluation kit for NINA-W151 module, RF port available on U.FL connector (J21) EVK-NINA-W152 – Evaluation kit for NINA-W152

MOP-9 -> VCC_IO

POPULATE POSITION M1 WITH NINA-W132

EVB-NINA-W102 WITH INTERNAL ANTENNA

PRODUCT VARIANTS

POPULATE POS M1 WITH NINA-W101

EVB-NINA-W101 WITH U.FL CONNECTOR

MOP-10 -> VCC

MOP-6 -> GNDMOP-7 -> SW-1/LED_GREEN/GPIO-33MOP-8 -> RMII_TXEN/LED_BLUE/GPIO-21

MOP-5 -> LPO_CLK/GPIO_32MOP-4 -> GPI-36MOP-3 -> GPI-39MOP-2 -> GPI-34MOP-1 -> SPI_DI/LED_RED/GPIO-23

MOP-35 -> JTAG_TCK/SDIO_D3/GPIO-13

3 X 16 PINHEADER

POPULATE POSITION M1 WITH NINA-W102

EVB-NINA-W131 WITH U.FL CONNECTOR

POPULATE POS M1 WITH NINA-W131

EVB-NINA-W132 WITH INTERNAL ANTENNA

MOP-30 -> GND

MOP-32 -> JTAG_TDO/SDIO_CMD/GPIO-15/BSP-1(10K PULL-DOWN)

MOP-33 -> RESERVED

MOP-34 -> GPI35

ANTENNA U.FL CONNECTOR

MOP-36 -> JTAG_TDI/SDIO_D2/GPIO-12/BSP-2(10K PULL-UP)

MOP-27 -> RMII_CLK/GPIO-0/BOOT-N(10K PULL-UP)

MOP-28 -> SPI_CS/I2C_SDA/GPIO-5/BSP-0

MOP-29 -> SPI_CLK/I2C_SCL/GPIO-18

MOP-31 -> JTAG_TMS/SDIO_CLK/GPIO-14

MOP-14 -> GND

MOP-18 -> RMII_CRSDV/SW-2/GPIO-27

MOP-23 -> UART_RXD/GPIO-3

MOP-25 -> RMII_MDCLK/SDIO_D0/GPIO-2/BSP-3MOP-24 -> RMII_MDIO/SDIO_D1/GPIO-4

MOP-22 -> UART_TXD/GPIO-1MOP-21 -> RMII_TXD0/SPI_DO/UART_CTS/GPIO-19MOP-20 -> RMII_TXD1/UART_RTS/GPIO-22MOP-19 -> RESET-N(150K PULL-UP 10NF TO GND)

MOP-17 -> RMII_RXD1/UART_DSR/GPIO-26MOP-16 -> RMII_RXD0/UART_DTR/GPIO-25

MOP-15 -> RESERVED

MOP-11 -> RESERVEDMOP-12 -> GNDMOP-13 -> RF_PORT

MOP-26 -> GND

Thu Mar 16 16:17:45 2017

PAGE 3 OF 5

EVB-NINA-W1Ovik

u-blox AG $Change: 583817

B

04

10K 5%

BOM_EVK_NINA_W132=UBXH14-0000348BOM_EVK_NINA_W131=UBXH14-0000349

1K0

RESET-N

BOM_EVK_NINA_W132=DNI

FTDI_SPI_CLK

MOP-28

JTAG_TDO

0

FTDI_SPI_CS

3V3

10%

MOP-18

RESET-N

MOP-17

MOP-16

ETH_TXD1

MOP-20

MOP-21

MOP-36

MOP-29

MOP-32

MOP-31

MOP-28

MOP-34

MOP-27

MOP-35

3V3

5%

ETH_RESET-N

VCC=3V3;GND=GND

3V3

MOP-9

2K7

10K

DNI

DNI

0R

MOP-10

IO-0

5%

10R

10R

10R

10R

3V3

SDIO_D2

SDIO_D1

10R

5%

5% SDIO_D3

GND=GND

JTAG_TDI

JTAG_RESET-N

10K

10K 5%

5%

10K

JTAG_TMS

MOP-25

SDIO_D0

SDIO_CLK

SDIO_CMD

3V3

3V3

5%

10K

5%

5%

10K

5%10K

ETH_MDC

ETH_REFCLK

10R

5%

5%

5%

MOP-36

JTAG_TMS

JTAG_TCK

0R

IO-12

IO-15

IO-13

IO-14

MOP-5

5%

5%

20PPM

MOP-3

MOP-2

MOP-1

100N

MOP-10

3V3

MOP-8

JTAG_TDO

IO-26

MOP-5

DNI

MOP-27

MOP-16

MOP-20

MOP-17

MOP-18

MOP-24

ETH_TXEN

JTAG_TCK

JTAG_TDI

IO-18

ETH_TXD0

IO-23

IO-27

MOP-23

MOP-24

MOP-25

10N

10%

JTAG_BOOT-N

10%

100N

IO-19

MOP-31

ETH_MDIO

IO-5

NINA-W1

FTDI_SPI_MISO

100N 10%

ETH_CRSDV

ETH_RXD1

ETH_RXD0

MOP-29

MOP-1

MOP-21

IO-21

MOP-32

MOP-35

MOP-27

100N

MOP-22

MOP-9

MOP-8

0R

0R

DNI

IO-22

0R

10%

IO-25

32.768KHZ

SPI_MISO/IO-19

FTDI_SPI_MOSI

MOP-7

MOP-4

3V3

9

7

5

1

3

12

10

8

6

11

2

4

6

12

1615

1413

11

1

109

87

5

43

2

6

12

1615

1413

11

1

109

87

5

43

2

109

1

7

3

5

8

2

6

4

29

33

28

34

35

36

26

31 27

15

14

13

12

11

32

30

J20

J14

J16

J18

DAT1

DAT2

CD/DAT3

CLK

CMD

VDD

VSS

DAT0

7

42

1

4

1

10

6

4

3

5

2

8

7

5

8

9

2

6

3

22

23

25

17

24

3

2

16

4

1

21

20

19

18

6

7

8

10

9

5

MICROSD CARD

R81R80R79

R78R77R76

R73R70

R66R46R45

R44

R43

J17

R48

R47

R50

R49

R150

R149

C39

R51

J15

C48 R42

DRAWING TITLE :

1

1

2

345

876

1

2

345

876

J19

VDD

GND

CLKOUT

CLKOE

1

C28

C27

C29

2223

25

17

2432

16

4

1

21201918

678

109

5

6

12

16151413

11

1

10987

5432

21

543

678

6

12

16151413

11

1

10987

5432

21

543

678

2

4

1

5

1

101211

68

3

79

4

3 2

3

4

21

21

ANTENNA

U9NC7SZ125

OE_N

J11

J26

J12

S4

J21

J25

E

D

C

B

A A

E

D

C

B

12345678

345678 2

U-BLOX AG

DATE :

SWITZERLAND

1

THALWIL

GROUP :

DESIGN BY :

ICM:

PCB_VER.:

VERSION :PROJECT :

29

33 2

83

4

35

362

6

31 2

7

15

14

13

12

11

323

0

Y2 OV_7604_C7

M1

A3

Page 20: EVK NINA W1/EVK NINA B2 - U-blox · EVK-NINA-W151 – Evaluation kit for NINA-W151 module, RF port available on U.FL connector (J21) EVK-NINA-W152 – Evaluation kit for NINA-W152

2.1MM POWER JACK4.75 V < VIN < 12 V

Fri Mar 17 11:30:21 2017

Ovik04

$Change: 583817

EVB-NINA-W1

PAGE 4 OF 5u-blox AG

B

ETH_MDC

ETH_MDIO

ETH_TXEN

10R

4K7

3V3

10R

VIN

1K0

22U

20%

0

5%

20%

DNI0R

PHY_XO_IN

PHY_LED0

5%22P

10%

22U

100N

10%

DNI

1K0

5%

3V3

3N3

10N

22U

100N4U7

5%

10R

5%

10%

GND=GND

POWER & ETHERNET

1K0

100K 1%

0

1%

5%

5%

20%

5%1K0

1K0

PHY_RXP

PHY_TXP

120R

3V3

5%

5%

2U2

3V3

3V3

2U2

6K49

3V3

20%

3V3

10%

5%

EVB_RESET-N0R

10%

100N

10%

PHY_RXN

PHY_TXN

2U2

5%

5%

5%

5%

5%

5%

ETH_RXD1

ETH_RXD0

ETH_TXD1

ETH_TXD010R

10R

10R

10R

10%

ETH_CRSDV3V3

20%

100N

100N

10%

10%

ETH_REFCLK

+/-20PPM25.0MHZGND=GND

10R

100N

5%

PWR_JACK_IN10U

30%

3V3

10%

1N5

10K

ETH_RESET-N

4K7

10%

10%4U7

USB_5V

30R@100MHZ

CAT

AN

GNDA

CHS_GND

CHS_GND

YELLOW_LED_A

YELLOW_LED_C

GREEN_LED_A

GREEN_LED_C

CHS_GND

CT

RD-

RD+

CT

TD-

TD+

ST

OUT

VCC

LED0/ANEN_SPEED

REF_CLK

RXD1

RXD0

INTRP

CRSDV/PHYAD[1:0]

RST_N

MDC

GND

MDIO

TXEN

RXER

TXD0

TXD1

VDDIO

VDD_1_2

VDDA_3_3

TX-

TX+

RX+

RX-

XI

XO

REXT

J22

U8

Y3

CAT

AN

R6

5

C3

5

C3

3C4

9

C3

0

C3

1 C3

6

C3

2

R56

R52

R57

R69

R74

L1

FB3

L2

R68

R72R71

R75

C44

R60

R61

R62

R58R59

R63

R64

C45C43

D2

DRAWING TITLE :

KSZ8081

D5

C47

C41

C38

R54

R55

C46

R67

C40

R53

15

17

1011

A

9

212

1413

5

11

9

6

32

6

3

310

9

14

13

16

15

5

4

7

8

24

1

21

21

21

61

3

18

14

1920

12

8

4

10

13

3

16

12

41

C

21

11

8

23

4

5

7

CA

J23

D3

D4

CON_PWR_03_SWITCH

TP7

TP2TP1

TP6

TP5

C37

TP4TP3 C42

E

D

C

B

A A

E

D

C

B

12345678

345678 2

U-BLOX AG

DATE :

SWITZERLAND

1

THALWIL

GROUP :

DESIGN BY :

ICM:

PCB_VER.:

VERSION :PROJECT :

PGND_2

PGND_1

PG

VOS

SW_3

SW_2

SW_1

PVIN_2

PVIN_1

F1

AGND

FB

FSW

DEF

SS/TR

EN

AVIN

FUSE

U7TPS6213X

A3

Page 21: EVK NINA W1/EVK NINA B2 - U-blox · EVK-NINA-W151 – Evaluation kit for NINA-W151 module, RF port available on U.FL connector (J21) EVK-NINA-W152 – Evaluation kit for NINA-W152

EVK-NINA-W1/EVK-NINA-B2 - User guide

UBX-17011007 - R07 Appendix Page 21 of 23

C Glossary Name Definition

COM Communication

CTS Clear to send

DSR Data set ready

DTR Data terminal ready

EVK Evaluation kit

GND Ground

GPI General purpose input

GPIO General Purpose Input/Output

IO Input-output

LED Light-Emitting Diode

PHY Physical layer

U.FL Miniature coaxial RF connector

USB Universal serial bus

RF Radio frequency

RMII Reduced Media-Independent Interface

RTS Request to send

UART Universal asynchronous receiver/transmitter

USB Universal serial bus

VCC IC power-supply pin

Table 9: Explanation of abbreviations used

Page 22: EVK NINA W1/EVK NINA B2 - U-blox · EVK-NINA-W151 – Evaluation kit for NINA-W151 module, RF port available on U.FL connector (J21) EVK-NINA-W152 – Evaluation kit for NINA-W152

EVK-NINA-W1/EVK-NINA-B2 - User guide

UBX-17011007 - R07 Related documents Page 22 of 23

Related documents [1] NINA-W10 data sheet, doc. no. UBX-17065507

[2] NINA-W13 data sheet, doc. no. UBX-17006694

[3] NINA-W15 data sheet, doc. no. UBX-18006647

[4] NINA-B2 data sheet, doc. no. UBX-18006649

[5] u-connect AT commands manual, doc. no. UBX-14044127

[6] FTDI FT4232H QUAD HIGH SPEED USB TO MULTIPURPOSE UART/MPSSE IC Datasheet -

http://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT4232H.pdf

[7] NINA-W1 system integration manual, doc. no. UBX-17005730

[8] NINA-B2 system integration manual, doc. no. UBX-18011096

☞ For regular updates to u-blox documentation and to receive product change notifications,

register on our homepage (www.u-blox.com).

Revision history Revision Date Name Comments

R01 22-May-2017 ovik, kgom Initial release.

R02 04-Jul-2017 ovik, mwej Updated Figure 9 and Table 8 due to pin swap on connectors J2 and J3.

Updated schematic drawing (Appendix B). Updated assigned COM ports in

section 2.1.

R03 09-Nov-2017 kgom Renamed this document as EVK-NINA-W13 User Guide and updated the content

due to the availability of a separate user guide for the

EVK-NINA-W10x evaluation kits (UBX-17057549).

R04 12-Mar-2018 cmag Updated the software version to 1.0.0 in the last table on page 2 and the “Related

documents and links” section.

R05 29-Nov-2018 fbro, kgom Renamed this document. Restructured the information to include support for

EVK-NINA-W1 and EVK-NINA-B2.

R06 8-Jul-2019 ovik Minor updates.

R07 5-Sep-2019 flun Clarified the status for RGB LED in Table 5 (section 1.5).

Page 23: EVK NINA W1/EVK NINA B2 - U-blox · EVK-NINA-W151 – Evaluation kit for NINA-W151 module, RF port available on U.FL connector (J21) EVK-NINA-W152 – Evaluation kit for NINA-W152

EVK-NINA-W1/EVK-NINA-B2 - User guide

UBX-17011007 - R07 Contact Page 23 of 23

Contact For complete contact information, visit us at www.u-blox.com.

u-blox Offices

North, Central and South America

u-blox America, Inc.

Phone: +1 703 483 3180

E-mail: [email protected]

Regional Office West Coast:

Phone: +1 408 573 3640

E-mail: [email protected]

Technical Support:

Phone: +1 703 483 3185

E-mail: [email protected]

Headquarters

Europe, Middle East, Africa

u-blox AG

Phone: +41 44 722 74 44

E-mail: [email protected]

Support: [email protected]

Asia, Australia, Pacific

u-blox Singapore Pte. Ltd.

Phone: +65 6734 3811

E-mail: [email protected]

Support: [email protected]

Regional Office Australia:

Phone: +61 2 8448 2016

E-mail: [email protected]

Support: [email protected]

Regional Office China (Beijing):

Phone: +86 10 68 133 545

E-mail: [email protected]

Support: [email protected]

Regional Office China (Chongqing):

Phone: +86 23 6815 1588

E-mail: [email protected]

Support: [email protected]

Regional Office China (Shanghai):

Phone: +86 21 6090 4832

E-mail: [email protected]

Support: [email protected]

Regional Office China (Shenzhen):

Phone: +86 755 8627 1083

E-mail: [email protected]

Support: [email protected]

Regional Office India:

Phone: +91 80 405 092 00

E-mail: [email protected]

Support: [email protected]

Regional Office Japan (Osaka):

Phone: +81 6 6941 3660

E-mail: [email protected]

Support: [email protected]

Regional Office Japan (Tokyo):

Phone: +81 3 5775 3850

E-mail: [email protected]

Support: [email protected]

Regional Office Korea:

Phone: +82 2 542 0861

E-mail: [email protected]

Support: [email protected]

Regional Office Taiwan:

Phone: +886 2 2657 1090

E-mail: [email protected]

Support: [email protected]


Top Related