ENI 750 BILL OF MATERIAL UNIT S/N__________

DESCRIPTION MANUFACTURER PART NO.QTY/U

NIT CERTIFICATIONS S/NKATOLIGHT PROVIDED MATERIALEngine/Generating Set Katolight ENRD750FRY4 1Generator Marathon 573RSL4032 1 UL, CSADigital Voltage Regulator Marathon DVR2000E 1 ULR, CSA, CEGovernor System Barbar Colman DYN1-10656-000-0-24 1Digital Genset Controller Katolight KDGC-2000 1 ULR, CSACircuit Breaker Katolight TKMA322100WL 1 UL, CSABattery Rack Katolight 204-169 1 N/AWater Heater Katolight CL140210-000 2 CSA

ALPHA PROVIDED MATERIALENCLOSURE

Outdoor Sound Enclosures (60 & 69 dBA) Alpha Power Systems N/A 1Exhaust SystemSilencer Style 1 EM Products DHK, 12"x86"DIAx22"H 1 N/ASilencer Style 2 EM Products DHK, 12"x86"DIAx22"H 1 N/AFlex Connector EM Products FL10-19MIT-08 1 N/ASilencer Outlet Extension EM Products EXT-12-24 1 N/ARain Cap EM Products RC-000646 1 N/ARain Guard EM Products RGS-12 1 N/ABolts, Nuts and Gasket EM Products BNG-10 1 N/AMisellaneousBolts, Nuts and Gasket EM Products BNG-12 1 N/AVibration Mounts Isolation Technology CK2-S8-2600 10 N/ASheet Metal Wall Panels Wymore as req'd N/ASheet Metal Roof Beams Wymore as req'd N/A4.0" x 4.0" Square Structural Channel as req'd N/A2.0" x 2.0" x 0.25 Angle Iron as req'd N/APerforated Steel Liner Sheets as req'd N/AWall and Ceiling Insulation - 4" Thinkness as req'd N/AFixed Louver - Intake Ventex 2435-4 78"W x 96"H x 4"D 1 N/AFixed Louver - Exhaust Ventex 2415-4 78"W x 96"H x 4"D 1 N/AMotorized Dampers Ventex Model 3160 78"W x 96"H x 4"D 2 N/ADamper Motors Belimo AF120 4 UL, CSA N/ADamper Hardware Belimo 4 N/ASound Attenuator Packs Kinetics 78"W x 96"H x 72"D 2 N/ASound Attenuator Packs (add for 60 dBA) Kinetics 78"W x 96"H x 36"D 2 N/A14 and 12 Gauge Sheet Galvaneal N/ASub-base Fuel Tank(w/NYC cert.) Sauk Technologies UCTSC-1100 1 UL, NFPA, NYC N/AFuel level switches Gems LS1700 3 URFuel fill alarm box APS 1Nuts, Bolts and Screws as req'd N/A

CERTIFICATION CODESUL - UL LIsted Component, ULR - UL Recognized Component, CSA - CSA Certified Component, CE - CE Marked Component, NYC - meets NYC code, NFPA - meets NFPA code

ENI 750 BILL OF MATERIAL UNIT S/N__________

DESCRIPTION MANUFACTURER PART NO.QTY/U

NIT CERTIFICATIONS S/NPiping and Fittings as req'd N/AFill Cap 1 N/AHigh Pressure Hose and Swag Fittings as req'd N/ADoor Handles and Fittings as req'd N/A6" pressure relief vent cap Sauk Technologies 2160 2

ELECTRICAL HARDWARE

Load Center, Class 1130, Indoor, 25KAIC, 125 AF Main Breaker, 120/208 VAC SQ D QO330MQ125 1 UL

22 KAIC, 15A, 3P Breaker SQ D QO315VH as req'd UL, CSA N/A22 KAIC, 20A, 3P Breaker SQ D QO320VH as req'd UL, CSA N/A22 KAIC, 30A, 3P Breaker SQ D QO330VH as req'd UL, CSA N/A22 KAIC, 15A, 1P Breaker SQ D QO115VH as req'd UL, CSA N/A22 KAIC, 20A, 1P Breaker SQ D QO120VH as req'd UL, CSA N/ASeal Tight Conduit and Fittings as req'd N/ARigid Conduit and Fittings as req'd N/AI-Beam Conduit Hanger as req'd N/ATerminal Blocks Wago as req'd N/AEnd Plates Wago as req'd N/AJumpers Wago as req'd N/A Earth/Gnd Terminal Blocks Wago as req'd N/ASticky Blocks as req'd N/AStart/Control Battery Battery Plus 8DA 4 N/ABattery Charger Sens FC-24-20-2031U 1 ULBattery Box NOCO Marine HM484 4Male Battery Terminal, Crimp Style as req'd N/AFemale Battery Terminal, Crimp Style as req'd N/ACamlock Connector, Female, Set Screw Camlock Crouse-Hinds E1016-1700, BLK, PHA 4 UL, CSA N/ACamlock Connector, Female, Set Screw Camlock Crouse-Hinds E1016-1702, RED, PHB 4 UL, CSA N/ACamlock Connector, Female, Set Screw Camlock Crouse-Hinds E1016-1705, WHT, PHC 4 UL, CSA N/ACamlock Connector, Female, Set Screw Camlock Crouse-Hinds E1016-1700, BLU, NEUT. 4 UL, CSA N/ACamlock Connector, Female, Set Screw Camlock Crouse-Hinds E1016-1704, GRN, GND. 4 UL, CSA N/ACamlock Connector - Cover Camlock Crouse-Hinds A-100602-1 1 N/AInterior lights, switches, and receptacles as req'd N/APower Cable General Cable as req'd UL, CSA N/AOther control & electrical wire as req'd per NEC code N/A

CERTIFICATION CODESUL - UL LIsted Component, ULR - UL Recognized Component, CSA - CSA Certified Component, CE - CE Marked Component, NYC - meets NYC code, NFPA - meets NFPA code

D750F*Y4 680 kW @ 60 Hz. Prime Power

► Katolight’s commitment to quality has been an industry standard since 1952

► Katolight specializes in custom designing any application to meet the most difficult specifications

► Each and every unit is factory tested. This can eliminate costly startup and installation delays

► Katolight supplies a broad range of accessories to match any requirement worldwide

► Katolight generator sets come standard with a 2 year, 1500 hour limited warranty

► Optional warranty periods are also available, contact factory for details

► This model accepts 100% of nameplate rating, per NFPA 110

► This engine is EPA Tier I certified

750 kW @ 60 Hz. Stand-By Power

D750FRY4_05-05

Diesel T1

Model # Volts Hz Phase Power Factor

Standby Ratings Prime Ratings Connection

Amps kW/kVA Amps kW/kVA

D750FRY4 277/480 60 3 0.8 1128 750/937.5 1022 680/850 12 LEAD HI WYE

D750FPY4 120/208 60 3 0.8 2255 750/937.5 2045 680/850 12 LEAD LOW WYE

D750FJY4 120/240 60 3 0.8 2602 750/937.5 2359 680/850 12 LEAD HI DELTA

D750FNY4 347/600 60 3 0.8 902 750/937.5 818 680/850 4 LEAD WYE

D750F*Y4 DIESEL Gen-Set

CONTROL PANEL

� Model #45 control panel

� AC voltmeter, 3 ½”, 2% accuracy

� AC ammeter, 3 ½”, 2% accuracy

� Combination VM/AM selector switch, 4 position

� Frequency meter, 3 ½”, 55-65 Hz.

� Vibration shock mounts (4)

� Engine control - KASSEC-24 VDC, with cyclic cranking timer

� 4 engine shutdowns with separate failure lights

∗ High water temperature

∗ Low oil pressure

∗ Engine overspeed

∗ Engine overcrank

� Engine gauges - 2"

∗ Battery voltmeter

∗ Water temperature

∗ Oil pressure

∗ Running time meter - 5 digits

� 3 position mode switch (auto-off-manual)

ENGINE

� Air cleaner

� Oil pump

� Full flow oil filter

� Jacket water pump

� Thermostat

� Exhaust manifold – dry

� Blower fan & fan drive

� Radiator - unit mounted

� Vibration isolators - pad type

� Electric starting motor - 24V

ENGINE (cont.)

� Governor – Electric Isochronous

� Base - formed steel

� Flywheel & Enclosure

� Charging alternator - 24V

� Battery box & cables

� Flexible fuel & exhaust connectors

� EPA Certified Engine

GENERATOR

� A.C. Generator

� Brushless design

� Single bearing

� Direct connection with flex plate

� Class H insulation

� All models manufactured to meet NEMA MG1- 22.4 and CSA standards

� Telephone influence factor is well within NEMA standards

� Wave form deviation factor is no more than 5%, well within NEMA standards

� Harmonic content is 3.0% maximum

� Permanently lubricated ball type bearings

� Generator is self-ventilated

� Drip-proof construction

VOLTAGE REGULATOR

� Voltage adjust rheostat

� EMI filter (Internal Electromagnetic Interference)

� Underspeed protection

� Overexcitation protection

� Fully encapsulated

� Regulation - ±0.25%

Drawing above for illustration purposes only, based on standard open power 480 volt generator. Lengths may vary with other voltages.

STANDARD EQUIPMENT

D750F*Y4 Diesel Gen-Set

ENGINE TECHNICAL DATA 60 Hz Model:.................................................................................................................... S12A2-Y1PTA-1 Type: ............................................................................................................................ 4-Cycle Aspiration: ......................................................................................................Turbocharged Aftercooled Cylinder Arrangement: (Number, inline, V, etc.) ...............................................................12-V Displacement - Cu. In. (lit) .........................................................................................2,071 (33.9) Bore - in. (cm) x stroke - in. (cm)....................................................................... 5.91 (15.0) x 6.3 (16.0) Compression Ratio: ....................................................................................................... 15.3:1 Rated RPM..................................................................................................................... 1800 Rating Standby Prime BMEP: psi (kPa) .............................................................................256 (1,765) ............................................234 (1,613) Maximum Power at Rated RPM - bhp(kW)......................................1,207 (900) ............................................1,099 (820)

INSTALLATION DATA * Exhaust System

Gas Temp. (Stack): °F (°C) .................................................. 820 (438) ................................................686(363) Gas Volume at Stack Temp.: CFM (m3/min)................................7,353 (208) ............................................6,980 (198) Maximum Allowable Back Pressure: in. H20 (kPa)........................................... 23.6 (5.9)............................................... 23.6 (5.9)

Cooling System Ambient Capacity of Radiator: °F (°C)........................................ 100 (38) ................................................. 100 (38) Maximum Allowable Static Pressure on Rad. Exhaust: in. H2O (kPa)................................... 0.5 (0.12) ............................................... 0.5 (0.12) Water Pump Capacity: gpm (lit/min)............................................291 (1,100) ............................................291 (1,100) Heat Rejection to Coolant: BTUM (kW).......................................33,740 (593)...........................................29,987 (527) Heat Radiated to Ambient: BTUM (kW)........................................7,316 (129) ............................................6,481 (114)

Air Requirements Aspirating: CFM (m3/min) ....................................2,912 (82) ..............................................2,600 (74) Air Flow Required for Rad. Cooled Unit: CFM (m3/min)................................. 40,267 (1,140) ....................................... 40,267 (1,140) Air Flow Required for Heat Exchanger/Remote Rad. based on 20°F Rise: CFM (m3/min).................................20,322 (575)...........................................18,003 (510)

Fuel Consumption: At 100% of Power Rating: gal/hr (lit/hr)....................................64.9 (246) ..............................................59.8 (226)

At 75% of Power Rating: gal/hr (lit/hr)....................................49.8 (189) ..............................................45.7 (173) At 50% of Power Rating: gal/hr (lit/hr)....................................33.1 (125) ..............................................31.6 (120)

Sound Level Data ■ Sound level at: Full Load No Load Full Load No Load 23 ft (7m) opu w/ critical grade muffler (dBA) .......................92 ................................ 90 .............................91 ........................ 90 23 ft (7m) Sound Attenuated Enclosure (dBA) .....................88 ................................ 86 .............................87 ........................ 86

Dimensions & Weight Length: in. (cm).......................................................155 (394) Width: in. (cm) .........................................................63 (160) Height: in. (cm) .........................................................83 (211) Weight (dry): lb. (kg) ........................................ 13,550 (6,146)

Liquid Capacity Total oil system: gal (lit) ...........................................31.7 (120) Engine jacket water capacity: gal (lit) .......................26.4 (100) System coolant capacity: gal (lit).................................68 (257)

Electrical System Electric volts DC .................................................................. 24 Cold cranking Amps under 0°F (-17.8°C) ........................................................ 1,250

Fuel System Fuel Supply Connection Size: ................................. 3/4” NPT Fuel Return Connection Size: ................................. 3/4” NPT Maximum Fuel Lift: ft (m) ............................................. 3 (1) Recommended Fuel:.............................................Diesel #2 Total Fuel Flow: gal/hr (lit/hr).................................166 (630) Remote Radiator System Connection sizes: Jacket water radiator inlet in. (cm)...........................4 (10.2) Jacket water radiator outlet in. (cm) .........................4 (10.2) Static head allowable above engine: ft H2O (kPa) ..................................32.8 (98)

*Installation data based on 480 volt, 60 HZ. application and open power unit.

■ For sound level readings with other enclosures, please contact factory.

Sound level data acquired per Test Method SAE J1074. Installation factors and site conditions can affect sound levels. Deration Factor: Altitude: Derate: 2.5% per 984 ft (300m) above 4,921 ft (1,500 m). Temperature: Derate: 4% per 18oF (10oC) above 104oF (40oC)

Control Panel ** NOTE: #45 series control panel is standard on all units,

see page 2 of spec sheet for standard features. o Model #45 Series Control Panel Options

o Emergency stop button o Alarm buzzer with silencing switch o Auxiliary relay for dry contacts (2 max.) o A separate low water level light is optional o Hooded panel lights (2) and on/off switch o NEMA 12 Panel Face o Additional LED lights (4 max.) One or two of the following conditions may be indicated:

□ unit not in auto □ low fuel level □ low water level □ low water temp. □ EPS supplying load □ pre-alarm oil □ pre-alarm temp. □ charger malfunction

o Model #50 Series Control Panel STANDARD FEATURES: same as #45 series control panel except for these added features:

o Hooded panel lights (2) and on/off switch o 4 Engine shutdowns o 12 light engine control package meeting NFPA-

110 requirement o Repetitive alarm buzzer and silencing switch o Light and alarm press to test

#50 SERIES OPTIONS o Emergency stop button o Additional space for one 31/2 meter o Auxiliary relay for dry contacts (2 max.) o A separate low water level light is optional o Additional LED lights (4 max.) One to four additional conditions may be indicated: customer to specify o NEMA 12 Panel Face

o Model #60 and #80 Series Custom Control Panels It may be necessary to use a 60 or 80 series control

panel on certain units where numerous options are required.

o Microprocessor Control Panel – KDGC

GEN-SET OPTIONS Cooling System

o Remote Radiator o High Ambient Radiator o Heat exchanger Cooling o Radiator Duct Flange

Fuel System o Fuel Water Seperator o Day Tank o Above Ground Fuel Tank o Auxillary Fuel Pump o Sub-Base mounted Fuel Tank

o Single Wall o Double Wall o UL Listed

Exhaust System o Residential Grade Muffler o Critical Grade Muffler o Hospital Grade Muffler o Rain Cap

Engine Electrical System

o Battery o Lead-Acid o Nicad

o Battery Warmer Plate o Battery Rack o Battery Charger

o Automatic o Trickle o Mounted & Wired

Generator o Main Line Circuit Breaker

o Shunt trip o Auxiliary switch

o PMG Excitation & DVR 2000 Regulator o Space Heaters 120/240 volt o Special Testing o Additional Temperature Rise Generators Available (80°C, 105°C, & 130°C)

Additional Optional Equipment o Spring vibration isolators o Oil Drain Extension o Enclosures

o Sound Attenuated o Weather Proof o Aluminum o Interior lights AC or DC o Floor Plate

o Jacket Water Heater o Crankcase Oil Heater o Trailer Mounting o Remote Annunciator o 12 Light Annunciator

o Flush Mounted o Surface Mounted o 4 additional lights, if needed

o Export Boxing o Warranties

o 2 Year o 5 Year

o Operating instructions under plexi-glass o Service indicator light

D750F*Y4 Diesel Gen-Set

Materials and specifications subject to change without notice.

© Katolight Corporation. 100 Power Drive, Mankato, MN 56001

Toll Free: 800-325-5450

www.katolight.com

DISTRIBUTED BY:

pdfMachine by Broadgun Software - a great PDF writer! - a great PDF creator! - http://www.pdfmachine.com http://www.broadgun.com

Section 6000

Page 53

MODEL : 573RSL4032BASE MODEL: 573RSL4032 Winding H-SG 570075

Submittal Data: 480 Volts*, 700 kW, 875 kVA, 0.8 P.F., 1800 RPM, 60 Hz, 3 Phase 10/23/2001

Kilowatt ratings at 1800 RPM 60 Hertz 10 LEADS Standard 3 phase

kW (kVA) 3 Phase 0.8 Power Factor Dripproof or Open EnclosureClass B Class F Class H

Voltage*

80º C !"!"!"!"Continuous

90º C !!!!Lloyds

95º C !!!!ABS

105º C British

Standard

105º C Continuous

130º C !!!!Standby

125º C British

Standard

125º C Continuous

150º C !!!!Standby

480/240 570 (713) 625 (781) 645 (806) 680 (850) 680 (850) 700 (875) 695 (869) 700 (875) 765 (956)460/230 595 (744) 645 (806) 655 (819) 700 (875) 700 (875) 730 (913) 715 (894) 730 (913) 785 (981)440/220 595 (744) 635 (794) 640 (800) 680 (850) 680 (850) 730 (913) 715 (894) 725 (906) 765 (956)416/208 570 (713) 600 (750) 610 (763) 645 (806) 650 (813) 700 (875) 685 (856) 685 (856) 725 (906)380/190 525 (656) 555 (694) 560 (700) 595 (744) 595 (744) 595 (744) 595 (744) 595 (744) 595 (744)

! Rise by resistance method, Mil-Std-705, Method 680.1b. British Standard Rating per BS 5000

Submittal Data: 480 Volts*, 700 kw, 875 kVA, 0.8 P.F., 1800 RPM, 60 Hz, 3 Phase STD. CONNECTIONMil-Std-705B Mil-Std-705B

Method Description Value Method Description Value301.1b Insulation Resistance >1.5 Meg 505.3b Overspeed 2250 RPM302.1a High Potential Test 507.1c Phase Sequence CCW-ODE ABC

Main Stator 2000 Volts 508.1c Voltage Balance, L-L or L-N 0.20%Main Rotor 1500 Volts 601.4a L-L Harmonic Maximum - Total 5.0%Exciter Stator 1500 Volts (Distortion Factor)Exciter Rotor 1500 Volts 601.4a L-L Harmonic Maximum - Single 3.0%PMG Stator 1500 Volts 601.1c Deviation Factor 5.0%

401.1a Stator Resistance, Line to Line --- TIF (1960 Weightings) < 50High Wye Connection 0.0074 Ohms --- THF (IEC, BS & NEMA Weightings) < 2 %Rotor Resistance 0.472 Ohms 652.1a Shaft Current < 0.1 maExciter Stator 23 OhmsExciter Rotor 0.045 Ohms --- 0.03 mfdPMG Stator 2.1 Ohms

410.1a No Load Exciter Field Amps 0.65 A DCat 240/480 Volts Line to Line Additional Prototype Mil-Std Methods

420.1a Short Circuit Ratio 0.489 are Available on Request.421.1a Xd Synchronous Reactance 3.09 p.u. -- Generator Frame 573

0.814 ohms -- Type422.1a X2 Negative Sequence React. 0.217 pu -- Insulation Class H

0.057 ohms -- Coupling - Single Bearing Flexible423.1a X0 Zero Sequence Reactance 0.058 pu -- Amortisseur Windings Full

0.015 ohms -- Excitation425.1a X'd Transient Reactance 0.153 pu -- Voltage Regulator DVR2000

0.04 ohms -- Voltage Regulation 0.25%426.1a X''d Subtransient Reactance 0.132 pu

0.035 ohms-- Xq Quadrature Synch. React. 1.25 pu -- Cooling Air Volume 1400 CFM

0.329 ohms427.1a T'd Transient Short Circuit -- Heat rejection rate 2379 Btu's/min

Time Constant 0.127 sec. 428.1a T''d Subtransient Short Circuit -- Full load current 1052 amps

Time Constant 0.009 sec.430.1a T'do Transient Open Circuit -- Minimum Input hp required 994.4

Time Constant 1.67 sec. 94.4%432.1a Ta Short Circuit Time

Constant of Armature Winding 0.015 sec. -- Full load torque 2900 Lb-ft

(3) Excitation support system or PMG required to sustain short circuit currents. Data rev. : 06/01/92* Voltages refer to wye (star) connection, unless otherwise specified. Version : 2001.2

GENERATORSMARATHON ELECTRIC

TYPICAL SUBMITTAL DATA

Efficiency at rated load :

Ext. Voltage Regulated, Brushless

MAGNAMAXDVR

Main Stator Capacitance to ground

Section 6000

Page 54

TYPICAL DYNAMIC CHARACTERISTICSMODEL : 573RSL4032

BASE MODEL: 573RSL4032 Winding H-SG 570075Submittal Data: 480 Volts*, 700 kW, 875 kVA, 0.8 P.F., 1800 RPM, 60 Hz, 3 Phase

Data Rev. 06/01/92 Version: 2001.2

GENERATORS MARATHON ELECTRIC

Efficiency at rated voltage and frequency vs. load kw

90.0%

91.0%

92.0%

93.0%

94.0%

95.0%

96.0%

97.0%

0 100 200 300 400 500 600 700 800 900kW Output

.8 pf 1.0 pf

Voltage dip with motor starting

0%5%

10%15%20%25%30%35%40%

0 500 1000 1500 2000 2500 3000Locked rotor kva

Percent dip

Load application

0%

10%

20%

30%

0 200 400 600 800 1000kW

% V

olta

ge D

ip

0

1

0 200 400 600 800 1000Rec

over

y tim

e /

sec.

Load rejection

0%

10%

20%

30%

0 200 400 600 800 1000kW

% V

olta

ge D

ip

0

1

0 200 400 600 800 1000Rec

over

y tim

e /

sec.