DIY Jewelry Making Accessories-Handmade Bead Jewelry Bangle
I’m always looking for handmade bead jewelry with an
energetic and vivid summer palette, so I chose these
yellow beads as the main color for my DIY jewelry
making accessories. What’s more, for the sake of a
more comfortable piece to wear, I made use of nylon
wire besides the necessary beads and clasps. You guys
will actually go crazy about it.
Supplies for this handmade bead jewelry:
8mm Acrylic Pearl Bead
6mm & 4mm Bicone Glass Bead
3mm Round Seed Bead
Crimp Bead
Iron Bead Tip
Lobster Claw Clasp with ending chain
0.5mm Nylon Wire
Round Nose Plier
Flat Nose Plier
Side Cutting Plier
How to make this DIY jewelry making accessories?
Step 1: work a beaded strand
1. Snip an 80cm long wire. Thread a crimp bead to the
center of the wire, and then pass the two ends together
through the bead tip. Flatten the crimp bead and close
the bead tip.
2. Slide one 4mm Bicone Glass Bead onto the two ends.
3. Separate the two ends, on the left end add one 8mm
Acrylic Pearl Bead, then on the right end add the beads
as follows: 3mm Seed Bead x3, 6mm Bicone Glass
Bead x1 and 3mm Seed Bead x3. Finally, cross two
ends through another piece of 3mm Seed Bead.
4. Exchange the added bead group for two ends and
then cross at one extra seed bead.
Want to learn some new methods to whip up creative DIY jewelry making accessories? Here, make a
handmade bead jewelry bangle in one hour or less with the help of this tutorial.
5. Do the above two beaded patterns alternatively for
the desired length.
6. Lead the two ends through one 4mm Bicone Glass
Bead. Slide on the bead tip and then secure with a
crimp bead as before.
7. Cut off the remaining wires.
Step 2: make the bangle
1. Take a 50cm long nylon wire.
2. Affix the wire through one of the
beginning4mm Bicone beads. Take the rest of
the wire and pass through the 6mm Bicone
Glass Beads one after one. Leave the wire as is.
3. When finished passing though all beads on
the edges, tie a knot at the end.
4. Tuck the ends of the wire in the adjacent 2
or 3 beads and remove any excess parts.
Step 3: add on clasp
Attach the two parts of the clasp onto the ends. See, here is your handmade bead jewelry!
This is my handmade bead jewelry bangle, so simple but gorgeous, right? All in all, simply be
aware of the trends and let them provide you with more inspirations for your DIY jewelry making
accessories. Enjoy trying out this design!
Search for array of beads and charms please click:
http://www.pandahall.com/