Download - Diy bracelet sailor’s rope bracelet tutorial
DIY bracelet- sailor’s rope bracelet tutorial
In our rope bracelet tutorial, we present very detailed
decomposition for every step. Even without wordy
description, you can figure out and master the basic
skill about this DIY bracelet. It will take a little bit
longer time than average bracelet.
Materials and tools:
Cylinder
Scissors
Rope
Tape
Instructions:
Step 1: gain the basic braiding way
1st, tape one end of rope to cylinder with leaving 7 cm
tails;
2nd, wrap rope around cylinder and form an X shape;
3rd, thread rope from left side through under right
upper arm of the X;
4th, pull rope to leftmost side;
5th, create another X;
6th, thread rope through under the left upper arm of
the X;
7th, pull rope to right side.
This rope bracelet tutorial is to teach you a fast-to-learn way about DIY bracelet merely with rope and
cylinder.
So the rope bracelet tutorial is done here! If you want the DIY bracelet more unique and
distinguished, you might as well try to combine rope with bead trim together, making a brief and
neat weaving pattern.
Master more types of friendship bracelets making idea please click:
http://www.pandahall.com/learning-center/Friendship-Bracelets/grid-17-p1.html
Step 2: continue to finish the
double layered braiding
1st, roll the cylinder forward and repeat above
step to complete the first layer of braiding;
2nd, continue to make another pass to create a
second layer of braiding.
Step 3: finalize the DIY bracelet
Tie a granny knot at the ends of rope.