Transcript

construction catalogue

Bolsters & Chisels

Hammers

Slater’s Ripper

Trowels & Floats

Mixers

Plumb Bob

Lines & Pins

Plumbing Tools

Glazing Tools

building, plumbing &decorating tools

power tool accessories 64

watering systems

retailer information

alphabetical / numerical index

terms and conditions 102

tool systems

saws and woodworking 50

56

general tools & measuring 40

building, plumbing & decorating tools

electrical tools 22

30

pliers and cutters 14

screwdrivers

contents

06

05

94

86

92

Featuring new Antivibration hammers, the C.K range of quality, professional specification

tools have been developed to get the job done. Uncompromising quality standards underpin

the high performance of our building, plumbing and decorating products.

build

ing,

plum

bing

& d

eco

rati

ng t

oo

lsbuilding,plum

bing & deco

rating too

ls

32 33

item number length width

T3088 250mm 10˝ 25mm 1˝

An angled grooved cutting edge to remove mortar from between bricks.Octagonal shank. Sold loose.

plugging chisel 3088

item number length blade width

T3087 3 230mm 9˝ 75mm 3˝

T3087 4 230mm 9˝ 100mm 4˝

T3087S 3 230mm 9˝ 75mm 3˝

T3087S 4 230mm 9˝ 100mm 4˝

Octagonal shank. Suitable for bricks and composite blocks.T3087S with impact absorbing, protective rubber grip. Sold loose.

brick bolster chisel 3087

item number length blade width

T3086 225mm 83/4˝ 55mm 21/4˝

T3086S 225mm 83/4˝ 55mm 21/4˝

Narrow octagonal shank design to suit the needs of the electrician.T3086S (shown) with impact absorbing, protective rubber grip. Sold loose.

electrician's bolster 3086

item number length width

T3383 06 150mm 6˝ 12mm 1/2˝

T3383 08 200mm 8˝ 19mm 3/4˝

T3383 10 250mm 10˝ 19mm 3/4˝

T3383 101 250mm 10˝ 25mm 1˝

T3383 12 300mm 12˝ 25mm 1˝

T3383 18 460mm 18˝ 19mm 3/4˝

Octagonal shank, suitable for brick, concrete and small section steel.Sold loose.

cold chisel 3383

itemnumber quantity description

T4211/1 10 25mm / 1˝ scutch combs

T4211/2 10 25mm / 1˝ scutch droves

T4211/3 10 38mm / 11/2˝ scutch combs

T4211/4 10 38mm / 11/2˝ scutch droves

Wallet of 10 spare combs or chisel bits.

spare comb / chisel bits 4211

item number size (mm / inch)

406001 25mm 1˝

406002 38mm 11/2˝

High quality carbon steel Scutch chisel supplied complete with comb bit.

scutch chisel 3091

item number weight of head

T4219 40 1135g 21/2lb

T4219 64 1816g 4lb

Drop forged high carbon steel head fully hardened and tempered.Ground and polished striking faces. Genuine hickory handle. Sold loose.

club hammer 4219

item number description

T4234 chisel and point

Drop forged high carbon steel head, hardened and tempered.Chrome plated tubular steel shaft with comfort grip. Sold loose.

mortar pick - chisel and point 4234

item number weight of head

T4232 16 454g 16oz

T4232 20 568g 20oz

Drop forged high carbon steel head, hardened and tempered. Keen, toughcutting edge with accurately ground and bevelled face. Chrome plated tubularsteel shaft with C.K comfort rubber grip. Sold loose.

brick hammer 4232

item number weight of head

T421808 3.63kg 8lb

T421812 5.44kg 12lb

A heavy, long handled version of the club hammer.Used mainly for building work. Both striking faces are precision ground,hardened & heat treated to help withstand the heavy applications.The 33˝ fibreglass shaft has a rubber collar which also absorbs the shock/impact of the blows & reducing transmission to the user.

fibreglass sledge hammers 4218

itemnumber weight description

357005 3lb one piece club hammer

Single piece steel shaft/head component forged from SAE 1055 fine graincarbon steel, hardened and tempered. Plastic moulded grip with TPE soft gripovermould.The handle is moulded onto the shaft for security.

anti vibration forged club hammer 5703

item number weight of head

T4219A 10 1000g 21/4lb

T4219A 15 1500g 31/2lb

Drop forged high carbon steel, fully hardened and tempered.Head black lacquered, ground and polished striking faces.Ash handle. Head secured by ring wedge.

club hammer 4219

chisels & bolstersRange of quality chisels manufactured fromthe finest materials, correctly hardened andtempered to British Standard 3066. Superiorpowder coated finish with ground cuttingedge. Chamfered and ground striking end foradded safety.

hammersDesigned to last, for light, heavy andspecialist applications alike.

build

ing,

plum

bing

& d

eco

rati

ng t

oo

lsbuilding,plum

bing & deco

rating too

ls

34 35

item number size description

T527010 255mm 10˝ broad heel brick trowel

T527011 275mm 11˝ broad heel brick trowel

Forged tang welded to hardened & tempered blade. Half tanged to hardwoodhandle.Taper ground & lacquered blade. Steel ferrule. Display packed.

broad heel brick trowel 5270

item number size

T529750 175 x 13mm 7 x 1/2˝

Professional quality. Flexible, hardened & tempered, taper ground blade.Comfortable, soft grip handle with finger guard. Display packed.

finger and jointing trowel 529

item number size description

T529606 150mm 6˝ pointing trowel

Hardened & tempered blade welded to heavy duty tang for strength &durability. Unique asymmetric shape, one curved edge & one straight forintricate, fine finishing. Comfortable, soft grip handle with integral finger guard.Display packed.

pointing trowel 529

item number size description

T529510 255mm 10˝ broad heel brick trowel

High carbon steel blade welded to heavy duty tang for strength & durability.Comfortable, soft grip handle with integral finger guard. Display packed.

broad heel brick trowel 529

item number size description

T5273 125mm 5˝ margin trowel

High carbon steel blade welded to heavy duty tang.Traditional wooden handle.Parallel edges for borders & working in confined spaces Display packed.

margin trowel 5273

item number size description

T527207 175mm 7˝ gauging trowel

Welded tang. Hardened & tempered, taper ground blade.Half tanged to hardwood handle. Steel ferrule. Display packed.

gauging trowel 5272

item number size description

T5060 4 100mm 4˝ pointing trowel

T5060 5 125mm 5˝

T5060 6 150mm 6˝

Welded tang. Hardened & tempered, taper ground blade.Half tanged to hardwood handle. Steel ferrule. Display packed.

pointing trowel 5060

itemnumber size description

T527111 275mm 11˝ philadelphia pattern brick trowel

Forged tang welded to hardened & tempered blade. Half tanged to hardwoodhandle.Taper ground & lacquered blade. Steel ferrule. Display packed.

philadelphia pattern brick trowel 5271

itemnumber size description

T524306 150mm 6˝ pointing trowel

Stainless steel, non-marking blade.Will not rust. Display packed.

pointing trowel - stainless steel 5243

itemnumber size description

T524207 175mm 7˝ gauging trowel

Stainless steel, non-marking blade.Will not rust. Display packed.

gauging trowel - stainless steel 5242

itemnumber size description

T524111 280mm 11˝ philadelphia pattern brick trowel

Stainless steel, non-marking blade.Will not rust. Display packed.

philadelphia pattern brick trowel - stainless steel 5241

item number blade length blade width

T5073 37 175mm 7˝ 10mm 3/8˝

T5073 50 13mm 1/2˝

T5073 62 16mm 5/8˝

T5073 75 19mm 3/4˝

T5073 99 25mm 1˝

T5073 1 13mm 1/2˝

Professional quality. Flexible, hardened & tempered, taper ground blade.Half tanged to hardwood handle. Steel ferrule.T5073 1 with half round blade.Display packed.

finger trowel 5073

item number size description

T529311 280mm 11˝ brick trowel

High carbon steel blade welded to heavy duty tang for strength & durability.Comfortable, soft grip handle with integral finger guard. Display packed.

philadelphia pattern brick trowel 529

item number size description

T529207 180mm 7˝ gauging trowel

Hardened & tempered blade welded to heavy duty tang for strength &durability. Comfortable, soft grip handle with integral finger guard.Display packed.

gauging trowel 529

item number description

T5180 slater’s ripper

Spring steel for ease of use. Lacquered finish with polished tip.Sold loose.

slater’s ripper 5180

building trowelsSoft grip, traditional and stainless steelranges to suit every professional.

build

ing,

plum

bing

& d

eco

rati

ng t

oo

lsbuilding,plum

bing & deco

rating too

ls

36 37

item number size

T5068 280 x 120mm / 11 x 43/4˝

Top quality. Extra thin (0.65mm/23 B.W.G.) flexible, polished blade.Handle mounting is securely fastened by spot welded pins. Steel is tangedthrough poplar wood handle to fixing nut. Display packed.

finishing trowel 5068

item number size

T5298 280 x 120mm / 11 x 43/4˝

Professional quality, lightweight plasterers trowel with carbon steel blade.Tang securely fastened by spot welded pins. Soft grip, banana shaped handle.Display packed.

finishing trowel 529

item number length blade width

T5093 50 265mm 101/2˝ 13mm 1/2˝

T5093 62 265mm 101/2˝ 16mm 5/8˝

Trowel blade, hardened, tempered and ground to give correct flexibilityand balance. Display packed.

trowel and square tool 5093

item number size

T5198 13 x 16mm / 1/2 x 5/8˝

Fully hardened & tempered carbon steel. For finishing 13mm (1⁄2˝) & 16mm (5⁄8˝)mortar joints. Display packed.

brick jointer 5198

itemnumber size

T5264 405 x 115mm / 16 x 41/2˝

Pointed, carbon steel blade flooring trowel for easy access into corners.Wooden handle with double hang tang for balance in use. Used for applying &finishing concrete or cement floors. Display packed.

flooring trowel 5264

itemnumber size

T5069 300 x 300mm / 12 x 12˝

Aluminium blade with grooved, non-slip surface. Detachable plastic handle.Display packed.

plasterer’s hawk 5069

itemnumber size

T5299 330 x 120mm / 13 x 43/4˝

Extra large stainless steel finishing trowel with traditional, banana shapedwooden handle. Display packed.

finishing trowel - stainless steel 5299

itemnumber size

T5072 280 x 120mm / 11 x 43/4˝

Stainless steel, top quality trowel. Specification as T5068 but with thinner(0.6mm) Stainless Swedish steel blade. Display packed.

finishing trowel - stainless steel 5072

contact customer services on:Email: [email protected]

itemnumber size

T5172 280 x 140mm

T5172 18 320 x 180mm

Lightweight, moulded foam plastic with fine chequered working face.Durable and non-warping.Available in 2 sizes. Sold loose.

skimmer float 5172

itemnumber size

T5169 1 255 x 115mm / 103/4 x 41/2˝

T5169 2 255 x 115mm / 103/4 x 41/2˝

Polished carbon steel blade with welded polypropylene handle. Broad roundprofile notches, ideal for applying adhesive for floor tiles.T5169 2 with small round profile notches. Sold loose.

adhesive trowel 5169

itemnumber size

T5274 280 x 115mm / 11 x 41/2˝

Edging trowel with long curved edge, suitable for rounding off concrete corners.Steel blade with wooden handle securely fastened by 6 rivets. Display packed.

concrete edging trowel 5274

T5169 2 T5169 1

itemnumber size

T5097 165 x 165mm / 61/2 x 61/2˝

Heavy grade steel and ferruled hardwood handle. Ideal for pebble dashing and similar surface finishes. Sold loose.

harling trowel 5097

itemnumber size

T5173 280 x 140mm / 11 x 51/2˝

Lightweight, backing of moulded foam plastic with 20mm thick general purposesponge face, suitable for washing down grout. Sold loose.

sponge float 5173

itemnumber size

T5174 280 x 140mm / 11 x 51/2˝

Lightweight, durable handle bonded to dense rubber pad. Suitable for groutapplication. Sold loose.

grouting float 5174

build

ing,

plum

bing

& d

eco

rati

ng t

oo

lsbuilding,plum

bing & deco

rating too

ls

38 39

item number length description

T3520A 30m 100ft chalk line

Black lacquered die cast metal case with fold away winding handle.30m self chalking line with end support hook, 45° and 90° angle markings.Sold complete with 60g of chalk. Display packed.

chalk line 3520

item number weight description

T3492 11 300g 11oz plumb bob

Conical, fully polished cast iron plumb bob with screwed brass cord fitting.Sold loose.

plumb bob 3492

item number size description

T1881 420mm 161/2˝ power mixer

T1882 620mm 25˝

Manufactured from nickel plated steel. Suitable for use with electric drills atspeeds between 200 - 700 rpm depending on the material being mixed.Ideal for mixing paint, paste, adhesive, cement, screed, filling compounds, etc.Sold loose with descriptive card.

power mixer 1881/2

item number description

T1531 tile scriber

Tungsten carbide tipped, suitable for tiles, metal and glass.Pocket clip. Display packed.

tile scriber 1531

item number size description

T3490 170mm 61/2˝ line pins

Forged, nickel plated line pins, suitable for use in wet and dry mortar.Sold as a pair. Display packed.

line pins 3490

item number colour description

T3521B 100 blue chalk powder

T3521R 100 red

Container with 100g/4oz of chalk powder. Choice of two colours. Sold loose.

chalk powder 3521

item number length description

T3522 30m 100ft chalk line

30m of chalk line held in a lightweight thermoplastic case with winding handle.Supplied with 60g of chalk. Display packed.

chalk line 3522

T1882 T1881

item number size capacity

T2232 65mm 3-25mm

Adjustable mini pipe cutter with die cast, black lacquered body, hardened steelwheel and two flare groove rollers. Suitable for small bore pipes and those withan outside diameter up to 25mm (1˝). Fitted with replaceable C.K standardcutting wheel. For copper, brass, aluminium and thin walled steel pipes.Capacity: 3 - 25mm / 1⁄8 - 1˝. Display packed.

mini pipe cutter 2232

item number size capacity

T2231 145mm 3-30mm

Adjustable pipe cutter with die cast, black lacquered body, hardened steel wheeland two flare groove rollers.With burr remover in end piece. Supplied withreplaceable cutting wheel. For copper, brass, aluminium and thin walled steelpipes. Capacity: 3 - 30mm/1⁄8 - 11⁄8˝. Display packed.

pipe cutter 2231

item number size description

T3519 18m 60ft braided nylon chalk line

Single 18m/60ft hank. Display packed.

braided nylon chalk line 3519

item number size description

T3517 18m 60ft cotton chalk line

Single 18m/60ft hank. Display packed.

cotton chalk line 3517

order onlinewww.cki.uk.com

item number description

T5087 glass cutter

Professional quality glass cutter. 6 top quality wheels in turret head.Oiled felt washer for lubrication. Heavy nickel plated head. Lacquered handle.Display packed.

glass cutter 5087

item number size Ø description

T5082 320mm 123/4˝ double suction lifter

Lifted by one hand but with two lever operated suction pads, this tool is idealfor lifting and positioning heavier items such as refrigerators, large glass sheetsand other awkward objects. For heavier items two or more Double SuctionLifters can be used together.The heavy duty body is made of shock resistantplastic and the cups are made of natural rubber.

double suction lifter 5082

item number description

T4311 basin wrench

Square, telescopic pipe, length adjustable in 4 different positions betweenapprox 275 and 460mm total length. Sliding T-handle.Toothed, spring loadedself-adjusting forged steel jaws, swivelling by 180°. Display packed.

basin wrench 4311

60kg


Top Related