Download - Beast 3680 Especifications

WINTER - SPRING CATALOG 2007

BANDIT INDUSTRIES, INC.

MODELS 2680, 3680, 4680 & 5680

Simply the best machines for turning unwanted waste into valuable products such as landscape mulch, boiler fuel, animal bedding, hot mix asphalt

supplement (from shingles) and a raw material for pressed board.

LOCAL / INTERNATIONAL CALLS: 1-989-561-2270

• Break down big material faster, consuming less energy and fuel.• Produce a multitude of recycled products that command top dollar.• Recycle materials at the lowest possible cost.• Economical.• Easy to service, maintain, and operate.

WINTER - SPRING 2007 BEAST WASTE RECYCLER CATALOG | APPLICATIONS

Bandit’s Beast Recyclers process an amazing array of materials such as stumps; logs; brush; wet leaves; whole trees; landscape waste; pallets; railroad ties; telephone poles; housing demolition; sawmill, logging, chip mill and paper mill waste; plastic materials, including plastic car parts and European type refrigerators; lime cake; shingles and more.

The most important benefit of the Beast is the quality and uniformity of the end product. Breaking down materials by cutting, splitting or grinding provides a multitude of options for producing a desired end product. Various tooth options, screens of almost any size or shape and the ability to change the infeed conveyor’s feed speed allows you to produce material uniform in size and consistency to bring top dollar. Tool options controlling the cut, split or grind enable the Beasts to deliver the best mulch products, the most uniform raw material for pressed board, the most acceptable boiler fuel and the best hot mix asphalt supplement from shingles.

In fact, no other grinder will produce a hot mix asphalt supplement from shingles in a single pass without screening as well as the Beast. These cuttermills break down shingles, creating less heat than a conventional grinder, allowing you to grind shingles year round.

Bandit Beast® waste recyclersFOUR MACHINES...SO MANY POSSIBLEAPPLICATIONS!

SHINGLE WASTE

PALM WASTE

PALLET WASTE

CLEARING WASTE

Bandit Stump GrindersFeaturing eleven high-production stumpers, available both as towable and self-propelled models.

Bandit Hand-Fed ChippersThe original Brush Bandit® chippers: proven, rugged, simple machines that provide years of dependable service.

For additional information, ask for any of these Bandit catalogs!want to see live footage

of Bandit equipment?Request our FREE DVD!

Bandit Whole Tree ChippersUnique machines that quickly and efficiently convert whole trees into dimensional chips.

Bandit Multi-LineFeaturing our entire line of chippers, grinders and waste recyclers.

1

OvERvIEWPages 1 - 2

bEAST hEAd OPTIONSTwo head options to choose from: our patented beast cuttermill, and the new dragonheadPages 3 - 4

TEETh ANd OPTIONSIntroducing a new, highly durable line of beast teethPages 5 - 6

MAINTENANCE TIPS & UNIQUE FEATURESPages 7 - 8

SELF-PROPELLEd WASTE RECYCLERSThe ultimate landclearing machines, now on tracksPage 9

MOdEL 2680Compact and economically pricedPage 10

MOdEL 3680Our most popular beastPage 11

MOdEL 4680high-production, high-horsepowerPage 12

MOdEL 5680The ultimate waste reduction machinePage 13

COLOR CRITTER IIThe most economical way to make colored mulchPage 14

INdEX

QUESTIONS? COMMENTS?Bandit Industries, Inc. attributes

much of its success from listening to the suggestions of those who use their

equipment on a daily basis.

visit our website to locate an authorized bandit dealer in your area!

Have a question or comment for Bandit? Contact us by mail, telephone,

or via the Internet at any time.

bANdIT INdUSTRIES, INC.6750 Millbrook Road

Remus, MI 49430

TOLL FREE TELEPHONE(800) 952-0178

LOCAL / INTERNATIONAL(989) 561-2270

EMAIL: [email protected]: www.banditchippers.com

2

MULCH: In many parts of the United States, tree services are taking green waste with negative value and are making high quality mulch for about $3.50/cubic yard. The mulch then sells for $11-25/cubic yard. Now that’s a favorable return on investment!

BOILER FUEL: High oil costs are driving an increase in demand for wood energy. Our Beasts will help meet that demand by producing an ideal wood fuel product in a single pass with few fines.

PRESSED BOARD: The Beast will produce a consistent pin-type product for making pressed board. It can also be mixed with sludge to burn unwanted materials in a boiler.

THE BEAST® WILL MAKE YOU MONEY!The quality of the product produced by the Beast gives you so many new market options.

FIRST CLASS PARTS AND SERVICE SUPPORT. The Bandit Beast Recyclers are backed up by a group of highly trained service technicians. Our specially designed service trucks are equipped with all the tools to service the Beast Recycler and they carry a wide range of parts. Our trucks are also capable of pulling our 2680 and 3680 Beast Recyclers. In addition, most of Bandit’s 100+ dealers service and support our Beast Recyclers. We also have a staff of trained parts and service specialists at our main facility in Remus, MI ready to serve you.

Call today to schedule an appointment.

1-800-952-0178Local/International: 1-989-561-2270

YOU CAN CUT, SPLIT OR GRINDWITH THE BEAST’S PATENTED CUTTERMILL

Our famous, patented Beast cuttermill is the best choice for larger materials and materials that are relatively clean and the best mill for making dimensional products: the original head that can cut, split and grind.

Patented Beast Cuttermill

THE BEAST’S CUTTING ACTION IS BEST DESCRIBED BY COMPARING AN AX TO A SLEDGEHAMMER. WHICH

WOULD YOU RATHER USE TO CUT DOWN A TREE?

THE BEAST’S UNIQUE, PATENTED CUTTERMILL DESIGN ALLOWS YOU TO CUT, SPLIT OR GRIND. SAWTOOTH CUTTER HOLDER

This break-away tool holder, designed like a sawtooth, regulates the depth of cut and provides some protection from foreign materials. Production is maximized while making a consistent product and protecting the mill.

SAWTOOTH CUTTER WITH RAKER INSERTA raker ahead of the cutting tool regulates the length of cut while providing the breakaway tool holder some protection from rocks, steel and other foreign materials. The raker isavailable as a replaceable insert.

BREAK-AWAY CUTTER HOLDERThe cutter holder limits the bite of the cutting, splitting or grinding tool which is important in controlling the size of the product and helps maximize engine horsepower by not taking too large of a bite. The fixed break-away tool holders are heavy enough to cut through most materials, including nails, spikes and metal. When striking materials such as rock and heavy metal, the tool holders bend back out of the way, protecting the cuttermill and limiting damage to only a few holders and a few bits. Damaged bits can be replaced in minutes. The tool holders attach to the arms with two Grade 8 bolts. Should foreign material heavily impact the tool holder and break, the bolts will keep the tool holder in place. This will prevent the broken piece from ruining any more holders or cutting tools.

cUt, sPlit, Or GrindtwO Mills tO cHOOse FrOM, endless POssiBilities

WINTER - SPRING 2007 BEAST WASTE RECYCLER CATALOG | CUTTERMILLS

3

THE

ORIGINALCUTTERMILL

Beast Cuttermill Attachments

UNIQUE CUTTERBODIES PROVIDE A SMOOTH, CONTROLLED CUT AND PROTECT THE MILL WHEN ENCOUNTERING CONTAMINANTS.

FEATURING: 60 TEETH

Discharge Conveyor

4

THE DRAGONHEAD IS THE MILL FOR LIGHTER, MORE ABRASIVE MATERIALS

A more traditional grinding head with cutting tool options for processing bigger materials. The Dragonhead is ideal for dirtier applications, such as construction debris, and is also a good choice for regrind.

The All-New Dragonhead

CUTTERMILLS | WINTER - SPRING 2007 BEAST WASTE RECYCLER CATALOG

nO Matter tHe tasK at Hand:tHe Beast Has yOU cOvered!

You know that a Beast is the best for your operation, but which method is right for you?

Although our original cuttermill isthe best for most applications, the Dragonhead is recommended for processing pallet and construction waste, compost, and for certain regrind applications. With the Dragonhead, the Beast can be as much as 30% more productive in certain applications than a Beast with a cuttermill and/or a conventional grinder.

Contact Bandit today to learn more about our cutting and grinding options.

The Dragonhead comes equipped with thirty teeth. Depending on the material being ground, the Dragonhead has two styles of teeth available:

Dragonhead Tooth Options

Double-Splitter ToothFor applications dealing with larger diameter material.

Dual-Sided Grinding ToothEach side is impregnated with Tungsten carbide for durability, ideal for most grinding applications.

THE DRAGONHEAD MILL HAS BEEN SHOWN TO INCREASE PRODUCTIVITY BY NEARLY 30% IN CERTAIN APPLICATIONS.

FEATURING: 30 TEETH

FALL - WINTER 2006 BEAST WASTE RECYCLER CATALOG | WEAR PARTS - TEETH

5

Quality Bandit Wear PartsParts that maximize production while minimizing cost.Our Bandit Beast Recyclers allow you to run one or more different styles of teeth in the machine at one time to provide maximum efficiency and to make the best possible product. The cuttermill in our Beast has two spirals, making it easy and efficient to run one or more types of teeth. For most applications, running a combination of two styles works best.

XT Extender Line of TeethFor the Beast Cuttermill. Now featuring:• Better carbide for the cutters and splitters.• Better bonding process that makes it virtually impossible to separate

the cutting or splitting bit from the tooth. • The super fan are teeth made from a forging design and the fan is

larger. The fan protects the tooth bolt and the cutterbody where the tooth mounts. The fan teeth limit the amount of material that falls below the teeth to the cutterbodies, cutterbody bolts and mill, decreasing wear to those items and areas.

• The fan teeth increase the control of the bite making the Beast run smoother and help push material through the screen.

Teeth are selected based on the material being processed, the amount of contaminants in the material and the size of the desired end product. Cutting teeth produce a blocky type product while splitters produce a more shredded type product.

Cutting and splitting teeth are ideal for big materials while splitting and grinding teeth are known for their dependability. Cutting and splitting teeth will improve performance and lower operating costs when processing large materials.

Two different types of teeth are often used in combination to maximize performance and to deliver a specific end product. Sixty teeth are standard in the 2680, 3680 and 4680 with a 30 tooth setup offered as an option. Eighty teeth are standard in the 5680.

Improved teeth and new tooth options significantly lower tooth wear costs, increase production and provide new options for sizing the end product. New product sizes improve the quality and value of the Beast’s end product.

What has always been the best feature of the Beast cuttermill is that you can change teeth to yield the desired end product. This feature increases the value of the product.

The Beast allows you to cut, split or grind the material to best suit your particular situation.

Our improved Beast Recyclers produce more at a lower cost while improving the value of the processed material. The process starts with the teeth.

BEAST TOOTH OPTIONSIMPROVED TEETH, INCREASED PRODUCTIVITY

wHen tHe sUccess OF yOUr OPeratiOn dePends On tHe QUality OF yOUr PrOdUct,

tHe riGHt teetH MaKe all tHe diFFerence

NEW AND IMPROVEDCUTTERBODIESAll of our cutterbodies are now constructed with hard surface Tungsten carbide weld covering the wear areas of the cutterbody.

Three styles of cutter-

bodies are offered:

a cutterbody with

a replaceable raker

insert, a cutterbody

with a blunt raker

(available on the 2680

& 3680), and a saber

tooth cutterbody with

the more rounded raker

(available on the 4680).

For the traditional

blunt and saber tooth

cutterbodies, the raker

portion of the body is

hard-surface welded,

as are key areas on the

sides of the cutterbody

and in areas where the

tooth attaches.

Contact Bandit today

to find out which

style of cutterbody is

right for your Beast

Recycler.

RAKER ATTACHMENTCUTTERBODY OPTION

(AVAILABLE ON ALL MODELS)

BLUNT STYLECUTTERBODY OPTION

(MODELS 2680, 3680 ONLY)

SABER TOOTH CUTTERBODY OPTION

(MODEL 4680 ONLY)

ATTACHMENT OPTION:CARBIDE RAKER

(AVAILABLE ON ALL MODELS)

ATTACHMENT OPTION:BEAR CLAW RAKER (AVAILABLE ON ALL MODELS)

WEAR PARTS - TEETH | WINTER - SPRING 2007 BEAST WASTE RECYCLER CATALOG

6

cOMPare OUr new, wider Fan teetH tO tHe cOMPetitiOn

OUr teetH really MeasUre UP!

1” G55 Sprinkle Carbide XT ToothA tough, pure grinding tooth.

• Most often used when grinding pallets and construction debris.

• The G55’s produce a tooth-pick type material from pallets ideal for making fuel wood or pressed board.

• Tooth life in excess of 300 hours.

Over-Sized Splitter Carbide XT Tooth The thicker carbide splitter tooth will last longer than the 1” splitter tooth.

• Can be used in the same applications as the 1” splitter tooth.

• Tooth life can exceed 400 hours in some applications.

Pointed Shingle Carbide XT TeethA cutter style tooth with thicker carbide.

• Highly effective in processing shingles.• Excellent for grinding typical green

waste.• Tooth life can exceed 300 hours,

depending on the level of contaminants.

1” Carbide XT Cutter Tooth The 1” carbide cutter tooth is by far our best cutting tooth.

• The tooth of choice when processing logs and big wood.

• Require much less power to drive the tooth through the material, especially solid wood.

• Tooth life can exceed 200 hours, depending on operation.

1” Wide Splitter Forged Fan XT ToothFeatures the advantages of the Splitter Tooth plus the benefits of the Fan Tooth.

• Often used in conjunction with a 1” wide straight Splitter XT tooth and the 1” Carbide XT Cutter tooth.

• Very popular in land clearing and green waste applications, and for processing pallets and construction debris.

Helmet Head XT Tooth An excellent tooth for pallet and construction waste.

• Rounded-head splitter-style tooth.• Often used when processing light

green waste, logging slash, and sawmill waste.

• Most often used in conjunction with a straight splitter tooth or splitter fan.

XT Double Splitter ToothDouble your pleasure – double your fun!

• This dual splitter tooth provides twice the cutting surface as our popular splitter tooth providing increased production along with better wear.

• As with the splitter tooth, the Double Splitter is popular in land clearing operations and often used by themselves or with carbide cutters.

XT Shingle Super Fan ToothThe benefits of the shingle tooth merge with the benefits of the fan tooth.

• Thick cutter-style carbide. • Regulates the amount of bite and pushes

material through the screen. • Primary use is processing shingles. • Some uses in processing typical green

waste.• Tooth life approx. 300 hours.

Butcher XT Super Fan Tooth A 2” wide cutter tooth with a 3” forged fan

provides tremendous cutting capabilities.• Increases production in most

applications.• Provides the benefit of a Fan Tooth,

including increased throughput through the screen.

• Usually ran in conjunction with Splitter and 1” Cutter Teeth.


XT Splitter Tooth Our best all-around tooth, used in most applications.

• Especially popular in land clearing applications.

• Often used by themselves or with Carbide Cutters, Butcher Teeth, or G55 grinding teeth.


WINTER - SPRING 2007 BEAST WASTE RECYCLER CATALOG | MACHINE MAINTENANCE

7

did KnOw...

You can find product updates, used equipment listings, our entire library of product literature and videos, and much more at the click of a mouse!

Visit www.banditchippers.com to experience the Bandit difference!

OPTIONS | WINTER - SPRING 2007 BEAST WASTE RECYCLER CATALOG

8

MUST-HAVE OPTIONSFOR BEAST RECYCLERS

DEBRIS AUGERS CLEAN UP AREA AROUND MACHINESlow moving debris augers, mounted under the infeed conveyor, collect materials as they fall from the end of the feed conveyor and force them into the mill for processing. This limits the mess around the machine. More specifically, it controls spillage and improves production.

MAGNETIC HEAD PULLEYThe magnetic head pulley is especially efficient in removing metal contaminants. It is standard on all units except the 2680 where it is offered as an option.

REPLACEABLE BOLT-IN ROLL COVERAll 3680’s and 4680’s are equipped with a replaceable bolt-in roll cover for the mill housing, made of hardened steel.

FEATURES THAT IMPROVE THE EFFICIENCY OF YOUR BEAST

MACHINE MAINTENANCE MADE QUICK & EASY

NEW! SCREEN CHANGING ARMThe Beast Screen Changing Arm assists the operator in quickly and easily changing and installing the screens, reducing the effort and time needed, thus increasing productivity. The Screen Changing Arm is available as a retrofit on most Beast Recyclers and standard on new machines.

SCREENSScreens as small as 3/4” work well in the Beast, enabling you to produce as course or as fine a product as you’d like. The concave gate also serves as a screen to provide plenty of screening surface. Changing screens is a snap. They slide through a side panel and into position with the assistance of an electric powered winch, or with the new Screen Changing Arm.

3 SPEED INFEED CONVEYOR DRIVEA three-speed infeed conveyor drive maximizes engine horsepower and regulates particle size, allowing you to increase the speed for less dense materials or slow the speed for larger, denser materials. Changing the feed speed will also affect the size of the cut and end product.

INFEED CONVEYORThe infeed conveyor hydraulically backs up to allow easy access to the debris augers.

THE BEASTS ALMOST RUN THEMSELVESThe Auto Feed System governor automatically stops the feed and backs it out of the cut when the engine lugs to a set minimum RPM and then automatically restarts the feed when the engine reaches its maximum RPM. If the material will fit into the conveyor, it should feed through the machine without hang-up as long as the piece is not larger than the mill’s infeed opening. Odd shaped pieces, greater than the infeed opening, can be processed by partially cutting the piece and rolling it though the mill. The infeed conveyor and the top wheel will move in opposite directions to turn material. There is no limit to the length of material that can be cut.

Looking for a used chipper or grinder?

Bandit has you covered!

You can find great deals on rebuilt

and reconditioned equipment on

Bandit’s website. Check out our used equipment listings to find the unit that

is right for you.ANVIL CONVEYOR CHAIN ELIMINATES HANG-UPSA rugged, heavy-duty track type conveyor chain serves as a continuous anvil and will take abuse from processing heavy materials. No anvil is used in the initial breakdown, eliminating material hang-ups. The mill turns down, cutting against the conveyor chain. This chain should provide years of dependable service.

HYDRAULICALLY ACTIVATED GATE REJECTS CONTAMINANTS This gate allows the operator to quickly open and close a concave to the screening chamber to reject foreign materials. The Beast will often produce a uniform product with the concave gate open. Materials containing light metal, such as pallets, can be processed with the gate open. Simply separate the metal at the magnetic head pulley and then regrind to achieve

BOLT ON FLARED SIDESBolt on flared sides are made of resiliente T-1 steel. Standard on 3680, 4680 and 5680.Optional on 2680.

AUTO WALKPowers the 2680 and 3680 Beast, enabling the Beast to be moved along a windrow or a yard, eliminating the need for a towing vehicle.

FIFTH WHEEL HITCHA fifth wheel hitch is optional on the 2680 and 3680 and is standard on the 4680 and 5680.

REMOTE CONTROLTether and radio remotes control all machine functions and are available for all Beast Recyclers.

THROWER OPTION(AVAILABLE ON 2680 AND 3680)This hydraulic thrower is great for fully loading open end trailers, broadcasting material over a site or building tremendous piles. The thrower swivels, tilts, and folds under the conveyor.

30’ FOLDING DISCHARGE CONVEYORThe 30’ conveyor discharges to a height of 17’, 6” and is standard for all models except the 2680, where it is available as an option.

9

WINTER - SPRING 2007 BEAST WASTE RECYCLER CATALOG | SELF-PROPELLED BEAST

tHese Beasts are really GOinG PlacesTHE ULTIMATE LAND CLEARING MACHINES

This 3680 (shown above), with 700 horsepower and unique cutting action, works a lot like a whole tree chipper. But, unlike a whole tree chipper, the 3680 has a greater diameter capacity and substantially larger opening for processing limby material. The Beast will tolerate stones and dirt, unlike a whole tree chipper. The Beast’s feed rate is slower than a whole tree chipper, because of it’s infeed opening, but will process nearly the same amount of material.

• Take the Beast to the material and eliminate the need to skid or forward material.

• Process whole trees and stumps.• Great machines for utilizing or disposing of logging slash.• Great machines for recycling and compost yards - they travel

to the piled materials to be processed, significantly reducing handling costs and the need for a towing vehicle.

• Many land clearing contractors are purchasing the self-propelled Beasts over whole tree chippers because of their versatility.

• The remote controls can manipulate all Track Beast functions including movement of the tracks, feed system and engine. The operator can manipulate the Beast from the excavator.

• All are equipped with 325EL Caterpillar undercarriages.

MODEL 3680

MODEL 3680

MODEL 4680

MODEL 3680

10

MODEL 2680 | WINTER - SPRING 2007 BEAST WASTE RECYCLER CATALOG

The 2680 features a 42” diameter x 63” wide cuttermill with a 24” x 60” opening.

• This heavy-duty grinder is easy to transport.• The rugged 2680 has all the basic features of the

popular 3680 Beast Recycler.• A great introductory unit, excellent for harvesting

logging slash and mill waste.• Production will exceed 200 yards or 65 tons per

hour, depending on the material being processed.• This unit is very popular with tree services,

loggers, governmental agencies and land clearing contractors.

• Equipped with the Big Bite Drive System. • New 2680 Beasts equipped with 300 HP will

out-grind older 2680’s with 400 HP.

THE 2680 BEAST RECYCLER®

COMPACT AND ECONOMICALLY PRICED

MODEL 2680 SPECIFICATIONS

Height: 13’ 3”

Width: 8’ 6”

Length: 32’ 3”

Weight: 39,000 lbs.

Mill Opening: 24” high x 60” wide

# Cutting Teeth:

60

Feed Rate: 20 FPM

Discharge Conveyor:

Primary: 48” wide x 18’ longOptional: 30’ long

Diesel Engine Options:

300 - 400 HP

THE MOSTECONOMICAlLY PRICED,

HIGH PRODUCTION

UNIT ON THE

MARKET!

DID YOU KNOW...You can use your Beast Recycler to easily dispose of green waste, palm fronds, and other fibrous materials found in southern regions that traditional grinders have a

difficult time processing.

11

WINTER - SPRING 2007 BEAST WASTE RECYCLER CATALOG | MODEL 3680

The 3680 features a 42” diameter by 63” wide cuttermill with a 33” x 60” opening.• Provides high production with great portability

and ease of movement.• This unit will produce as much as 350 cubic

yards or 100 tons per hour, depending on the material being processed.

• This work horse has proven itself in every conceivable application throughout the world.

• The self-propelled 3680 is an extremely popular land clearing machine.


OUR MOST POPULAR BEAST


Height: 13’ 3”

Width: 9’ 7”

Length: 39’

Weight: 57,500 lbs.


# Cutting Teeth: 60

Feed Rate: 18 - 43 FPM

Discharge Conveyor:

48” wide x 30” long


395 - 700 HP

Electric Motor Options:

350 - 450 HP

ALL BEASTS ARE EQUIPPED WITH THE BIG BITE DRIVE SYSTEM The Big Bite drive system, standard equipment since Spring ‘04, is a major advancement for the 2680 and 3680 Beasts. The drive slows the RPM of the head, vastly improving performance and the quality of the end product, while lowering operating costs. Cutter teeth and cutter body wear is reduced because the wear parts move more slowly through the cut, resulting in lower operating costs. Increased torque means more power, a quality needed especially when grinding larger diameter materials.

As a result, the engine lugs less and fuel consumption is dramatically reduced. Slowing the head’s RPM, along with the variable feed conveyor system, enables the Beast to push material further into the cut, producing a larger, shredded-type mulch for those desiring such a product. The three-speed conveyor drive option lets the operator change the size of material being produced by simply changing the speed of the infeed conveyor. The slower the conveyor speed, the finer the cut.

NEWHIGH-TORQUE

DRIVEFUEL SAVINGS FACT

The fuel-efficient Beast cuttermill uses up to 14 gallons per hour less fuel than a conventional

grinding head, which can add up to over $50,000 in fuel savings per year.

12

MODEL 4680 | WINTER - SPRING 2007 BEAST WASTE RECYCLER CATALOG

The 4680 features a 45” high by 63” wide opening.• Especially effective for those processing large diameter trees,

logs and stumps.• This high production unit will process as much as 600 cubic

yards per hour, depending on the material being processed.


HIGH PRODUCTION, HIGH HORSEPOWER


Height: 13’ 6”

Width: 11’ 6”

Length: 46’

Weight: 84,000 lbs.


# Cutting Teeth: 60


Discharge Conveyor:

Primary: 56” wide x 10” longSecondary: 48” wide x 27” long


760 - 1000 HP

13

WINTER - SPRING 2007 BEAST WASTE RECYCLER CATALOG | MODEL 5680

The 5680 features a 65.5” diameter by 83” wide cuttermill with a 50” x 80” opening.This hungry Beast is our most productive grinder and is absolutely the best high production machine for big logs and stumps. The 5680 will process more than 700 cubic yards or 250 tons per hour, depending on the material being processed.


THE ULTIMATE WASTE REDUCTION MACHINE


Height: 13’ 6”

Width: 11’ 6”

Length: 48’ 9”

Weight: 95,000 lbs.


# Cutting Teeth: 80


Discharge Conveyor:

Primary: 72” wide x 27” longSecondary: 48” wide x 58” long


860 - 1000 HP

14

COLOR CRITTER | WINTER - SPRING 2007 BEAST WASTE RECYCLER CATALOG

“WOOD MADE GOOD WITH COLOR!”

THE COLOR CRITTERMULCH COLORING MADE EASY WITH YOUR BEAST RECYCLER

Now you can produce high quality, rich-looking mulch that will bring top dollar with the Color Critter II.

Low colorant costs • Little water required

The Color Critter II uses a dry, granular coloring pigment with a precise, electronically-controlled metering system that operates off the Beast’s electronic controls. This ensures the right amount of water and pigment flow. The coloring system straddles the infeed conveyor and bolts to the infeed conveyor’s support posts. The colorant hopper slides down into guide posts located on the Beast’s main frame. Five discharge ports evenly spread colorant over the material.

The quantity of colorant being discharged is easily adjusted by simply turning a knob that opens and closes the ports. The rate at which the colorant is discharged is controlled by the speed of the infeed conveyor.If the feed system stops, so does the flow of colorant.A metering gate ensures a controlled flow of material to the colorizer. The coloring system and infeed automatically stop when the colorant hopper is empty. One set of spray nozzles apply the 0 to 8 gallons of water per minute normally required to process green waste.

The second set of nozzles supply up to an additional 14 gallons of water per minute that may be required when coloring ground pallets or construction waste. Wet, green waste can often be colored without adding any water. Garden hoses supply water to the spray nozzles.

The colorant hopper holds in excess of 2,000 lbs. of granules. Multiple hoppers are recommended to quickly switch from one color to another, limiting downtime due to refilling the hopper. Colored mulch exits the machine nearly dry and can be bagged shortly thereafter. Oxidizing pigments penetrate the material to provide a rich, long lasting color that resists fading, allowing you to color earlier in the season.

Installation is simple. It takes about four hours to initially wire the colorizer’s control panel to the Beast. Once this initial wiring is complete, final installation takes about 15 minutes.

Power requirements – 110 volt current. A generator is often used to supply power to the colorizer and to the water pump when operating in a remote location.

High productionA 500-HP Beast can color as much as 200 cubic yards/hour in the final grind, depending on the desired product size. Colorant costs are usually under $3.00/cubic yard of finished product for most applications. Colorant is contained in the grinder with minimal spillage.

Color during the final grind.The granular colorant eliminates much of the mess associated with liquid and powder colorants.

The most economical way to make colored mulch.

A wet coloring system is also offered. The spray system for the wet coloring system mounts above the feed system. An automatic control system monitors the amount of colorant used and the amount of material flowing through the Beast.

color mulch with the color critter and watch your profits grow!

NOWAVAILABLE IN BOTHWET & DRY SYSTEMS

YOUR AUTHORIZED BANDIT DEALER

BANDIT INDUSTRIES, INC.6750 Millbrook Road • Remus, MI 49340Phone: (800) 952-0178 or (989) 561-2270Email: [email protected]: http://www.banditchippers.com

Simply the best machines for turning unwanted waste into a multitude of valuable products that command top dollar.

Bandit Industries, Inc. currently employs approximately 340

dedicated employees who help us produce more than 2,500 units

per year. We use the latest technology to cut, machine, weld and

assemble our machines. The key to our success and rapid growth

continues to be our employees who share our philosophy of producing

a quality product and providing excellent customer service.

We have a 220-acre site that we use for demonstrating and

extensive testing our equipment.

Much of our success is attributed to efforts focused on our

primary markets such as tree care, forest products and waste

reduction industries. Bandit Industries, Inc. provides wood

chippers, stump grinders and waste reduction equipment to all

parts of the world. Dedicated employees and hard work show

in the quality of Bandit products and customer service.

For more information about Bandit products, please call,

write or e-mail us to request any of the additional brochures

and DVDs we have to offer. Contact Bandit or one of our 80

qualified Bandit dealers to arrange a demonstration of the

Bandit product that best meets your needs.

Bandit products are manufactured in a modern 240,000 square foot manufacturing facility located at the company headquarters.

* All specifications, dimensions, standards and options subject to change without notice. Dimensions and weight vary, depending on options and engines selected.

09.006.WT.1000.R

1

Download - Beast 3680 Especifications

Top Related