Beaded Earrings-How to Make Jewelry with Wire and Beads
Learning how to make jewelry with wire and beads
is a scrumptious leisure time hobby for crafters at all
levels. It allows each of you to present your flair and
talent for creativity, plus it is relatively easy to whip
up compared to other beaded patterns. The
following contents are all about beaded earrings out
of wire and beads for your reference.
Supplies needed for the beaded earrings:
Non-Magnetic Hematite Bead
4mm Acrylic Rhinestone Bead
6mm Bicone Glass Bead
Earring Hook
Headpin
Jumpring
0.5mm Brass Wire
Side Cutting Pliers
Round Nose Pliers
Flat Nose Pliers
How to make jewelry with wire and beads?
Step 1: Make your bead into a perfect pendant
1st, slide 1 Non-Magnetic Hematite Bead and 5
Acrylic Rhinestone Beads onto a long headpin for
preparation;
2nd, create a wrapped herringbone. Each time you
form a wrapped coil push up one rhinestone bead.
3rd, fix the ending in place by wrapping several coils
as you did at the start;
4th, do a simple loop at the top with the leftover pin
part.
Get inspired and make your own beaded earrings in an easy way. This project will just show you how to
make jewelry with wire and beads.
Step 4: Create the other piece
Do steps 1~3 for the other piece of your pair of earrings!
This pair of beaded earrings may actually add a
splash of color to your earlobe and light up your
entire outfit. All techniques used for how to make
jewelry with wire and beads are showed in details
on our learning center, hoping to be helpful!
For more simple to easy jewelry making projects please click:
http://www.pandahall.com/learning-center.html
Step 2: Design the decorative
dangles
Slide the 6mm Bicone Glass Bead onto a short
headpin. Loop the rest of the pin. You may need
4~6 pieces for one earring.
Step 3: Attach the earring hook
Open a jumpring and feed the earring hook,
the two decorative dangles, the wrapped
herringbone pendant and the two other
dangles. Close it off and this is one of the
beaded earrings.