Download - Barton Cat

Metallic Cable Protection EquipmentConduit & Fittings • Trunking

Adaptable Switch & Socket Boxes

A Division of Caparo Precision Tubes Limited

EngineeringBAR ON

THE COMPANYSince 1983 Barton has been a subsidiary of Caparo Industries plc, a broadbased group with interests in engineering and steel.

Barton Engineering is a division of Caparo Precision Tubes Ltd. Operationshave been transferred to the Hub Le Bas site in the West Midlands.

THE QUALITYProducts listed in this brochure are either manufactured by BartonEngineering under a certified ISO 9000 system, or are manufactured byour suppliers under a certified ISO system or have their quality assuredto the same level by rigorous inspection at Barton Engineering.

ISO 9000 systems involve a complete set of working practices, disciplinesand procedures - implemented at each stage of the manufacturingprogramme, from raw material inspection through to final despatch.

As a result, all Barton products satisfy a uniform standard of quality andsafety.

THE SERVICEBarton provide a highly efficient customer service operation. Fully trained,specialist sales personnel working with computerised equipment provideaccuracy, precision and speed at all times.


EngineeringBAR ON

Introducing you to Barton

Caparo Group Ltd is a private U.K. holding companyset up in 1978 specialising principally in themanufacture and supply of steel based consumableproducts to industry.

During the 1980’s a large number of industrialsubsidiaries were acquired or developed organically,both in the U.K. and in the U.S.A., under thesub-grouping of Caparo Industries Plc, which waslisted on the London Stock Exchange until it becamea wholly owned subsidiary of Caparo Group Ltd in1991. In addition to the industrial companies listedbelow, the group owns commercial properties inLondon’s West End, the luxury Osborne Hotelin Torquay and minority investments in quotedcompanies in the U.K. and North America.

Hub Le Bas share the same site as BARTON ENGINEERING at Bilston, Wolverhampton in the West Midlands.

As the leading distributor of steel tubing in the UnitedKingdom, Hub Le Bas have four strategically placed branchesin Manchester, Bilston, Leicester & London.

A comprehensive range of products is held at each branch that includes the following:

Precision Welded Tube

Cold Drawn Seamless Mechanical & Hydraulic

Hot Finished Seamless Tube

Carbon Hollow Bar

Structural Hollow Sections

Welded Gas List Tubes

Stainless Steel Tubes

Profiles & Shaped Tube

Merchant Bar

Architectural Systems in Steel & Stainless Steel

Flo-Coat & Sculptured


EngineeringBAR ON

Sales Hotline: 01902 407199 Email: [email protected] 3

Index

Heavy Gauge Conduit ..................................................................................................4

Stocks, Dies & Guides ....................................................................................................5

Boxes Circular Small - Large ..............................................................................6-7

Boxes Circular Small Extension Pattern ..................................................8

Boxes Looping In & Adaptors ................................................................................9

Covers Circular Small - Large ............................................................................10

Hooks, Nipples, Couplings ....................................................................................11

Elbows, Tees, Bends, Rings, Washers ..........................................................12

Bushes, Plugs & Glands, Reducers, Locknuts....................................13

Saddles, Screws, Gaskets ........................................................................................14

Adaptable Boxes ................................................................................................................15

Flexible Metallic & PVC Metallic Conduit ..........................................16

Adaptors for Flexible Conduit ..........................................................................16

Switch & Socket Boxes, Earth Terminals ..............................................17

Quick Fix Cable Trunking ..............................................................................17-20

Lighting Trunking ..................................................................................................21-22

Multi Compartment Trunking ..........................................................................23

STANDARDSBarton products are generally manufactured in accordance with therelevant British Standards. Details of particular standards are given below:Product British and European

(Euro Norm) StandardsConduit - steel BS 4568 part 1

BS EN 50086-1:1994and BS EN 50086-2:1996 Metric sizesBS 31 Imperial sizes

Conduit Fittings BS EN 50086-1:1994& Accessories and

BS EN 50086-2:1996 Metric sizesBS 31 Imperial sizes

Adaptable Boxes BS 4568 part 2Conduit - Flexible BS EN 50086-2-3:1996Switch & Socket Boxes

BS 4662


EngineeringBAR ON

Sales Hotline: 01902 407199 Email: [email protected]

Please Note: 1. Pre-galvanised conduit does not meet the requirements of BS 4568 or BS EN 50086.It does not meet corrosion classifications defined in these standards.

2. Binding materials used to make up bundles of Conduit are not intended to beused when lifting this product which should be handled only with approved slings.

4

Conduit Steel

HEAVY GAUGECONDUIT WELDED- SCREWEDManufactured inaccordance with BS 31/BS4568/BS EN61386 & BSEN50086 (l.E.C. 614)where applicable. Each3.75 metre lengthscrewed both ends andcomplete with one solidcoupling.

External No of lengths No of bundles Metres Approx weightDiameter per bundle per lift per lift per lift Tonnes

BS 4568/BS EN 50086 Part 1Class 4 finish 20mm 8 50 1500 1.11HOT DIPPED GALVANISED 25mm 8 40 1200 1.13INSIDE & OUTSIDE 32mm 4 25 375 0.463.75 metre lengths

BS 31 Class 4 finishHOT DIPPED GALVANISED 1’1⁄2” 4 20 300 0.49INSIDE & OUTSIDE 2” 4 20 300 0.743.75 metre lengths

PRE-GALVANISEDINSIDE & OUTSIDE 20mm 8 50 1500 1.113.75 metre lengths 25mm 8 40 1200 1.13

BS 4568/BS EN 50086 Part 1Class 2 finish 20mm 8 50 1500 1.11BLACK ENAMELLED 25mm 8 40 1200 1.13INSIDE & OUTSIDE 32mm 4 25 375 0.463.75 metre lengths

BS 31 Class 2 finishBLACK ENAMELLED 1’1⁄2” 4 20 300 0.49INSIDE & OUTSIDE 2” 4 20 300 0.743.75 metre lengths

Above conduit is packedand shipped in lifts (alsoknown as MasterBundles). Each liftcomprising the statednumber of individualbundles measuringapproximately 45-50centimetres in diameterand 3.75 metres long. Theweight varies according tosize and finish of conduitbut approximate weightsare shown above.

Also available in 3000m lengths


EngineeringBAR ON


STOCKS, DIES, GUIDESComplete set Comprising Stock, Dies and Guides. To screw conduit dia. of 20-32mm.SD2025 Complete set comprising stock,

die and guides for 20mm and - 25mm Conduit. Overall Dia. of Dies 42mm.

SD32 Complete set comprising stock, die and guide for 32mm Conduit.Overall Dia. of Die 63.5mm

Stock - SpareOverall Dia. of Die

ST42 Stock 42mmST64 Stock 63.5mm

Die - Spare Steel

Overall Dia. of Die20mm Die 42mm DE2025mm Die 42mm DE2532mm Die 63.5mm DE32

Guide - Spare Steel

Overall Dia. of Die20mm Guide 42mm GE2025mm Guide 42mm GE2532mm Guide 63.5mm GE32

DRAW-IN TAPES - Steel

Size 20mtrs x 3.2mm DT20Size 30mtrs x 3.2mm DT30

5

Conduit Steel


EngineeringBAR ON

Conduit Fittings & Accessories

BOXES - CIRCULAR, SMALL60.3mm Internal diameter. 20mm Boxes - min 25mm deep 25mm boxes - min 28mm deep

Tapped M4 at 50.8mm centres. with tapped hole in base for earthing screw.Supplied without covers or earthing screws unless ordered.


Terminal Box M181Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

Through Box M182Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

Angle Box M183Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

Tee Box M184Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

Intersection Box M185Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

Back Outlet Box M186Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

Terminal & Back Outlet Box M187Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

Through & Back Outlet Box M188Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

Angle & Back Outlet Box M189Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

Tee & Back Outlet Box M190Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

Intersection & Back Outlet BoxM191

Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

Tangent Through Box M192Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

Tangent Angle Box M193Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

Tangent Tee Box M194Material: Malleable IronFinish: GalvanisedSize 20mm Box Qty 10

6


EngineeringBAR ON



Branch Two Way (U) Box M195Material: Malleable Iron Finish: Galvanised

Size 20mm 25mm Box Qty 10 10

Branch Three Way (Y) Box M196Material: Malleable Iron Finish: Galvanised


Branch Through Way (H) Box M197Material: Malleable Iron Finish: Galvanised


Terminal Box M211Material: Malleable Iron Finish: Galvanised

Size 20mm 25mm 32mm Box Qty 5 5 5Size 11⁄2” 2”Box Qty 5 4

Through Box M212Material: Malleable Iron Finish: Galvanised


Angle Box M213Material: Malleable Iron Finish: Galvanised


Tee Box M214Material: Malleable Iron Finish: Galvanised


Intersection Box M215Material: Malleable Iron Finish: Galvanised


7

BOXES - CIRCULAR, SMALL (continued from page 6)

BOXES - CIRCULAR, LARGE81mm Internal Diameter,

20mm and 25mm Boxes Minimum 35mm Deep.32mm Box Minimum 38mm Deep.11⁄2” Box Minimum 44mm Deep.2” Box Minimum 57mm Deep.

Tapped M4 at 71.5mm Centres.With tapped hole in base for earthing screw.

Supplied without covers or fixing screws unless ordered.


EngineeringBAR ON


BOXES - CIRCULAR, SMALL EXTENSION PATTERN60.3mm Internal diameter. 20mm Boxes - min 25mm deep 25mm boxes - min 28mm deep

Tapped M4 at 50.8mm centres. With tapped hole in base for earthing screw.Supplied without covers or earthing screws unless ordered.


Terminal Box M241Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

Through Box M242Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

Angle Box M243Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

Tee Box M244Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10

Intersection Box M245Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 10 10


EngineeringBAR ON


BOXES - LOOPING INWith tapped hole in base for earthing screw.20mm clearance.


Medium Steel Box R274Material: Steel. Finish: Zinc Plated1 Hole or 4 Knockouts. Size: 29mm Deep

x 63.5mm Internal Diameter.Box Qty 10

Medium Steel Box M272Material: Malleable. Finish: Galvanised 1,2,3,4 Holes. Size: 31mm Deep

x 63.5mm Internal Diameter.Box Qty 10

Imperial to Metric Adaptor R114Size: 3⁄4 MALE to 20mm FEMALE Box Qty: 100 Size: 1” MALE to 25mm FEMALE Box Qty: 50

Metric to Imperial Adaptor R115Size: 20mm MALE to 3⁄4 FEMALE Box Qty: 100 Size: 25mm MALE to 1” FEMALE Box Qty: 50

9

ADAPTORSMaterial: Steel Finish Zinc Plated


EngineeringBAR ON


COVERS - CIRCULAR SMALL


Covers, Light Overlapping R280Loose, No screwsMaterial: SteelFinish: GalvanisedBox Qty 50

Covers, Light R281Loose, No screwsMaterial: SteelFinish: Black Enamel, GalvanisedBox Qty 100

Covers, Heavy R282Loose, No screwsMaterial: SteelFinish: Black Enamel, GalvanisedBox Qty 50

Cover Ball & Socket, Earthed M286Material: Malleable Iron withcopper earthwireFinish: GalvanisedSize 20mm 25mm Box Qty 25 25

Cover, Hook Dome, Comined R287Material: SteelFinish: GalvanisedBox Qty 25

Cover, Female Dome M288Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 25 25

Cover, Female Dome R289Material: SteelFinish: GalvanisedSize 20mm 25mm Box Qty 25 25

Cover, Ball & Socket, Earthed R290Material: SteelFinish: GalvanisedSize 20mm Box Qty 25

Cover, Light R381Loose, No screwsMaterial: SteelFinish: GalvanisedBox Qty 50

COVERS CIRCULAR LARGE



EngineeringBAR ON


Hook, Male M502Material: SteelFinish: GalvanisedSize 20mm 25mm Box Qty 50 50

HOOKS

Coupling, solid R101Material: SteelFinish: GalvanisedSize 20mm 25mm 32mmBox Qty 100 50 50Size 11⁄2” 2”Box Qty 25 20

COUPLINGS

Coupling, Inspection M103Material: Malleable Body with SteelCover Finish: GalvanisedSize 20mm 25mm Box Qty 100 50

Coupling, Earthing M105Material: Malleable IronFinish: GalvanisedSize 20mm 25mm Box Qty 100 50Size 11⁄2” 2”Box Qty 25 10

Coupling, Flanged M110/M111Material: Malleable IronComplete with washer & brass bush. M110 (Lead washer) M111 (Neoprene washer)Finish: GalvanisedSize 20mm 25mm 32mm Box Qty 50 50 25

Nipple, Normal F107Material: SteelFinishes: GalvanisedSize 20mm 25mm 32mmBox Qty 100 100 50Size 11⁄2” 2”Box Qty 25 20

NIPPLES

Nipple, 300mm Long F109Material: SteelFinishes: GalvanisedSize 20mm 25mm 32mmBox Qty 10 10 10Size 11⁄2” 2”Box Qty 10 5


EngineeringBAR ON



Elbow, Solid M121Material: Malleable IronFinish: GalvanisedSize 20mm 25mm 32mmBox Qty 25 25 10

ELBOWS

Elbow, Channel Inspection M123Material: Malleable Body with SteelCover Finish: GalvanisedSize 20mm 25mm 32mmBox Qty 25 25 10

Bends, Normal, Internal Thread R141Material: SteelFinish: GalvanisedSize 20mm 25mm 32mmBox Qty 25 10 5

BENDS

WASHERS

Bend, Inspection M145Material: Malleable Body with SteelCover Finish: GalvanisedSize 20mm 25mm 32mmBox Qty 25 10 5

Lead F112Neoprene F113Size 20mm 25mm 32mmBox Qty 50 50 25

Serrated F116Material: SteelFinish: Zinc PlatedSize 20mm 25mm Box Qty 100 100

Tee, Solid M131Material: Malleable IronFinish: GalvanisedSize 20mm 25mm 32mmBox Qty 25 25 10

TEES

Tee, Channel Inspection M133Material: Malleable Body with SteelCover Finish: GalvanisedSize 20mm 25mm 32mmBox Qty 25 20 10

Ring, Extension R294Material: SteelFinishes: GalvanisedSize 6mm 10mm 13mmBox Qty 100 50 50Size 16mm 19mm 25mmBox Qty 25 25 25Size 32mm 38mm 50mmBox Qty 10 10 10

RINGS



EngineeringBAR ON

Conduit Steel

BUSHES REDUCERS

PLUGS AND GLANDS

Bush, Short Male F531Material: Brass Finish: Self ColourSize 20mm 25mm 32mmBox Qty 100 50 50Size 11⁄2” 2”Box Qty 50 25

LOCKNUTS

Plug, Hexagon Head M527Material: Malleable IronFinish: GalvanisedSize 20mm 25mm 32mmBox Qty 100 100 100

Plug, Slotted Head F535Material: BrassFinish: Self ColourSize 20mm 25mm 32mmBox Qty 100 100 100

Gland for TRS or similar cable F538Material: BrassFinish: Self ColourSize 20mm 25mmBox Qty 100 100

Reducer M471Material: Malleable Finish: GalvanisedSize 25 x 20mm 32 x 20mmBox Qty 100 50Size 32 x 20mm 11⁄2 x 2”Box Qty 50 25

Bush, Long Male F532Material: Brass Finish: Self ColourSize 20mm 25mm 32mmBox Qty 100 50 50Size 11⁄2” 2”Box Qty 25 25

Bush, Short Female F534Material: Brass Finish: Self ColourSize 20mm 25mm 32mmBox Qty 100 100 100Size 11⁄2” 2”Box Qty 100 50

Locknut, Hexagon Light R507Material: Steel Finish: GalvanisedSize 20mm 25mm 32mmBox Qty 100 100 100Size 11⁄2” 2”Box Qty 50 25

Locknut, Hexagon Heavy R509Material: Steel Finish: GalvanisedSize 20mm 25mm 32mmBox Qty 100 100 100Size 11⁄2” 2”Box Qty 50 50

Locknut, Circular, Milled Edge F505Material: Steel Finish: Zinc PlatedSize 20mm 25mm 32mmBox Qty 100 100 100Size 11⁄2” 2”Box Qty 50 25



EngineeringBAR ON

Conduit Steel

SADDLES

Saddle, Hospital M362Material: Malleable IronFinish: GalvanisedSize 20mm 25mm 32mmBox Qty 50 25 25

SCREWS

Zinc Plated, M4 Pan Head F645Length: 6mm, 10mm, 12mm,

16mm, 20mm, 25mmBox Qty 100

Brass, M4 Earth Terminal StudsF657

Box Qty 100

GASKETS

Rubber Gasket for Box, F409Small Circular

Rubber Gasket for Box, F410Large Circular

Crampet, Steel F461Material: SteelFinish: GalvanisedSize 20mm 25mmBox Qty 100 100

Saddle, Distance M363Material: Malleable IronFinish: GalvanisedSize 20mm 25mm 32mmBox Qty 50 25 25Size 1” 2”Box Qty 25 10

Saddle, Spacer Bar, One Way R431Material: Steel Finish: GalvanisedSize 20mm 25mm 32mmBox Qty 100 100 50Size 1” 2”Box Qty 50 25

Clip (Half Saddle) F441Material: SteelFinish: GalvanisedSize 20mm 25mm 32mmBox Qty 100 100 100

Saddle 1 Way (Single) R451Material: SteelFinish: GalvanisedSize 20mm 25mm 32mmBox Qty 100 100 100Size 1” 2”Box Qty 50 50


EngineeringBAR ON

Barton Adaptable Boxes are manufactured fromsteel and are available with plain sides orknock-outs. The standard finishes are BlackEnamel and Hot Dipped Galvanised.(Pre-galvanized lids).Where boxes are supplied with knock-outs thenumber and size are as follows:


ADAPTABLE BOXES

Width of side Number of K.O.s Size of K.O.in each side

3” 2 20mm4” 3 20mm6” 4 20mm9” 6 20mm12” 6 20mm

Flanged lids are fitted as standard to all boxes and are secured by M5 x 8mmmushroom head screws.

The complete range is manufactured in accordance with BS 4568 Part 2.

A range of Pre-Galvanised Adaptable Boxes are also available on request.

Size Packmm Inches Qty

75 x 75 x 37.5 3 x 3 x 11⁄2 1075 x 75 x 50 3 x 3 x 2 1075 x 75 x 75 3 x 3 x 3 6100 x 75 x 37.5 4 x 3 x 11⁄2 10100 x 75 x 50 4 x 3 x 2 10100 x 100 x 37.5 4 x 4 x11⁄2 10100 x 100 x 50 4 x 4 x 2 10100 x 100 x 75 4 x 4 x 3 6150 x 75 x 37.5 6 x 3 x 11⁄2 6150 x 75 x 50 6 x 3 x 2 6150 x 75 x 75 6 x 3 x 3 6150 x 100 x 37.5 6 x 4 x 11⁄2 6150 x 100 x 50 6 x 4 x 2 6150 x 100 x 75 6 x 4 x 3 6150 x 50 x 37.5 6 x 6 x 11⁄2 6150 x 50 x 50 6 x 6 x 2 6150 x 50 x 75 6 x 6 x 3 4150 x 50 x 100 6 x 6 x 4 2225 x 75 x 37.5 9 x 3 x 11⁄2 6225 x 75 x 50 9 x 3 x 2 6225 x 75 x 75 9 x 3 x 3 6225 x 150 x 37.5 9 x 6 x 11⁄2 4225 x 150 x 50 9 x 6 x 2 4225 x 150 x 75 9 x 6 x 3 4225 x 150 x100 9 x 6 x 4 2225 x 225 x 50 9 x 9 x 2 2225 x 225 x 75 9 x 9 x 3 2225 x 225 x100 9 x 9 x 4 1300 x 150 x 50 12 x 6 x 2 2300 x 150 x 75 12 x 6 x 3 2300 x 150 x100 12 x 6 x 4 2300 x 225 x 50 12 x 9 x 2 2300 x 225 x 75 12 x 9 x 3 1300 x 225 x100 12 x 9 x 4 1300 x 300 x 50 12 x 12 x 2 2300 x 300 x 75 12 x 12 x 3 1300 x 300 x100 12 x 12 x 4 1


Adaptable Boxes, Plain R261

Adaptable Boxes, with knock-outs R262



EngineeringBAR ON

Conduit-Flexible

Adaptor, Flexible Tube, Conduit,Male Thread F536

Conduit x Flexible Standard PackConduit l/D Quantity16mm x16mm 10020mm x16mm 10020mm x 20mm 5025mm x 25mm 5032mm x 32mm 2511⁄2” x 40mm 202” x 50mm 10

STANDARD FLEXIBLE METALLIC CONDUIT (UNPACKED)Electro Galvanised Steel F561

Internal Diameter 6mm 10mm 12mm16mm 20mm 25mm32mm 40mm 50mm

Standard Coil lengths: 6mm - 32mm - 15 metre lengths

40mm & 50mm - 7.5 metre lengths

Also available in 10 or 30 metre lengths.

P.V.C. COVERED FLEXIBLE METALLIC CONDUITAvailable as standard in black P.V.C. sheathed for addedprotection against ingress of dirt, moisture and greases.For additional flexibility vacuum formed black P.V.C. covered isalso available to order.A full range of fittings is also available.

Adaptor, Flexible Tube, Conduit,Female Thread F537

Conduit x Flexible Standard PackConduit l/D Quantity20mm x16mm 10020mm x 20mm 5025mm x 20mm 5025mm x 25mm 5032mm x 32mm 2511⁄2” x 40mm 202”x 50mm 10



EngineeringBAR ON

Switch & Socket Boxes

Adjustable Lug

Regulation Brass Earth Terminal

Switch Boxes 16mm deep BC42RE

Gang Type of Entry Fixing Lugs PackQty.

One 1 oval hole fitted 1 fixed and 20Gang with rubber 1 adjustable

grommet and3 oval KO’s forgrommet entry

A comprehensive range of switch and socket boxes manufactured infour depths 16mm, 25mm, 35mm and 48mm and all available in oneand two gang configurations. To facilitate the easy fitting ofaccessories into the boxes, they are designed with at least oneadjustable lug.

All Barton RE Series Switch and Socket Boxes include a uniqueRegulation Brass Earth Terminal into which several earth wires can befitted from either the inside or outside of the box.

Each box is produced with a specified number and size of knock outswhich allow adequate cable entries for wiring purposes.Nominal Dimensions:One Gang - 72mm x 72mmTwo Gang - 132mm x 72mmMaterial: Pre-coated galvanised steel Barton switch and socket boxesare manufactured in accordance with BS 4662.

Switch & Socket Boxes 25mm deepBC62RE


One 20mm KO’s 2 fixed and 10Gang 2 adjustable

Switch & Socket Boxes 25mm deepBC72RE


One 16 x 20mm 1 fixed and 5Gang KO’s 1 adjustable

Switch & Socket Boxes 35mm deepBC82RE2025


One 20 & 25mm 3 fixed and 20Gang KO’s 1 adjustable

Switch & Socket Boxes 35mm deepBC92RE2025


Two 20 & 25mm 1 fixed and 10Gang KO’s 1 adjustable

Switch & Socket Boxes 47mm deep(For use with double thickness partitioning) BC14RE


One 12 & 20mm 2 fixed and 10Gang KO’s 2 adjustable

Switch & Socket Boxes 47mm deep(For use with double thickness partitioning) BC22RE


Two 20 & 25mm 1 fixed and 5Gang KO’s 1 adjustable



EngineeringBAR ON

Quick-Fix Trunking

THE BARTON CABLE TRUNKING RANGE

QUALITYAll galvanised steel used in the manufacture of cable trunkingand fittings complies withBSEN 50085-1:2005BSEN 50085-2-1:2006

MULTI COMPARTMENT TRUNKINGPrice on application

QUICK-FIX RANGE (QF)This is the most popular range of trunking. It features a rapid andfool proof method for securing the lid, by simply twistingturnbuckles through 90 degrees. These lock the lid in place,providing full earth continuity between body and lid.The range is manufactured from high quality galvanised steel asstandard.

LIGHTING TRUNKING (LT)The range of lighting trunking has a 50 x 50mm body sectionwith either a white PVC or steel snap-in lid. Fittings are commonto the Quick-Fix range, providing complete compatabilitybetween cable and lighting trunking.The standard finish is high quality galvanised steel.

QUICK-FIX

The turnbuckle can be used to secure lidson cut lengths of trunking.

Direction arrows - Indicates clearly thatturnbuckle is correctly positioned.Assists installer quality inspection.

Recessed turnbuckle -Provides good aestheticappearance.

Turnbuckle lid fixing - A simple 1⁄4 turn locks or unlocks the lid. Allows easy filling andremoval, still providing secure fixing.

Integral Couplers - Easy and quick attachment to trunking with no additional couplers necessary.

Good scraping earth -Provides good earth

continuitybetween body and lid,

ensuring safety.

Plunged and pierced tapped holes on

couplers and fillings - Singlescrew fixing saves time - Fixingmerely requires a screwdriver.

Fixing screws supplied with each fittingNo additional items to order.

Copper Earth Link available if required.

Return edge - Increased rigidity.

50 x 50 QF/22 QF/RABT 22 QF/RABI 22 QF/RABO 2275 x 50 QF/32 QF/RABT 32 QF/RABI 32 QF/RABO 3275 x 75 QF/33 QF/RABT 33 QF/RABI 33 QF/RABO 33100 x 50 QF/42 QF/RABT 42 QF/RABI 42 QF/RABO 42100 x 75 QF/43 QF/RABT 43 QF/RABI 43 QF/RABO 43100 x 100 QF/44 QF/RABT 44 QF/RABI 44 QF/RABO 44150 x 50 QF/62 QF/RABT 62 QF/RABI 62 QF/RABO 62150 x 75 QF/63 QF/RABT 63 QF/RABI 63 QF/RABO 63150 x 100 QF/64 QF/RABT 64 QF/RABI 64 QF/RABO 64150 x150 QF/66 QF/RABT 66 QF/RABI 66 QF/RABO 66225 x 100 QF/94 QF/RABT 94 QF/RABI 94 QF/RABO 94



EngineeringBAR ON

Quick-Fix Trunking

50 x 50 QF/FFT 22 QF/FFI 22 QFI/FFO 22 QF/FW 22 OF/H 2275 x 50 QF/FFT 32 QF/FFI 32 QF/FFO 32 QF/FW 32 OF/H 3275 x 75 QF/FFT 33 QF/FW 33 QF/FFO 33 QF/FW 33 QF/H 33100 x 50 QF/FW 42 QF/FFI 42 QF/FFO 42 QF/FW 42 QF/H 42100 x 75 QF/FFT43 QF/FF143 QF/FFO 43 QF/FW 43 QF/H43100 x 100 QF/FFT 44 QF/FFI 44 QF/FFO 44 QF/FW 44 QF/H 44150 x 50 QF/FFT 62 QF/FFI 62 QF/FFO 62 QF/FW 62 QF/H 62150 x 75 QF/FW 63 QF/FFI 63 QF/FFO 63 QF/FW 63 QF/H 63150 x 100 QF/FFT 64 QF/FFI 64 QF/FFO 64 QF/FW 64 QF/H 64150 x 150 QF/FFT 66 QF/FFI 66 QF/FFO 66 QF/FW 66 QF/H66225 x 100 QF/FFT 94 QF/FFI 94 QF/FFO 94 QF/FW 94 QF/H 94

Dimensions CABLE TRUNKING RIGHT ANGLE BEND RIGHT ANGLE BEND RIGHT ANGLE BEND(mm) (See note (1) below) TOP LID INSIDE LID OUTSIDE LID

Dimensions 45 DEGREE BEND 45 DEGREE BEND 45 DEGREE BEND 4 WAY HANGER(mm) TOP LID INSIDE LID OUTSIDE LID BOX

(1) Cable Trunking - 3m length complete with lid and couplers.Product Code Example. QF/RABT 22. ie. Quick-Fix/Right Angle Bend Top 2” x 2”.

All 50 x 50mm Fittings are compatible with 50 x 50mm Lighting Trunking.

50 x 50 QF/TT 22 QF/TI 22 QF/TO 2275 x 50 QF/TT 32 QF/TI 32 QF/TO 32 75 x 50 TO 50 x 50mm QF/RED 32/2275 x 75 QF/TT33 QF/TI 33 QF/TO 33 75 x 75 TO 50 x 50mm QF/RED 33/22100 x 50 QF/TT 42 QF/TI 42 QF/TO 42 75 x 75 TO 75 x 50mm QF/RED 33/32100 x 75 QF/TT43 QF/TI 43 QF/TO 43 100 x 50 TO 50 x 50mm QF/RED 42/22100 x 100 QF/TT44 QF/TI 44 QF/TO 44 100 x 75 TO 50 x 50mm QF/RED 43/22150 x 50 QF/TT62 QF/TI 62 QF/TO 62 100 x 100 TO 50 x 50mm QF/RED 44/22150 x 75 QF/TT63 QF/TI 63 QF/TO 63 100 x 100 TO 75 x 75mm QF/RED 44/33150 x 100 QF/TT64 QF/TI 64 QF/TO 64 150 x 100 TO 100 x 100mm QF/RED 64/44150 x 150 QF/TT66 QF/TI 66 QF/TO 66 150 x 150 TO 100 x 100mm QF/RED 66/44225 x 100 QF/TT94 QF/TI 94 QF/TO 94 150 x 150 TO 150 x 100mm QF/RED 66/64


50 x 50 QF/SE 22 QF/C 2 QF/FC 2 QF/CRS 2 QF/PR 22 QF/LS 275 x 50 QF/SE32 QF/C2 QF/FC 2 QF/CRS 3 QF/PR 32 QF/LS 275 x 75 QF/SE 33 QF/C 3 QF/FC 3 QF/CRS 3 QF/PR 33 QF/LS 3100 x 50 QF/SE 42 QF/C2 QF/FC 2 QF/CRS 4 QF/PR 42 QF/LS 2100 x 75 QF/SE 43 QF/C 3 QF/FC 3 QF/CRS 4 QF/PR 43 QF/LS 3100 x 100 QF/SE 44 QF/C 4 QF/FC 4 QF/CRS 4 QF/PR 44 QF/LS 4150 x 50 QF/SE 62 QF/C 2 QF/FC 2 QF/CRS 6 QF/PR 62 QF/LS 2150 x 75 QF/SE 63 QF/C 3 QF/FC 3 QF/CRS 6 QF/PR 63 QF/LS 3150 x 100 QF/SE 64 QF/C 4 QF/FC 4 QF/CRS 6 QF/PR 64 QF/LS 4150 x 150 QF/SE 66 QF/C 6 QF/FC 6 QF/CRS 6 QF/PR 66 QF/LS 6225 x 100 QF/SE 94 QF/C 4 QF/FC 4 QF/CRS 9 QF/PR 94 QF/LS 4

Dimensions TOP BEND TEE BEND TEE BENDREDUCER(mm) TOP LID INSIDE LID OUTSIDE LID

Dimensions STOP END COUPLER FLANGED CABLE PIN LOOSE SEPERATOR(mm) COUPLER RETAINER RACK 3m LENGTHS

• Non gusset fittings and accessories are available.Hangers are available with 11 mm or 21mm holes.

Manufactured from pre-galvanised sheet steel to BSEN 50085-1:2005 BSEN 50085-2-1:2005


EngineeringBAR ON

Quick-Fix Trunking

50 x 503.5M long LT22/3.5 2M long 2M long4.5M long LT22/4.5 2M long 2M long



EngineeringBAR ON

Lighting Trunking

Dimensions LIGHTING TRUNKING - BODY ONLY METAL LID P.V.C. LID(mm)

50 x 50 QF/RABT 22 QF/RABI 22 QF/RABO 22

Dimensions RIGHT ANGLE BEND - TOP LID RIGHT ANGLE BEND - INSIDE LID RIGHT ANGLE BEND - OUTSIDE LID(mm)

50 x 50 QF/FFT 22 QF/FFI 22 QF/FFO 22

Dimensions 45 DEGREE BEND - TOP LID 45 DEGREE BEND - INSIDE LID 45 DEGREE BEND - OUTSIDE LID(mm)

Product Code Example QF/RABT 22 i.e. Quick-Fix/Right Angle Bend Top 2” x 2”.



EngineeringBAR ON

Lighting Trunking

50 x 50 QF/TT 22 QF/TI 22 QF/TO 22

Dimensions TEE BEND - TOP LID TEE BEND - INSIDE LID TEE BEND - OUTSIDE LID(mm)

50 x 50 QF/FW 22 LT/SU 22 LT/H 22

Dimensions FOUR WAY BOX SUSPENSION UNIT HANGER(mm)

50 x 50QF/SE 22 LT/LC 22 QF/FC 2 QF/CRS 2

LT/SC 22

Dimensions STOP END COUPLER FLANGED COUPLER CABLE RETAINER(mm)

Product Code Example QF/RABT 22 i.e. Quick-Fix/Right Angle Bend Top 2” x 2”.


EngineeringBAR ON

Multi-Compartment Trunking

AVAILABLE IN QUICK-FIX SYSTEMS

For 2 Compartment Trunking add QF/ -----/2 to the listed numbers on the previous pages.

For 2 Compartment Trunking add QF/ -----/3 to the listed numbers on the previous pages.



EngineeringBAR ON

Barton EngineeringRose Street, Bradley, Bilston West Midlands WV14 8TS

Telephone: +44 (0)1902 407199 Fax: +44 (0)1902 495106

Email: [email protected]: www.hublebas.co.uk

Download - Barton Cat

Top Related