Transcript

GLOBALPUMPING SOLUTIONS

Air Operated Double Diaphragm Pumps

www.blagdonpump.com

Reduce

down-time with

our immediate

availability of

spares for Blagdon

and competitors.

Confidence

of delivery

99.1%on-time

delivery

Flexible design

and production

meets our

customer’s

exacting

standards.

High quality

products with

certification to

EHEDG, ATEX, ISO.

Worldwide

technical

representation for

customer’s

support.

2 www.blagdonpump.com

Our Background

Our Credentials

Our Mission

Our Website

Blagdon Pump was originally founded in the early 1950's in the North

East of England as a specialist pump manufacturer. We commenced

the production of AIR OPERATED DOUBLE DIAPHRAGM PUMPS in

1979. We soon became market leaders in their production resulting in

the US based multi-national IDEX CORPORATION acquiring Blagdon

Pump to strengthen their position in the double diaphragm market in

1997.

We are world-wide market leaders in providing high quality AIR

OPERATED DOUBLE DIAPHRAGM PUMPS. We comply with all

British Standards BS EN ISO 9001:2000 Quality Management System

and BS EN ISO 14001:2004 Environmental Management System.

We comply with the letter and spirit of current OH & S legislation and

other requirements as well as take all necessary measures to protect

the Environment.

We are INVESTOR IN PEOPLE accredited as we continuously strive

to improve our products and standards for our customers.

Is to provide all our customers with an exceptional product and

service. To be respected by customers and competitors alike,

setting standards by which others will be measured.

We are committed to offering you a dedicated sales and after sales

service which is second to none. Now you can keep up to date with

developments as they happen with our NEW WEBSITE and

QUARTERLY NEWSLETTER. (See inside back pages for more

details)

There is a lot happening at Blagdon Pump.

We aim to make dealing with us a more

efficient experience. A service you can rely

on for all your pump requirements

We look forward to dealing with you.

General Manager

Blagdon – The Company

Continuous improvement methodologies are at the heart of the Blagdon culture and used every day in every process within the business.

Durham University has for the past 10 years used our Washington factory as one of its preferred sites for the purpose of training in manufacturing techniques in a full production setting.

John Garside, Teaching Fellow and Industrial Tutor at Durham University said:

“I have had many a student and project activities with Blagdon Pump since about 1996. I now feel priviliged to visit myself and recommend others to visit Blagdon Pump, and hear and see what I call the 'Blagdon Story'.I believe it is truly special; it covers so many aspects of excellent manufacturing and business practices”.

Neil Radbourne, Best Practice Manager, MAS (Manufacturing Advisory Service) said:

“Blagdon's unique use of continuous improvement activity together with lean and six sigma tools provides a stimulating combination with excellent examples for visiting managers, whether from large or small organisations”.

Current practices include:

! Six Sigma! Kaizen! Value Stream Mapping! Supply Chain Management! 5S Housekeeping! Lean Thinking! Kanban

Anyone wishing to experience how Blagdon Pump manages continuous improvement can arrange a visit by calling +44 (0) 191 417 7475.

Air operated double diaphragm pumps have long been recognised as the "work horse" of industry for handling "difficult" liquids at relatively low pressures and flows. The range of applications is virtually limitless. Blagdon AODD pumps come in many sizes and choices of materials of construction. Almost every type of liquid from highly corrosive acids through high viscosity paints and adhesives, to food and drink products can be pumped.

3

Choice of models to suit all applications

The Products

Download individual specificationsheets from our website.

Blagdon 1/2 ", 1" and 2" EHEDG Approved Hygienic Pumps in Polished 316L Stainless Steel

Blagdon Non-metallic B10 3/8” available in Polypropylene and Kynar (PVDF)

Blagdon 1" and 2" High Pressure 2:1 Pumps availablein Aluminium, Stainless Steel

BLAGDON 1/2”, 1”, 1 1/2”, 2” FDA Compliant Pumps inPolished Steel plus assorted standard fluid fittings

Blagdon Non-metallic Pumps available inPolypropylene and Kynar (PVDF) from 1/4" to 2”

Blagdon Metallic Pumps available in Aluminium,Cast Iron, Stainless Steel from 1/4" to 3”

How the double diaphragm system works

The Blagdon pump is basically two pumps in one. Chambers A&B are alternatively filled and emptied by drawing fluid in through a common inlet (C) and out through a common outlet (D). The diaphragms in each chamber are linked by a common shaft so that they move backwards and forwards in unison. Compressed air is directed by the air valve (E) alternatively behind each diaphragm to power discharge strokes. Pump speed and therefore fluid flowrate can be infinitely controlled by increasing or decreasing air pressure and / or volume.

Operation sequenceThe red arrows show the pump cycle. Fluid is being drawn into inlet (C) by the suction stroke of the diaphragm in chamber B, which opens the ball valve (2) to allow liquid to enter the chamber. Ball valve (4) is closed by the diaphragm suction.

In chamber (A) air has been applied to the rear of the diaphragm to force out the liquid in the chamber through the ball valve (3) to the liquid outlet (D). This discharge stroke closes ball valve (1) to prevent further liquid entering the chamber. This cycle is repeated to provide a continuous flow to outlet D.

Standard Blagdon pumps are 1:1 ratio. Maximum outlet pressure cannot exceed air supply pressure. Blagdon also offer 2:1 ratio high pressure pumps.

Blagdon offer an extensive pump range for handling fluid media safely and cost effectively.We offer low cost ownership, by combining high quality wear parts with low price spares and a vast array of accessories. A flexible modular design of pumps means we can offer short lead times and a high degree of customising opportunities. Our experienced staff can provide instant support for installation, servicing, maintenance or a technical enquiry. We offer a fast spares delivery service, many items being in stock for immediate delivery.

4 www.blagdonpump.com

The benefits you get from a Blagdon Pump

11 key features and benefits of a Blagdon Pump

1. Blagdon pumps can run dry without damage or danger.

2. They are fully submersible.

3. They are designed to operate at low noise levels.

4. They have leak-free air valves that are easily removed for servicing.

5. They can be easily maintained. They can be stripped down quickly without

any specialist tools.

6. They are self-priming to over 6 metres.

7. They are pressure balanced. They stall if discharge is closed and restart

when discharge is opened so avoiding heat build up and wearing of components.

8. They have minimum product agitation.

9 . They have long stroke, slow speed cycling capability for low initial break out.

10. They are portable and compact-can be remotely controlled and fully packaged.

11. Safe in hazardous areas, no sparking, air-driven.

A full list of chemicals and

recommended elastomers is

available on request, or our sales

office can advise on the best pump

and materials for specific media.

Typical range of products you can pump.

Clay slip, titanium dioxide,

mill scale.

All mineral and organic acids.

Solvent and water based.

Chemicals.

Acids.

Cement, mortar.

Slip, glazes, clay.

Creams, emulsions,

detergents.

Mud, grout, lubricants.

Soft drinks, spirits, beer, wine,

milk.

Suspensions of gun

powder, explosives, etc.

Liquid and semi-solid foods,

flavourings.

Printing inks, dryers, dyes,

sizes and solvents.

Petrol, diesel, hydraulic and cutting

oils, lube oils, animal and vegetable oils

and greases.

Emulsions, latexes, pigments,

solvents, resins, thinners.

Liquids, creams

and compounds.

Aggressive acids, salts, sludge

and effluents.

Paper, wood, sizes, bleaches.

Natural and synthetics, water

and solvent based, monomeric and

polymeric plastics.

Gum, latex.

Sewage, effluents,

coal and lime slurry.

Aromatic and aliphatics,

ketones, aldehydes, esters and chlorinated

hydrocarbons, de-icing fluids.

Creosote,

turpentine, copper napthenate.

All types.

! ABRASIVES:

! ACIDS:

! ADHESIVE:

! ALCOHOLS:

! CAUSTICS:

! CEMENT:

! CERAMICS:

! COSMETICS:

! DRILLING:

! DRINKS:

! EXPLOSIVES:

! FOODS:

! INKS & DYES:

! OILS:

! PAINT:

! PHARMACEUTICALS:

! PLATING:

! PULPS:

! RESINS:

! RUBBER:

! SLUDGE & WASTE:

! SOLVENTS:

! TIMBER PRESERVATIVES:

! WATER:

5

The media Blagdon Pump can handle

SAFE FOR HAZARDOUS AREASSAFE FOR HAZARDOUS AREASPERMANENT OR PORTABLE OPTIONSPERMANENT OR PORTABLE OPTIONS

SUBMERGED OPERATIONSUBMERGED OPERATION

SELF PRIMINGSELF PRIMING FILLING/INJECTION/DOSINGFILLING/INJECTION/DOSING

HOPPER TYPE FOR HIGH VISCOSITYHOPPER TYPE FOR HIGH VISCOSITY

Pump DutiesBlagdon pumps can be installed in any of the models illustrated to perform the following duties: Liquid Transfer, Slurry Handling, Filter Feeding, Circulation, De-watering, Low Pressure Spray Supply, Tank/Sump/Barrel/Drum Filling and emptying, Batching/Mixing/Metering/Dosing, and Chemical Injection etc.

www.blagdonpump.com

Blagdon - Portfolio Information

Diaphragm & Ball Valve Options - Uses, Temperature Limits & Specific Gravity

Aggressive chemicals and most solvents. High temperature uses

N/A

Caustic solutions and dilute acids. Excellent abrasion resistance

Aggressive chemicals and solvents but with low abrasion resistance

Excellent abrasion resistance, dirty water, oils and hydrocarbons

High mechanical strength. Suitable with most oils, solvents and hydrocarbons

Excellent abrasion resistance. Widely used in the ceramics industry on dirty water, clays, grout etc

General purpose for use on water, most hydrocarbons and mild chemicals

Caustic solutions and dilute acids. Poor on oils and solvents

General purpose for use on water, most hydrocarbons and mild chemicals

Main Properties and Uses Min Optimum

Operating Temperatures

DiaphragmPump Model/Size/Material

-18F-28C

-11F-24C

50 to 140F10 to 60C

50 to 140F10 to 60C

50 to 140F10 to 60C

50 to 130F10 to 54C

50 to 130F10 to 54C

50 to 130F10 to 54C

50 to 212F10 to 100C

50 to 140F10 to 60C

-10F-23C

-4F-20C

-40F-40C

-40F-40C

32F0C

-10F-23C

N/A N/A

0F-18C

Elastomer

Buna-N

EPDM

Geolast

Neoprene

Polyester

Polyurethane

PTFE

Santoprene

Stainless Steel

Viton

B06 - 1/4" Stainless Steel

B25 - 1” Aluminium

B40 - 1 1/2” Stainless Steel

X75 - 3” Cast Iron

B15 - 1/2” Polypropylene

B50 - 2” PVDF

B25 - 1” Full Flow 2:1

B50 - 2” Stainless Steel

B15 - 1/2” Aluminium

Me

tallic

Pu

mp

sN

on

-Me

tallic

Pu

mp

sH

ygie

nic

Pu

mps

FD

AP

um

ps

Hig

hP

ress

ure

Pu

mps

PT

FE

P

um

ps

B40 - 1 1/2” Aluminium

B50 - 2” Stainless Steel

B06 - 1/4" PVDF

B25 - 1” PVDF

B50 - 2” Hygienic

B25 - 1” Stainless Steel

B25 - 1” Conductive PTFE

B25 - 1” Cast Iron

B50 - 2” Aluminium

X75 - 3” Stainless Steel

B15 - 1/2” PVDF

B15 - 1/2” Hygienic

B50 - 2” Full Flow 2:1

B15 - 1/2” Conductive PTFE

B15 - 1/2” Stainless Steel

B40 - 1 1/2” Cast Iron

X75 - 3” Aluminium

B10 - 3/8” Polypropylene

B50 - 2” Polypropylene

B25 - 1” Standard 2:1

B40 - 1 1/2” Stainless Steel

B25 - 1” Stainless Steel

B50 - 2” Cast Iron

B06 - 1/4" Polypropylene

B25 - 1” Polypropylene

B25 - 1” Hygienic

B15 - 1/2” Stainless Steel

B15 - 1/2” Virgin PTFE

75 to 212F24 to 100C

!!!!!!!!!!!!!!

!!!!!!

!!!

!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!

!

!!!!!!!!!!!!

!!

!!!!!!

!!!

!!!!!!!!!!!!!!!

!!!!!!

!!!

B25 - 1” Virgin PTFE

Fluid Contact Materials Air Chamber Materials

!

!!

!

!

!

!

!

!

!!!

!

!

!

!

!

!

!

!

!

!!!

!

!!

!

!

!

!

!

!

!!!!!!!

!!!

!!!!!!!!!!!!!!

!!!

!!

!!

!!

!!

!

!!!

!!!!

!!!

!

!

!

!

!

!!!!!!

!!

!!!!!!

!!!!!!

!

Co

nd

uct

ive

PT

FE

Virg

in P

TF

E

Alu

min

ium

Ca

st Iro

n

PV

DF

Po

lyp

rop

yle

ne

Sta

inle

ss S

tee

l

Po

lish

ed

Sta

inle

ss

Alu

min

ium

Ca

st Iro

n

Nic

kel P

late

d A

lum

iniu

m

Po

lyp

rop

yle

ne

Sta

inle

ss S

tee

l

Ep

oxy

Co

ate

d A

lum

iniu

m

Ep

oxy

Co

ate

d S

tain

less

Ste

el

Co

nd

uct

ive

PT

FE

Bu

na

-N

EP

DM

(In

c. F

oo

d G

rad

e)

Ge

ola

st

Po

lye

ste

r (H

yte

l)

Ne

op

ren

e

Viscosity Guide This table is a guide only – cps = centipoise

SA

E 7

0 O

il1

76

40

cp

s

Wa

ter

1 c

ps

Tom

ato

Juic

e17

6 cp

s

SA

E 3

0 O

il3

52

cp

s

Gly

ce

rin

e8

80

cp

s

SA

E 5

0 O

il1

56

1 c

ps

Glu

e3

00

0 c

ps

May

on

nai

se50

00 c

ps

Mo

lass

es B

8640

cp

s

So

ur

Cre

am15

200

cps

!!!!!!!!!!!!!!!!!

!!!!!!

!!!

!!!!!!!!!!!!!!

!!!!!!

!!!

!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!

!!!!!!

!!!

!!!!!!!!!!!!

!!

!!!!!!!!!!!!!!!!

!!!!!!!

!!!

!!

!!

!!!

!!!!!!!!!!!!!!!!!!!!!!!!

!!!

!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!

!!!

!!!!!!!!!!!!

!!!!

!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!

!!!!

!!!!!!

!!!

!!!!

Ball Valve S.G.

Materials Ball Valve Materials Max. Flow Max. Op PressureAir Inlet Max. SolidSize (mm)

Fluid Connections

Max Standard Weighted

B50 - 2” Pumps Maximum 12000

X75 - 3” Pumps Maximum 25000

B06 - 1/4” Pumps

B10 - 3/8” Pumps

Maximum 2000

1 200 500 1000 2000 4000 10000 15000

Maximum 2000

B40 - 1 1/2” Pumps Maximum 12000

B15 - 1/2” Pumps Maximum 5000

B25 - 1” Pumps Maximum 5000

7.80 N/AN/A

1.80 3.2

0.98 N/A

N/A N/A

N/A N/A

N/A N/A

1.23 2.64

1.0 N/A

1.23 2.64

1.23 2.64

356F180C

212F100C

356F180C

158F70C

158F70C

212F100C

212F100C

212F100C

176F80C

34

34

11

11

120

76

40

14

80

28

20

114

31

17

120

120

34

34

11

11

6

4

4

202

202

202

120

120

120

76

76

76

40

40

40

14

14

4

154

154

48

48

530

320

180

60

350

125

86

500

136

75

530

530

154

154

48

48

26

16

16

889

889

889

530

530

530

320

320

320

180

180

180

60

60

18

2”

1 1/2”

1”

1/2”

2”

1”

1”

3/8”

1/4”

1/4”

3”

3”

3”

2”

2”

2”

1 1/2”

1 1/2”

1 1/2”

1”

1”

1”

1/2”

1/2”

1/4”

2” 150 RF

2” 150 RF

1” 150 RF

1” 150 RF

1/2” 150 RF

1/2” 150 RF

2”

1”

1”

3/8”

3/8”

1/4”

1/4”

3/4”

3/8”

3/8”

1/4”

3/4”

3/8”

1/4”

3/4”

3/8”

1/4”

3/4”

3/4”

3/8”

3/8”

1/4”

1/4”

1/4”

1/4”

1/4”

3/4”

3/4”

3/4”

3/4”

3/4”

3/4”

3/8”

3/8”

3/8”

3/8”

3/8”

3/8”

1/4”

1/4”

1/4”

7

7

7

7

8.6

8.6

8.6

8.6

8.6

8.6

8.6

8.6

8.6

8.6

8.6

8.6

8

8

8

8

7

5

5

8.6

8.6

8.6

8.6

8.6

8.6

8.6

8.6

8.6

8.6

8.6

8.6

8.6

8.6

8.6

100

100

100

100

125

125

125

125

125

125

125

125

125

125

125

125

116

116

116

116

100

72

72

125

125

125

125

125

125

125

125

125

125

125

125

125

125

125

3

3

2

2

6

6

3

2

6

3

3

10

3

2

6

6

3

3

2

2

2

2

2

10

10

10

6

6

6

6

6

6

3

3

3

2

2

2

PT

FE

(O

ne

Pie

ce)

Po

lyu

reth

an

e

Sa

ntr

op

ren

e

PT

FE

Vito

n

Bu

na

-N

EP

DM

(In

c. F

oo

d G

rad

e)

Ne

op

ren

e

Sa

nto

pre

ne

Sta

inle

ss S

tee

l

PT

FE

Vito

n

UK

GP

M

L/M

in

BS

P(F

)

AN

SI F

lan

ge

RJT

(M)

BS

P(F

)

Ba

r

PS

I

1/2” 150 RF

1/2” 150 RF

1” 150 RF

1” 150 RF

An ink pumping and mixing plant at Amcor Packaging in Australia using Blagdon 15 moulded pumps.

Fully automated Rexson ink manufacturing plant. Blagdon 25 metallic pumps are used for mixing and recirculation.

Blagdon 75 pump transferring paint from dispenser toblending vessel.

8 www.blagdonpump.com

The Products – Blagdon Pumps in action

9www.blagdonpump.com

Blagdon 06 moulded pumps being used by DuracoIndustries, Singapore, for chemical injection at a waste treatment plant.

Blagdon 50 pumps feeding a ring main for final blending at a coatings producer.

Part of the filtration process at a major multi-national paint manufacturer where Blagdon 50 pumps are used to supply the fully automated filling line.

This Blagdon 25 metallic pump at Caradon Bathroom is feeding a robotic spray glazing operation.

2 Blagdon pumps at Royal Doulton pottery works. The unit at the rear pumped clay slip for 8 years without change of diaphragm, ball valves or valve seats.

Blagdon 25 moulded Kynar pumps transferring hydroflouric acid.

Blagdon 25 metallic pump at a major chemical plant in Northern England.

TECHNICAL DATA;

NON METALLIC SERIES B06POLYPROPYLENE & PVDF

Shipping Weights:

Shipping Dimensions:

Maximum Delivery: 16 ltrs/min

Max. working Pressure: 5 bar

Max. Solid Particle Size: 2 mm.

Air Inlet: 1/4" BSP(F)

Temperature Limits: Determined by Elastomers

Suction Lift (Dry): 1.5 m.

Suction Lift (Wet): 4.1 m.

Fluid Inlet/Outlet: 1/4" BSP(F)

Installation: Wall or surface mounted

Accessories Included: Exhaust air Silencer

Polypropylene 1.7 kg.

PVDF 1.9 kg.

240 x 180 x 200 mm.

Simple construction, easy to maintain.Self priming, ideal for emptying containers.Pressures to 5 bar.Flow rates up to 16 litres/minute.Bolted construction for safety.Low break out pressure requirement.Reliable pneumatic air valve system.

Note: The above performance curve has been determined under the

following conditions: flooded suction, pumping clean water through a

calibrated electronic flow meter with pulsation dampener and silencer fitted.

Example above: B06.PP.BB.TTP refers to B06

model with Polypropylene wetted components, Glass

filled Polypropylene non-wetted components, with PTFE

Diaphragms and Valve Balls and Polypropylene Seats.

MODEL - BO6

WETTED COMPONENTSP : POLYPROPYLENEK : KYNAR (PVDF)

VALVE SEATSP : POLYPROPYLENEK : KYNAR (PVDF)

VALVE BALLST : PTFE

®V : VITONS : 316 STAINLESS STEEL

DIAPHRAGMSE : EPDMH : POLYESTER

®R : SANTOPRENET : PTFE

®V : VITONO : ONE PIECE PTFE

NON-WETTED COMPONENTSP : POLYPROPYRENE (Glass filled)

VALVE TYPEB : BALL

SUCTION ORIENTATIONB : BOTTOM

Moulded Non Metallic Series

10

B 06 Air Operated Diaphragm Pump Range

TYPICAL CODE = B06. PP. BB. TTP

Performance curve

www.blagdonpump.com

p(14.

si5 )

0 Bar1.

( 9 i2

ps )

02 ar

. B

s

(4 . )

3 5 p i

4.0 Bar58 psi)

(

A0 ar

PS

5. BIR RES

URE

si

( 2.5)

7 p

10

0 2

0.4

4

0.8

6

1.3

8

1.7

10

2.2

12

2.6

14

3.0

20

20

0

30

40

40

60

80

50

ME

TR

ES

HE

AD

(2 CFM)

33.5 M /hr

32 M /hr AIR CONSUMPTION(1.2 CFM)

(3.5 CFM)

36 M /hr

(5.8 CFM)

310 M /hr

(7.6 CFM)

313 M /hr

16

3.5

18

3.9 UK Gall/min

L/min

PS

I H

EA

D

FE

ET

HE

AD

FLUID FLOW RATE

33

66

98

131

164

3.0

arB

12696

84

154

80.5

138

63

SILENCER

120 (WITH SILENCER FITTED)

17194

107

59 188

BLAGDON LABEL INCLUDING PUMP MODEL & SERIAL NO. FASTENEDTO MANIFOLD

4 MOUNTING HOLES Ø 6.0 IN

POSITION SHOWN

23

11

Simple construction, easy to maintain.Self priming, ideal for emptying containers.High quality investment cast design.Pressures to 8.6 bar.Flow rates up to 18 litres/minute.Bolted construction for safety.Reliable pneumatic air valve system.Constructed from 316L Stainless steel.

Note: The above performance curve has been determined under the

following conditions: flooded suction, pumping clean water through a

calibrated electronic flow meter with pulsation dampener and silencer fitted.

www.blagdonpump.com

Metallic Series

TECHNICAL DATA;

METALLIC SERIES B06STAINLESS STEEL

Shipping Weights:

Shipping Dimensions:

Maximum Delivery: 18 Itrs/min

Max. Working Pressure: 8.6 bar

Max. Solid Particle Size: 2 mm.

Air Inlet: 1/4" BSP(F)

Temperature Limits: Determined by Elastomers

Suction Lift (Dry): 1.5 m.

Suction Lift (Wet): 4.1 m.

Fluid Inlet/Outlet: 1/4" BSP(F)

Installation: Wall or surface mounted

Accessories Included: Exhaust air Silencer

Stainless Steel 3.7 kg.

240 x 180 x 200 mm.

MODEL - B06: Standard X06: ATEX approved

DESIGN LEVELVALVE SEATSS : 316L STAINLESS STEEL

VALVE BALLST : PTFEV : VITONS : 316 STAINLESS STEEL

DIAPHRAGMSE : EPDMH : POLYESTERR : SANTOPRENET : PTFEV : VITONO : ONE PIECE PTFE

WETTED COMPONENTSS : 316L STAINLESS STEEL

NON-WETTED COMPONENTSS : 316L STAINLESS STEEL

VALVE TYPEB : BALL

SUCTION ORIENTATIONB : BOTTOM

TYPICAL CODE = B06. 01. SS. BB. TTS

Performance curve

Air Operated Diaphragm Pump Range B 06

(3.5 CFM)

36 M /hr

30

0

10

20

(psi

14.5 )

1.0 Bar

2

0.4

4

0.7 1.0

( 9 si)2 p

Ba.02r

4(i)

3.5 ps

.0 B r3

a

6

1.4

8

1.8

s p)

(87i

40

50

60

70

90

(2 CFM)

33.5 M /hr

( p )58 si

(101i)

ps

0ar

7B.

5 psi)

(12

32 M /hr AIR CONSUMPTION(1.2 CFM)

L/min

4.0

14

2.5

10

2.2

12

2.9

16

3.3

18

3.7

(7.6 CFM)

313 M /hr

Gall/min

(5.8 CFM)

310 M /hr

PS

I H

EA

D

0

40

20

60

80

100

120

33

0

66

99

131

197

164

230

262

FLUID FLOW RATE

ME

TR

ES

HE

AD

FE

ET

HE

AD

i7 5 ps

( 2. )4. ar B0

5 0 B. ar

6. a0 B

r

80

B6 ar

IP

EURE

8.

AR

RS

S

SILENCER

112

98

123 33

15.5

122 148.5

189 (MANIFOLDS IN–LINE)

94.5

171110

76.5 AIR INLET

4 MOUNTING HOLESØ 6.5

AIR INLET1/4” BSP(F)

FLUID INLET1/4” BSP(F)

FLUID INLET1/4” BSP(F)

Simple construction, easy to maintain.Self priming, ideal for emptying containers.Strong, robust design.Pressures to 8 bar.Flow rates up to 48 litres/minute.Flanged or screwed end connections.Pneumatic air valve, reliable and easy.

Note: The above performance curve has been determined under the

following conditions: flooded suction, pumping clean water through a

calibrated electronic flow meter with pulsation dampener and silencer fitted.

TECHNICAL DATA;

MOULDED NON METALLICSERIES B15 POLYPROPYLENE & PVDF

Shipping Weights:

Shipping Dimensions:

Maximum Delivery: 48 Itrs/min

Max. Working Pressure: 8 bar

Max. Solid Particle Size: 2 mm.

Air Inlet: 1/4" BSP(F)

Temperature Limits: Determined by Elastomers

Suction Lift (Dry): 4.6 m.

Suction Lift (Wet): 6.1 m.

Fluid Inlet/Outlet: 1/2" ANSI #150 RF Flanged

Installation: Wall or surface mounted

Accessories Included: Exhaust air Silencer

Polypropylene/Aluminium 5.3kg.

PVDF/Aluminium 7kg.

Polypropylene/Stainless 12kg.

Steel

PVDF/Stainless Steel 13.5kg.

320 x 200 x 340 mm.

MODEL - B15

DESIGN LEVEL

VALVE SEATSB : BUNA-N K : KYNAR (PVDF)E : EPDM V : VITONN : NEOPRENEP : POLYPROPYLENE

VALVE BALLSB : BUNA-N T : PTFEE : EPDM V : VITONN : NEOPRENES : 316 STAINLESS STEEL

DIAPHRAGMSB : BUNA-N P : POLYPROPYLENEE : EPDM R : SANTOPRENEH : POLYESTER T : PTFEN : NEOPRENE V : VITONO : ONE PIECE PTFE

WETTED COMPONENTSP : POLYPROPYLENEK : KYNAR (PVDF)

NON-WETTED COMPONENTST : EPOXY COATED ALUMINIUMW: EPOXY COATED STAINLESS STEEL

VALVE TYPEB : BALL

SUCTION ORIENTATIONB : BOTTOM

TYPICAL CODE = B15. 01. PT. BB. TTP

Performance curve

B 15 Air Operated Diaphragm Pump Range

Moulded Non Metallic Series

12 www.blagdonpump.com

B8 ar(11 p

i6

s )

B7 ar(

pi

101.5 s )6 B r a(87

si p

)

5 Bar7p )

( 2.5 si

4 Bar( 8 ps )5 i

3 Bar(43i)

.5 ps

2 Bar2

)( 9 psi

1. Bar R R S

5 AI P E SURE21.7p i)

(s

ME

TR

ES

HE

AD

30

0

10

20

2 4

FLUID FLOWRATE

6 8

60

40

50

70

80

(5.3 CFM)

9 M /hr3

(6.5 CFM)

11 M /hr3 21 M /hr3

(12.4 CFM) (17.6 CFM)

30 M /hr3

FE

ET

HE

AD

99

12 - UK GPM10

0

33

66

197

131

164

230

266

PS

I H

EA

D

42.6

28.4

14.2

0

113.6

99.4

71.0

56.8

85.2

10 20 30 40 50 L/MIN

287 IN–LINE MANIFOLDS

208 304

51

133

260210

77

143.5

9

20

85

170

20

84

MOUNTINGSLOTS

259

155 AIR INLET

AIR EXHAUST1/4” BSP

SUCTION INLET1/2” ANSI

150 FLANGE

DISCHARGEOUTLET

1/2” ANSI150 FLANGE

Simple construction, easy to maintain.Self priming, ideal for emptying containers.Pressures to 8.6 bar.Flow rates up to 54 litres/minute.Bolted construction for greater integrity.Reliable pneumatic air valve design.Portable.

Note: The above performance curve has been determined under the

following conditions: flooded suction, pumping clean water through a

calibrated electronic flow meter with pulsation dampener and silencer fitted.

TECHNICAL DATA;

METALLIC SERIES B15ALUMINIUM

Shipping Weights:

Shipping Dimensions:

Maximum Delivery: 60 Itrs/min

Max. Working Pressure: 8.6 bar

Max. Solid Particle Size: 2 mm.

Air Inlet: 1/4" BSP(F)

Temperature Limits: Determined by Elastomers

Suction Lift (Dry): 4.6 m.

Suction Lift (Wet): 6.1 m.

Fluid Inlet/Outlet: 1/2" BSP(F)

Installation: Wall or surface mounted

Accessories Included: Exhaust air Silencer

Aluminium 5.9 kg.

320 x 200 x 340 mm.

TYPICAL CODE = B15. 01. AA. BB. TTS

Performance curve

B 15Air Operated Diaphragm Pump Range

Metallic Series

13

MODEL - B15 : Standard X15 : ATEX approved

DESIGN LEVEL

VALVE SEATSA : ALUMINIUMB : BUNA-NE : EPDMN : NEOPRENEV : VITONS : 316 STAILESS STEEL

VALVE BALLSB : BUNA-N V : VITONE : EPDM T : PTFEN : NEOPRENES : 316 STAILESS STEEL

DIAPHRAGMSB : BUNA-N P : POLYURETHANEE : EPDM R : SANTOPRENEH : POLYESTER T : PTFEN : NEOPRENE V : VITONO : ONE PIECE PTFE

WETTED COMPONENTSA : ALUMINUM

NON-WETTED COMPONENTSA : ALUMINIUM

VALVE TYPEB : BALL

SUCTION ORIENTATIONB : BOTTOM

FLUID FLOW RATE

ME

TR

ES

HE

AD

30

20

20

40

10

10

2

6

20

4

30

8

85

80

70

50

4060

80

100

120

60

FE

ET

HE

AD

- UK GPM10 12 14

L/MIN

50

100

250

150

200

PS

I H

EA

D

0

277

40 50 60 70 -

100 83

25

245.5

127.583 44

203.5

89

120

233160

127.5

124.5AIR INLET

FLUID DISCHARGE1/2” BSP

AIR INLET1/4” BSP

AIR EXHAUST1/4” BSP

FLUID SUCTION1/2” BSP

Ø 7mmMOUNTING HOLES

8.0 Bar AIR PRESSURE

(116psi)

7 0r

. Ba( 0. s

11 5 p i)

6.0 Bar(87 psi)

0 B5. ar72.

(5 psi)

4 0 B.ar58

(psi)

3.0 Bar43. ps )

(5 i

2.0 Bar29.s )

(0 p i

1.5 Bar7

(21. psi)

310 M /hr(5.8 CFM)

335 M /hr(20.6 CFM)

320 M /hr(11.7 CFM)

315 M /hr AIR CONSUMPTION(8.8 CFM)

www.blagdonpump.com

Simple construction, easy to maintainSelf priming, ideal for emptyingPressures to 8.6 barFlow rates up to 60 litres/minuteBolted construction for greater integrity316L Stainless steel

TECHNICAL DATA;

METALLIC SERIES B15STAINLESS STEEL

Shipping Weights:

Shipping Dimensions:

Maximum Delivery: 60 Itrs/min

Max. Working Pressure: 8.6 bar

Max. Solid Particle Size: 2 mm.

Air Inlet: 1/4" BSP(F)

Temperature Limits: Determined by Elastomers

Suction Lift (Dry): 4.6 m.

Suction Lift (Wet): 6.1 m.

Fluid Inlet/Outlet: 1/2" BSP(F)

Installation: Wall or surface mounted

Accessories Included: Exhaust air Silencer

Stainless Steel/Aluminium 9.7 kg.

Stainless Steel 15 kg.

320 x 200 x 340 mm.

TYPICAL CODE = B15. 01. SA. BB. TTS

Performance curve

Metallic Series

14

MODEL - B15 : Standard X15 : ATEX approved

DESIGN LEVELVALVE SEATSS : 316 STAINLESS STEEL

VALVE BALLSB : BUNA-N T : PTFEE : EPDM V : VITONN : NEOPRENES : 316 STAINLESS STEEL

DIAPHRAGMSB : BUNA-N P : POLYURETHANEE : EPDM R : SANTOPRENEH : POLYESTER T : PTFEN : NEOPRENE V : VITONO : ONE PIECE PTFE

WETTED COMPONENTSS : 316 STAINLESS STEEL

NON-WETTED COMPONENTSA : ALUMINIUMS : 316 STAINLESS STEEL

VALVE TYPEB : BALL

SUCTION ORIENTATIONB : BOTTOM

261

188

94

25

201

288 IN–LINE MANIFOLD OPTION

241

126 AIR INLET

AIR INLET1/4” BSP

156

75FLUID DISCHARGE1/2” BSP

AIR EXHAUST1/4” BSP

FLUIDSUCTION1/2” BSP

172

Ø 7MOUNTING

HOLES

Note: The above performance curve has been determined under the

following conditions: flooded suction, pumping clean water through a

calibrated electronic flow meter with pulsation dampener and silencer fitted.

FLUID FLOW RATE

ME

TR

ES

HE

AD

30

20

20

40

10

10

2

6

20

4

30

8

85

80

70

50

4060

80

100

120

60

FE

ET

HE

AD

- UK GPM10 12 14

L/MIN

50

100

250

150

200

PS

I H

EA

D

0

277

40 50 60 70 -

8.0 Bar AIR PRESSURE

(116psi)

7 0r

. Ba( 0. s

11 5 p i)

6.0 Bar(87 psi)

0 B5. ar72.

(5 psi)

4 0 B.ar58

(psi)

3.0 Bar43. ps )

(5 i

2.0 Bar29.s )

(0 p i

1.5 Bar7

(21. psi)

310 M /hr(5.8 CFM)

335 M /hr(20.6 CFM)

320 M /hr(11.7 CFM)

315 M /hr AIR CONSUMPTION(8.8 CFM)

B 15 Air Operated Diaphragm Pump Range

www.blagdonpump.com

Simple construction, easy to maintainAvailable in virgin and conductive PTFEChemically inertFlanged end connectionsAtex approved - intrinsically safeReliable, proven pneumatic air valveStrong, robust design

MODEL - B15 : StandardX15 : ATEX approved

DESIGN LEVELVALVE SEATST : PTFE

VALVE BALLST : PTFE

DIAPHRAGMST : PTFEX : PTFE/VITON (HIGHT TEMP.)

WETTED COMPONENTST : PTFE4 : CONDUCTIVE PTFE

NON-WETTED COMPONENTS4 : CONDUCTIVE PTFE5 : POLYETHYLENE (HDPE)S : 316 STAINLESS STEEL

VALVE TYPEB : BALLW: WEIGHTED

SUCTION ORIENTATIONB : BOTTOM

15

B8 ar(11 p

i6

s )

B7 ar(

pi

101.5 s )6 B r a(87

si p

)

5 Bar7p )

( 2.5 si

4 Bar( 8 ps )5 i

3 Bar(43i)

.5 ps

2 Bar2

)( 9 psi

1. Bar R R S

5 AI P E SURE21.7p i)

(s

ME

TR

ES

HE

AD

30

0

10

20

2 4

FLUID FLOWRATE

6 8

60

40

50

70

80

(5.3 CFM)

9 M /hr3

(6.5 CFM)

11 M /hr3 21 M /hr3

(12.4 CFM) (17.6 CFM)

30 M /hr3

FE

ET

HE

AD

99

12 - UK GPM10

0

33

66

197

131

164

230

266

PS

I H

EA

D

42.6

28.4

14.2

0

113.6

99.4

71.0

56.8

85.2

10 20 30 40 50 L/MIN

Note: The above performance curve has been determined under the

following conditions: flooded suction, pumping clean water through a

calibrated electronic flow meter with pulsation dampener and silencer fitter.

Performance curve

TECHNICAL DATA;

NON METALLIC SERIES B15CONDUCTIVE / VIRGIN PTFE

Shipping Weights:

Shipping Dimensions:

Maximum Delivery: 48 Itrs/min

Max. Working Pressure: 7 bar

Max. Solid Particle Size: 2 mm.

Air Inlet: 1/4" BSP(F)

Temperature Limits: Determined by Elastomers

Suction Lift (Dry): 4.6 m.

Suction Lift (Wet): 6.1 m.

Fluid Inlet/Outlet: 1/2" ANSI #150 RF Flanged

Installation: Wall or surface mounted

Accessories Included: Exhaust air Silencer

Conductive PTFE 16 kg.

Virgin PTFE 16 kg.

335 x 215 x 335 mm.

TYPICAL CODE = B15. 00. TS. BB.TTT

PTFE Non Metallic Series

B 15Air Operated Diaphragm Pump Range

www.blagdonpump.com

Ø 40 MOUNTING PADS FASTENED THRO’ WITH M6

SOCKET CAP SCREWS

158

Ø93

31.5

311.5

265

273.5

212

53

54

108

150

160 BODY DIA.

AIR INLET1/4” BSP

88

159AIR

INLET

GROUNDING LEAD - ATTACHED TO OUTER COVER.(ATEX CERTIFIED MODELS ONLY)

169

285AIR EXHAUST1/4” BSP

90.5

Range of DIN/RJT and Ferrule connectionsSelf priming, for emptying containersFood grade elastomers-EPDM/PTFEPressures to 8.6 barCertified CIP cleanableEU Design approval

Note: The above performance curve has been determined under the

following conditions: flooded suction, pumping clean water through a

calibrated electronic flow meter with pulsation dampener and silencer fitted.

TECHNICAL DATA;

HYGIENIC SERIES B15STAINLESS STEEL

Shipping Weights:

Shipping Dimensions:

Maximum Delivery: 60 Itrs/min

Max. Working Pressure: 8.6 bar

Max. Solid Particle Size: 2 mm.

Air Inlet: 1/4" BSP(F)

Temperature Limits: Determined by Elastomers

Suction Lift (Dry): 4.6 m.

Suction Lift (Wet): 6.1 m.

Fluid Inlet/Outlet: 1" RJT (Standard)

Installation: Wall or surface mounted

Accessories Included: Exhaust air silencer

Stainless Steel/Aluminium 10.5 kg.

Stainless Steel 15.8 kg.

320 x 210 x 390 mm.

TYPICAL CODE = B15.01. ZF. BB. EEE

Performance curve

Hygienic Series

16

MODEL - B15 StandardX15: ATEX approved

DESIGN LEVELVALVE SEATSE : FOOD GRADE EPDM

VALVE BALLSE : FOOD GRADE EPDMT : PTFES : 316 STAINLESS STEEL

DIAPHRAGMSE : FOOD GRADE EPDMT : PTFEO : ONE PIECE PTFE

WETTED COMPONENTSZ : 316 STAINLESS STEEL

(POLISHED)

NON-WETTED COMPONENTSS : 316 STAINLESS STEELF : NICKEL PLATED ALUMINIUM

VALVE TYPEB : BALL

SUCTION ORIENTATIONB : BOTTOM

FLUID FLOW RATE

50

100

150

20

40

60

80

100

120

PS

I H

EA

D

FE

ET

HE

AD

200

250

280

ME

TR

ES

HE

AD

2

10

20

30

84 6

10 12 1814 16 - UK GAL/MIN

40

50

60

70

80

85

10 20 30 40 50 60 70 80 - L/MIN

112 130

33.5

296 160

83

288342

132

4MOUNTINGHOLES Ø9

SUCTION INLET1” MALE RJT

170AIR INLET

AIR INLET1/4” BSP(F)

SILENCER1/4” BSP

DISCHARGE OUTLET1” MALE RJT

www.blagdonpump.com

B 15 Air Operated Diaphragm Pump Range

330 M /hr(17.6 CFM)

310 M /hr(5.8 CFM)

320 M /hr(11.7 CFM)

315 M /hr AIR CONSUMPTION(8.8 CFM)

a

R

PRESUR

8 Br AI

SE

(16 psi)

1

7.0 Bar(101.5 psi)

6.0 Bar(87 psi)

a5.0 B r(72.5 psi)

4 0 B r.

a(5 psi)8

r3.0 Ba4

)

( 3.5 psi

0r

2. Ba2 0

)

( 9. psi

1.5 Bar21.7 p

(si)

Materials options suitable for a wide range of chemicalsSimple construction, easy to maintainSelf priming, ideal for emptying containersPressures to 8 barFlow rates up to 154 litres/minuteFlanged or screwed end connectionsReliable, pneumatic air valveStrong, robust design, bolted construction

Note: The above performance curve has been determined under the

following conditions: flooded suction, pumping clean water through a

calibrated electronic flow meter with pulsation dampener and silencer fitted.

TECHNICAL DATA;

MOULDED NON METALLIC SERIES B25POLYPROPYLENE AND PVDF

Shipping Weights:

Shipping Dimensions:

Maximum Delivery: 152 Itrs/min

Max. Working Pressure: 8 bar

Max. Solid Particle Size: 3 mm.

Air Inlet: 3/8" BSP(F)

Temperature Limits: Determined by Elastomers

Suction Lift (Dry): 6.1 m.

Suction Lift (Wet): 7.6 m.

Fluid Inlet/Outlet: 1" ANSI # 150 Flanged RF

Installation: Wall or surface mounted

Accessories Included: Exhaust air Silencer

Polypropylene/Aluminium 13.5 kg.

PVDF/Aluminium 18 kg.

Polypropylene/Stainless Steel 18 kg.

PVDF/Stainless Steel 20 kg.

440 x 260 x 470 mm.

TYPICAL CODE = B25. PT. BB. EEP

Performance curve

Moulded Non Metallic Series

17

MODEL - B25

WETTED COMPONENTSP : POLYPROPYLENEK : KYNAR (PVDF)

VALVE SEATSB : BUNA-N N : NEOPRENEE : EPDMK : KYNAR (PVDF)P : POLYPROPYLENE

VALVE BALLSB : BUNA-N T : PTFEE : EPDM V : VITONN : NEOPRENES : STAINLESS STEEL

DIAPHRAGMSB : BUNA-N T : PTFEE : EPDM V : VITONH : POLYESTER (HYTREL)N : NEOPRENEP : POLYURETHENER : SANTOPRENEO : ONE-PIECE PTFE

NON-WETTED COMPONENTST : ALUMINIUM / EPOXY PAINTEDW: STAINLESS STEEL/EPOXY PAINTED

VALVE TYPEB : BALLW: WEIGHTED

SUCTION ORIENTATIONB : BOTTOM

ME

TR

ES

HE

AD

99 FE

ET

HE

AD

3042.6

0

14.2

0

28.4

0

10

20

FLUID FLOWRATE

5 10 15 - UK GPM20

0

33

66

60

85.2

PS

I H

EA

D

56.8

71.0

40

50

99.4

113.6

70

80

197

131

164

230

262

20 40 60 80 100 120 140 160 - L/MIN

25 30 35

MOUNTINGSLOTS

64

317 CRS

108

DISCHARGE OUTLET1” ANSI 150 FLANGE

AIR INLET3/8” BSP(F)

AIR EXHAUST1/2” BSP(F)

SUCTIONINLET1” ANSI 150 FLANGE

230

115

20 20

205

9

222

394

432

105

435

www.blagdonpump.com

B 25Air Operated Diaphragm Pump Range

8 Bar1 (1 6 psi)

7 Bar(1 .5 psi

01 )

75 M /hr

(44 CFM)

358 M /hr

(34 CFM)

339 M /hr

(23 CFM)

319 M /hr

(11 CFM)

3

312 M /hr(7 CFM)

6 Bar8 i( 7 ps )

5 Bar(72. p i)5 s

4 Bar

(58 psi)

3 Bar(4 .5 psi3 )

2 Bar

(2 9 psi)

1 r R PRESSU E

Ba AI R(14. si)5 p

Note: The above performance curve has been determined under the

following conditions: flooded suction, pumping clean water through a

calibrated electronic flow meter with pulsation dampener and silencer fitted.

Material options suitable for a wide range of applicationsSimple construction, easy to maintainSelf priming, ideal for emptying containersPressures to 8.6 barFlow rates up to 180 litres/minuteBolted construction for greater integrityWeighted Valve Balls for high S.G. and viscous fluidsReliable, pneumatic air valve

TECHNICAL DATA;

METALLIC SERIES B2503ALUMINIUM, STAINLESS STEEL, CAST IRON

Shipping Weights:

Shipping Dimensions:

Maximum Delivery: 180 Itrs/min

Max. Working Pressure: 8.6 bar

Max. Solid Particle Size: 3 mm.

Air Inlet: 3/8” BSP(F)

Temperature Limits: Determined by Elastomers

Suction Lift (Dry): 6.1 m.

Suction Lift (Wet): 7.6 m.

Fluid Inlet/Outlet: 1" BSP(F)

Installation: Wall or surface mounted

Accessories Included: Exhaust air Silencer

Aluminium 16 kg.

Cast Iron/Aluminium 25 kg.

Stainless Steel/Aluminium 25 kg.

400 x 300 x 470 mm.

TYPICAL CODE = B25.03 AA. BB. BBS

Performance curve

B 25 Air Operated Diaphragm Pump Range

Metallic Series

18

MODEL - B2503 : StandardX2503 : ATEX approved

WETTED COMPONENTSA : ALUMINIUMS : 316L STAINLESS STEELC : CAST IRON

VALVE SEATSS : 316L STAINLESS STEEL

VALVE BALLST : PTFE E : EPDMN : NEOPRENE V : VITONB : BUNA-N S : STAINLESS STEELD : DELRIN

DIAPHRAGMSN : NEOPRENE V : VITONP : POLYESTER B : BUNA-NR : SANTROPRENE T : PTFEP : POLYURETHANE E : EPDMO : ONE-PIECE PTFE

NON-WETTED COMPONENTSA : ALUMINIUM

VALVE TYPEB : BALLW: WEIGHTED

SUCTION ORIENTATIONB : BOTTOM

30 FE

ET

HE

AD

ME

TR

ES

HE

AD

0 0

10

20

FLUID FLOWRATE

0

PS

I H

EA

D

60

40

50

70

80

90

42.6

28.4

14.2

113.6

99.4

71.0

56.8

85.2

PS

I H

EA

D

99

33

66

197

131

164

230

262

127.8 295

200 40 60 100 140 160 200 - L/MIN18012080

5 10 15 20 25 - UK GPM4030 35

7 Bar10 .5 s )

( 1 p i

6 Bar(87 psi)

4 Barp(58 si)

3 B ra(4 . psi)

3 5

2 Bar(29 psi)

1 AI PRESSURE

Bar R 14.5 si)(

p

www.blagdonpump.com

5 Bar72.5 ps )

(i

8 BAR(116 s )p i

8.6 Bar

i

(125 ps )

319 M /hr(11 CFM)

339 M /hr(23 CFM)

358 M /hr(34 CFM)

375 M /hr(44 CFM)

3100 M /hr(59 CFM)

312 M /hr(7 CFM)

358210

105

226

AIR INLET3/8” BSPPARALLEL

FLUIDOUTLET1” BSPPARALLEL

EXHAUSTSILENCER1/2” BSP

192

50

21

5 A

IR IN

LE

T

21

5 A

IR E

XH

AU

ST

32

9 C

RS

40

5

FLUIDINLET1” BSPPARALLEL

B 25

19

MODELB25: SERIES 00

WETTED COMPONENTST : PTFE4 : CONDUCTIVE PTFE

VALVE SEATST : PTFE

VALVE BALLST : PTFE

DIAPHRAGMST : PTFEX : PTFE/VITON (HIGH TEMP.)

NON-WETTED COMPONENTS4 : CONDUCTIVE PTFE5 : POLYETHYLENE (HDPE)

VALVE TYPEB : BALLW: WEIGHTED

SUCTION ORIENTATIONB : BOTTOM

TYPICAL CODE = B25.00.T5.BB.TTT-LF

Simple construction, easy to maintainAvailable in Virgin and conductive PTFEChemically inertFlanged end connectionsAtex approved – intrinsically safeReliable, proven pneumatic air valveStrong, robust design

60 281 188

63

298

137 1” BSP PARALLELFLUID OUTLET

1” BSP PARALLELFLUID INLET

AIR EXHAUST1/2” BSP

201

386

411

230GROUNDING LEADATTACHED TO BASE LEG.(ATEX CERTIFIED MODELS ONLY)

212AIR INLET

AIR INLET3/8” BSP

391

TECHNICAL DATA;

NON METALLIC SERIES B25 VIRGIN PTFE, CONDUCTIVE PTFE

Shipping Weights:

Shipping Dimensions:

Maximum Delivery: 136 ltrs/min

Max. Working Pressure: 7 Bar

(8 Bar Max. Air Inlet)

Max. Solid Particle Size: 3 mm.

Air Inlet: 3/8" BSP (F)

3/8" NPT (F)OTemperature Limits: 100 C

Suction Lift (Dry): 6.1 m

Suction Lift (Wet): 7.6 m

Inlet/Outlet: 1" BSP/ANSI

150 Flange

Installation: Wall or surface mounted

Accessories Included: Exhaust air Silencer

Virgin PTFE: 37 kg.

Conductive PTFE: 40 kg.

500 x 300 x 450 mm.

www.blagdonpump.com

Air Operated Diaphragm Pump Range

PTFE – Non Metallic Series

Note: The above performance curve has been determined under the

following conditions: flooded suction, pumping clean water through a

calibrated electronic flow meter with pulsation dampener and silencer fitted.

ME

TR

ES

HE

AD

99 FE

ET

HE

AD

3042.6

0

14.2

0

28.4

0

10

20

FLUID FLOWRATE

5 10 15 - UK GPM20

0

33

66

60

85.2

PS

I H

EA

D

56.8

71.0

40

50

99.4

113.6

70

80

197

131

164

230

262

20 40 60 80 100 120 140 160 - L/MIN

25 30 35

8 Bar1 (1 6 psi)

7 Bar(1 .5 psi

01 )

75 M /hr

(44 CFM)

358 M /hr

(34 CFM)

339 M /hr

(23 CFM)

319 M /hr

(11 CFM)

3

312 M /hr(7 CFM)

6 Bar8 i( 7 ps )

5 Bar(72. p i)5 s

4 Bar

(58 psi)

3 Bar(4 .5 psi3 )

2 Bar

(2 9 psi)

1 r R PRESSU E

Ba AI R(14. si)5 p

Performance curve

Robust construction, easy to maintainCan easily handle viscous, high S.G and high head applicationsSmooth action, less vibration and wearPressures to 16 barFlow rates up to 125 litres/minuteBolted construction for greater integrityReliable pneumatic air valveStalls against closed head without damage.Re-start on demand

Note: The above performance curve has been determined under the

following conditions: flooded suction, pumping clean water through a

calibrated electronic flow meter with pulsation dampener and silencer fitted.

TECHNICAL DATA;

METALLIC SERIES - FULL FLOW 2:1 B25

Shipping Weights:

Shipping Dimensions:

Maximum Delivery: 125 ltrs/min

Max. Working Pressure: 16 Bar (232 psi)

(8 Bar Max. Air Inlet)

Max. Solid Particle Size: 3 mm.

Air Inlet: 3/8" BSP (F)

Temperature Limits: Determined by Elastomers

Suction Lift (Dry): 6 m. (20')

Suction Lift (Wet): 7.6 m. (25')

Fluid Inlet/Outlet: 1" BSP (F)

Installation: Surface mounted

Accessories Included: Exhaust air Silencer

Stainless Steel/Aluminium 33 kg.

Aluminium 24.5 kg.

480 x 320 x 480 mm.

TYPICAL CODE = B25. 01. AA. W3. NNS

Performance curve

B 25 Air Operated Diaphragm Pump Range

Full Flow High Pressure

20 www.blagdonpump.com

MODEL - B25 : Standard X25 : ATEX approved

DESIGN LEVELVALVE SEATSS : 316 STAINLESS STEEL

VALVE BALLST : PTFEN : NEOPRENEB : BUNA-NE : EPDMS : STAINLESS STEELV : VITON

DIAPHRAGMST : PTFEN : NEOPRENEB : BUNA-NR : SANTOPRENEE : EPDMH : POLYESTER (HYTREL)O : ONE PIECE PTFEP : POLYURETHANEV : VITON

WETTED COMPONENTSA : ALUMINIUMS : 316 STAINLESS STEEL.

NON-WETTED COMPONENTSA : ALUMINIUM

VALVE TYPEB : BALLW: WEIGHTED

MODEL DESIGNATION

100

FLUID FLOW RATE

ME

TR

ES

HE

AD

60

40

20

40

80

20

4 8

40

60

12

80

16

180

160

140

120

100

80PS

I H

EA

D

120

160

200

240

200

100

- UK GPM2820

120

24

140

32

- L/MIN

600

500

400

300

FE

ET

HE

AD

0

254

405

464

438

72 105

250

50

330

280

MOUNTING HOLESØ 8.5 THRO’

DISCHARGE OUTLET1” BSP (F)

3/8” BSP (F)AIR INLET

AIR EXHAUST1/2” BSP(F)

202AIR INLET

SUCTION INLET1” BSP (F)

370 M /hr(41.2 CFM)

314 M /hr(8.2 CFM)

358 M /hr(34.2 CFM)

350 M /hr(29.4 CFM)

325 M /hr(14.7 CFM)

340 M /hr AIR CONSUMPTION(23.5 CFM)

1.5 Bar(21.7 ps )i

2 .0 Bar0(29. psi)

. a3 0 B r3 5 p i)

(4 . s

.0 Ba

4

r(58 p

)si

5 Ba.0

r(7 .5 psi2 )

6.0 Bar(87 psi)

7.0 Bar(10 . si)1 5 p

8

aA

RRES

RE

.0 Br I

P

SU

6i)

(11 ps

Range of DIN/RJT and Ferrule connectionsSelf priming for emptying containersFood grade elastomers-EPDM/PTFEPressures to 8.6 barCapable of handling high viscosity & S.GCertified CIP cleanableEU Design approval316L Stainless steel

Note: The above performance curve has been determined under the

following conditions: flooded suction, pumping clean water through a

calibrated electronic flow meter with pulsation dampener and silencer fitted.

TECHNICAL DATA;

HYGIENIC SERIES B25STAINLESS STEEL

Shipping Weights:

Shipping Dimensions:

Maximum Delivery: 136 Itrs/min

Max. Working Pressure: 8.6 bar

Max. Solid Particle Size: 5 mm.

Air Inlet: 3/8" BSP(F)

Temperature Limits: Determined by Elastomers

Suction Lift (Dry): 4.6 m.

Suction Lift (Wet): 6.1 m.

Fluid Inlet/Outlet: 1" RJT

Installation: Wall or surface mounted

Accessories Included: Exhaust air Silencer

Stainless Steel 21.5 kg.

450 x 280 x 500 mm.

TYPICAL CODE = B25. ZF. BB. EEE

Performance curve

B 25Air Operated Diaphragm Pump Range

Hygienic Series

21

MODEL - B25X25: ATEX approved

WETTED COMPONENTSZ : 316 STAINLESS STEEL (POLISHED)

VALVE SEATSE : FOOD GRADE EPDMS : 316 STAINLESS STEEL

VALVE BALLSE : FOOD GRADE EPDMT : PTFES : 316 STAINLESS STEEL

DIAPHRAGMSE : FOOD GRADE EPDMT : PTFE

NON-WETTED COMPONENTSS : 316 STAINLESS STEELF : NICKEL PLATED ALUMINIUM

VALVE TYPEB : BALL

SUCTION ORIENTATIONB : BOTTOM

FLUID FLOW RATE

10

20

30

40

50

60

70

80

ME

TR

ES

HE

AD

50

100

150

20

40

60

80

100

120

PS

I H

EA

D

FE

ET

HE

AD

200

250

85 279

20 40 60 80 100 120 140 160 L/MIN

4 168 12 20 24 - UK GPM28 32

160 126.5

SUNCTIONINLET1” MALE RJT

DISCHARGE OUTLET1” MALE RJT

AIR INLET3/8” BSP(F)

SILENCER1/2” BSP

223AIR INLET

160

220

55

432

226413

108187

356

4 MOUNTING HOLES Ø 9

www.blagdonpump.com

365 M /hr(38 CFM)

3.0 arB( 3 5 p i)4 . s

4.0 arB58 p )

( si

5.0 Bar(72.5 psi)

B6.0 ar(87 psi)

7 0 Ba. r0 5 p

(1 1. si)

320 M /hr(11.7 CFM)

340 M /hr(23.5 CFM)

330 M /hr AIR CONSUMPTION(17.6 CFM)

BarI

SU

8.0 A R PRE

SRE

16 si

(1p

)

.0 Bar2(29.0 psi)5 r

1. Ba. s )

(21 7 p i

Simple construction, easy to maintainSelf priming, ideal for emptying containersPressures to 8.6 barFlow rates up to 320 litres/minuteBolted construction for greater integrityReliable, proven pneumatic air valve system

Note: The above performance curve has been determined under the

following conditions: flooded suction, pumping clean water through a

calibrated electronic flow meter with pulsation dampener and silencer fitted.

The above drawing shows Aluminium and Cast Iron only.

TECHNICAL DATA;

METALLIC SERIES B40ALUMINIUM, CAST IRON & STAINLESS STEEL

Shipping Weights:

Shipping Dimensions:

Maximum Delivery: 320 Itrs/min

Max. Working Pressure: 8.6 bar

Max. Solid Particle Size: 6 mm.

Air Inlet: 3/8" BSP(F)

Temperature Limits: Determined by Elastomers

Suction Lift (Dry): 6.1 m.

Suction Lift (Wet): 7.6 m.

Fluid Inlet/Outlet: 1 1/2" BSP(F)

Installation: Surface mounted

Accessories Included: Exhaust air Silencer

Aluminium 22 kg.

Stainless Steel/Aluminium 36 kg.

Stainless Steel 46 kg.

Stainless Steel/Cast Iron 46 kg.

Cast Iron/Aluminium 51.4 kg.

Cast Iron 61 kg.

500 x 350 x 600 mm.

TYPICAL CODE = B40. 02. AA. BB. BBS

Performance curve

B 40 Air Operated Diaphragm Pump Range

Metallic Series

22

MODEL - B40 : Standard X40 : ATEX approved

DESIGN LEVELVALVE SEATSB : BUNA-N A : ALUMINIUME : EPDM N : NEOPRENEV : VITONS : 316 STAINLESS STEEL

VALVE BALLSB : BUNA-N T : PTFEE : EPDM V : VITONN : NEOPRENES : 316 STAINLESS STEEL

DIAPHRAGMSB : BUNA-N P : POLYURETHANEE : EPDM R : SANTOPRENEH : POLYESTER T : PTFEN : NEOPRENE V : VITONO : ONE PIECE PTFE

WETTED COMPONENTSA : ALUMINIUMC : CAST IRONS : 316 STAINLESS STEEL

NON-WETTED COMPONENTSA : ALUMINIUMC : CAST IRONS : 316 STAINLESS STEEL

VALVE TYPEB : BALLW: WEIGHTED

SUCTION ORIENTATIONB : BOTTOM

FLUID FLOW RATE

10

20

30

40

50

60

70

80

ME

TR

ES

HE

AD

50

100

150

20

40

60

80

100

120

PS

I H

EA

D

FE

ET

HE

AD

200

250

85 279

- L/MIN50 100 150 200 250 300 3500

0 10 3020 5040 8060 - UK GPM70

204

178

FLUID SUCTIONINLET 1”1/2 BSP

AIR INLET3/8” BSP

FLUID DISCHARGEOUTLET 1”1/2 BSP

SILENCER1/2” BSP(M)

271AIR INLET

270

441

243

117.5

549

486 IN-LINE MANIFOLD

470

4856

251

13 SLOT

www.blagdonpump.com

360 M /hr AIR CONSUMPTION(35.3 CFM)

320 M /hr(11.7 CFM)

390 M /hr(53 CFM)

3100 M /hr(58.8 CFM)

3115 M /hr(67.5 CFM)

380 M /hr(47 CFM)

RR

S

E

8.0Bar AI

PE

SUR

(1

si

16 p

)7.0 Ba r(1

.5si

01 p

)

6.0 Bar(87 psi)

5.0 Bar72.si

(5 p )4.0 Bar(58 psi)

3.0 Bar5

)(43. psi

2 0. Bar29 p i

( .0 s )B1.5 ar

21. i( 7 ps )

340 M /hr(23.5 CFM)

Simple construction, easy to maintainCapable of handling high S.G and viscous fluidsPressures to 8.6 barFlow rates up to 530 litres/minuteFlanged end connectionsReliable, proven pneumatic air valve

Note: The above performance curve has been determined under the

following conditions: flooded suction, pumping clean water through a

calibrated electronic flow meter with pulsation dampener and silencer fitted.

TECHNICAL DATA;

MOULDED NON METALLIC SERIES B50POLYPROPYLENE & PVDF

Shipping Weights:

Shipping Dimensions:

Maximum Delivery: 530 ltrs/min

Max. Working Pressure: 8.6 bar

Max. Solid Particle Size: 6 mm.

Air Inlet: 3/4" BSP(F)

Temperature Limits: Determined by Elastomers

Suction Lift (Dry): 6.1 m.

Suction Lift (Wet): 7.6 m.

Fluid Inlet/Outlet: 2" ANSI #150 RF Flanged

Installation: Surface mounted

Accessories Included: Exhaust Air Silencer

Polypropylene/Aluminium 39.5 kg.

Polypropylene/Stainless 50.5 kg.

PVDF/Aluminium 50.5 kg.

PVDF/Stainless 70 kg.

630 x 380 x 670 mm.

TYPICAL CODE = B50. 02. PT. BB. EEP

Performance curve

B 50Air Operated Diaphragm Pump Range

Moulded Non Metallic Series

23

MODEL - B50

DESIGN LEVEL VALVE SEATSB : BUNA-N T : PTFEE : EPDM V : VITONN : NEOPRENEP : POLYPROPYLENE

VALVE BALLSB : BUNA-N T : PTFEE : EPDM V : VITONN : NEOPRENES : 316 STAINLESS STEEL

DIAPHRAGMSB : BUNA-N T : PTFEE : EPDM V : VITONH : POLYESTER (HYTEL)N : NEOPRENEP : POLYURETHANER : SANTOPRENEO : ONE-PIECE PTFE

WETTED COMPONENTSP : POLYPROPYLENEK : KYNAR (PVDF)

NON-WETTED COMPONENTST : ALUMINIUM / EPOXY PAINTEDW: 316 STAINLESS STEEL / EPOXY

PAINTED

VALVE TYPEB : BALLW: WEIGHTED

SUCTION ORIENTATIONB : BOTTOM

FE

ET

HE

AD

PS

I H

EA

D

ME

TR

ES

HE

AD

FLUID FLOW RATE

0 20 40

20

40

60

0 50 100

10

20

200150 250

30

40

- UK GPM60 80 100

550 - L/Min

131

98

66

33

350300 400 500450

80

100

120

60

50

70

80 262

229

197

164

120

234

280

324

620

289AIR INLET

AIR INLET3/4” BSP(F)

DISCHARGE OUTLET2” ANSI 150 FLANGE

AIR EXHAUST3/4” BSP(F)

SUCTION INLET2” ANSI150 FLANGE

139

321

561

617

148

80

464

www.blagdonpump.com

340 M /hr AIR CONSUMPTION(23.5 CFM)

330 M /hr(17.5 CFM)

360 M /hr(35 CFM)

380 M /hr(47 CFM)

3100 M /hr(59 CFM)

3140 M /hr(82.5 CFM)

320 M /hr(12 CFM)

.0 Br

4 a(5

p i)8 s3 a.0 B r

4 .5 p )( 3 si

B1.5 ar1. i

(2 7 ps )

2 0. Bar29 p i

( .0 s )

8.0 Bar AIR PRESSURE

( 16 ps )

1

i

.0a

7 B

r(1.5

s

01 p

i)

6.0 Bar(87 psi)

.0 Ba5

r2. p)

(75

si

Air valve designed for in-line maintenanceEnd ported for improved flowPressures to 8.6 barFlow rates up to 530 litres/minuteBolted construction for greater integrityRobust construction

TECHNICAL DATA;

METALLIC SERIES B50ALUMINIUM & CAST IRON

Shipping Weights:

Shipping Dimensions:

Maximum Delivery: 530 Itrs/min

Max. Working Pressure: 8.6 bar

Max. Solid Particle Size: 6 mm.

Air Inlet: 3/4" BSP(F)

Temperature Limits: Determined by Elastomers

Suction Lift (Dry): 6.1 m.

Suction Lift (Wet): 7.6 m.

Fluid Inlet/Outlet: 2" BSP(F)

Installation: Surface mounted

Accessories Included: Exhaust air Silencer

Aluminium 38 kg.

Cast Iron/Aluminium 63 kg.

Cast Iron 90 kg.

540 x 350 x 750 mm.

TYPICAL CODE = B50. 02. AA. BB. BBB

Performance curve

B 50 Air Operated Diaphragm Pump Range

Metallic Series

24 www.blagdonpump.com

MODEL - B50 : Standard X50 : ATEX approved

DESIGN LEVELVALVE SEATSA : ALUMINIUMS : 316 STAINLESS STEELN : NEOPRENEB : BUNA-NE : EPDMT : PTFE

VALVE BALLSB : BUNA-NN : NEOPRENEE : EPDMV : VITONS : 316 STAINLESS STEELT : PTFE

DIAPHRAGMSB : BUNA-N V : VITONT : PTFE E : EPDMH : POLYESTERP : POLYURETHANEO : ONE PIECEN : NEOPRENER : SANTOPRENE

WETTED COMPONENTSA : ALUMINIUMC : CAST IRON

NON-WETTED COMPONENTSA : ALUMINIUMC : CAST IRON

VALVE TYPEB : BALLW: WEIGHTED

SUCTION ORIENTATIONB : BOTTOM

256 118.5

625578 CRS

1447

60

460

229 CRS20 SLOT DEPTH

SUCTION INLET2” BSP

AIR INLET3/4” BSP

340AIR INLET/EXHAUST

254

127

663

139

316

246.5

493 IN-LINE OPTIONDISCHARGE OUTLET2” BSP

Note: The above performance curve has been determined under the

following conditions: flooded suction, pumping clean water through a

calibrated electronic flow meter with pulsation dampener and silencer fitted.

FE

ET

HE

AD

PS

I H

EA

D

ME

TR

ES

HE

AD

FLUID FLOW RATE

0 20 40

20

40

60

0 50 100

10

20

200150 250

30

40

- UK GPM60 80 100

550 - L/Min

131

98

66

33

350300 400 500450

80

100

120

60

50

70

80 262

229

197

164

120

340 M /hr AIR CONSUMPTION(23.5 CFM)

330 M /hr(17.5 CFM)

360 M /hr(35 CFM)

380 M /hr(47 CFM)

3100 M /hr(59 CFM)

3140 M /hr(82.5 CFM)

320 M /hr(12 CFM)

.0 Br

4 a(5

p i)8 s3 a.0 B r

4 .5 p )( 3 si

B1.5 ar1. i

(2 7 ps )

2 0. Bar29 p i

( .0 s )

8.0 Bar AIR PRESSURE

( 16 ps )

1

i

.0a

7 B

r(1.5

s

01 p

i)

6.0 Bar(87 psi)

.0 Ba5

r2. p)

(75

si

Performance curve

Simple construction, easy to maintainSelf priming, ideal for emptying containersPressures to 8.6 barFlow rates up to 530 litres/minuteBolted construction for greater integrity316 Stainless Steel

TECHNICAL DATA;

METALLIC SERIES B50STAINLESS STEEL

Shipping Weights:

Shipping Dimensions:

Maximum Delivery: 530 Itrs/min

Max. Working Pressure: 8.6 bar

Max. Solid Particle Size: 6 mm.

Air Inlet: 3/4" BSP(F)

Temperature Limits: Determined by Elastomers

Suction Lift (Dry): 6.1 m.

Suction Lift (Wet): 7.6 m.

Fluid Inlet/Outlet: 2" BSP(F)

Installation: Surface mounted

Accessories Included: Exhaust air Silencer

Stainless Steel/Aluminium 70 kg.

Stainless Steel 95.5 kg.

Stainless Steel/Cast Iron 95.5 kg.

630 x 380 x 670 mm.

TYPICAL CODE = B50. 02. SA. BB. BBS

B 50Air Operated Diaphragm Pump Range

Metallic Series

25

MODEL - B50 : Standard X50 : ATEX approved

DESIGN LEVELVALVE SEATSA : ALUMINIUMS : 316 STAINLESS STEELN : NEOPRENEB : BUNA-NE : EPDMV : VITON

VALVE BALLSB : BUNA-NN : NEOPRENEE : EPDMT : PTFES : 316 STAINLESS STEELV : VITON

DIAPHRAGMSB : BUNA-NE : EPDMH : POLYESTERP : POLYURETHANET : PTFER : SANTOPRENEN : NEOPRENE

WETTED COMPONENTSS : 316 STAINLESS STEEL

NON-WETTED COMPONENTSA : ALUMINIUMC : CAST IRONS : 316 STAINLESS STEEL

VALVE TYPEB : BALLW: WEIGHTED

SUCTION ORIENTATIONB : BOTTOM

130

260

328

30

269AIR INLET

AIR INLET3/4” BSP(F)

FLUID OUTLET2” BSP(F)

FLUID INLET2” BSP(F)

169

381 110

64

579

590139

478

Ø8.7 HOLES THRO’ BASE LEG

www.blagdonpump.com

Note: The above performance curve has been determined under the

following conditions: flooded suction, pumping clean water through a

calibrated electronic flow meter with pulsation dampener and silencer fitted.

FE

ET

HE

AD

PS

I H

EA

D

ME

TR

ES

HE

AD

FLUID FLOW RATE

0 20 40

20

40

60

0 50 100

10

20

200150 250

30

40

- UK GPM60 80 100

550 - L/Min

131

98

66

33

350300 400 500450

80

100

120

60

50

70

80 262

229

197

164

120

340 M /hr AIR CONSUMPTION(23.5 CFM)

330 M /hr(17.5 CFM)

360 M /hr(35 CFM)

380 M /hr(47 CFM)

3100 M /hr(59 CFM)

3140 M /hr(82.5 CFM)

320 M /hr(12 CFM)

.0 Br

4 a(5

p i)8 s3 a.0 B r

4 .5 p )( 3 si

B1.5 ar1. i

(2 7 ps )

2 0. Bar29 p i

( .0 s )

8.0 Bar AIR PRESSURE

( 16 ps )

1

i

.0a

7 B

r(1.5

s

01 p

i)

6.0 Bar(87 psi)

.0 Ba5

r2. p)

(75

si

Robust construction, easy to maintainCan easily handle viscous, high S.G and high head applicationsSmooth action, less vibration and wearPressures to 16 barFlow rates up to 350 litres/minuteBolted construction for greater integrityReliable pneumatic air valveStalls against closed head without damage.Re-start on demand

Note: The above performance curve has been determined under the

following conditions: flooded suction, pumping clean water through a

calibrated electronic flow meter with pulsation dampener and silencer fitted.

The above drawing shows Stainless Steel only.

TECHNICAL DATA;

METALLIC SERIES-FULL FLOW 2:1 B50STAINLESS STEEL, ALUMINIUM

Shipping Weights:

Shipping Dimensions:

Maximum Delivery: 350 Itrs/min

Max. Working Pressure: 16 bar

Max. Solid Particle Size: 6 mm.

Air Inlet: 3/4" BSP(F)

Max Air Inlet: 8 bar

Temperature Limits: Determined by Elastomers

Suction Lift (Dry): 6.1 m.

Suction Lift (Wet): 7.6 m.

Fluid Inlet/Outlet: 2" BSP(F)

Installation: Surface mounted

Accessories Included: Exhaust air Silencer

Aluminium 52 kg.

Stainless Steel/Aluminium 78 kg.

850 x 450 x 800 mm.

TYPICAL CODE = B50. 02. SA. W3. BBS

Performance curve

B 50 Air Operated Diaphragm Pump Range

Full Flow High Pressure

26

MODEL - B50 : Standard X50 : ATEX approved

DESIGN LEVELVALVE SEATSS : 316 STAINLESS STEELA : ALUMINIUM

VALVE BALLSB : BUNA-NN : NEOPRENEE : EPDMV : VITONT : PTFES : 316 STAINLESS STEEL

DIAPHRAGMSB : BUNA-NN : NEOPRENEE : EPDMH : POLYESTERP : POYURETHANEV : VITONT : PTFER : SANTOPRENEO : ONE PIECE

WETTED COMPONENTSS : 316 STAINLESS STEELA : ALUMINIUM

NON-WETTED COMPONENTSA : ALUMINIUM

VALVE TYPEB : BALLW: WEIGHTED

MODEL DESIGNATION

FE

ET

HE

AD

ME

TR

ES

HE

AD

100 231

200 250 3000 50 100 150

20

40

60

80

350 - L/min

46

92

138

185

110

90

10

20

30

40

50

60

70

80

100

130

120

140

150

160

PS

I H

EA

D

120

140

160

180

200

220

277

323

369

416

462

508

FLUID FLOW RATE10 80 - UK GPM20 30 40 50 60 70

212

577

130260

320

67

280

595490

AIR INLET3/4” BSP(F)

FLUID INLET2” BSP(F)

FLUID OUTLET2” BSP(F)

SILENCER (FITTED)

3/4” BSP(M)

316729

139

4 HOLES THRO’ Ø8.5

www.blagdonpump.com

80Ba

AIR

ESSURE

.

r

PR

(16 p

)

1

si

a7.0 B

r.5 p i

(101 s )

B6.0

ar7(8

psi)

5.0 Bar72. ps )

(5 i

4.0ar

B(5 p i)

8s

3.0 Bar(43.5 psi)

B r1.5 a

1.(2 7 psi)

2.0 Ba r29. p )

( 0 si

330 M /hr(17.6 SCFM)

340 M /hr(23.5 CFM)

3180 M /hr(106 CFM)

3160 M /hr(94 CFM)

390 M /hr(53 CFM)

365 M /hr(38 CFM)

3135 M /hr AIR CONSUMPTION(79.5 CFM)

Range of DIN/RJT and Ferrule connectionsSelf priming for emptying containersFood grade elastomers-EPDM/PTFEPressures to 8.6 barCapable of handling high viscosity & S.GCertified CIP cleanableEU Design approval316 Stainless steel

oPump stand option for 180 rotation in place

Note: The above performance curve has been determined under the

following conditions: flooded suction, pumping clean water through a

calibrated electronic flow meter with pulsation dampener and silencer fitted.

TECHNICAL DATA;

HYGIENIC SERIES B50STAINLESS STEEL

Shipping Weights:

Shipping Dimensions:

Maximum Delivery: 500 Itrs/min

Max. Working Pressure: 8.6 bar

Max. Solid Particle Size: 6 mm.

Air Inlet: 3/4" BSP(F)

Temperature Limits: Determined by Elastomers

Suction Lift (Dry): 6.1 m.

Suction Lift (Wet): 7.6 m.

Fluid Inlet/Outlet: 2" RJT (Standard)

Installation: Surface mounted

Accessories Included: Exhaust air Silencer

Stainless Steel 64 kg.

660 x 430 x 880 mm.

TYPICAL CODE = B50. 01. ZF. BB. EEE

Performance curve

Hygienic Series

27

MODEL - B50 StandardX50: ATEX approved

DESIGN LEVELVALVE SEATSE : FOOD GRADE EPDMT : PTFE

VALVE BALLSE : FOOD GRADE EPDMT : PTFES : 316 STAINLESS STEEL

DIAPHRAGMSE : FOOD GRADE EPDMH : POLYESTER FOOD GRADEO : ONE PIECE PTFE

WETTED COMPONENTSZ : 316 STAINLESS STEEL (ELECTRO POLISHED)

NON-WETTED COMPONENTSS : 316 STAINLESS STEELF : NICKEL PLATED ALUMINIUM

VALVE TYPEB : BALL

SUCTION ORIENTATIONB : BOTTOM

198

689

540270

30572

SUCTION INLET2” RJT - STANDARD OTHER OPTIONS AVAILABLE

90

714

598

382AIR

EXHAUST

AIR EXHAUST

3/4” BSP

322225

Ø61 RUBBER MOUNTING PADS (M8 FIXING BOLTS)

AIR INLET3/4” BSP

DISCHARGE OUTLET - 2” RJT STANDARDOTHER OPTIONS AVAILABLE

382AIR INLET

www.blagdonpump.com

FE

ET

HE

AD

ME

TR

ES

HE

AD

FLUID FLOW RATE

PS

I H

EA

D

10

0

20

30

40

50

60

70

80

100

0

20

40

60

80

120

0

0

100 - UK GPM20

100 200 300 400 500 - L/MIN

0

33

66

99

131

164

197

230

262

40 60 80

a7.0 B

r

(100 psi)

a8.0 B

r(

)

116 psi

4 1 a. B r6 p( 0 si)

1 Ba SS RE

.4 r AIR PRE U2 ps( 0 i)

a2.7 B r0 i

(4 ps )

5.5 Bar80 p i)

(s

330 M /hr(17.6 CFM)

370 M /hr(41 CFM)

3110 M /hr(65 CFM)

3150 M /hr AIR CONSUMPTION(88 CFM)

B 50Air Operated Diaphragm Pump Range

Air valve will not stall in mid positionAir valve designed for in-line maintenanceEnd ported for improved flowPressures to 8.6 barFlow rates up to 889 litres/minuteBolted construction for greater integrityRobust construction

Note: The above performance curve has been determined under the

following conditions: flooded suction, pumping clean water through a

calibrated electronic flow meter with pulsation dampener and silencer fitted.

TECHNICAL DATA;

METALLIC SERIES X75

Shipping Weights:

Shipping Dimensions:

Maximum Delivery: 889 Itrs/min

Max. Working Pressure: 8.6 bar

Max. Solid Particle Size: 10 mm.

Air inlet: 3/4" BSP(F)

Temperature Limits: Determined by Elastomers

Suction Lift (Dry): 4.0 m.

Suction Lift (Wet): 5.0 m.

Fluid Inlet/Outlet: 3" BSP(F)

Installation: Surface mounted

Accessories Included: Exhaust air Silencer

Aluminium 53.5 kg.

Cast Iron/Aluminium 90 kg.

Stainless Steel/Aluminium 90 kg.

720 x 350 x 900 mm.

TYPICAL CODE = X75. 01. AA. BB. BBB

Performance curve

X75 Air Operated Diaphragm Pump Range

Metallic Series

28 www.blagdonpump.com

MODEL - X75 : ATEX approved

DESIGN LEVEL VALVE SEATSA : ALUMINIUMS : 316 STAINLESS STEELN : NEOPRENEB : BUNAE : EPDMV : VITONT : PTFE

VALVE BALLSB : BUNAN : NEOPRENEE : EPDMR : SANTOPRENET : PTFE

DIAPHRAGMSB : BUNAN : NEOPRENER : SANTOPRENEV : VITONT : PTFEE : EPDM

WETTED COMPONENTSA : ALUMINIUMC : CAST IRONS : 316 STAINLESS STEEL

NON-WETTED COMPONENTSA : ALUMINIUMC : CAST IRON

VALVE TYPEB : BALLW: WEIGHTED

SUCTION ORIENTATIONB : BOTTOM

BA

R

PS

I

HE

AD

20(34) 40(68)60(102)

80(136)

100(170)

100

80

60

40

20

00

1

2

3

4

5

6

7

120(204)

140(238)

0(6 8 B r)

1 0 PS . a

I

PS . 4 B

8 I (5 4 a

0

r)

6 P I( 4. 8 ar)

0 S 0 B

a0 P I (2 2

4 S .7 B r)

r ru

0 P (1 6 B leP e re

2 SI .3 a ) Ai In t r ss

30

20

25

10

15

5

9.1

6

7.6

3

4.5

1.5

NP

SH

R

ME

TE

RS

FE

ET

0

0

100

20

200

40

300

60

400

80 100 120 140 160 180 200 220 240

500 600 700 800 900

Liters per minute

CAPACITY

U.S. Gallons per minute

3CFM (M /hr)

422

129

60

200

257

3/4” BSPAIR INLET

1” NSPEXHAUST

149

701

298

761

16

815

327

435

577

184

305

367

62

10

SubmersibleDesigned for underground useHigh intensity spark freeRobust constructionModular construction, easy to maintainSpring loaded vanes for immediate start upPumps solid particles up to 8mmViton seal options for higher temperaturesIntegral baseplate/strainerAutomatic overspeed controlIntegral oil reservoir - automatic lubrication

Note: The above performance curve has been determined under the

following conditions: flooded suction, pumping clean water through a

calibrated electronic flow meter with pulsation dampener and silencer fitted.

TECHNICAL DATA;

SUBMERSIBLE CENTRIFUGAL PUMP

Shipping Weights:

Shipping Dimensions:

Maximum Delivery: 560 Itrs/min

Max. Working Pressure: 8.6 bar

Max. Solid Particle Size: 6 mm.

Air inlet: 3/4" BSP(F)

Temperature Limits: Determined by Seals

Suction Lift (Dry): N/A

Suction Lift (Wet): N/A

Fluid Inlet/Outlet: 2" BSPT(F)

Installation: N/A

Accessories Included: None

Cast Iron 33 kg.

500 x 380 x 260 mm

Industries

MiningConstructionDe-wateringSewageWell-pointing

Performance curve

AP50Air Operated Diaphragm Pump Range

29

10

20

30

40

FLUID FLOW RATE

ME

TR

ES

HE

AD

PS

I H

EA

D

FE

ET

HE

AD

50

162

458

41

11

147

FLUIDOUTLET2” BSPT(F)

AIREXHAUST1” BSP(F)AIR INLET

3/4” BSP(M)

Ø 197 RIBBEDPUMP INLET

Ø 406 (16”) MINIMUMBOREHOLE DIAMETER

www.blagdonpump.com

Submersible Centrifugal Pump

7 B r2. a(

40 psi).

a1 4 B

r AIR PRESSURE

(20 psi)

4

r.1 Ba

6( 0 psi)

5.5 Bar

(80 psi)

6.9 Bar(10

s )

0 pi

370 M /hr(41.2 CFM)

335 M /hr(20.6 CFM)

3100 M /hr AIR CONSUMPTION(58.9 CFM)

35

30

120

25

100

20

80

15

60

10

40

520

0 0

20

50 100 150 200 250 300 350 400 450 500 550 600 - L/MIN

40 60 80 100 120 130 - UK GPM

Bespoke Products

30 www.blagdonpump.com

1” Aluminium 4 Port Pump also available in Stainless Steel, Polypropylene and Kynar

1” Industrial Stainless Steel Pump c/w Steam Jacket

1” Stainless Steel 2:1 Pump c/w Custom Flange Design

2” Hygienic on Trolley c/w Stainless Steel Trolley

1” Hygienic Pump c/w Steam Jackets

1/2” Aluminium with Stroke Counter

1” Stainless Steel 2:1 Pump

1” Stainless with Steam Jacket

4 Port Pump 1/2” Aluminiumwith StrokeCounter

2” Hygienic on Trolley

1” Hygienic

Blagdon Accessories

31www.blagdonpump.com

Maintains constant oil density with varying flow Remote installation for ease of maintenanceEnsures clean, filtered airCan be controlled independently of other equipment

Batch ControlLinkage to control equipmentGreater process control10 - 30v DC, PNP normally open

Virtually pulsation free flowsSteadier pressuresLess vibration and noiseSimple installationVariety of sizes and materialsAutomaticallyself-charging

ANSI 150 as standard - also available:-- ANSI 300- PN16- Food Industry - RJT, DIN, TRI-CLAMPEase of connections to pipework systems

Pulsation Dampener

Valve Block with Sensors

Filter Regulators

Flanges

Oil Bottle Assembly

Exclusive to Blagdon PumpRobust heavy duty designSuitable for arduous installationsSafe for underground use - no aluminium

32 www.blagdonpump.com

® ® ®ARO , Wilden and Yamada AODD Pumps

Save upto 20% on OEM prices

Replacement parts that fit

® Wilden Pumps

Replacement parts that fit

® ARO Pumps

Replacement parts that fit

® Yamada Pumps

Pumper Parts – replacement parts that fit

Pumper Parts Europe and its products are not affiliated with any of the original

equipment manufacturers referenced herein. All original equipment manufacturers’

names, colours, pictures, descriptions and part numbers are used for identification

purposes only.

! Wilden is a registered trade name of Wilden Pump and Engineering Company, a

Dover Resources Company.

! Yamada is a registered trade name of Yamada Corporation.

! ARO os a registered trade name of Ingersoll-Rand Company.

! Teflon is a registered trade name of E.I. Dupont Company.

! Pumper Parts is a registered trade name of IDEX Corporation.

BLAGDON PUMP HOLDINGS LTD.,Lambert Road, Armstrong,Washington,Tyne & Wear, NE37 1QP,United Kingdom.

Tel: 0044 (0) 191 417 7475Fax: 0044 (0) 191 417 5435Email: [email protected]: www.blagdonpump.com

Quality & Service

Global supplier of quality pump replacement parts.

Individual parts and repair kits that fit ® ® ®ARO , Wilden and Yamada AODD

pumps.

Materials include synthetic rubbers, injected-molded thermoplastics and

®Teflon .

Our products are manufactured to meet or exceed the highest quality standards in the industry. All of our parts are engineered to perform equal to or better than the original equipment manufacturer (OEM). Parts guaranteed.

Worldwide distribution networkMost parts ship in 24 hoursFree product trials available

A UNIT OF IDEX CORPORATION

33

Notes

www.blagdonpump.com

Blagdon Website

34 www.blagdonpump.com

The Blagdon website operates on a 2 click policy. This means that wherever you are within the site it will never take more than two clicks to navigate to the information you require, whether that be technical data like a manual or datasheet, or a copy of the Company brochure.

The sites purpose is to have as much information as possible available to our Customers. Detailed opposite is a chart showing some of the most frequently asked questions and where the answers can be found.

Also shown within the web pages are:

Chemical Resistance Charts

Kit Revisions

Index with Components and Drawings

Viscosity Correction Curve

Flow Rate Conversion Calculator

Shipping Weights and Dimensions

Blagdon Numbering System

Products

Applications

Materials

About Our Pumps

About Blagdon Pump

Blagdon News

Distributors

Literature

Technical Details Troubleshooting Installation

A unit of

Contacts

Brochure

Brochure available online:

Brochure available to downloadTo view the brochure online go to – LITERATURETo order additional copies go to – OTHER ENQUIRIES

Quarterly Newsletter

Features include:

Engineering updatesNew Legislation issuesCurrent standards – Atex, EHEDG, ISO, IIPProject updatesProduct updatesFuture productsTechnical adviceTo view this online – go to BLAGDON NEWS

www.blagdonpump.com

Pakistan

Singapore

Thailand

UK

Indonesia

Latvia

Philippines

South Africa

Turkey

USA

Italy

Malaysia

Poland

Spain

UAE

Japan

Netherlands

Saudi Arabia

Sweden

Venezuela

India

Korea

Norway

35

GLOBAL NETWORK

At Blagdon we are committed to providing our Customers with an exceptional product.Along with our global network of Distributors, will endeavour at all times to provide unrivalled customer satisfaction.

To find your local Distributor click on DISTRIBUTOR from the home page.

Finding the pump you want couldn’t be easier...

Product Literature

Product specific literature is available which includes:

Technical dataPerformance curvesApplicable industries/applicationsAvailable optionsTo view this online go to – LITERATURETo order additional copies go to – OTHER ENQUIRIES

Worldwide Distribution

Australia Austria Belgium

Denmark

Germany

Eire

Hong Kong

Columbia

Finland

Hungary

Czech Republic

France

Chile ChinaCanada

How do I get a quotation?

Go to Contacts

I’d like to speak to a member of staff

Go to Contacts

I’d like to download some sales material

Go to Literature

I’d like to download some technical information

Go to Technical Details

Can the pump handle my process?

Go to Technical Details

What options do I have?

Go to Products

How does an air operated pump work?

Go to Blagdon Pump Tutorial

Why use an air operated pump?

Go to About Our Pumps

Other Enquiries Links

Home Sitemap Website FAQ's Website Feedback

BLAGDON PUMP(EUROPEAN PUMP GROUP)

Lambert Road, Armstrong, Washington, Tyne & Wear, NE37 1QP, UK.Tel : +44 (0)191 4177475 Fax : +44 (0)191 4175435

E-mail : [email protected] Web : www.blagdonpump.com

BLAGDON APG(ASIA PACIFIC)

IDEX Asia Pacific Pte. Ltd63, Hillview Ave. #7-08

Lam Soon Industrial BuildingSingapore 669-569Tel : +65 6314 6131Fax : +65 6764 4020

E-mail : [email protected] : www.blagdonpump.com

LOCAL DISTRIBUTOR

www.blagdonpump.com

BLAGDON LAPG(LATIN AMERICA)

Hegel 153-602 Colonia Polanco11560 Mexico D.F. MexicoTel : +52 (55) 5255 1357Fax : +52 (55) 5255 1356

E-mail : [email protected] : www.blagdonpump.com


Top Related