1.4F 012-Awww.ebro-usa.comsales@ebro-armaturen.com

09.2017

The double flanged design is suitable for high pressure loading and is excellently suited for use in heavy industry, shipbuilding and waterworks.

FEATURES

- Absolutely tight sealing with flow in either direction

- The valve body and disc are accurately machined which results in low operating torque and long service life and reliability

- Triple shaft bearings prevent shaft deflection and guarantee optimum guidance even after many years of operating service

- Can be disassembled, material-specific recycling possible

- Single flange mounting possible

- Can be installed in any desired position

- Maintenance-free

- Fully repairable valve

- Offshore

- Water and waste water technology

- Shipbuilding

- Seawater desalination

GENERAL APPLICATIONS

DOUBLE FLANGED BUTTERFLY VALVE F012-A DOUBLE FLANGED BUTTERFLY VALVE F012-A

TECHNICAL DATANominal diameter: 2 inch - 48 inch

Face-to-face: EN 558 Series 13ISO 5752 Series 13API 609 Table 2C

Flange accommodation: EN 1092 PN 6/10/16/25ASME Class 150/300AS 4087 PN 16/21

Flange Surface Design: EN 1092 Form A/B, ASME RF, FF

Top flange: EN ISO 5211

Marking: EN 19

Tightness check: EN 12266 (Leakage rate A)ISO 5208, Category 3

Temperature range: -40FC to +392°F (depending onpressure, medium and material)

Operating pressure: max. 350 psi

Vacuum: up to 1 mbar absolute

TORQUE Operating pressureDN

[mm]Size[in] 50 [psi] 100 [psi] 150 [psi] 200 [psi] 350 [psi]

20 ¾ 51 51 46 - -25 1 51 51 46 - -32 1¼ 51 51 46 - -40 1½ 81 81 73 61 -50 2 51 71 64 69 25665 2½ 71 92 137 137 34280 3 81 102 165 183 496

100 4 92 183 256 282 769125 5 153 224 412 450 1282150 6 366 458 714 954 1965200 8 600 773 1282 1526 2990250 10 1526 1831 1831 1831 5126300 12 2034 2441 2563 2746 8116350 14 3560 5492 5584 5340 11961400 16 4272 6306 6865 6484 17514450 18 7323 7587 7872 11442 27339500 20 9154 11188 20642 28148 46989600 24 10679 21359 27461 44472 68348700 28 15866 22783 31580 61788 111065800 32 21054 38649 60414 85435 170869900 36 27461 49837 64991 110607 256304

1000 40 46786 68958 105268 186125 3759121200 48 79332 122049 192228 335636 512608

All values in Inch Lbs

- The torque values specified (Md) are based on liquid and lubricant media

- Powdery (non-lubricant) media Md x 1,3

- Dry gases/high viscous media Md x 1,2

- The values specified are based on the initial breakaway torque

- Dynamic torque specification available upon request

Regarding the dimensioning of actuators, please contact our engineers.

Cv-VALUES Opening angle α°DN

[mm]Size[in] 20° 30° 40° 50° 60° 70° 80° 90°

20 ¾ - 3 5 8 10,3 13 16 1925 1 - 3 6 10 16 22 30 4032 1¼ 1 3 8 15 25 36 49 6240 1½ 1 2 6 13 22 34 48 6550 2 1 7 15 27 41 56 73 8965 2½ 3 7 24 50 85 126 173 22380 3 8 23 58 110 175 250 331 416100 4 15 29 71 141 241 371 534 729125 5 43 76 142 251 411 632 922 1292150 6 58 109 199 352 592 942 1426 2067200 8 74 177 371 682 1137 1762 2581 3622250 10 205 338 653 1187 1975 3053 4456 6218300 12 239 475 972 1771 2915 4446 6403 8831350 14 371 687 1303 2323 3845 5972 8805 12445400 16 536 1005 2007 3624 5937 9026 12974 17860450 18 664 1245 2488 4491 7357 11186 16078 22134500 20 827 1551 3097 5592 9160 13927 20018 27558600 24 880 1650 3295 5949 9745 14817 21297 29319700 28 932 1523 4448 8787 14393 21883 31454 43302800 32 1209 1975 5074 11019 19519 30521 43971 59815900 36 1355 2214 6466 14044 24878 48419 69755 948901000 40 1686 2756 8049 17480 30965 53606 77228 1050561200 48 2465 4035 11779 25581 45337 70872 102110 138907

Subject to change without notice

- The Cv Value [US Gallon per minute] is the flow of water at a temperature of 41°F to 86°F with a pressure drop of 1 psi.

- The throttle function is linear at an angle 30° to 70°

- Avoid cavitation

For further values, please contact our engineers.

Ø FGØ F

□G

E2E1

H 1

C

E3

AB

H 2

Ø D

Ø Di

13 13

12 12

16

15

1614

3

7

1

2

4

5

6

17

18

19

20

11

10

9

8

11

11

F012-K1_2010.indd 1 23.07.2010 12:12:48

DOUBLE FLANGED BUTTERFLY VALVE F012-A

Optional shaft end:Double flat acc.toEN ISO 5211

F 012-A with bare shaft end acc. to EN ISO 5211

MATERIAL SPECIFICATION AND PARTS LIST

Pts. 17-20:Cover plate forvalve ≥ 14 inch

Subject to change without notice* according to the mounted actuator

TS-Version Version with splitted shaft

Pt. Description Material Material-No. ASTM Pt. Description Material Material-No. ASTM1 Body 9/10 Shafts

Nodular Cast Iron GGG-40 0.7040 60-40-18 Stainless Steel X14CrMoS17 1.4104 430 FCarbon Steel GS-C25 1.0619 WCB X5CrNiMo17-12-2 1.4401 316

2 Seat Hastelloy 2.4883 HastelloyNBR Acrylonitrile butadiene rubber Bronze CuAlNiBZ 2.0975EPDM Ethylene propylene caoutchouc 11 O-ringCSM Chlorsulphonated polyethylene NBR Acrylonitrile butadiene rubberFPM Flourocarbon caoutchouc FPM Fluorocarbon caoutchoucVSI Silicon rubber 12 TS-disc

3/4 Bearing bush Nodular Cast Iron GGG-40 0.7040 60-40-18Bronze RG 5 Stainless Steel G-X6CrNiMo10-20 1.4408 CF8MPolyamide Aluminium Bronze CuAl10Ni 2.0975 C 95800PTFE Coating Halar, Rilsan

5 Seal DIN 7603 Surface quality electropolished, mirror finishedCopper Cu Copper 13 TS-shaft

6 Plug screw DIN 908 Stainless Steel X14CrMoS17 1.4104 430 FStainless Steel 11SMnPb30 1.0718 galv. SAE12L14 X39CrMo17-1 1.4122Stainless Steel G-X5CrNiMo19-11-2 1.4408 CF8M X5CrNiMo17-12-2 1.4401 316

7 Threaded pin DIN 915 Bronze CuAlNiBZ 2.0975Steel 45 H galvanized 14 SleeveStainless Steel X5CrNiMo17-12-2 1.4401 B8M Stainless Steel X5CrNi18-10 1.4301 304

8 Disc 15 Taper pinSteel St52.3 1.0570 572-50 Stainless Steel X6CrNiMoTi17-12-2 1.4571Stainless Steel X5CrNi18-10 1.4301 304 16 Hex. nut

G-X5CrNiMo19-11-2 1.4408 CF8M Stainless Steel A2X2CrNiMo17-12-2 1.4404 316 L 17 O-ringX6CrNiMoTi17-12-2 1.4571 316 Ti NBR Acrylonitrile butadiene rubberX2CrNiMo22-5-3 1.4462 F 51 18 Shaft retentionHastelloy 2.4883 Hastelloy Bronze RG 5

Aluminium Bronze CuAl10Ni 2.0975 C 95800 19 Cover plateCoating Halar, Rilsan Grey Cast Iron GG-25 0.6025 40 BSurface quality electropolished, mirror finished 20 Screw

Steel 45 H galvanizedStainless Steel X5CrNiMo17-12-2 B8M

Other materials upon requestSubject to change without notice

DOUBLE FLANGED BUTTERFLY VALVE F012-A

Dimensions [in] Weight [lb](GGG-40)

DN[mm]

Size[in] A B C Di D E1 E2 E3 F Flange G H1 H2 Splitted

shaftTS-

shaft50 2 4.96 3.31 8.27 1.91 6.50 0.59 4.02 4.25 2.13 F04 0.43 0.47 0.75 20.50 -65 2½ 5.28 3.66 8.94 2.50 7.28 0.59 4.17 4.41 2.13 F04 0.43 0.47 0.75 22.30 -80 3 6.18 4.09 10.28 3.09 7.87 0.67 4.25 4.49 2.56 F05 0.55 0.63 0.98 26.90 28.00100 4 6.57 4.53 11.10 3.88 9.02 0.67 4.76 5.00 2.56 F05 0.55 0.63 0.98 35.50 36.80125 5 7.09 5.00 12.09 4.86 10.00 0.75 5.28 5.51 2.56 F05 0.55 0.63 0.98 52.90 54.20150 6 7.99 5.91 13.90 5.83 11.22 0.75 5.28 5.51 3.54 F07 0.67 0.75 1.18 63.90 67.20200 8 8.98 6.93 15.91 7.83 13.50 0.83 5.75 5.98 3.54 F07 0.67 0.75 1.18 86.20 90.20250 10 10.47 8.35 18.82 9.76 15.98 0.91 6.26 6.50 4.92 F10 0.87 0.94 1.54 134.90 141.50300 12 11.46 9.33 20.79 11.65 19.02 0.94 6.69 7.01 4.92 F10 0.87 0.94 1.54 179.50 185.60350 14 13.07 10.59 23.66 13.31 20.98 0.94 7.17 7.48 5.91 F12 * * - 235.90 248.20400 16 14.29 12.36 26.65 15.28 23.50 1.10 8.19 8.50 5.91 F12 * * - 313.10 325.80450 18 15.63 13.19 28.82 16.95 25.20 1.30 8.43 8.74 6.89 F14 * * - 403.40 414.50500 20 17.20 15.94 33.15 19.47 27.95 1.57 8.78 9.02 8.27 F14/16 * * - 513.70 529.10550 22 17.95 17.13 35.08 21.26 29.53 1.57 8.62 9.02 8.27 F16 * * - 590.80 628.30600 24 19.76 18.31 38.07 23.23 33.07 1.57 10.12 10.51 11.81 F16/25 * * - 668.00 727.50700 28 22.87 19.96 42.83 26.77 36.22 1.61 11.26 11.50 11.81 F16/25 * * - 897.30 1014.10800 32 24.80 21.89 46.69 30.71 41.34 1.85 12.28 12.52 11.81 F25 * * - 1331.60 1375.70900 36 27.40 24.29 51.69 34.65 46.38 1.85 12.60 12.99 11.81 F25 * * - 1642.40 1735.001000 40 30.35 26.57 56.93 38.58 50.39 1.85 15.91 16.14 13.78 F30 * * - 2076.70 2403.001200 48 35.63 31.89 67.52 46.06 59.45 2.17 18.11 18.50 13.78 F30 * * - -- 3086.40

Ø FGØ F

□G

E2E1

H 1

C

E3

AB

H 2

Ø D

Ø Di

13 13

12 12

16

15

1614

3

7

1

2

4

5

6

17

18

19

20

11

10

9

8

11

11

F012-K1_2010.indd 1 23.07.2010 12:12:48

DOUBLE FLANGED BUTTERFLY VALVE F012-A

Optional shaft end:Double flat acc.toEN ISO 5211

F 012-A with bare shaft end acc. to EN ISO 5211

MATERIAL SPECIFICATION AND PARTS LIST

Pts. 17-20:Cover plate forvalve ≥ 14 inch

Subject to change without notice* according to the mounted actuator

TS-Version Version with splitted shaft

Pt. Description Material Material-No. ASTM Pt. Description Material Material-No. ASTM1 Body 9/10 Shafts

Nodular Cast Iron GGG-40 0.7040 60-40-18 Stainless Steel X14CrMoS17 1.4104 430 FCarbon Steel GS-C25 1.0619 WCB X5CrNiMo17-12-2 1.4401 316

2 Seat Hastelloy 2.4883 HastelloyNBR Acrylonitrile butadiene rubber Bronze CuAlNiBZ 2.0975EPDM Ethylene propylene caoutchouc 11 O-ringCSM Chlorsulphonated polyethylene NBR Acrylonitrile butadiene rubberFPM Flourocarbon caoutchouc FPM Fluorocarbon caoutchoucVSI Silicon rubber 12 TS-disc

3/4 Bearing bush Nodular Cast Iron GGG-40 0.7040 60-40-18Bronze RG 5 Stainless Steel G-X6CrNiMo10-20 1.4408 CF8MPolyamide Aluminium Bronze CuAl10Ni 2.0975 C 95800PTFE Coating Halar, Rilsan

5 Seal DIN 7603 Surface quality electropolished, mirror finishedCopper Cu Copper 13 TS-shaft

6 Plug screw DIN 908 Stainless Steel X14CrMoS17 1.4104 430 FStainless Steel 11SMnPb30 1.0718 galv. SAE12L14 X39CrMo17-1 1.4122Stainless Steel G-X5CrNiMo19-11-2 1.4408 CF8M X5CrNiMo17-12-2 1.4401 316

7 Threaded pin DIN 915 Bronze CuAlNiBZ 2.0975Steel 45 H galvanized 14 SleeveStainless Steel X5CrNiMo17-12-2 1.4401 B8M Stainless Steel X5CrNi18-10 1.4301 304

8 Disc 15 Taper pinSteel St52.3 1.0570 572-50 Stainless Steel X6CrNiMoTi17-12-2 1.4571Stainless Steel X5CrNi18-10 1.4301 304 16 Hex. nut

G-X5CrNiMo19-11-2 1.4408 CF8M Stainless Steel A2X2CrNiMo17-12-2 1.4404 316 L 17 O-ringX6CrNiMoTi17-12-2 1.4571 316 Ti NBR Acrylonitrile butadiene rubberX2CrNiMo22-5-3 1.4462 F 51 18 Shaft retentionHastelloy 2.4883 Hastelloy Bronze RG 5

Aluminium Bronze CuAl10Ni 2.0975 C 95800 19 Cover plateCoating Halar, Rilsan Grey Cast Iron GG-25 0.6025 40 BSurface quality electropolished, mirror finished 20 Screw

Steel 45 H galvanizedStainless Steel X5CrNiMo17-12-2 B8M

Other materials upon requestSubject to change without notice

DOUBLE FLANGED BUTTERFLY VALVE F012-A

Dimensions [in] Weight [lb](GGG-40)

DN[mm]

Size[in] A B C Di D E1 E2 E3 F Flange G H1 H2 Splitted

shaftTS-

shaft50 2 4.96 3.31 8.27 1.91 6.50 0.59 4.02 4.25 2.13 F04 0.43 0.47 0.75 20.50 -65 2½ 5.28 3.66 8.94 2.50 7.28 0.59 4.17 4.41 2.13 F04 0.43 0.47 0.75 22.30 -80 3 6.18 4.09 10.28 3.09 7.87 0.67 4.25 4.49 2.56 F05 0.55 0.63 0.98 26.90 28.00100 4 6.57 4.53 11.10 3.88 9.02 0.67 4.76 5.00 2.56 F05 0.55 0.63 0.98 35.50 36.80125 5 7.09 5.00 12.09 4.86 10.00 0.75 5.28 5.51 2.56 F05 0.55 0.63 0.98 52.90 54.20150 6 7.99 5.91 13.90 5.83 11.22 0.75 5.28 5.51 3.54 F07 0.67 0.75 1.18 63.90 67.20200 8 8.98 6.93 15.91 7.83 13.50 0.83 5.75 5.98 3.54 F07 0.67 0.75 1.18 86.20 90.20250 10 10.47 8.35 18.82 9.76 15.98 0.91 6.26 6.50 4.92 F10 0.87 0.94 1.54 134.90 141.50300 12 11.46 9.33 20.79 11.65 19.02 0.94 6.69 7.01 4.92 F10 0.87 0.94 1.54 179.50 185.60350 14 13.07 10.59 23.66 13.31 20.98 0.94 7.17 7.48 5.91 F12 * * - 235.90 248.20400 16 14.29 12.36 26.65 15.28 23.50 1.10 8.19 8.50 5.91 F12 * * - 313.10 325.80450 18 15.63 13.19 28.82 16.95 25.20 1.30 8.43 8.74 6.89 F14 * * - 403.40 414.50500 20 17.20 15.94 33.15 19.47 27.95 1.57 8.78 9.02 8.27 F14/16 * * - 513.70 529.10550 22 17.95 17.13 35.08 21.26 29.53 1.57 8.62 9.02 8.27 F16 * * - 590.80 628.30600 24 19.76 18.31 38.07 23.23 33.07 1.57 10.12 10.51 11.81 F16/25 * * - 668.00 727.50700 28 22.87 19.96 42.83 26.77 36.22 1.61 11.26 11.50 11.81 F16/25 * * - 897.30 1014.10800 32 24.80 21.89 46.69 30.71 41.34 1.85 12.28 12.52 11.81 F25 * * - 1331.60 1375.70900 36 27.40 24.29 51.69 34.65 46.38 1.85 12.60 12.99 11.81 F25 * * - 1642.40 1735.001000 40 30.35 26.57 56.93 38.58 50.39 1.85 15.91 16.14 13.78 F30 * * - 2076.70 2403.001200 48 35.63 31.89 67.52 46.06 59.45 2.17 18.11 18.50 13.78 F30 * * - -- 3086.40

1.4F 012-Awww.ebro-usa.comsales@ebro-armaturen.com

09.2017

The double flanged design is suitable for high pressure loading and is excellently suited for use in heavy industry, shipbuilding and waterworks.

FEATURES

- Absolutely tight sealing with flow in either direction

- The valve body and disc are accurately machined which results in low operating torque and long service life and reliability

- Triple shaft bearings prevent shaft deflection and guarantee optimum guidance even after many years of operating service

- Can be disassembled, material-specific recycling possible

- Single flange mounting possible

- Can be installed in any desired position

- Maintenance-free

- Fully repairable valve

- Offshore

- Water and waste water technology

- Shipbuilding

- Seawater desalination

GENERAL APPLICATIONS

DOUBLE FLANGED BUTTERFLY VALVE F012-A DOUBLE FLANGED BUTTERFLY VALVE F012-A

TECHNICAL DATANominal diameter: 2 inch - 48 inch

Face-to-face: EN 558 Series 13ISO 5752 Series 13API 609 Table 2C

Flange accommodation: EN 1092 PN 6/10/16/25ASME Class 150/300AS 4087 PN 16/21

Flange Surface Design: EN 1092 Form A/B, ASME RF, FF

Top flange: EN ISO 5211

Marking: EN 19

Tightness check: EN 12266 (Leakage rate A)ISO 5208, Category 3

Temperature range: -40FC to +392°F (depending onpressure, medium and material)

Operating pressure: max. 350 psi

Vacuum: up to 1 mbar absolute

TORQUE Operating pressureDN

[mm]Size[in] 50 [psi] 100 [psi] 150 [psi] 200 [psi] 350 [psi]

20 ¾ 51 51 46 - -25 1 51 51 46 - -32 1¼ 51 51 46 - -40 1½ 81 81 73 61 -50 2 51 71 64 69 25665 2½ 71 92 137 137 34280 3 81 102 165 183 496100 4 92 183 256 282 769125 5 153 224 412 450 1282150 6 366 458 714 954 1965200 8 600 773 1282 1526 2990250 10 1526 1831 1831 1831 5126300 12 2034 2441 2563 2746 8116350 14 3560 5492 5584 5340 11961400 16 4272 6306 6865 6484 17514450 18 7323 7587 7872 11442 27339500 20 9154 11188 20642 28148 46989600 24 10679 21359 27461 44472 68348700 28 15866 22783 31580 61788 111065800 32 21054 38649 60414 85435 170869900 36 27461 49837 64991 110607 2563041000 40 46786 68958 105268 186125 3759121200 48 79332 122049 192228 335636 512608

All values in Inch Lbs

- The torque values specified (Md) are based on liquid and lubricant media

- Powdery (non-lubricant) media Md x 1,3

- Dry gases/high viscous media Md x 1,2

- The values specified are based on the initial breakaway torque

- Dynamic torque specification available upon request

Regarding the dimensioning of actuators, please contact our engineers.

Cv-VALUES Opening angle α°DN

[mm]Size[in] 20° 30° 40° 50° 60° 70° 80° 90°

20 ¾ - 3 5 8 10,3 13 16 1925 1 - 3 6 10 16 22 30 4032 1¼ 1 3 8 15 25 36 49 6240 1½ 1 2 6 13 22 34 48 6550 2 1 7 15 27 41 56 73 8965 2½ 3 7 24 50 85 126 173 22380 3 8 23 58 110 175 250 331 416100 4 15 29 71 141 241 371 534 729125 5 43 76 142 251 411 632 922 1292150 6 58 109 199 352 592 942 1426 2067200 8 74 177 371 682 1137 1762 2581 3622250 10 205 338 653 1187 1975 3053 4456 6218300 12 239 475 972 1771 2915 4446 6403 8831350 14 371 687 1303 2323 3845 5972 8805 12445400 16 536 1005 2007 3624 5937 9026 12974 17860450 18 664 1245 2488 4491 7357 11186 16078 22134500 20 827 1551 3097 5592 9160 13927 20018 27558600 24 880 1650 3295 5949 9745 14817 21297 29319700 28 932 1523 4448 8787 14393 21883 31454 43302800 32 1209 1975 5074 11019 19519 30521 43971 59815900 36 1355 2214 6466 14044 24878 48419 69755 948901000 40 1686 2756 8049 17480 30965 53606 77228 1050561200 48 2465 4035 11779 25581 45337 70872 102110 138907

Subject to change without notice

- The Cv Value [US Gallon per minute] is the flow of water at a temperature of 41°F to 86°F with a pressure drop of 1 psi.

- The throttle function is linear at an angle 30° to 70°

- Avoid cavitation

For further values, please contact our engineers.