diy earrings ideas-how to diy bead earrings in limited time
DESCRIPTION
Using two large focal beads and three small ones work as paving elements, learn to diy bead earrings in very limited time. Thus, for the novices, I recommend the diy earrings ideas.TRANSCRIPT
Diy earrings ideas-how to diy bead earrings in limited time
Wonder to figure out some diy earrings ideas that are
relatively easy to make? You may be willing to try
this one. This pair of earrings simply utilizes the basic
wire wrap techniques as well as common supplies
and tools. Follow the ensuing step-by-step
instructions to make these diy bead earrings.
Drop Transparent Acrylic Bead
Abacus Glass Bead (10mm & 6mm)
6mm Bicone Glass Bead
Snowflake Bead Spacer
Tibetan Bead Cap
Eyepin
Headpin
Earring Hook
Side Cutting Plier
Flat Nose Plier
Round Nose Plier
Details for diy earrings ideas:
Step1: Compose drop bead part
Using two large focal beads and three small ones work as paving elements, learn to diy bead earrings in
very limited time. Thus, for the novices, I recommend the diy earrings ideas.
Hold a long head pin, slide one bead cap, one
drop bead and one 6mm abacus glass bead
onto it in sequence. Form a 90 degree close to
the top bead with fingers;
Form a simple loop with the leftover pin tail.
Supplies needed in diy bead earrings:
Step2: create the 10mm abacus bead part
Step3: assemble your earrings
Do repeat all above processes for an entire pair of diy bead earrings.
See? It is both easy to get started the diy earrings
ideas and put a termination to it. For all seasons
though, I’d love to create a bunch of these diy
bead earrings for my own and all friends around. A
super easy tutorial costs less than 5 dollars, you
really deserve it!
Beside the beads, you can also buy many jewelry&gift in our website:
http://www.pandahall.com/wholesale-Jewelry-Gift/6.html
Take a long eyepin, and then thread the 6mm
Bicone glass bead, snowflake bead spacer, 10mm
Abacus glass bead alternately as picture show.
Loop the tail part in same way. Besides,
wrap other excess part around the pin
neck.
Open the loop at top of drop bead part and then
hook the part prepared in step2;
Attach on the earring hooks;