diy craft idea-how to make hemp bracelet designs
DESCRIPTION
This diy craft idea will explain the fundamental concepts relate to how to make hemp bracelet designs, include the materials and knotting techniques used. Besides bracelet, you can make necklace, belt or anything you feel like out of hemp twine.TRANSCRIPT
DIY craft idea-how to make hemp bracelet designs
Also as well-known as the famous macrame,
making a piece of hemp bracelet consists of tying
basic knots over and over again to create certain
pattern. As to this DIY craft idea, it is really a good
chance for beginners to learn some primary how
to make hemp bracelet designs, and at meanwhile
help the experienced hemp crafter to improve
their skills and designs. The following are the
details.
Supplies you’ll in the DIY craft idea:
Hemp cord
Tibetan style bead
Scissors
Lighter
How to make hemp bracelet designs?
Step1: cut the hemp
1. Cut two hemp strips, one about 100cm long and another about 40cm;
2. Fold your hemp twines in half. Tie an overhand knot at 2 or 3cm long from the folded locations;
3. Arrange your ends. Make the two short strands on the inside as main holding ends and the
longer ones on outside as working ends;
Step2: work the bracelet pattern
This DIY craft idea will explain the fundamental concepts relate to how to make hemp bracelet designs,
include the materials and knotting techniques used. Besides bracelet, you can make necklace, belt or
anything you feel like out of hemp twine.
1. Grab the two working ends and start to make
patterns consist of square knots;
2. After working 5 square knots, slide one
Tibetan style bead of your choice onto central
holding ends;
3. Repeat the square knots over and over
again;
4. In the center of your bracelet, hang on
one pendant. To the rest part, make a mirror
pattern;
Step3: cease the hemp bracelet
Tie an overhand knot at end. Trim off excess hemp and secure with drops of craft glue.
While learning and practicing how to make hemp
bracelet designs, rub a few beeswax along with your
hemp twine before starting. It helps keep the knots
on your bracelet be tight and avoid the bracelet from
getting soiled. Furthermore, besides tie a knot as
ending, you can try the bigger beads which would
pass the reserved loop at beginning. Just enjoy this
DIY craft idea!
Beside the hemp cord, many other styles of thread and cord can be found in our webpage:
http://www.pandahall.com/wholesale-Thread-Cord/54.html