diy bangles tutorials how to make bangle bracelets out of string and beads
TRANSCRIPT
Diy bangles tutorials-how to make bangle
bracelets out of string and beads
This is a Diy bangles tutorial; the contents including detailed illustrations and elaborate directions on how to
make bangle bracelets out of common Nylon Thread and Colorful Acrylic Beads. During whole project, you
merely need to tie the simple Square Knot to anchor your beads.
How to make bangle bracelets similar to the
famous Friendship bracelet? Honestly, it is truly an
idiotic question. Just taking your threads and
beads, and you will be able to make one for
yourself within half an hour. To start with the diy
bangles tutorials, you should firstly choose the
proper color threads and beads for your friend or
the gift receiver. After that, your bangle can be
finished in a short time. The cost is low and skill is
practically effortless. Just keep reading and the
tutorial will start here.
Materials you’ll need:
8mm Acrylic Beads-Colorful
1mm Nylon Thread
Hook and S-Hook Clasp
Scissors
Lighter
How to make bangle bracelets?
Step1: attach the threads onto clasp
Prepare two strands 1mm
Nylon Thread of each color, one
about 80cm for the working
ends and one 40cm for central
holding ends. In the diy
bangles, you may need totally
10 strings like that;
Next, pass the two same color strands through one hole on your clasp by utilizing section of
remaining Tiger tail wire;
Pull the threads and fix them by tying one square knot. Keep the thread tips stay symmetrical. Do
same for the next four colors.
The diy bangles is sort of base for really fun and amazing string bracelets, you can create many
different types items as selecting various colors and beads. By means of this method, you are not
only obtaining a new piece of wearable art, but an actually convenient way to plump your wrist. For
more plans on how to make bangle bracelets by strings and beads, just stay tuned! Nice day to all!
Getting more inspiration projects about string bracelet and friendship bracelets, please visit:
http://www.pandahall.com/learning-center.html
Step2: add on beads
Each time once finished a complete Square
Knot thread one 8mm Acrylic Bead onto the
holding ends. One strand may require 15
groups of the knot and bead.
In accordance to the above processes, finish
the rest four strands.
Please just freely arrange and assemble the
beads with threads depending on your
preference.
Step3: conclude the whole diy
bangles
Bring the holding ends through the holes on
other portion of the clasp as what we done at
beginning. Tie a fasten knot to anchor the
threads.
Finally, trim all excess threads and lightly
melt the ending parts with lighter.