Description & Drawings for Kitchen Equipments

Name of Work : Construction, Supplying, fixing and commissioning of Kitchen

Equipments(including Civil & Electrical works) at Scholars Hostel, NIIST, Trivandrum

Sl.

No.

Item Specification Quantity

1 Stainless steel-Steam Generator with one idly

steamer plus 3 vessels

Steam generator-30Kg

capacity, 30” to 32” outer

dia, Stainless steel material

with outer jacket of 6mm and

inner vessel 2mm with all

accessories like pressure

gauge, Float Valve, water

level indicator, safety valve,

drain valve, MS 25mm

square rod stand with

chimney-LPG operated in not

less than 42Kgs/min.

including SS stand

1 Each

SS Vessels50 Ltrs. Capacity,

double jacket vessels, 1.6mm

thick side wall and 2.0mm

thick bottom SS plate with lid

and tilting arrangements with

all accessories, SS Stand

3 Each

Idly/Iddiappam unit120 per

cycle, Heat resistance door

with accessories

1 Each

2 Cooking gas system Capacity of 10

cylinders(3+3) manifold

system with DBC click on

adapter, HP regulator

connector shut off valves,

unit valves with frame

connector and the ½” dia MS

pipe(16G) line, cost including

specials, welding, painting

pressure testing etc.

1 Each

3 Bulk cooking range600x600x600mm(Single

burner with cross supports)

As per drawing 2 Each

4 Bulk cooking

range1650x600x(850+150)mm(Three burner

with cross supports)

As per drawing 1 Each

5 5 container Bainmarie counter with one U/S

& 3 side covering tray

slider1800x(625+300)x850mm

As per drawing 1 Each

6 SS 3 tier trolly-950x600x 900mm As per drawing 2 Each

7 Plain pickup table with 2 under shelves, 2

OHS & 3 side

covering1200x(625+300)x(850+450+300)mm

As per drawing 1 Each

8 SS Work table with one under shelf & splash

– 1500x600x(850+150)mm

As per drawing 2 Each

9 SS Work table with sink, one U/S &

splash-1650x600x(850+150)mm

As per drawing 1 Each

10 Three sink washing unit with rear splash

& cross supports –

1650x600x(850+150)mm

As per drawing 1 Each

11 Drain table with cross supports &

Splash-1100x600x(850+150)mm

As per drawing 1 Each

12 Dosa/Chappathi plate with cross

supports-1500 x750x(850+150)mm

As per drawing 1 Each

13 Solid dish landing table with cross

supports &

splash1500x600x(850+150)mm

As per drawing 1 Each

14 Storage rack 5 tier-1800 x500x 1800mm As per drawing 1 Each

15 Granite table top with one under

shelf1500x750x(850+150)mm

As per drawing 1 Each

16 Dough Kneeder with SS boel-25Kg

capacity

As per drawing 1 Each

17 Water cooler-35 Ltrs. 1 Each

18 Wet Grinder-7 Ltr. Capacity 2 Each

19 Pot rack three tier-1200x600x 1500mm 1 Each

20 For door vertical freezer As per drawing 1 Each

21 Exhaust system(as per the instruction of

engineer in charge)

Supply exhaust blower 5HP 500

CFM static pressure 70mm water

column. Direct drive, 415 V rpm

with Dol starter and Exhaust

hood made out of 20swg sheet

with filter of SS hood size varies

3000-16500 x850 x500mm and

GI ducting(120gsm galvanized

sheet) with supports etc Cost

including Fan, accessories,

erection charges if any etc

1 Unit

22 Civil & Electrical related works for

providing and commissioning of the all

above equipments

As per the direction of Engineer

in-charge.(water & electrical lines

up to the existing sources)

LS (one

job)

Note 1 The quotation should include layout plan showing clearly the mentioned items

2 The offer shall include all related civil, electrical and plumbing works etc

3 Site will be handed over in as where as condition

4 Before doing the work, each things are approved by the engineer in-charge