densificator & autoclave
TRANSCRIPT
arc.itu.edu.tr
Densificator
AIM: The densificator decreases the volume fraction of VA-CNTs. The
working principle is only the enhancing of the density of VA-CNTs.
50 mm
Max Size:
20 mm
5 μm precision
in one way SEM Image of VA-CNTs_%10
SEM Image of VA-CNTs_%1
5 cm
arc.itu.edu.tr
Densificator
NOZZLES : All operating modes are working with special nozzles, which compatible with densificator
axes.
The user selects required nozzles in terms of initial dimensions of VA-CNT.
The direction of densifications are configurable with respect
to densification types.
9 cm
18 c
m
arc.itu.edu.tr
Mini Autoclave
AIM :
Basically, the
system is a
pressurized and
heated vessel
which is using for
the production of
fiber reinforced
composite
materials.
Process Temperature: 25oC – 180oC
Process Pressure: -0.9 bar – 7 bar
Whole Process controlled with PID
Controller38 cm
7 cm
arc.itu.edu.tr
Mini Autoclave
AIM :
Basically, the
system is a
pressurized and
heated vessel
which is using for
the production of
fiber reinforced
composite
materials.
Process Temperature: 25oC – 180oC
Process Pressure: -0.9 bar – 7 bar
Whole Process controlled with PID
Controller
38 cm
7 cm
arc.itu.edu.tr
CNT Yarn System
VA-CNT Block
Rotary Motion
Linear MotionAIM: The CNT
Yarn System try to
creates fiber, which is
composed of
VA-CNTs.
8 cm
PROCESS: The Motions can be using
simultaneously or separately.
Rotational Motion +
Linear Motion=
VA-CNT FIBERS
The speed of Linear and Rotational
Motions designate the quality of
VA-CNT Fibres.