demco gate valves - bhde gate valves resources/p06_demco … · • high pressure mud mixing lines...
TRANSCRIPT
DEMCO GATE VALVES
HOUsTON (281) 449-1010 / FORT WORTH (817) 696-0101 / ALiCE (361) 664-0472 / ViCTORiA (361) 578-7956
6
Demco Series DM Gate Valves, the premier designed Gate Valve in the oil and gas drilling market, specifically engi-neered for the rigorous requirements of oilfield applications. Designed for dependable, heavy duty performance inabrasive service conditions, DEMCO DM gate valves are commonly selected for a number of oilfield applications,including:
• Drilling standpipe manifold • Well treating and frac service• Pump manifold block valves • Production manifolds• High pressure mud mixing lines • Production gathering systems• High pressure drilling system block valve • Production flow lines• Wellheads
The DEMCO Series DM Gate valves are available in API working pressures 2000, 3000, 5000 psig (not monogrammed)and working pressure of 7500 psig.
An impressive inventory is maintained at each BHDE location for “Out of stock” deliveries of the 5000#, 7500#
valves and parts.
A DIVISION OF BOB HERBERT & ASSOCIATES, INC.www.bhde.com
Distributed & Inventoried by
7500# psiWp sERiEs DM
5000# psiWp sERiEs DM
Quality, Testing, and CertificationQuality system is based on ISO 9000 and API Q1 Requirements and is certified ISO 9001:2008.
All DEMCO Gate Valves are hydrostatically tested based on API-6A Latest Edition requirements. Demco 7500 Group 2 & 3 valves undergo additional test cycles, including low pressure seat test.
5000# wp valves 2" to 5" are available with ABS type approval on request.7500# wp valves 2" to 5" are available with ABS or DNV type approval on request.
BHDECat2014_Final_From080607 10/17/14 9:48 AM Page 6