Page 1 of 1

Data sheetLamella separator

Lamella separator for separating oil, gasoline and solid particles from wastewater, typically surfacewater/rainwater from larger paved areas such as parking lots, harbor areas and storage yards.

In the lamella separator, waste water is led through a lamella filter, which reduces the flow of water andcauses friction. Hereby particles settle, and oil adheres to the lamellas/ribs of the filter, where larger dropsof oil are created and flows to the surface. Due to the construction of the lamella separator the settled particles and oil are contained.

The separator is designed according to European standard DS/EN 858-1, and tested according to standardfor efficiency below 5 mg/l remains of oil in the waste water/minimum efficiency at 97 %.

10/20-100

10/20-200

20/40-400

30/60-600

40/80-800

50/100-1.000

75/150-1.500

100/200-1.800

120/240-2.200

160/320-2.600

200/400-3.000

1.250

1.500

1.600

2.000

2.300

2.500

2.800

3.000

3.500

4.000

4.500

3.000

3.500

3.500

3.500

4.000

4.000

4.500

4.500

5.000

5.000

5.000

250

300

400

500

500

800

800

1.000

1.250

1.250

1.500

Capacityl/sec.

Diametermm

Heightmm

Pipe connnectionØ mm

Inlet Outlet

Ventilation pipe

Lamella filter

Slurry trap

Access shaft

Buoyancy securing stand

Outlet sectorInlet sector

Oil accumulation