c:usersjondesktoppre-shipment inspection report · ts inspection inspector randomly selected 32pcs...

Inspection Report

TSInspection Service Address: 5B, Building D, Lily Star Plaza , Baige Road, Buji, Shenzhen, ChinaTel: +86 755 89335095, Fax: +86 755 89335096 E-mail:[email protected] Website: www.tsinspection.com

A. GENERALClient Name: XXXXXXXX

To: XXX

From : TS INSPECTION SERVICES

Project No.: HIE12110009

Report No.: HIE12110009

Inspection Date: 17-NOV-12

Report Issue Date: 17-NOV-12

Vendor/Supplier: XXXX (HK) ELECTRONICS CO. LTD

Factory Name: XXXXX (HK) ELECTRONICS CO. LTD

Factory Address: SHENZHEN

PO. No.: 20120/20119

Product Description: 10” MID TABLET 16:9/7” MID TABLET 16:9

Item/Product No.: GBT1040RS/ GBT740RS

Order Quantity: 500PCS+500PCS=1000PCSAvailableInspection Quantity:

1000PCS

Order Cartons: 75CTNS

Sample Size: 32PCS

Destination Country: UK

Origin Country: CHINA

Service Type : FINAL RANDOM INSPECTION

Re-inspection : NO

B. INSPECTION RESULT SUMMARYACCEPTED REJECTED PENDING N/A REMARKS*

PRODUCT CONFORMITY (Section A) XQUANTITY (Section D) X 13

WORKMANSHIP/APPEARANCE/FUNCTION (Section F) X

ON-SITE TESTS (Section G) X 7,8PACKING & ACCESSORIES

(Section H) X 13

LABELING&MARKING (Section I) X 10SHIPPING MARKS (Section J) X 9

CLIENT SPECIFICATION X

OVERALL RESULT(Final decision from client) Failed beyond AQL

* Refer to Section C for Remarks

Report Date:Nov.17,2012 Project No.: HIE12110009 Report No.: HIE12110009 of 36


C. IMPORTANT REMARKS

1The testing/measuring equipments applied during the inspection were all calibrated and within the period ofvalidity. Yes ( X ); No ( ).

2Client approved sample / inspection spec available for inspection reference at time of inspection:Sample: Yes ( ); No ( X ) -Factory Sample: Yes ( ).Client’s Check list.: Yes ( X ), Packing list no.(PI. no.):/ ;Date: / No ( ).

3 Actual instruction manual was conformed to the product inside. Yes ( X ); No ( );N/A( )

4 Actual gift box was conformed to the product inside. Yes ( X ); No ( );N/A( )

5 The brand name AND country of origin marking see section “I”.

6 Shipping mark details please see photo attachment.

7* Factory didn’t provide connection device for inspector to test ethernet

8* Factory did not provide equipment for high/low temperature test/ battery capacity/Hi-Pot test on adapter.

9* GBT1040RS: slight poor printing on shipping mark.

10* First digital of Bar code on gift box is not scanned out

11 WIFI test from minimum 25 metres-OK

12Touchscreen typing test with low battery and touchscreen typing test when connected to mains with lowbattery-OK

13* Production was 100% finished, but only packed 1carton per item for packing inspection

Photos To Follow:

REMARK 9 REMARK10

D. QUANTITY

PO. No. Item No. OrderQty

(PCS)

OrderQty

(CTN)

Inspection Qty(PCS) Sample Size

(PCS)No of Defects For Sample

PackedNot

PackedCR MA MI

20120 GBT1040RS 500 50 / 500 16 620119 GBT740RS 500 25 / 500 16 1 1



E. INSPECTION CRITERIA

Inspection Standard:ANSI/ASQ Z1.4 SINGLE SAMPLING PLAN(formerly known as MIL-STD-105)

General Inspection Level -Workmanship /Visual/Function

G-IAQL - Critical Defectives: Expected hazard of

human life, health or environmentNot

Allowed

[ X ] Normal Inspection[ ] Reduced Inspection[ ] Tightened Inspection

AQL - Major Defectives: Usability or life timeprobably significant affected

2.5

Sample Size–CRI/MAJ/MIN: 32/32/32AQL - Minor Defectives: Usability or life time

probably less or not affected4.0

F. WORKMANSHIP/APPEARANCE/ FUNCTION DEFECTIVESDescription Cri Maj Min

ITEM NO: (GBT740RS )

Broken on QC label 1

Sometimes touch screen malfunction 1

ITEM NO: GBT1040RS

Display blue screen when tear up the touch screen protective film 1

Screen flash /Unit dead when tear up the touch screen protective film 5

Total Found: 0 7 1Accept / Reject: 0/1 2/3 3/4

Result: ACC REJ ACCNote: A Defective is defined as a unit of product that contains one or more defects. A Defect is defined as any non-

conformance of the inspected unit of product with specified requirements. A single defect is taken into account per eachdefective unit, in every case the most serious defect exhibited by the individual sample being inspected regardless of thecharacteristic.

Photo To Follow

(GBT740RS )

Broken on QC label Sometimes touch screen malfunction



GBT1040RS

Display blue screen when tear up the touch screen protectivefilm

Screen flash /Unit dead when tear up the touchscreen protective film

Screen flash /Unit dead when tear up the touch screenprotective film

Screen flash /Unit dead when tear up the touchscreen protective film

G. ON-SITE TESTS:

Charging Test 4 HOURS

Discharge Test 3.5 HOURS

RAM(GBT740RS )7”1G

(GBT1040RS)10”1G

STORAGE(GBT740RS )7”4G

(GBT1040RS)10”8G

USB/SD Card Compatible PASS

Dead Pixel Check PASS



Office Software(Word, Excel, Email )

PASS

TF card PASS

Camera Function PASS

Touch Capacity PASS

Wifi Function PASS

3GP Test PASS

Online Chat Software(MSN)

PASS

Aging Test PASS

Video/Audio Function PASS

LCD Size Check PASS

Adhesion Test/Rub test PASS

MEASUREMENT DATA RECORD:1. TS Inspection inspector randomly selected 32 PCS for visual & testing inspection.2. TS Inspection inspector randomly selected 3 PCS/item for aging test.

Item No. S/N For Inspection S/N For Aging Test

/

H. PRODUCT PACKAGING INFORMATION

INDIVIDUAL PACKAGING: COLOR BOX

EXPORT CARTON DETAILS:

New or Used New

Sealing

Opaque Gummed Tape No

Material CardboardTransparent Gummed

Tape/

Corrugated Paper Plies 5 Paper Tape NoFastening - Metal Staples YES Strapping Nylon Band No

I. LABELING / WARNING / MARKING

Item No Brand NameCountry Of Origin

LocationSerial Number Location

GBT1040RSGBT740RS

XXXXCARTON/GIFT

BOX/UNIT/

J. SHIPPING MARKS

Shipping Marks on 2Side(s)

Side Marks on 2 Side(s)Display Box Marks

on/ Side(s)

Refer to photo Refer to photo Refer to photo

K. INFORMATION REMARKS



1[ 0 ] PCS of shipment samples were collected by inspector.[ 0 ] PCS of defective samples were collected by inspector.The factory was asked to send the sample to the: N/A

2 Inspection environmental conditions meet the requirement: Yes [ x ],No [ ]

3 Storage conditions meet the requirement: Yes [ x ],No [ ]

L. ATTACHMENTS

Photos of item No.: GBT1040RS



Photos of item No.: GBT740RS



2Photos of informationData measurement / field tests

AGING TEST SIZE TEST



SIZE TEST SIZE TEST

SIZE TEST SIZE TEST



SIZE TEST WEIGHT TEST

OPEN-1 OPEN -2

OPEN -3 OPEN -4



MENU-1 MENU -2

MENU-3 MENU-4



MENU-5 MENU-6

MENU-7 LANGUAGE TEST

STORAGE TEST RAM TEST



ABOUT TABLET TEST GRAVITY INDUCTION TEST

BROWSER TEST BROWSER TEST



CLOCK TEST CLOCK TEST

EMAIL TEST EMAIL TEST

CAMERA FUNCTION TEST CAMERA FUNCTION TEST



RECORDER TEST RECORDER TEST

CAMERA RECORD VIDEO FUNCTION TEST CAMERA RECORD VIDEO FUNCTION TEST



GAME TEST GAME TEST

WIFI FUNCTION TEST USB FUNCTION TEST

TF CARD TEST VOLUME TEST



PHONE TEST HDMI TEST

ZOOM TEST ZOOM TEST



MUSIC FUNCTION TEST VIDEO FUNCTION TEST

1280X720 FUNCTION TEST 1280X720 FUNCTION TEST

ADHESION TEST ADHESION TEST



MP4 FUNCTION TEST MP4 FUNCTION TEST

3G CARD TEST 3G CARD TEST



CONNECTION TEST CONNECTION TEST

Touchscreen typing tested and used when battery isbelow 30% - No Charger plugged in

Touchscreen typing tested and used whenbattery is below 30% - No Charger plugged in

Touchscreen typing tested and used when battery is below30% - Charger plugged in

Touchscreen typing tested and used when battery isbelow 30% - Charger plugged in



BARCODE TEST BARCODE TEST

BARCODE TEST BARCODE TEST

3 Other information:



NON PACKED NON PACKED

< REPORT>

The merchandise identified above was inspected for the client for quality, workmanship / construction and appearance. ThisInspection Result relates exclusively to the work ordered and the lot inspected.TSInspection inspector has discussed the results of this inspection with the authorized factory representative

Inspector Name: Susan Zhao Date: 2012-11-17

This Inspection Report shall not be reproduced（except in full version）without the written approval of TSInspection . Reports of TSInspection are issued for the exclusive use of the Customer towhom they are addressed. No quotation from reports or use of the TSI’s name is permitted except by TSI’s express written authorization. Reports apply only to the specific materials, products orprocesses tested, examined or surveyed and are not necessarily indicative of the qualities of apparently identical or similar materials, products or processes. Reports / Certificates of TSI do not relievesellers / suppliers from their contractual responsibilities with regard to the quality / quantity of the goods in delivery nor do they prejudice the Customer’s right to claim against sellers / suppliers forcompensation for any apparent and/or hidden defects not detected during TSI’s random inspection or testing or audit. The liability of TSI to the Customer in contract, tort (including negligence orbreach of statutory duty) or howsoever, and whatever the cause thereof, (a) for any loss of profit, business, contracts, revenues, or anticipating savings; or (b) for any special indirect or consequentialdamage of any nature whatsoever, shall be limited to the amount of the fee paid in respect of the specific Work(s) which give rise to such claim. [LIMITATION OF LIABILITY: If any liability on thepart of TSI shall arise (whether under the express or implied terms hereof or under the relevant Chinese laws and regulations) in contract, tort or infringement, the Customer’s right to recover damagesfor any loss of whatever nature caused by the fault or negligence of TSI or by any breach of its obligations or howsoever caused shall be limited to the payment by TSI of the amount of the contractprice under this Agreement and the said limitation of liability shall apply regardless of the form of action, whether in contract, tort, infringement or otherwise. In no event shall TSI be liable forincidental or consequential damage. The Customer hereby acknowledges and states that its losses and damages, whether direct or indirect, resulted therefrom will be sufficiently recovered by theabove amount of compensation and shall not raise any further claim against TSI beyond such amount. INDEMNITY: In the event of actual or threatened suit against TSI in relation to the servicesundertaken on behalf of the Customer or in relation to any of the Products or the Trade Mark or Patent of the Customer or of any allegation of infringement of any letters patent, registered design, trademark or trade name, the Customer shall indemnify TSI harmless from any liability, action, claim, demand, costs, charges and expenses arising there from or expense including solicitors fees, counsel’sfees in defending such action Provided Always that the Customer will at its own election either effect any settlement or compromise or at its own expense defend any such action or proceeding and theCustomer shall pay the costs of any settlement or compromise effected. All orders accepted and all reports and certificates issued are subject to the Terms and Conditions of Service and Stated Above.If there are any discrepancies between the Stated Above and Terms and Conditions of Service, the Stated Above will prevail. ]The inspection report reflects our findings at that time and place of inspection. This report or certificate does not relieve sellers/suppliers from their contractual responsibility with regards to thequality/quantity of this delivery nor does it prejudice Customer’s right to claim towards sellers/suppliers for compensation for any apparent and/or hidden defects not detected during TSI’s randominspection or testing or audit.

TSIGF08-001 (20081209)

End of Inspection Report

c:usersjondesktoppre-shipment inspection report · ts inspection inspector randomly selected 32pcs...

Documents