curriculum vitae- raghu b.s
TRANSCRIPT
Curriculum VitaeInstruments Engineer-II
RAGHU B.S Mob.: +91 9379238760Email: [email protected]
Career Objective
I am looking for a good position in the field of instruments and automation in a prestigious company where previous skills and capabilities can be put to efficient use. I possess effective organizational skills and the ability to supervise a team and develop the final output.
Personal DetailsProfile : Male, 25, Unmarried, Indian,Hindu
Current Position : Instrumentation Engineer -II
Current Location : Bangalore – India
VISA Status : Valid – Transferable
Passport detail : L3571659
Summary of Skills: About 4 years of experience as an instrumentation and control systems engineer in detailed
design and construction, maintenance, commissioning and development co-ordination of
instruments and control systems in Industrial Gas projects.
Configuring and faults diagnosis of Analyzers and Control Loops.
Installation, calibration and loop checking of the field instruments ( Emerson Rosemount, ABB,
Endress & Hauser, Bently Nevada, Honeywell, Yokogawa.......)
Maintenance and calibration of the control valves ( Pneumatic, Part turn, MOV, NRV,..... ) of
Flowserve, Metso,Samson, Bray, Valtek.
Experienced in flowmeters configuring (electromagnetic, orifice plate, ultrasonic, turbine, variable
area ) of ABB, Rosemount, Krohne.
Designing, Implementing and Commissioning of new control loops as per site requirements.
Review of control philosophy, P&I diagrams, cause & effect diagrams, instruments list, flow chart
Familiar with engineering standards ISA, IEEE, AIDG, SIL, ASMI , ANSI , NEMA , IEC ,EN,EL
Preparing master data sheet for PM schedule; ensuring safe and efficient performing of CM,CCL
Technical Support for the instrumentation team.
Experienced in the field instruments and control systems procurement activities
Spares balance investigation and inventory control for all instruments’ spare parts
Excellent communication interpersonal skills.
An effective communicator with excellent relationship building & interpersonal skills. Strong analytical, problem solving & organizational abilities. Possess a flexible & detail oriented attitude.
Follow-up with vendor for timely availability of material on site. Tracking material from dispatch to delivery at store and then to site. Inspected material of procurement at vendor site. Resolving deadlock by timely coordination with engineering department and vendor. Maintain records of goods ordered and received.
Educational Qualifications:2011........ Bachelor of Electronics and Communication Engineering, VTU university.........81.4%
2007........ P.U.C in P.C.M.B...............78.8%
Organizational Experience
Organization: Praxair India Pvt. LtdDuration: July 2011 to Till dateDesignation: Instruments Engineer- II
Project Description :-
Project #.1
Project Title: Air Separation Unit (N2 Plant: N500HP)
Client : IOCL
Consultant : PCI INDIA PVT LTD, Bangalore, India.
Location : Paradip,Odisha,India.
Duration : July 2011 – Jan-2012
Work Stream: Design and Construction Engineer.
Project #.2
Project Title: Air Separation Unit (Plant: T-1600)
Client : JSW
Location : Toranagallu,Karnataka,India.
Duration : Mar 2013 to October 2013
Work Stream: Design Engineer.
Project#.3
Project Title: Hydrogen Generating Unit (H2 Plant: 6.75THD)
Client : IOCL
Consultant : UHDE INDIA PVT LTD, Germany.
Sub Consultant: Elmatics India PVT LTD, Mumbai, India
Location : Paradip, Odisha, India.
Duration : Jan 2012 – Mar 2013
Work Stream: Construction and Commissioning Engineer.
Project #.4
Project Title: Air Separation Unit (Plant: T-1600)
Client : JSW-II
Location : Toranagallu, Karnataka, India.
Duration : May 2014 to April 2015
Work Stream: Design and Construction, Commissioning Engineer
Project #.5
Project Title: Air Separation Unit (Plant: T-1300 X 2)
Client : Sail Bhilai
Location : Bhilai, Chattishgarh, India.
Duration : Nov 2013 to April-2014.
Work Stream: Commissioning and Construction Engineer.
Project #.6
Project Title: Air Separation Unit (N2 Plant: N500HP)
Client : IOCL
Consultant : PCI INDIA PVT LTD, Bangalore, India.
Location : Paradip,Odisha,India.
Duration : 1-June-2014 to Aug-2015
Work Stream: Commissioning Engineer.
Project #.7
Project Title: Air Separation Unit (VM80L)
Client : Gareadu
Consultant : Praxair INDIA PVT LTD, Bangalore, India.
Location :Gareadu,Andra Pradesh ,India.
Duration : April 2015 – Till date
Work Stream: Design Engineer.
Responsibilities:-
Reporting periodically to Maintenance Manager; preparing KPI, PM, CCL and CM report.
Troubleshooting of redundant Profibus communication between 30 RTUs and the contrl room ;
comprising of 2 pair hot/standby controllers and pair of dual redundant scada servers.
Planning required upgradation for instruments to achieve production quality and cost minimizing.
Experience in selection of Instruments for Controlling Flow, Temperature, level and Pressure.
Experience in preparation Instrument Index, Instrument Location Plan, Process Data sheets and
Specifications, Instrument Wiring Layout, Instrument Air Routing Layout, Loop Drawing, JB
Layout, Cable Schedule, Cable Tray Layout, Hookup drawings, SWD and Control valve data
sheet.
Experience in preparation P&ID,FDP drawings and control principle for pressure reduction and
measuring station.
Experience in review of process control logic (Open loop & close loop) for all types of process
industries.
Experience in design of I/O assignment and P & ID for process control loop, BOM.
Experience in the preparation of Electrical cable Scheduled, HT/LT panel layout preparation,
cable tray layout.
Instrumentation Control and Electrical: Process measurement & control instrumentation &
services for monitoring, recording & optimizing manufacturing processes.
Experience in Execution of Control panel and JB wiring, FWD drawings
Experience in installation and tubing in analyzers, Fire alarm System, Emergency siren system,
Chiller and HVAC units.
Maintenance and calibration of pneumatic control valves ( Weir, Flowserve, Blackborough,..... )
and part turn actuated valves ( Bray, Airtorque,Flowtek,..... )
Maintenance and calibration of different analyzers : Conductivity, Chlorine, PH.
Maintenance and calibration of flowmeters ( electromagnetic, orifice plate, variable area, turbine,
ultrasonic..... ) , Krohne, Rosemount.
Maintenance and calibration of transmitters PT, LT, TT, DPT (Emerson Rosemount, Endress &
Hauser, ABB ,.....) and Monitran vibration transducers.
Calibrating and adjusting the dosing pumps (Prominent)
Ensure Spares balance and inventory control for all instruments’ spare parts.
Involved in the mixing plants erection works, commissioning and maintenance.
Cold Loop and Hot Loop checks.
Programming of plant microcontroller.
Commissioning of Control PLC and DCS Panels.
Testing of relays in the HT and LT panels.
Experience in Testing & Commissioning of Pressure, flow and temperature elements, Mass flow
meter and Controllers.
Experience in Hot and Cold loop check and Functional test.
Fully involved in Testing & commissioning of Air Separation Plant N500HP, T1300 X 2.
Commissioning of Gas Analyzers like Delta-f 310E, Ametek TM1200, Servomex 4104, Teledyne
analyzers 4020, 2000A , Moisture Analyzer Amtek 3050, Chillguard sensor RT131 etc………
Commissioning of Atmospheric Gas analyzer MSA system like Oxyen, LEL,Chlorine sensors
and Honeywell Oxygen sensors.
Planning and implementing additional control loops as per site requirements
Maintenance & calibration of Dryer temperature control system ( Honeywell )
Leading a team of five instrument technicians ,Workers around 50 members.
Maintenance & calibration of transmitters PT, LT , TT , DPT ( Rosemount, Yokogawa, Foxboro,
Honeywell......)
Maintenance & calibration of control system, and Bently Nevada 3000 Vibration measuring
system ( Acceleration, Velocity, Thrust, Vibration,......)
Maintenance and calibration of pneumatic control valves (Metso, Rotrek, Samson, Valtek)
Maintenance and calibration of orifice plate flowmeters ( Rosemount ) & Annubar, Corollis flow
meters.
Configuring of stack sampler set , and O2 analyzer
Trainings ISA ................... November 2014
Wireless Transmitter ................ December 2014
ISO 9001 : 2008 standards ................... March 2012
Control Valves ,trainee,.................................... January 2012
IT Skills Operating systems : Windows XP, 7.
Programs : AutoCAD, POPS,PXMCDB.
Internet : Very good
Programming languages : C, C++
PLC Programming : Ladder Diagram
Control Programs : Logic 5000X
LanguagesEnglish,Hindhi : Fluent; read, write and speakKannada : Mother tongue
AvailabilityEarliest start date: Given 8 weeks notice
___________________________________________________________________________________________________
Declaration
I hereby declare that all information stated above are true to the best of my knowledge.
Regards,
(RAGHU B.S)